Matrix Specification ==================== WARNING ======= .. WARNING:: The Matrix specification is still very much evolving: the API is not yet frozen and this document is in places incomplete, stale, and may contain security issues. Needless to say, we have made every effort to highlight the problem areas that we're aware of. We're publishing it at this point because it's complete enough to be more than useful and provide a canonical reference to how Matrix is evolving. Our end goal is to mirror WHATWG's `Living Standard `_ approach except right now Matrix is more in the process of being born than actually being living! .. contents:: Table of Contents .. sectnum:: Matrix is a new set of open APIs for open-federated Instant Messaging and VoIP functionality, designed to create and support a new global real-time communication ecosystem on the internet. This specification is the ongoing result of standardising the APIs used by the various components of the Matrix ecosystem to communicate with one another. The principles that Matrix attempts to follow are: - Pragmatic Web-friendly APIs (i.e. JSON over REST) - Keep It Simple & Stupid + provide a simple architecture with minimal third-party dependencies. - Fully open: + Fully open federation - anyone should be able to participate in the global Matrix network + Fully open standard - publicly documented standard with no IP or patent licensing encumbrances + Fully open source reference implementation - liberally-licensed example implementations with no IP or patent licensing encumbrances - Empowering the end-user + The user should be able to choose the server and clients they use + The user should be control how private their communication is + The user should know precisely where their data is stored - Fully decentralised - no single points of control over conversations or the network as a whole - Learning from history to avoid repeating it + Trying to take the best aspects of XMPP, SIP, IRC, SMTP, IMAP and NNTP whilst trying to avoid their failings The functionality that Matrix provides includes: - Creation and management of fully distributed chat rooms with no single points of control or failure - Eventually-consistent cryptographically secure synchronisation of room state across a global open network of federated servers and services - Sending and receiving extensible messages in a room with (optional) end-to-end encryption - Extensible user management (inviting, joining, leaving, kicking, banning) mediated by a power-level based user privilege system. - Extensible room state management (room naming, aliasing, topics, bans) - Extensible user profile management (avatars, displaynames, etc) - Managing user accounts (registration, login, logout) - Use of 3rd Party IDs (3PIDs) such as email addresses, phone numbers, Facebook accounts to authenticate, identify and discover users on Matrix. - Trusted federation of Identity servers for: + Publishing user public keys for PKI + Mapping of 3PIDs to Matrix IDs The end goal of Matrix is to be a ubiquitous messaging layer for synchronising arbitrary data between sets of people, devices and services - be that for instant messages, VoIP call setups, or any other objects that need to be reliably and persistently pushed from A to B in an interoperable and federated manner. Basis ===== Architecture ------------ Clients transmit data to other clients through home servers (HSes). Clients do not communicate with each other directly. :: How data flows between clients ============================== { Matrix client A } { Matrix client B } ^ | ^ | | events | | events | | V | V +------------------+ +------------------+ | |---------( HTTP )---------->| | | Home Server | | Home Server | | |<--------( HTTP )-----------| | +------------------+ Federation +------------------+ A "Client" typically represents a human using a web application or mobile app. Clients use the "Client-to-Server" (C-S) API to communicate with their home server, which stores their profile data and their record of the conversations in which they participate. Each client is associated with a user account (and may optionally support multiple user accounts). A user account is represented by a unique "User ID". This ID is namespaced to the home server which allocated the account and looks like:: @localpart:domain The ``localpart`` of a user ID may be a user name, or an opaque ID identifying this user. They are case-insensitive. .. TODO-spec - Need to specify precise grammar for Matrix IDs A "Home Server" is a server which provides C-S APIs and has the ability to federate with other HSes. It is typically responsible for multiple clients. "Federation" is the term used to describe the sharing of data between two or more home servers. Data in Matrix is encapsulated in an "event". An event is an action within the system. Typically each action (e.g. sending a message) correlates with exactly one event. Each event has a ``type`` which is used to differentiate different kinds of data. ``type`` values MUST be uniquely globally namespaced following Java's `package naming conventions `, e.g. ``com.example.myapp.event``. The special top-level namespace ``m.`` is reserved for events defined in the Matrix specification. Events are usually sent in the context of a "Room". Room structure ~~~~~~~~~~~~~~ A room is a conceptual place where users can send and receive events. Rooms can be created, joined and left. Events are sent to a room, and all participants in that room with sufficient access will receive the event. Rooms are uniquely identified internally via a "Room ID", which look like:: !opaque_id:domain There is exactly one room ID for each room. Whilst the room ID does contain a domain, it is simply for globally namespacing room IDs. The room does NOT reside on the domain specified. Room IDs are not meant to be human readable. They ARE case-sensitive. The following diagram shows an ``m.room.message`` event being sent in the room ``!qporfwt:matrix.org``:: { @alice:matrix.org } { @bob:domain.com } | ^ | | Room ID: !qporfwt:matrix.org Room ID: !qporfwt:matrix.org Event type: m.room.message Event type: m.room.message Content: { JSON object } Content: { JSON object } | | V | +------------------+ +------------------+ | Home Server | | Home Server | | matrix.org |<-------Federation------->| domain.com | +------------------+ +------------------+ | ................................. | |______| Shared State |_______| | Room ID: !qporfwt:matrix.org | | Servers: matrix.org, domain.com | | Members: | | - @alice:matrix.org | | - @bob:domain.com | |.................................| Federation maintains shared state between multiple home servers, such that when an event is sent to a room, the home server knows where to forward the event on to, and how to process the event. State is scoped to a single room, and federation ensures that all home servers have the information they need, even if that means the home server has to request more information from another home server before processing the event. Room Aliases ~~~~~~~~~~~~ Each room can also have multiple "Room Aliases", which looks like:: #room_alias:domain .. TODO - Need to specify precise grammar for Room Aliases A room alias "points" to a room ID and is the human-readable label by which rooms are publicised and discovered. The room ID the alias is pointing to can be obtained by visiting the domain specified. They are case-insensitive. Note that the mapping from a room alias to a room ID is not fixed, and may change over time to point to a different room ID. For this reason, Clients SHOULD resolve the room alias to a room ID once and then use that ID on subsequent requests. When resolving a room alias the server will also respond with a list of servers that are in the room that can be used to join via. :: GET #matrix:domain.com !aaabaa:matrix.org | ^ | | _______V____________________|____ | domain.com | | Mappings: | | #matrix >> !aaabaa:matrix.org | | #golf >> !wfeiofh:sport.com | | #bike >> !4rguxf:matrix.org | |________________________________| Identity ~~~~~~~~ Users in Matrix are identified via their user ID. However, existing ID namespaces can also be used in order to identify Matrix users. A Matrix "Identity" describes both the user ID and any other existing IDs from third party namespaces *linked* to their account. Matrix users can *link* third-party IDs (3PIDs) such as email addresses, social network accounts and phone numbers to their user ID. Linking 3PIDs creates a mapping from a 3PID to a user ID. This mapping can then be used by other Matrix users in order to discover other users, according to a strict set of privacy permissions. In order to ensure that the mapping from 3PID to user ID is genuine, a globally federated cluster of trusted "Identity Servers" (IS) are used to perform authentication of the 3PID. Identity servers are also used to preserve the mapping indefinitely, by replicating the mappings across multiple ISes. Usage of an IS is not required in order for a client application to be part of the Matrix ecosystem. However, without one clients will not be able to look up user IDs using 3PIDs. Presence ~~~~~~~~ .. NOTE:: This section is a work in progress. Each user has the concept of presence information. This encodes the "availability" of that user, suitable for display on other user's clients. This is transmitted as an ``m.presence`` event and is one of the few events which are sent *outside the context of a room*. The basic piece of presence information is represented by the ``presence`` key, which is an enum of one of the following: - ``online`` : The default state when the user is connected to an event stream. - ``unavailable`` : The user is not reachable at this time. - ``offline`` : The user is not connected to an event stream. - ``free_for_chat`` : The user is generally willing to receive messages moreso than default. - ``hidden`` : Behaves as offline, but allows the user to see the client state anyway and generally interact with client features. (Not yet implemented in synapse). This basic ``presence`` field applies to the user as a whole, regardless of how many client devices they have connected. The home server should synchronise this status choice among multiple devices to ensure the user gets a consistent experience. In addition, the server maintains a timestamp of the last time it saw an active action from the user; either sending a message to a room, or changing presence state from a lower to a higher level of availability (thus: changing state from ``unavailable`` to ``online`` will count as an action for being active, whereas in the other direction will not). This timestamp is presented via a key called ``last_active_ago``, which gives the relative number of miliseconds since the message is generated/emitted, that the user was last seen active. Home servers can also use the user's choice of presence state as a signal for how to handle new private one-to-one chat message requests. For example, it might decide: - ``free_for_chat`` : accept anything - ``online`` : accept from anyone in my addres book list - ``busy`` : accept from anyone in this "important people" group in my address book list Presence List +++++++++++++ Each user's home server stores a "presence list" for that user. This stores a list of other user IDs the user has chosen to add to it. To be added to this list, the user being added must receive permission from the list owner. Once granted, both user's HS(es) store this information. Since such subscriptions are likely to be bidirectional, HSes may wish to automatically accept requests when a reverse subscription already exists. As a convenience, presence lists should support the ability to collect users into groups, which could allow things like inviting the entire group to a new ("ad-hoc") chat room, or easy interaction with the profile information ACL implementation of the HS. Presence and Permissions ++++++++++++++++++++++++ For a viewing user to be allowed to see the presence information of a target user, either: - The target user has allowed the viewing user to add them to their presence list, or - The two users share at least one room in common In the latter case, this allows for clients to display some minimal sense of presence information in a user list for a room. Profiles ~~~~~~~~ .. NOTE:: This section is a work in progress. .. TODO-spec - Metadata extensibility Internally within Matrix users are referred to by their user ID, which is typically a compact unique identifier. Profiles grant users the ability to see human-readable names for other users that are in some way meaningful to them. Additionally, profiles can publish additional information, such as the user's age or location. A Profile consists of a display name, an avatar picture, and a set of other metadata fields that the user may wish to publish (email address, phone numbers, website URLs, etc...). This specification puts no requirements on the display name other than it being a valid unicode string. Avatar images are not stored directly; instead the home server stores an ``http``-scheme URL where clients may fetch it from. API Standards ------------- The mandatory baseline for communication in Matrix is exchanging JSON objects over RESTful HTTP APIs. HTTPS is mandated as the baseline for server-server (federation) communication. HTTPS is recommended for client-server communication, although HTTP may be supported as a fallback to support basic HTTP clients. More efficient optional transports for client-server communication will in future be supported as optional extensions - e.g. a packed binary encoding over stream-cipher encrypted TCP socket for low-bandwidth/low-roundtrip mobile usage. .. TODO We need to specify capability negotiation for extensible transports For the default HTTP transport, all API calls use a Content-Type of ``application/json``. In addition, all strings MUST be encoded as UTF-8. Clients are authenticated using opaque ``access_token`` strings (see `Registration and Login`_ for details), passed as a query string parameter on all requests. .. TODO Need to specify any HMAC or access_token lifetime/ratcheting tricks Any errors which occur on the Matrix API level MUST return a "standard error response". This is a JSON object which looks like:: { "errcode": "", "error": "" } The ``error`` string will be a human-readable error message, usually a sentence explaining what went wrong. The ``errcode`` string will be a unique string which can be used to handle an error message e.g. ``M_FORBIDDEN``. These error codes should have their namespace first in ALL CAPS, followed by a single _. For example, if there was a custom namespace ``com.mydomain.here``, and a ``FORBIDDEN`` code, the error code should look like ``COM.MYDOMAIN.HERE_FORBIDDEN``. There may be additional keys depending on the error, but the keys ``error`` and ``errcode`` MUST always be present. Some standard error codes are below: :``M_FORBIDDEN``: Forbidden access, e.g. joining a room without permission, failed login. :``M_UNKNOWN_TOKEN``: The access token specified was not recognised. :``M_BAD_JSON``: Request contained valid JSON, but it was malformed in some way, e.g. missing required keys, invalid values for keys. :``M_NOT_JSON``: Request did not contain valid JSON. :``M_NOT_FOUND``: No resource was found for this request. :``M_LIMIT_EXCEEDED``: Too many requests have been sent in a short period of time. Wait a while then try again. Some requests have unique error codes: :``M_USER_IN_USE``: Encountered when trying to register a user ID which has been taken. :``M_ROOM_IN_USE``: Encountered when trying to create a room which has been taken. :``M_BAD_PAGINATION``: Encountered when specifying bad pagination query parameters. :``M_LOGIN_EMAIL_URL_NOT_YET``: Encountered when polling for an email link which has not been clicked yet. The C-S API typically uses ``HTTP POST`` to submit requests. This means these requests are not idempotent. The C-S API also allows ``HTTP PUT`` to make requests idempotent. In order to use a ``PUT``, paths should be suffixed with ``/{txnId}``. ``{txnId}`` is a unique client-generated transaction ID which identifies the request, and is scoped to a given Client (identified by that client's ``access_token``). Crucially, it **only** serves to identify new requests from retransmits. After the request has finished, the ``{txnId}`` value should be changed (how is not specified; a monotonically increasing integer is recommended). It is preferable to use ``HTTP PUT`` to make sure requests to send messages do not get sent more than once should clients need to retransmit requests. Valid requests look like:: POST /some/path/here?access_token=secret { "key": "This is a post." } PUT /some/path/here/11?access_token=secret { "key": "This is a put with a txnId of 11." } In contrast, these are invalid requests:: POST /some/path/here/11?access_token=secret { "key": "This is a post, but it has a txnId." } PUT /some/path/here?access_token=secret { "key": "This is a put but it is missing a txnId." } Glossary -------- .. NOTE:: This section is a work in progress. Backfilling: The process of synchronising historic state from one home server to another, to backfill the event storage so that scrollback can be presented to the client(s). Not to be confused with pagination. Context: A single human-level entity of interest (currently, a chat room) EDU (Ephemeral Data Unit): A message that relates directly to a given pair of home servers that are exchanging it. EDUs are short-lived messages that related only to one single pair of servers; they are not persisted for a long time and are not forwarded on to other servers. Because of this, they have no internal ID nor previous EDUs reference chain. Event: A record of activity that records a single thing that happened on to a context (currently, a chat room). These are the "chat messages" that Synapse makes available. PDU (Persistent Data Unit): A message that relates to a single context, irrespective of the server that is communicating it. PDUs either encode a single Event, or a single State change. A PDU is referred to by its PDU ID; the pair of its origin server and local reference from that server. PDU ID: The pair of PDU Origin and PDU Reference, that together globally uniquely refers to a specific PDU. PDU Origin: The name of the origin server that generated a given PDU. This may not be the server from which it has been received, due to the way they are copied around from server to server. The origin always records the original server that created it. PDU Reference: A local ID used to refer to a specific PDU from a given origin server. These references are opaque at the protocol level, but may optionally have some structured meaning within a given origin server or implementation. Presence: The concept of whether a user is currently online, how available they declare they are, and so on. See also: doc/model/presence Profile: A set of metadata about a user, such as a display name, provided for the benefit of other users. See also: doc/model/profiles Room ID: An opaque string (of as-yet undecided format) that identifies a particular room and used in PDUs referring to it. Room Alias: A human-readable string of the form #name:some.domain that users can use as a pointer to identify a room; a Directory Server will map this to its Room ID State: A set of metadata maintained about a Context, which is replicated among the servers in addition to the history of Events. User ID: A string of the form @localpart:domain.name that identifies a user for wire-protocol purposes. The localpart is meaningless outside of a particular home server. This takes a human-readable form that end-users can use directly if they so wish, avoiding the 3PIDs. Transaction: A message which relates to the communication between a given pair of servers. A transaction contains possibly-empty lists of PDUs and EDUs. .. TODO This glossary contradicts the terms used above - especially on State Events v. "State" and Non-State Events v. "Events". We need better consistent names. Events ====== Receiving live updates on a client ---------------------------------- Clients can receive new events by long-polling the home server. This will hold open the HTTP connection for a short period of time waiting for new events, returning early if an event occurs. This is called the `Event Stream`_. All events which are visible to the client will appear in the event stream. When the request returns, an ``end`` token is included in the response. This token can be used in the next request to continue where the client left off. .. TODO-spec How do we filter the event stream? Do we ever return multiple events in a single request? Don't we get lots of request setup RTT latency if we only do one event per request? Do we ever support streaming requests? Why not websockets? When the client first logs in, they will need to initially synchronise with their home server. This is achieved via the |initialSync|_ API. This API also returns an ``end`` token which can be used with the event stream. Room Events ----------- .. NOTE:: This section is a work in progress. This specification outlines several standard event types, all of which are prefixed with ``m.