From 20a67aa70da0e8ac49c724cdbc144004b03e5a74 Mon Sep 17 00:00:00 2001 From: Patrick Cloke Date: Wed, 21 Oct 2020 06:59:54 -0400 Subject: Separate the TCP and terse JSON formatting code. (#8587) This should (theoretically) allow for using the TCP code with a different output type and make it easier to use the JSON code with files / console. --- synapse/logging/_remote.py | 225 +++++++++++++++++++++++++++++++++++++++++ synapse/logging/_terse_json.py | 199 +++--------------------------------- 2 files changed, 238 insertions(+), 186 deletions(-) create mode 100644 synapse/logging/_remote.py (limited to 'synapse/logging') diff --git a/synapse/logging/_remote.py b/synapse/logging/_remote.py new file mode 100644 index 0000000000..0caf325916 --- /dev/null +++ b/synapse/logging/_remote.py @@ -0,0 +1,225 @@ +# -*- coding: utf-8 -*- +# Copyright 2020 The Matrix.org Foundation C.I.C. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +import sys +import traceback +from collections import deque +from ipaddress import IPv4Address, IPv6Address, ip_address +from math import floor +from typing import Callable, Optional + +import attr +from zope.interface import implementer + +from twisted.application.internet import ClientService +from twisted.internet.defer import Deferred +from twisted.internet.endpoints import ( + HostnameEndpoint, + TCP4ClientEndpoint, + TCP6ClientEndpoint, +) +from twisted.internet.interfaces import IPushProducer, ITransport +from twisted.internet.protocol import Factory, Protocol +from twisted.logger import ILogObserver, Logger, LogLevel + + +@attr.s +@implementer(IPushProducer) +class LogProducer: + """ + An IPushProducer that writes logs from its buffer to its transport when it + is resumed. + + Args: + buffer: Log buffer to read logs from. + transport: Transport to write to. + format_event: A callable to format the log entry to a string. + """ + + transport = attr.ib(type=ITransport) + format_event = attr.ib(type=Callable[[dict], str]) + _buffer = attr.ib(type=deque) + _paused = attr.ib(default=False, type=bool, init=False) + + def pauseProducing(self): + self._paused = True + + def stopProducing(self): + self._paused = True + self._buffer = deque() + + def resumeProducing(self): + self._paused = False + + while self._paused is False and (self._buffer and self.transport.connected): + try: + # Request the next event and format it. + event = self._buffer.popleft() + msg = self.format_event(event) + + # Send it as a new line over the transport. + self.transport.write(msg.encode("utf8")) + except Exception: + # Something has gone wrong writing to the transport -- log it + # and break out of the while. + traceback.print_exc(file=sys.__stderr__) + break + + +@attr.s +@implementer(ILogObserver) +class TCPLogObserver: + """ + An IObserver that writes JSON logs to a TCP target. + + Args: + hs (HomeServer): The homeserver that is being logged for. + host: The host of the logging target. + port: The logging target's port. + format_event: A callable to format the log entry to a string. + maximum_buffer: The maximum buffer size. + """ + + hs = attr.ib() + host = attr.ib(type=str) + port = attr.ib(type=int) + format_event = attr.ib(type=Callable[[dict], str]) + maximum_buffer = attr.ib(type=int) + _buffer = attr.ib(default=attr.Factory(deque), type=deque) + _connection_waiter = attr.ib(default=None, type=Optional[Deferred]) + _logger = attr.ib(default=attr.Factory(Logger)) + _producer = attr.ib(default=None, type=Optional[LogProducer]) + + def start(self) -> None: + + # Connect without DNS lookups if it's a direct IP. + try: + ip = ip_address(self.host) + if isinstance(ip, IPv4Address): + endpoint = TCP4ClientEndpoint( + self.hs.get_reactor(), self.host, self.port + ) + elif isinstance(ip, IPv6Address): + endpoint = TCP6ClientEndpoint( + self.hs.get_reactor(), self.host, self.port + ) + else: + raise ValueError("Unknown IP address provided: %s" % (self.host,)) + except ValueError: + endpoint = HostnameEndpoint(self.hs.get_reactor(), self.host, self.port) + + factory = Factory.forProtocol(Protocol) + self._service = ClientService(endpoint, factory, clock=self.hs.get_reactor()) + self._service.startService() + self._connect() + + def stop(self): + self._service.stopService() + + def _connect(self) -> None: + """ + Triggers an attempt to connect then write to the remote if not already writing. + """ + if self._connection_waiter: + return + + self._connection_waiter = self._service.whenConnected(failAfterFailures=1) + + @self._connection_waiter.addErrback + def fail(r): + r.printTraceback(file=sys.