`` ``m.room.name`` Summary: Set the human-readable name for the room. Type: State event JSON format: ``{ "name" : "string" }`` Example: ``{ "name" : "My Room" }`` Description: A room has an opaque room ID which is not human-friendly to read. A room alias is human-friendly, but not all rooms have room aliases. The room name is a human-friendly string designed to be displayed to the end-user. The room name is not *unique*, as multiple rooms can have the same room name set. The room name can also be set when creating a room using |createRoom|_ with the ``name`` key. ``m.room.topic`` Summary: Set a topic for the room. Type: State event JSON format: ``{ "topic" : "string" }`` Example: ``{ "topic" : "Welcome to the real world." }`` Description: A topic is a short message detailing what is currently being discussed in the room. It can also be used as a way to display extra information about the room, which may not be suitable for the room name. The room topic can also be set when creating a room using |createRoom|_ with the ``topic`` key. ``m.room.member`` Summary: The current membership state of a user in the room. Type: State event JSON format: ``{ "membership" : "enum[ invite|join|leave|ban ]" }`` Example: ``{ "membership" : "join" }`` Description: Adjusts the membership state for a user in a room. It is preferable to use the membership APIs (``/rooms//invite`` etc) when performing membership actions rather than adjusting the state directly as there are a restricted set of valid transformations. For example, user A cannot force user B to join a room, and trying to force this state change directly will fail. See the `Rooms`_ section for how to use the membership APIs. ``m.room.create`` Summary: The first event in the room. Type: State event JSON format: ``{ "creator": "string"}`` Example: ``{ "creator": "@user:example.com" }`` Description: This is the first event in a room and cannot be changed. It acts as the root of all other events. ``m.room.join_rules`` Summary: Descripes how/if people are allowed to join. Type: State event JSON format: ``{ "join_rule": "enum [ public|knock|invite|private ]" }`` Example: ``{ "join_rule": "public" }`` Description: TODO-doc : Use docs/models/rooms.rst ``m.room.power_levels`` Summary: Defines the power levels of users in the room. Type: State event JSON format: ``{ "": , ..., "default": }`` Example: ``{ "@user:example.com": 5, "@user2:example.com": 10, "default": 0 }`` Description: If a user is in the list, then they have the associated power level. Otherwise they have the default level. If not ``default`` key is supplied, it is assumed to be 0. ``m.room.add_state_level`` Summary: Defines the minimum power level a user needs to add state. Type: State event JSON format: ``{ "level": }`` Example: ``{ "level": 5 }`` Description: To add a new piece of state to the room a user must have the given power level. This does not apply to updating current state, which is goverened by the ``required_power_level`` event key. ``m.room.send_event_level`` Summary: Defines the minimum power level a user needs to send an event. Type: State event JSON format: ``{ "level": }`` Example: ``{ "level": 0 }`` Description: To send a new event into the room a user must have at least this power level. This allows ops to make the room read only by increasing this level, or muting individual users by lowering their power level below this threshold. ``m.room.ops_levels`` Summary: Defines the minimum power levels that a user must have before they can kick and/or ban other users. Type: State event JSON format: ``{ "ban_level": , "kick_level": , "redact_level": }`` Example: ``{ "ban_level": 5, "kick_level": 5 }`` Description: This defines who can ban and/or kick people in the room. Most of the time ``ban_level`` will be greater than or equal to ``kick_level`` since banning is more severe than kicking. ``m.room.aliases`` Summary: These state events are used to inform the room about what room aliases it has. Type: State event JSON format: ``{ "aliases": ["string", ...] }`` Example: ``{ "aliases": ["#foo:example.com"] }`` Description: This event is sent by a homeserver directly to inform of changes to the list of aliases it knows about for that room. As a special-case, the ``state_key`` of the event is the homeserver which owns the room alias. For example, an event might look like:: { "type": "m.room.aliases", "event_id": "012345678ab", "room_id": "!xAbCdEfG:example.com", "state_key": "example.com", "content": { "aliases": ["#foo:example.com"] } } The event contains the full list of aliases now stored by the home server that emitted it; additions or deletions are not explicitly mentioned as being such. The entire set of known aliases for the room is then the union of the individual lists declared by all such keys, one from each home server holding at least one alias. Clients `should` check the validity of any room alias given in this list before presenting it to the user as trusted fact. The lists given by this event should be considered simply as advice on which aliases might exist, for which the client can perform the lookup to confirm whether it receives the correct room ID. ``m.room.message`` Summary: A message. Type: Non-state event JSON format: ``{ "msgtype": "string" }`` Example: ``{ "msgtype": "m.text", "body": "Testing" }`` Description: This event is used when sending messages in a room. Messages are not limited to be text. The ``msgtype`` key outlines the type of message, e.g. text, audio, image, video, etc. Whilst not required, the ``body`` key SHOULD be used with every kind of ``msgtype`` as a fallback mechanism when a client cannot render the message. For more information on the types of messages which can be sent, see `m.room.message msgtypes`_. ``m.room.message.feedback`` Summary: A receipt for a message. Type: Non-state event JSON format: ``{ "type": "enum [ delivered|read ]", "target_event_id": "string" }`` Example: ``{ "type": "delivered", "target_event_id": "e3b2icys" }`` Description: Feedback events are events sent to acknowledge a message in some way. There are two supported acknowledgements: ``delivered`` (sent when the event has been received) and ``read`` (sent when the event has been observed by the end-user). The ``target_event_id`` should reference the ``m.room.message`` event being acknowledged. ``m.room.redaction`` Summary: Indicates a previous event has been redacted. Type: Non-state event JSON format: ``{ "reason": "string" }`` Description: Events can be redacted by either room or server admins. Redacting an event means that all keys not required by the protocol are stripped off, allowing admins to remove offensive or illegal content that may have been attached to any event. This cannot be undone, allowing server owners to physically delete the offending data. There is also a concept of a moderator hiding a non-state event, which can be undone, but cannot be applied to state events. The event that has been redacted is specified in the ``redacts`` event level key. m.room.message msgtypes ~~~~~~~~~~~~~~~~~~~~~~~ .. TODO-spec How a client should handle unknown message types. Each ``m.room.message`` MUST have a ``msgtype`` key which identifies the type of message being sent. Each type has their own required and optional keys, as outlined below: ``m.text`` Required keys: - ``body`` : "string" - The body of the message. Optional keys: None. Example: ``{ "msgtype": "m.text", "body": "I am a fish" }`` ``m.emote`` Required keys: - ``body`` : "string" - The emote action to perform. Optional keys: None. Example: ``{ "msgtype": "m.emote", "body": "tries to come up with a witty explanation" }`` ``m.image`` Required keys: - ``url`` : "string" - The URL to the image. Optional keys: - ``info`` : "string" - info : JSON object (ImageInfo) - The image info for image referred to in ``url``. - ``thumbnail_url`` : "string" - The URL to the thumbnail. - ``thumbnail_info`` : JSON object (ImageInfo) - The image info for the image referred to in ``thumbnail_url``. - ``body`` : "string" - The alt text of the image, or some kind of content description for accessibility e.g. "image attachment". ImageInfo: Information about an image:: { "size" : integer (size of image in bytes), "w" : integer (width of image in pixels), "h" : integer (height of image in pixels), "mimetype" : "string (e.g. image/jpeg)", } ``m.audio`` Required keys: - ``url`` : "string" - The URL to the audio. Optional keys: - ``info`` : JSON object (AudioInfo) - The audio info for the audio referred to in ``url``. - ``body`` : "string" - A description of the audio e.g. "Bee Gees - Stayin' Alive", or some kind of content description for accessibility e.g. "audio attachment". AudioInfo: Information about a piece of audio:: { "mimetype" : "string (e.g. audio/aac)", "size" : integer (size of audio in bytes), "duration" : integer (duration of audio in milliseconds), } ``m.video`` Required keys: - ``url`` : "string" - The URL to the video. Optional keys: - ``info`` : JSON object (VideoInfo) - The video info for the video referred to in ``url``. - ``body`` : "string" - A description of the video e.g. "Gangnam style", or some kind of content description for accessibility e.g. "video attachment". VideoInfo: Information about a video:: { "mimetype" : "string (e.g. video/mp4)", "size" : integer (size of video in bytes), "duration" : integer (duration of video in milliseconds), "w" : integer (width of video in pixels), "h" : integer (height of video in pixels), "thumbnail_url" : "string (URL to image)", "thumbanil_info" : JSON object (ImageInfo) } ``m.location`` Required keys: - ``geo_uri`` : "string" - The geo URI representing the location. Optional keys: - ``thumbnail_url`` : "string" - The URL to a thumnail of the location being represented. - ``thumbnail_info`` : JSON object (ImageInfo) - The image info for the image referred to in ``thumbnail_url``. - ``body`` : "string" - A description of the location e.g. "Big Ben, London, UK", or some kind of content description for accessibility e.g. "location attachment". The following keys can be attached to any ``m.room.message``: Optional keys: - ``sender_ts`` : integer - A timestamp (ms resolution) representing the wall-clock time when the message was sent from the client. Events on Change of Profile Information ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Because the profile displayname and avatar information are likely to be used in many places of a client's display, changes to these fields cause an automatic propagation event to occur, informing likely-interested parties of the new values. This change is conveyed using two separate mechanisms: - a ``m.room.member`` event is sent to every room the user is a member of, to update the ``displayname`` and ``avatar_url``. - a presence status update is sent, again containing the new values of the ``displayname`` and ``avatar_url`` keys, in addition to the required ``presence`` key containing the current presence state of the user. Both of these should be done automatically by the home server when a user successfully changes their displayname or avatar URL fields. Additionally, when home servers emit room membership events for their own users, they should include the displayname and avatar URL fields in these events so that clients already have these details to hand, and do not have to perform extra roundtrips to query it. Voice over IP ------------- Matrix can also be used to set up VoIP calls. This is part of the core specification, although is still in a very early stage. Voice (and video) over Matrix is based on the WebRTC standards. Call events are sent to a room, like any other event. This means that clients must only send call events to rooms with exactly two participants as currently the WebRTC standard is based around two-party communication. Events ~~~~~~ ``m.call.invite`` This event is sent by the caller when they wish to establish a call. Required keys: - ``call_id`` : "string" - A unique identifier for the call - ``offer`` : "offer object" - The session description - ``version`` : "integer" - The version of the VoIP specification this message adheres to. This specification is version 0. - ``lifetime`` : "integer" - The time in milliseconds that the invite is valid for. Once the invite age exceeds this value, clients should discard it. They should also no longer show the call as awaiting an answer in the UI. Optional keys: None. Example: ``{ "version" : 0, "call_id": "12345", "offer": { "type" : "offer", "sdp" : "v=0\r\no=- 6584580628695956864 2 IN IP4 127.0.0.1[...]" } }`` ``Offer Object`` Required keys: - ``type`` : "string" - The type of session description, in this case 'offer' - ``sdp`` : "string" - The SDP text of the session description ``m.call.candidates`` This event is sent by callers after sending an invite and by the callee after answering. Its purpose is to give the other party additional ICE candidates to try using to communicate. Required keys: - ``call_id`` : "string" - The ID of the call this event relates to - ``version`` : "integer" - The version of the VoIP specification this messages adheres to. his specification is version 0. - ``candidates`` : "array of candidate objects" - Array of object describing the candidates. ``Candidate Object`` Required Keys: - ``sdpMid`` : "string" - The SDP media type this candidate is intended for. - ``sdpMLineIndex`` : "integer" - The index of the SDP 'm' line this candidate is intended for - ``candidate`` : "string" - The SDP 'a' line of the candidate ``m.call.answer`` Required keys: - ``call_id`` : "string" - The ID of the call this event relates to - ``version`` : "integer" - The version of the VoIP specification this messages - ``answer`` : "answer object" - Object giving the SDK answer ``Answer Object`` Required keys: - ``type`` : "string" - The type of session description. 