__stderr__) + self._connection_waiter = None + self._connect() + + @self._connection_waiter.addCallback + def writer(r): + # We have a connection. If we already have a producer, and its + # transport is the same, just trigger a resumeProducing. + if self._producer and r.transport is self._producer.transport: + self._producer.resumeProducing() + self._connection_waiter = None + return + + # If the producer is still producing, stop it. + if self._producer: + self._producer.stopProducing() + + # Make a new producer and start it. + self._producer = LogProducer( + buffer=self._buffer, + transport=r.transport, + format_event=self.format_event, + ) + r.transport.registerProducer(self._producer, True) + self._producer.resumeProducing() + self._connection_waiter = None + + def _handle_pressure(self) -> None: + """ + Handle backpressure by shedding events. + + The buffer will, in this order, until the buffer is below the maximum: + - Shed DEBUG events + - Shed INFO events + - Shed the middle 50% of the events. + """ + if len(self._buffer) <= self.maximum_buffer: + return + + # Strip out DEBUGs + self._buffer = deque( + filter(lambda event: event["log_level"] != LogLevel.debug, self._buffer) + ) + + if len(self._buffer) <= self.maximum_buffer: + return + + # Strip out INFOs + self._buffer = deque( + filter(lambda event: event["log_level"] != LogLevel.info, self._buffer) + ) + + if len(self._buffer) <= self.maximum_buffer: + return + + # Cut the middle entries out + buffer_split = floor(self.maximum_buffer / 2) + + old_buffer = self._buffer + self._buffer = deque() + + for i in range(buffer_split): + self._buffer.append(old_buffer.popleft()) + + end_buffer = [] + for i in range(buffer_split): + end_buffer.append(old_buffer.pop()) + + self._buffer.extend(reversed(end_buffer)) + + def __call__(self, event: dict) -> None: + self._buffer.append(event) + + # Handle backpressure, if it exists. + try: + self._handle_pressure() + except Exception: + # If handling backpressure fails,clear the buffer and log the + # exception. + self._buffer.clear() + self._logger.failure("Failed clearing backpressure") + + # Try and write immediately. + self._connect() diff --git a/synapse/logging/_terse_json.py b/synapse/logging/_terse_json.py index 1b8916cfa2..9b46956ca9 100644 --- a/synapse/logging/_terse_json.py +++ b/synapse/logging/_terse_json.py @@ -18,26 +18,11 @@ Log formatters that output terse JSON. """ import json -import sys -import traceback -from collections import deque -from ipaddress import IPv4Address, IPv6Address, ip_address -from math import floor -from typing import IO, Optional +from typing import IO -import attr -from zope.interface import implementer +from twisted.logger import FileLogObserver -from twisted.application.internet import ClientService -from twisted.internet.defer import Deferred -from twisted.internet.endpoints import ( - HostnameEndpoint, - TCP4ClientEndpoint, - TCP6ClientEndpoint, -) -from twisted.internet.interfaces import IPushProducer, ITransport -from twisted.internet.protocol import Factory, Protocol -from twisted.logger import FileLogObserver, ILogObserver, Logger +from synapse.logging._remote import TCPLogObserver _encoder = json.JSONEncoder(ensure_ascii=False, separators=(",", ":")) @@ -150,180 +135,22 @@ def TerseJSONToConsoleLogObserver(outFile: IO[str], metadata: dict) -> FileLogOb return FileLogObserver(outFile, formatEvent) -@attr.s -@implementer(IPushProducer) -class LogProducer: +def TerseJSONToTCPLogObserver( + hs, host: str, port: int, metadata: dict, maximum_buffer: int +) -> FileLogObserver: """ - An IPushProducer that writes logs from its buffer to its transport when it - is resumed. - - Args: - buffer: Log buffer to read logs from. - transport: Transport to write to. - """ - - transport = attr.ib(type=ITransport) - _buffer = attr.ib(type=deque) - _paused = attr.ib(default=False, type=bool, init=False) - - def pauseProducing(self): - self._paused = True - - def stopProducing(self): - self._paused = True - self._buffer = deque() - - def resumeProducing(self): - self._paused = False - - while self._paused is False and (self._buffer and self.transport.connected): - try: - event = self._buffer.popleft() - self.transport.write(_encoder.encode(event).encode("utf8")) - self.transport.write(b"\n") - except Exception: - # Something has gone wrong writing to the transport -- log it - # and break out of the while. - traceback.print_exc(file=sys.__stderr__) - break - - -@attr.s -@implementer(ILogObserver) -class TerseJSONToTCPLogObserver: - """ - An IObserver that writes JSON logs to a TCP target. + A log observer that formats events to a flattened JSON representation. Args: hs (HomeServer): The homeserver that is being logged for. host: The host of the logging target. port: The logging target's port. - metadata: Metadata to be added to each log entry. + metadata: Metadata to be added to each log object. + maximum_buffer: The maximum buffer size. """ - hs = attr.ib() - host = attr.ib(type=str) - port = attr.ib(type=int) - metadata = attr.ib(type=dict) - maximum_buffer = attr.ib(type=int) - _buffer = attr.ib(default=attr.Factory(deque), type=deque) - _connection_waiter = attr.ib(default=None, type=Optional[Deferred]) - _logger = attr.ib(default=attr.Factory(Logger)) - _producer = attr.ib(default=None, type=Optional[LogProducer]) - - def start(self) -> None: - - # Connect without DNS lookups if it's a direct IP. - try: - ip = ip_address(self.host) - if isinstance(ip, IPv4Address): - endpoint = TCP4ClientEndpoint( - self.hs.get_reactor(), self.host, self.port - ) - elif isinstance(ip, IPv6Address): - endpoint = TCP6ClientEndpoint( - self.hs.get_reactor(), self.host, self.port - ) - except ValueError: - endpoint = HostnameEndpoint(self.hs.get_reactor(), self.host, self.port) - - factory = Factory.forProtocol(Protocol) - self._service = ClientService(endpoint, factory, clock=self.hs.get_reactor()) - self._service.startService() - self._connect() - - def stop(self): - self._service.stopService() - - def _connect(self) -> None: - """ - Triggers an attempt to connect then write to the remote if not already writing. - """ - if self._connection_waiter: - return - - self._connection_waiter = self._service.whenConnected(failAfterFailures=1) - - @self._connection_waiter.addErrback - def fail(r): - r.printTraceback(file=sys.__stderr__) - self._connection_waiter = None - self._connect() - - @self._connection_waiter.addCallback - def writer(r): - # We have a connection. If we already have a producer, and its - # transport is the same, just trigger a resumeProducing. - if self._producer and r.transport is self._producer.transport: - self._producer.resumeProducing() - self._connection_waiter = None - return - - # If the producer is still producing, stop it. - if self._producer: - self._producer.stopProducing() - - # Make a new producer and start it. - self._producer = LogProducer(buffer=self._buffer, transport=r.transport) - r.transport.registerProducer(self._producer, True) - self._producer.resumeProducing() - self._connection_waiter = None - - def _handle_pressure(self) -> None: - """ - Handle backpressure by shedding events. - - The buffer will, in this order, until the buffer is below the maximum: - - Shed DEBUG events - - Shed INFO events - - Shed the middle 50% of the events. - """ - if len(self._buffer) <= self.maximum_buffer: - return - - # Strip out DEBUGs - self._buffer = deque( - filter(lambda event: event["level"] != "DEBUG", self._buffer) - ) - - if len(self._buffer) <= self.maximum_buffer: - return - - # Strip out INFOs - self._buffer = deque( - filter(lambda event: event["level"] != "INFO", self._buffer) - ) - - if len(self._buffer) <= self.maximum_buffer: - return - - # Cut the middle entries out - buffer_split = floor(self.maximum_buffer / 2) - - old_buffer = self._buffer - self._buffer = deque() - - for i in range(buffer_split): - self._buffer.append(old_buffer.popleft()) - - end_buffer = [] - for i in range(buffer_split): - end_buffer.append(old_buffer.pop()) - - self._buffer.extend(reversed(end_buffer)) - - def __call__(self, event: dict) -> None: - flattened = flatten_event(event, self.metadata, include_time=True) - self._buffer.append(flattened) - - # Handle backpressure, if it exists. - try: - self._handle_pressure() - except Exception: - # If handling backpressure fails,clear the buffer and log the - # exception. - self._buffer.clear() - self._logger.failure("Failed clearing backpressure") + def formatEvent(_event: dict) -> str: + flattened = flatten_event(_event, metadata, include_time=True) + return _encoder.encode(flattened) + "\n" - # Try and write immediately. - self._connect() + return TCPLogObserver(hs, host, port, formatEvent, maximum_buffer) -- cgit 1.4.1