'answer' in this case. - ``sdp`` : "string" - The SDP text of the session description ``m.call.hangup`` Sent by either party to signal their termination of the call. This can be sent either once the call has has been established or before to abort the call. Required keys: - ``call_id`` : "string" - The ID of the call this event relates to - ``version`` : "integer" - The version of the VoIP specification this messages Message Exchange ~~~~~~~~~~~~~~~~ A call is set up with messages exchanged as follows: :: Caller Callee m.call.invite -----------> m.call.candidate --------> [more candidates events] User answers call <------ m.call.answer [...] <------ m.call.hangup Or a rejected call: :: Caller Callee m.call.invite -----------> m.call.candidate --------> [more candidates events] User rejects call <------- m.call.hangup Calls are negotiated according to the WebRTC specification. Glare ~~~~~ This specification aims to address the problem of two users calling each other at roughly the same time and their invites crossing on the wire. It is a far better experience for the users if their calls are connected if it is clear that their intention is to set up a call with one another. In Matrix, calls are to rooms rather than users (even if those rooms may only contain one other user) so we consider calls which are to the same room. The rules for dealing with such a situation are as follows: - If an invite to a room is received whilst the client is preparing to send an invite to the same room, the client should cancel its outgoing call and instead automatically accept the incoming call on behalf of the user. - If an invite to a room is received after the client has sent an invite to the same room and is waiting for a response, the client should perform a lexicographical comparison of the call IDs of the two calls and use the lesser of the two calls, aborting the greater. If the incoming call is the lesser, the client should accept this call on behalf of the user. The call setup should appear seamless to the user as if they had simply placed a call and the other party had accepted. Thusly, any media stream that had been setup for use on a call should be transferred and used for the call that replaces it. Client-Server API ================= Registration and Login ---------------------- Clients must register with a home server in order to use Matrix. After registering, the client will be given an access token which must be used in ALL requests to that home server as a query parameter 'access_token'. If the client has already registered, they need to be able to login to their account. The home server may provide many different ways of logging in, such as user/password auth, login via a social network (OAuth2), login by confirming a token sent to their email address, etc. This specification does not define how home servers should authorise their users who want to login to their existing accounts, but instead defines the standard interface which implementations should follow so that ANY client can login to ANY home server. Clients login using the |login|_ API. Clients register using the |register|_ API. Registration follows the same general procedure as login, but the path requests are sent to and the details contained in them are different. In both registration and login cases, the process takes the form of one or more stages, where at each stage the client submits a set of data for a given stage type and awaits a response from the server, which will either be a final success or a request to perform an additional stage. This exchange continues until the final success. In order to determine up-front what the server's requirements are, the client can request from the server a complete description of all of its acceptable flows of the registration or login process. It can then inspect the list of returned flows looking for one for which it believes it can complete all of the required stages, and perform it. As each home server may have different ways of logging in, the client needs to know how they should login. All distinct login stages MUST have a corresponding ``type``. A ``type`` is a namespaced string which details the mechanism for logging in. A client may be able to login via multiple valid login flows, and should choose a single flow when logging in. A flow is a series of login stages. The home server MUST respond with all the valid login flows when requested by a simple ``GET`` request directly to the ``/login`` or ``/register`` paths:: { "flows": [ { "type": "", "stages": [ "", "" ] }, { "type": "", "stages": [ "", "" ] }, { "type": "" } ] } The client can now select which flow it wishes to use, and begin making ``POST`` requests to the ``/login`` or ``/register`` paths with JSON body content containing the name of the stage as the ``type`` key, along with whatever additional parameters are required for that login or registration type (see below). After the flow is completed, the client's fully-qualified user ID and a new access token MUST be returned:: { "user_id": "@user:matrix.org", "access_token": "abcdef0123456789" } The ``user_id`` key is particularly useful if the home server wishes to support localpart entry of usernames (e.g. "user" rather than "@user:matrix.org"), as the client may not be able to determine its ``user_id`` in this case. If the flow has multiple stages to it, the home server may wish to create a session to store context between requests. If a home server responds with a ``session`` key to a request, clients MUST submit it in subsequent requests until the flow is completed:: { "session": "" } This specification defines the following login types: - ``m.login.password`` - ``m.login.oauth2`` - ``m.login.email.code`` - ``m.login.email.url`` - ``m.login.email.identity`` Password-based ~~~~~~~~~~~~~~ :Type: ``m.login.password`` :Description: Login is supported via a username and password. To respond to this type, reply with:: { "type": "m.login.password", "user": "", "password": "" } The home server MUST respond with either new credentials, the next stage of the login process, or a standard error response. OAuth2-based ~~~~~~~~~~~~ :Type: ``m.login.oauth2`` :Description: Login is supported via OAuth2 URLs. This login consists of multiple requests. To respond to this type, reply with:: { "type": "m.login.oauth2", "user": "" } The server MUST respond with:: { "uri": } The home server acts as a 'confidential' client for the purposes of OAuth2. If the uri is a ``sevice selection URI``, it MUST point to a webpage which prompts the user to choose which service to authorize with. On selection of a service, this MUST link through to an ``Authorization Request URI``. If there is only 1 service which the home server accepts when logging in, this indirection can be skipped and the "uri" key can be the ``Authorization Request URI``. The client then visits the ``Authorization Request URI``, which then shows the OAuth2 Allow/Deny prompt. Hitting 'Allow' returns the ``redirect URI`` with the auth code. Home servers can choose any path for the ``redirect URI``. The client should visit the ``redirect URI``, which will then finish the OAuth2 login process, granting the home server an access token for the chosen service. When the home server gets this access token, it verifies that the cilent has authorised with the 3rd party, and can now complete the login. The OAuth2 ``redirect URI`` (with auth code) MUST respond with either new credentials, the next stage of the login process, or a standard error response. For example, if a home server accepts OAuth2 from Google, it would return the Authorization Request URI for Google:: { "uri": "https://accounts.google.com/o/oauth2/auth?response_type=code& client_id=CLIENT_ID&redirect_uri=REDIRECT_URI&scope=photos" } The client then visits this URI and authorizes the home server. The client then visits the REDIRECT_URI with the auth code= query parameter which returns:: { "user_id": "@user:matrix.org", "access_token": "0123456789abcdef" } Email-based (code) ~~~~~~~~~~~~~~~~~~ :Type: ``m.login.email.code`` :Description: Login is supported by typing in a code which is sent in an email. This login consists of multiple requests. To respond to this type, reply with:: { "type": "m.login.email.code", "user": "", "email": "" } After validating the email address, the home server MUST send an email containing an authentication code and return:: { "type": "m.login.email.code", "session": "" } The second request in this login stage involves sending this authentication code:: { "type": "m.login.email.code", "session": "", "code": "" } The home server MUST respond to this with either new credentials, the next stage of the login process, or a standard error response. Email-based (url) ~~~~~~~~~~~~~~~~~ :Type: ``m.login.email.url`` :Description: Login is supported by clicking on a URL in an email. This login consists of multiple requests. To respond to this type, reply with:: { "type": "m.login.email.url", "user": "", "email": "" } After validating the email address, the home server MUST send an email containing an authentication URL and return:: { "type": "m.login.email.url", "session": "" } The email contains a URL which must be clicked. After it has been clicked, the client should perform another request:: { "type": "m.login.email.url", "session": "" } The home server MUST respond to this with either new credentials, the next stage of the login process, or a standard error response. A common client implementation will be to periodically poll until the link is clicked. If the link has not been visited yet, a standard error response with an errcode of ``M_LOGIN_EMAIL_URL_NOT_YET`` should be returned. Email-based (identity server) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ :Type: ``m.login.email.identity`` :Description: Login is supported by authorising an email address with an identity server. Prior to submitting this, the client should authenticate with an identity server. After authenticating, the session information should be submitted to the home server. To respond to this type, reply with:: { "type": "m.login.email.identity", "threepidCreds": [ { "sid": "", "clientSecret": "", "idServer": "" } ] } N-Factor Authentication ~~~~~~~~~~~~~~~~~~~~~~~ Multiple login stages can be combined to create N-factor authentication during login. This can be achieved by responding with the ``next`` login type on completion of a previous login stage:: { "next": "" } If a home server implements N-factor authentication, it MUST respond with all ``stages`` when initially queried for their login requirements:: { "type": "<1st login type>", "stages": [ <1st login type>, <2nd login type>, ... , ] } This can be represented conceptually as:: _______________________ | Login Stage 1 | | type: "" | | ___________________ | | |_Request_1_________| | <-- Returns "session" key which is used throughout. | ___________________ | | |_Request_2_________| | <-- Returns a "next" value of "login type2" |_______________________| | | _________V_____________ | Login Stage 2 | | type: "" | | ___________________ | | |_Request_1_________| | | ___________________ | | |_Request_2_________| | | ___________________ | | |_Request_3_________| | <-- Returns a "next" value of "login type3" |_______________________| | | _________V_____________ | Login Stage 3 | | type: "" | | ___________________ | | |_Request_1_________| | <-- Returns user credentials |_______________________| Fallback ~~~~~~~~ Clients cannot be expected to be able to know how to process every single login type. If a client determines it does not know how to handle a given login type, it should request a login fallback page:: GET matrix/client/api/v1/login/fallback This MUST return an HTML page which can perform the entire login process. Rooms ----- Creation ~~~~~~~~ To create a room, a client has to use the |createRoom|_ API. There are various options which can be set when creating a room: ``visibility`` Type: String Optional: Yes Value: Either ``public`` or ``private``. Description: A ``public`` visibility indicates that the room will be shown in the public room list. A ``private`` visibility will hide the room from the public room list. Rooms default to ``private`` visibility if this key is not included. ``room_alias_name`` Type: String Optional: Yes Value: The room alias localpart. Description: If this is included, a room alias will be created and mapped to the newly created room. The alias will belong on the same home server which created the room, e.g. ``!qadnasoi:domain.com >>> #room_alias_name:domain.com`` ``name`` Type: String Optional: Yes Value: The ``name`` value for the ``m.room.name`` state event. Description: If this is included, an ``m.room.name`` event will be sent into the room to indicate the name of the room. See `Room Events`_ for more information on ``m.room.name``. ``topic`` Type: String Optional: Yes Value: The ``topic`` value for the ``m.room.topic`` state event. Description: If this is included, an ``m.room.topic`` event will be sent into the room to indicate the topic for the room. See `Room Events`_ for more information on ``m.room.topic``. ``invite`` Type: List Optional: Yes Value: A list of user ids to invite. Description: This will tell the server to invite everyone in the list to the newly created room. Example:: { "visibility": "public", "room_alias_name": "thepub", "name": "The Grand Duke Pub", "topic": "All about happy hour" } The home server will create a ``m.room.create`` event when the room is created, which serves as the root of the PDU graph for this room. This event also has a ``creator`` key which contains the user ID of the room creator. It will also generate several other events in order to manage permissions in this room. This includes: - ``m.room.power_levels`` : Sets the power levels of users. - ``m.room.join_rules`` : Whether the room is "invite-only" or not. - ``m.room.add_state_level``: The power level required in order to add new state to the room (as opposed to updating exisiting state) - ``m.room.send_event_level`` : The power level required in order to send a message in this room. - ``m.room.ops_level`` : The power level required in order to kick or ban a user from the room or redact an event in the room. See `Room Events`_ for more information on these events. Room aliases ~~~~~~~~~~~~ .. NOTE:: This section is a work in progress. Room aliases can be created by sending a ``PUT /directory/room/``:: { "room_id": } They can be deleted by sending a ``DELETE /directory/room/`` with no content. Only some privileged users may be able to delete room aliases, e.g. server admins, the creator of the room alias, etc. This specification does not outline the privilege level required for deleting room aliases. As room aliases are scoped to a particular home server domain name, it is likely that a home server will reject attempts to maintain aliases on other domain names. This specification does not provide a way for home servers to send update requests to other servers. Rooms store a *partial* list of room aliases via the ``m.room.aliases`` state event. This alias list is partial because it cannot guarantee that the alias list is in any way accurate or up-to-date, as room aliases can point to different room IDs over time. Crucially, the aliases in this event are **purely informational** and SHOULD NOT be treated as accurate. They SHOULD be checked before they are used or shared with another user. If a room appears to have a room alias of ``#alias:example.com``, this SHOULD be checked to make sure that the room's ID matches the ``room_id`` returned from the request. Room aliases can be checked in the same way they are resolved; by sending a ``GET /directory/room/``:: { "room_id": , "servers": [ , , ] } Home servers can respond to resolve requests for aliases on other domains than their own by using the federation API to ask other domain name home servers. Permissions ~~~~~~~~~~~ .. NOTE:: This section is a work in progress. Permissions for rooms are done via the concept of power levels - to do any action in a room a user must have a suitable power level. Power levels are stored as state events in a given room. Power levels for users are defined in ``m.room.power_levels``, where both a default and specific users' power levels can be set:: { "": , "": , "default": 0 } By default all users have a power level of 0, other than the room creator whose power level defaults to 100. Users can grant other users increased power levels up to their own power level. For example, user A with a power level of 50 could increase the power level of user B to a maximum of level 50. Power levels for users are tracked per-room even if the user is not present in the room. State events may contain a ``required_power_level`` key, which indicates the minimum power a user must have before they can update that state key. The only exception to this is when a user leaves a room, which revokes the user's right to update state events in that room. To perform certain actions there are additional power level requirements defined in the following state events: - ``m.room.send_event_level`` defines the minimum ``level`` for sending non-state events. Defaults to 50. - ``m.room.add_state_level`` defines the minimum ``level`` for adding new state, rather than updating existing state. Defaults to 50. - ``m.room.ops_level`` defines the minimum ``ban_level`` and ``kick_level`` to ban and kick other users respectively. This defaults to a kick and ban levels of 50 each. Joining rooms ~~~~~~~~~~~~~ .. TODO-doc What does the home server have to do to join a user to a room? - See SPEC-30. Users need to join a room in order to send and receive events in that room. A user can join a room by making a request to |/join/|_ with:: {} Alternatively, a user can make a request to |/rooms//join|_ with the same request content. This is only provided for symmetry with the other membership APIs: ``/rooms//invite`` and ``/rooms//leave``. If a room alias was specified, it will be automatically resolved to a room ID, which will then be joined. The room ID that was joined will be returned in response:: { "room_id": "!roomid:domain" } The membership state for the joining user can also be modified directly to be ``join`` by sending the following request to ``/rooms//state/m.room.member/``:: { "membership": "join" } See the `Room events`_ section for more information on ``m.room.member``. After the user has joined a room, they will receive subsequent events in that room. This room will now appear as an entry in the |initialSync|_ API. Some rooms enforce that a user is *invited* to a room before they can join that room. Other rooms will allow anyone to join the room even if they have not received an invite. Inviting users ~~~~~~~~~~~~~~ .. TODO-doc Invite-join dance - Outline invite join dance. What is it? Why is it required? How does it work? - What does the home server have to do? The purpose of inviting users to a room is to notify them that the room exists so they can choose to become a member of that room. Some rooms require that all users who join a room are previously invited to it (an "invite-only" room). Whether a given room is an "invite-only" room is determined by the room config key ``m.room.join_rules``. It can have one of the following values: ``public`` This room is free for anyone to join without an invite. ``invite`` This room can only be joined if you were invited. Only users who have a membership state of ``join`` in a room can invite new users to said room. The person being invited must not be in the ``join`` state in the room. The fully-qualified user ID must be specified when inviting a user, as the user may reside on a different home server. To invite a user, send the following request to |/rooms//invite|_, which will manage the entire invitation process:: { "user_id": "" } Alternatively, the membership state for this user in this room can be modified directly by sending the following request to ``/rooms//state/m.room.member/``:: { "membership": "invite" } See the `Room events`_ section for more information on ``m.room.member``. Leaving rooms ~~~~~~~~~~~~~ .. TODO-spec - HS deleting rooms they are no longer a part of. Not implemented. - This is actually Very Tricky. If all clients a HS is serving leave a room, the HS will no longer get any new events for that room, because the servers who get the events are determined on the *membership list*. There should probably be a way for a HS to lurk on a room even if there are 0 of their members in the room. - Grace period before deletion? - Under what conditions should a room NOT be purged? A user can leave a room to stop receiving events for that room. A user must have joined the room before they are eligible to leave the room. If the room is an "invite-only" room, they will need to be re-invited before they can re-join the room. To leave a room, a request should be made to |/rooms//leave|_ with:: {} Alternatively, the membership state for this user in this room can be modified directly by sending the following request to ``/rooms//state/m.room.member/``:: { "membership": "leave" } See the `Room events`_ section for more information on ``m.room.member``. Once a user has left a room, that room will no longer appear on the |initialSync|_ API. If all members in a room leave, that room becomes eligible for deletion. Banning users in a room ~~~~~~~~~~~~~~~~~~~~~~~ A user may decide to ban another user in a room. 'Banning' forces the target user to leave the room and prevents them from re-joining the room. A banned user will not be treated as a joined user, and so will not be able to send or receive events in the room. In order to ban someone, the user performing the ban MUST have the required power level. To ban a user, a request should be made to |/rooms//ban|_ with:: { "user_id": "" } Banning a user adjusts the banned member's membership state to ``ban`` and adjusts the power level of this event to a level higher than the banned person. Like with other membership changes, a user can directly adjust the target member's state, by making a request to ``/rooms//state/m.room.member/``:: { "membership": "ban" } Events in a room ~~~~~~~~~~~~~~~~ Room events can be split into two categories: :State Events: These are events which replace events that came before it, depending on a set of unique keys. These keys are the event ``type`` and a ``state_key``. Events with the same set of keys will be overwritten. Typically, state events are used to store state, hence their name. :Non-state events: These are events which cannot be overwritten after sending. The list of events continues to grow as more events are sent. As this list grows, it becomes necessary to provide a mechanism for navigating this list. Pagination APIs are used to view the list of historical non-state events. Typically, non-state events are used to send messages. This specification outlines several events, all with the event type prefix ``m.``. However, applications may wish to add their own type of event, and this can be achieved using the REST API detailed in the following sections. If new events are added, the event ``type`` key SHOULD follow the Java package naming convention, e.g. ``com.example.myapp.event``. This ensures event types are suitably namespaced for each application and reduces the risk of clashes. State events ~~~~~~~~~~~~ State events can be sent by ``PUT`` ing to |/rooms//state//|_. These events will be overwritten if ````, ```` and ```` all match. If the state event has no ``state_key``, it can be omitted from the path. These requests **cannot use transaction IDs** like other ``PUT`` paths because they cannot be differentiated from the ``state_key``. Furthermore, ``POST`` is unsupported on state paths. Valid requests look like:: PUT /rooms/!roomid:domain/state/m.example.event { "key" : "without a state key" } PUT /rooms/!roomid:domain/state/m.another.example.event/foo { "key" : "with 'foo' as the state key" } In contrast, these requests are invalid:: POST /rooms/!roomid:domain/state/m.example.event/ { "key" : "cannot use POST here" } PUT /rooms/!roomid:domain/state/m.another.example.event/foo/11 { "key" : "txnIds are not supported" } Care should be taken to avoid setting the wrong ``state key``:: PUT /rooms/!roomid:domain/state/m.another.example.event/11 { "key" : "with '11' as the state key, but was probably intended to be a txnId" } The ``state_key`` is often used to store state about individual users, by using the user ID as the ``state_key`` value. For example:: PUT /rooms/!roomid:domain/state/m.favorite.animal.event/%40my_user%3Adomain.com { "animal" : "cat", "reason": "fluffy" } In some cases, there may be no need for a ``state_key``, so it can be omitted:: PUT /rooms/!roomid:domain/state/m.room.bgd.color { "color": "red", "hex": "#ff0000" } See `Room Events`_ for the ``m.`` event specification. Non-state events ~~~~~~~~~~~~~~~~ Non-state events can be sent by sending a request to |/rooms//send/|_. These requests *can* use transaction IDs and ``PUT``/``POST`` methods. Non-state events allow access to historical events and pagination, making it best suited for sending messages. For example:: POST /rooms/!roomid:domain/send/m.custom.example.message { "text": "Hello world!" } PUT /rooms/!roomid:domain/send/m.custom.example.message/11 { "text": "Goodbye world!" } See `Room Events`_ for the ``m.`` event specification. Syncing rooms ~~~~~~~~~~~~~ .. NOTE:: This section is a work in progress. When a client logs in, they may have a list of rooms which they have already joined. These rooms may also have a list of events associated with them. The purpose of 'syncing' is to present the current room and event information in a convenient, compact manner. The events returned are not limited to room events; presence events will also be returned. A single syncing API is provided: - |initialSync|_ : A global sync which will present room and event information for all rooms the user has joined. .. TODO-spec room-scoped initial sync - |/rooms//initialSync|_ : A sync scoped to a single room. Presents room and event information for this room only. - Room-scoped initial sync is Very Tricky because typically people would want to sync the room then listen for any new content from that point onwards. The event stream cannot do this for a single room currently. As a result, commenting room-scoped initial sync at this time. The |initialSync|_ API contains the following keys: ``presence`` Description: Contains a list of presence information for users the client is interested in. Format: A JSON array of ``m.presence`` events. ``end`` Description: Contains an event stream token which can be used with the `Event Stream`_. Format: A string containing the event stream token. ``rooms`` Description: Contains a list of room information for all rooms the client has joined, and limited room information on rooms the client has been invited to. Format: A JSON array containing Room Information JSON objects. Room Information: Description: Contains all state events for the room, along with a limited amount of the most recent non-state events, configured via the ``limit`` query parameter. Also contains additional keys with room metadata, such as the ``room_id`` and the client's ``membership`` to the room. Format: A JSON object with the following keys: ``room_id`` A string containing the ID of the room being described. ``membership`` A string representing the client's membership status in this room. ``messages`` An event stream JSON object containing a ``chunk`` of recent non-state events, along with an ``end`` token. *NB: The name of this key will be changed in a later version.* ``state`` A JSON array containing all the current state events for this room. Getting events for a room ~~~~~~~~~~~~~~~~~~~~~~~~~ There are several APIs provided to ``GET`` events for a room: ``/rooms//state//`` Description: Get the state event identified. Response format: A JSON object representing the state event **content**. Example: ``/rooms/!room:domain.com/state/m.room.name`` returns ``{ "name": "Room name" }`` |/rooms//state|_ Description: Get all state events for a room. Response format: ``[ { state event }, { state event }, ... ]`` Example: TODO-doc |/rooms//members|_ Description: Get all ``m.room.member`` state events. Response format: ``{ "start": "", "end": "", "chunk": [ { m.room.member event }, ... ] }`` Example: TODO-doc |/rooms//messages|_ Description: Get all ``m.room.message`` and ``m.room.member`` events. This API supports pagination using ``from`` and ``to`` query parameters, coupled with the ``start`` and ``end`` tokens from an |initialSync|_ API. Response format: ``{ "start": "", "end": "" }`` Example: TODO-doc |/rooms//initialSync|_ Description: Get all relevant events for a room. This includes state events, paginated non-state events and presence events. Response format: `` { TODO-doc } `` Example: TODO-doc Redactions ~~~~~~~~~~ Since events are extensible it is possible for malicious users and/or servers to add keys that are, for example offensive or illegal. Since some events cannot be simply deleted, e.g. membership events, we instead 'redact' events. This involves removing all keys from an event that are not required by the protocol. This stripped down event is thereafter returned anytime a client or remote server requests it. Events that have been redacted include a ``redacted_because`` key whose value is the event that caused it to be redacted, which may include a reason. Redacting an event cannot be undone, allowing server owners to delete the offending content from the databases. Currently, only room admins can redact events by sending a ``m.room.redaction`` event, but server admins also need to be able to redact events by a similar mechanism. Upon receipt of a redaction event, the server should strip off any keys not in the following list: - ``event_id`` - ``type`` - ``room_id`` - ``user_id`` - ``state_key`` - ``prev_state`` - ``content`` The content object should also be stripped of all keys, unless it is one of one of the following event types: - ``m.room.member`` allows key ``membership`` - ``m.room.create`` allows key ``creator`` - ``m.room.join_rules`` allows key ``join_rule`` - ``m.room.power_levels`` allows keys that are user ids or ``default`` - ``m.room.add_state_level`` allows key ``level`` - ``m.room.send_event_level`` allows key ``level`` - ``m.room.ops_levels`` allows keys ``kick_level``, ``ban_level`` and ``redact_level`` - ``m.room.aliases`` allows key ``aliases`` The redaction event should be added under the key ``redacted_because``. When a client receives a redaction event it should change the redacted event in the same way a server does. Presence ~~~~~~~~ The client API for presence is on the following set of REST calls. Fetching basic status:: GET $PREFIX/presence/:user_id/status Returned content: JSON object containing the following keys: presence: "offline"|"unavailable"|"online"|"free_for_chat" status_msg: (optional) string of freeform text last_active_ago: miliseconds since the last activity by the user Setting basic status:: PUT $PREFIX/presence/:user_id/status Content: JSON object containing the following keys: presence and status_msg: as above When setting the status, the activity time is updated to reflect that activity; the client does not need to specify the ``last_active_ago`` field. Fetching the presence list:: GET $PREFIX/presence/list Returned content: JSON array containing objects; each object containing the following keys: user_id: observed user ID presence: "offline"|"unavailable"|"online"|"free_for_chat" status_msg: (optional) string of freeform text last_active_ago: miliseconds since the last activity by the user Maintaining the presence list:: POST $PREFIX/presence/list Content: JSON object containing either or both of the following keys: invite: JSON array of strings giving user IDs to send invites to drop: JSON array of strings giving user IDs to remove from the list .. TODO-spec - Define how users receive presence invites, and how they accept/decline them Profiles ~~~~~~~~ The client API for profile management consists of the following REST calls. Fetching a user account displayname:: GET $PREFIX/profile/:user_id/displayname Returned content: JSON object containing the following keys: displayname: string of freeform text This call may be used to fetch the user's own displayname or to query the name of other users; either locally or on remote systems hosted on other home servers. Setting a new displayname:: PUT $PREFIX/profile/:user_id/displayname Content: JSON object containing the following keys: displayname: string of freeform text Fetching a user account avatar URL:: GET $PREFIX/profile/:user_id/avatar_url Returned content: JSON object containing the following keys: avatar_url: string containing an http-scheme URL As with displayname, this call may be used to fetch either the user's own, or other users' avatar URL. Setting a new avatar URL:: PUT $PREFIX/profile/:user_id/avatar_url Content: JSON object containing the following keys: avatar_url: string containing an http-scheme URL Fetching combined account profile information:: GET $PREFIX/profile/:user_id Returned content: JSON object containing the following keys: displayname: string of freeform text avatar_url: string containing an http-scheme URL At the current time, this API simply returns the displayname and avatar URL information, though it is intended to return more fields about the user's profile once they are defined. Client implementations should take care not to expect that these are the only two keys returned as future versions of this specification may yield more keys here. Security -------- Rate limiting ~~~~~~~~~~~~~ Home servers SHOULD implement rate limiting to reduce the risk of being overloaded. If a request is refused due to rate limiting, it should return a standard error response of the form:: { "errcode": "M_LIMIT_EXCEEDED", "error": "string", "retry_after_ms": integer (optional) } The ``retry_after_ms`` key SHOULD be included to tell the client how long they have to wait in milliseconds before they can try again. .. TODO-spec - Surely we should recommend an algorithm for the rate limiting, rather than letting every homeserver come up with their own idea, causing totally unpredictable performance over federated rooms? End-to-End Encryption ~~~~~~~~~~~~~~~~~~~~~ .. TODO-doc - Why is this needed. - Overview of process - Implementation Content repository ------------------ .. NOTE:: This section is a work in progress. .. TODO-spec - path to upload - format for thumbnail paths, mention what it is protecting against. - content size limit and associated M_ERROR. Address book repository ----------------------- .. NOTE:: This section is a work in progress. .. TODO-spec - format: POST(?) wodges of json, some possible processing, then return wodges of json on GET. - processing may remove dupes, merge contacts, pepper with extra info (e.g. matrix-ability of contacts), etc. - Standard json format for contacts? Piggy back off vcards? Federation API =============== Federation is the term used to describe how to communicate between Matrix home servers. Federation is a mechanism by which two home servers can exchange Matrix event messages, both as a real-time push of current events, and as a historic fetching mechanism to synchronise past history for clients to view. It uses HTTPS connections between each pair of servers involved as the underlying transport. Messages are exchanged between servers in real-time by active pushing from each server's HTTP client into the server of the other. Queries to fetch historic data for the purpose of back-filling scrollback buffers and the like can also be performed. Currently routing of messages between homeservers is full mesh (like email) - however, fan-out refinements to this design are currently under consideration. There are three main kinds of communication that occur between home servers: :Queries: These are single request/response interactions between a given pair of servers, initiated by one side sending an HTTPS GET request to obtain some information, and responded by the other. They are not persisted and contain no long-term significant history. They simply request a snapshot state at the instant the query is made. :Ephemeral Data Units (EDUs): These are notifications of events that are pushed from one home server to another. They are not persisted and contain no long-term significant history, nor does the receiving home server have to reply to them. :Persisted Data Units (PDUs): These are notifications of events that are broadcast from one home server to any others that are interested in the same "context" (namely, a Room ID). They are persisted to long-term storage and form the record of history for that context. EDUs and PDUs are further wrapped in an envelope called a Transaction, which is transferred from the origin to the destination home server using an HTTP PUT request. Transactions ------------ .. WARNING:: This section may be misleading or inaccurate. The transfer of EDUs and PDUs between home servers is performed by an exchange of Transaction messages, which are encoded as JSON objects, passed over an HTTP PUT request. A Transaction is meaningful only to the pair of home servers that exchanged it; they are not globally-meaningful. Each transaction has: - An opaque transaction ID. - A timestamp (UNIX epoch time in milliseconds) generated by its origin server. - An origin and destination server name. - A list of "previous IDs". - A list of PDUs and EDUs - the actual message payload that the Transaction carries. ``origin`` Type: String Description: DNS name of homeserver making this transaction. ``ts`` Type: Integer Description: Timestamp in milliseconds on originating homeserver when this transaction started. ``previous_ids`` Type: List of strings Description: List of transactions that were sent immediately prior to this transaction. ``pdus`` Type: List of Objects. Description: List of updates contained in this transaction. :: { "transaction_id":"916d630ea616342b42e98a3be0b74113", "ts":1404835423000, "origin":"red", "destination":"blue", "prev_ids":["e1da392e61898be4d2009b9fecce5325"], "pdus":[...], "edus":[...] } The ``prev_ids`` field contains a list of previous transaction IDs that the ``origin`` server has sent to this ``destination``. Its purpose is to act as a sequence checking mechanism - the destination server can check whether it has successfully received that Transaction, or ask for a retransmission if not. The ``pdus`` field of a transaction is a list, containing zero or more PDUs.[*] Each PDU is itself a JSON object containing a number of keys, the exact details of which will vary depending on the type of PDU. Similarly, the ``edus`` field is another list containing the EDUs. This key may be entirely absent if there are no EDUs to transfer. (* Normally the PDU list will be non-empty, but the server should cope with receiving an "empty" transaction.) PDUs and EDUs ------------- .. WARNING:: This section may be misleading or inaccurate. All PDUs have: - An ID - A context - A declaration of their type - A list of other PDU IDs that have been seen recently on that context (regardless of which origin sent them) ``context`` Type: String Description: Event context identifier ``origin`` Type: String Description: DNS name of homeserver that created this PDU. ``pdu_id`` Type: String Description: Unique identifier for PDU within the context for the originating homeserver ``ts`` Type: Integer Description: Timestamp in milliseconds on originating homeserver when this PDU was created. ``pdu_type`` Type: String Description: PDU event type. ``prev_pdus`` Type: List of pairs of strings Description: The originating homeserver and PDU ids of the most recent PDUs the homeserver was aware of for this context when it made this PDU. ``depth`` Type: Integer Description: The maximum depth of the previous PDUs plus one. .. TODO-spec paul - Update this structure so that 'pdu_id' is a two-element [origin,ref] pair like the prev_pdus are For state updates: ``is_state`` Type: Boolean Description: True if this PDU is updating state. ``state_key`` Type: String Description: Optional key identifying the updated state within the context. ``power_level`` Type: Integer Description: The asserted power level of the user performing the update. ``required_power_level`` Type: Integer Description: The required power level needed to replace this update. ``prev_state_id`` Type: String Description: PDU event type. ``prev_state_origin`` Type: String Description: The PDU id of the update this replaces. ``user_id`` Type: String Description: The user updating the state. :: { "pdu_id":"a4ecee13e2accdadf56c1025af232176", "context":"#example.green", "origin":"green", "ts":1404838188000, "pdu_type":"m.text", "prev_pdus":[["blue","99d16afbc857975916f1d73e49e52b65"]], "content":... "is_state":false } In contrast to Transactions, it is important to note that the ``prev_pdus`` field of a PDU refers to PDUs that any origin server has sent, rather than previous IDs that this ``origin`` has sent. This list may refer to other PDUs sent by the same origin as the current one, or other origins. Because of the distributed nature of participants in a Matrix conversation, it is impossible to establish a globally-consistent total ordering on the events. However, by annotating each outbound PDU at its origin with IDs of other PDUs it has received, a partial ordering can be constructed allowing causality relationships to be preserved. A client can then display these messages to the end-user in some order consistent with their content and ensure that no message that is semantically in reply of an earlier one is ever displayed before it. PDUs fall into two main categories: those that deliver Events, and those that synchronise State. For PDUs that relate to State synchronisation, additional keys exist to support this: :: {..., "is_state":true, "state_key":TODO-doc "power_level":TODO-doc "prev_state_id":TODO-doc "prev_state_origin":TODO-doc} EDUs, by comparison to PDUs, do not have an ID, a context, or a list of "previous" IDs. The only mandatory fields for these are the type, origin and destination home server names, and the actual nested content. :: {"edu_type":"m.presence", "origin":"blue", "destination":"orange", "content":...} Protocol URLs ------------- .. WARNING:: This section may be misleading or inaccurate. All these URLs are namespaced within a prefix of:: /_matrix/federation/v1/... For active pushing of messages representing live activity "as it happens":: PUT .../send/:transaction_id/ Body: JSON encoding of a single Transaction Response: TODO-doc The transaction_id path argument will override any ID given in the JSON body. The destination name will be set to that of the receiving server itself. Each embedded PDU in the transaction body will be processed. To fetch a particular PDU:: GET .../pdu/:origin/:pdu_id/ Response: JSON encoding of a single Transaction containing one PDU Retrieves a given PDU from the server. The response will contain a single new Transaction, inside which will be the requested PDU. To fetch all the state of a given context:: GET .../state/:context/ Response: JSON encoding of a single Transaction containing multiple PDUs Retrieves a snapshot of the entire current state of the given context. The response will contain a single Transaction, inside which will be a list of PDUs that encode the state. To backfill events on a given context:: GET .../backfill/:context/ Query args: v, limit Response: JSON encoding of a single Transaction containing multiple PDUs Retrieves a sliding-window history of previous PDUs that occurred on the given context. Starting from the PDU ID(s) given in the "v" argument, the PDUs that preceeded it are retrieved, up to a total number given by the "limit" argument. These are then returned in a new Transaction containing all of the PDUs. To stream events all the events:: GET .../pull/ Query args: origin, v Response: JSON encoding of a single Transaction consisting of multiple PDUs Retrieves all of the transactions later than any version given by the "v" arguments. To make a query:: GET .../query/:query_type Query args: as specified by the individual query types Response: JSON encoding of a response object Performs a single query request on the receiving home server. The Query Type part of the path specifies the kind of query being made, and its query arguments have a meaning specific to that kind of query. The response is a JSON-encoded object whose meaning also depends on the kind of query. Backfilling ----------- .. NOTE:: This section is a work in progress. .. TODO-doc - What it is, when is it used, how is it done SRV Records ----------- .. NOTE:: This section is a work in progress. .. TODO-doc - Why it is needed State Conflict Resolution ------------------------- .. NOTE:: This section is a work in progress. .. TODO-doc - How do conflicts arise (diagrams?) - How are they resolved (incl tie breaks) - How does this work with deleting current state Presence -------- The server API for presence is based entirely on exchange of the following EDUs. There are no PDUs or Federation Queries involved. Performing a presence update and poll subscription request:: EDU type: m.presence Content keys: push: (optional): list of push operations. Each should be an object with the following keys: user_id: string containing a User ID presence: "offline"|"unavailable"|"online"|"free_for_chat" status_msg: (optional) string of freeform text last_active_ago: miliseconds since the last activity by the user poll: (optional): list of strings giving User IDs unpoll: (optional): list of strings giving User IDs The presence of this combined message is two-fold: it informs the recipient server of the current status of one or more users on the sending server (by the ``push`` key), and it maintains the list of users on the recipient server that the sending server is interested in receiving updates for, by adding (by the ``poll`` key) or removing them (by the ``unpoll`` key). The ``poll`` and ``unpoll`` lists apply *changes* to the implied list of users; any existing IDs that the server sent as ``poll`` operations in a previous message are not removed until explicitly requested by a later ``unpoll``. On receipt of a message containing a non-empty ``poll`` list, the receiving server should immediately send the sending server a presence update EDU of its own, containing in a ``push`` list the current state of every user that was in the orginal EDU's ``poll`` list. Sending a presence invite:: EDU type: m.presence_invite Content keys: observed_user: string giving the User ID of the user whose presence is requested (i.e. the recipient of the invite) observer_user: string giving the User ID of the user who is requesting to observe the presence (i.e. the sender of the invite) Accepting a presence invite:: EDU type: m.presence_accept Content keys - as for m.presence_invite Rejecting a presence invite:: EDU type: m.presence_deny Content keys - as for m.presence_invite .. TODO-doc - Explain the timing-based roundtrip reduction mechanism for presence messages - Explain the zero-byte presence inference logic See also: docs/client-server/model/presence Profiles -------- The server API for profiles is based entirely on the following Federation Queries. There are no additional EDU or PDU types involved, other than the implicit ``m.presence`` and ``m.room.member`` events (see section below). Querying profile information:: Query type: profile Arguments: user_id: the ID of the user whose profile to return field: (optional) string giving a field name Returns: JSON object containing the following keys: displayname: string of freeform text avatar_url: string containing an http-scheme URL If the query contains the optional ``field`` key, it should give the name of a result field. If such is present, then the result should contain only a field of that name, with no others present. If not, the result should contain as much of the user's profile as the home server has available and can make public. Server-Server Authentication ---------------------------- .. TODO-doc - Why is this needed. - High level overview of process. - Transaction/PDU signing - How does this work with redactions? (eg hashing required keys only) Threat Model ------------ Denial of Service ~~~~~~~~~~~~~~~~~ The attacker could attempt to prevent delivery of messages to or from the victim in order to: * Disrupt service or marketing campaign of a commercial competitor. * Censor a discussion or censor a participant in a discussion. * Perform general vandalism. Threat: Resource Exhaustion +++++++++++++++++++++++++++ An attacker could cause the victims server to exhaust a particular resource (e.g. open TCP connections, CPU, memory, disk storage) Threat: Unrecoverable Consistency Violations ++++++++++++++++++++++++++++++++++++++++++++ An attacker could send messages which created an unrecoverable "split-brain" state in the cluster such that the victim's servers could no longer dervive a consistent view of the chatroom state. Threat: Bad History +++++++++++++++++++ An attacker could convince the victim to accept invalid messages which the victim would then include in their view of the chatroom history. Other servers in the chatroom would reject the invalid messages and potentially reject the victims messages as well since they depended on the invalid messages. .. TODO-spec Track trustworthiness of HS or users based on if they try to pretend they haven't seen recent events, and fake a splitbrain... --M Threat: Block Network Traffic +++++++++++++++++++++++++++++ An attacker could try to firewall traffic between the victim's server and some or all of the other servers in the chatroom. Threat: High Volume of Messages +++++++++++++++++++++++++++++++ An attacker could send large volumes of messages to a chatroom with the victim making the chatroom unusable. Threat: Banning users without necessary authorisation +++++++++++++++++++++++++++++++++++++++++++++++++++++ An attacker could attempt to ban a user from a chatroom with the necessary authorisation. Spoofing ~~~~~~~~ An attacker could try to send a message claiming to be from the victim without the victim having sent the message in order to: * Impersonate the victim while performing illict activity. * Obtain privileges of the victim. Threat: Altering Message Contents +++++++++++++++++++++++++++++++++ An attacker could try to alter the contents of an existing message from the victim. Threat: Fake Message "origin" Field +++++++++++++++++++++++++++++++++++ An attacker could try to send a new message purporting to be from the victim with a phony "origin" field. Spamming ~~~~~~~~ The attacker could try to send a high volume of solicicted or unsolicted messages to the victim in order to: * Find victims for scams. * Market unwanted products. Threat: Unsoliticted Messages +++++++++++++++++++++++++++++ An attacker could try to send messages to victims who do not wish to receive them. Threat: Abusive Messages ++++++++++++++++++++++++ An attacker could send abusive or threatening messages to the victim Spying ~~~~~~ The attacker could try to access message contents or metadata for messages sent by the victim or to the victim that were not intended to reach the attacker in order to: * Gain sensitive personal or commercial information. * Impersonate the victim using credentials contained in the messages. (e.g. password reset messages) * Discover who the victim was talking to and when. Threat: Disclosure during Transmission ++++++++++++++++++++++++++++++++++++++ An attacker could try to expose the message contents or metadata during transmission between the servers. Threat: Disclosure to Servers Outside Chatroom ++++++++++++++++++++++++++++++++++++++++++++++ An attacker could try to convince servers within a chatroom to send messages to a server it controls that was not authorised to be within the chatroom. Threat: Disclosure to Servers Within Chatroom ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ An attacker could take control of a server within a chatroom to expose message contents or metadata for messages in that room. Identity Servers ================ .. NOTE:: This section is a work in progress. .. TODO-doc Dave - 3PIDs and identity server, functions Lawful Interception ------------------- Key Escrow Servers ~~~~~~~~~~~~~~~~~~ Policy Servers ============== .. NOTE:: This section is a work in progress. .. TODO-spec We should mention them in the Architecture section at least: how they fit into the picture. Enforcing policies ------------------ .. Links through the external API docs are below .. ============================================= .. |createRoom| replace:: ``/createRoom`` .. _createRoom: /docs/api/client-server/#!/-rooms/create_room .. |initialSync| replace:: ``/initialSync`` .. _initialSync: /docs/api/client-server/#!/-events/initial_sync .. |/rooms//initialSync| replace:: ``/rooms//initialSync`` .. _/rooms//initialSync: /docs/api/client-server/#!/-rooms/get_room_sync_data .. |login| replace:: ``/login`` .. _login: /docs/api/client-server/#!/-login .. |register| replace:: ``/register`` .. _register: /docs/api/client-server/#!/-registration .. |/rooms//messages| replace:: ``/rooms//messages`` .. _/rooms//messages: /docs/api/client-server/#!/-rooms/get_messages .. |/rooms//members| replace:: ``/rooms//members`` .. _/rooms//members: /docs/api/client-server/#!/-rooms/get_members .. |/rooms//state| replace:: ``/rooms//state`` .. _/rooms//state: /docs/api/client-server/#!/-rooms/get_state_events .. |/rooms//send/| replace:: ``/rooms//send/`` .. _/rooms//send/: /docs/api/client-server/#!/-rooms/send_non_state_event .. |/rooms//state//| replace:: ``/rooms//state//`` .. _/rooms//state//: /docs/api/client-server/#!/-rooms/send_state_event .. |/rooms//invite| replace:: ``/rooms//invite`` .. _/rooms//invite: /docs/api/client-server/#!/-rooms/invite .. |/rooms//join| replace:: ``/rooms//join`` .. _/rooms//join: /docs/api/client-server/#!/-rooms/join_room .. |/rooms//leave| replace:: ``/rooms//leave`` .. _/rooms//leave: /docs/api/client-server/#!/-rooms/leave .. |/rooms//ban| replace:: ``/rooms//ban`` .. _/rooms//ban: /docs/api/client-server/#!/-rooms/ban .. |/join/| replace:: ``/join/`` .. _/join/: /docs/api/client-server/#!/-rooms/join .. _`Event Stream`: /docs/api/client-server/#!/-events/get_event_stream