| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
| |
If we've never made a request to a remote homeserver, we should cache the response---even if the response is "this user has no devices".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* `_auth_and_persist_outliers`: mark persisted events as outliers
Mark any events that get persisted via `_auth_and_persist_outliers` as, well,
outliers.
Currently this will be a no-op as everything will already be flagged as an
outlier, but I'm going to change that.
* `process_remote_join`: stop flagging as outlier
The events are now flagged as outliers later on, by `_auth_and_persist_outliers`.
* `send_join`: remove `outlier=True`
The events created here are returned in the result of `send_join` to
`FederationHandler.do_invite_join`. From there they are passed into
`FederationEventHandler.process_remote_join`, which passes them to
`_auth_and_persist_outliers`... which sets the `outlier` flag.
* `get_event_auth`: remove `outlier=True`
stop flagging the events returned by `get_event_auth` as outliers. This method
is only called by `_get_remote_auth_chain_for_event`, which passes the results
into `_auth_and_persist_outliers`, which will flag them as outliers.
* `_get_remote_auth_chain_for_event`: remove `outlier=True`
we pass all the events into `_auth_and_persist_outliers`, which will now flag
the events as outliers.
* `_check_sigs_and_hash_and_fetch`: remove unused `outlier` parameter
This param is now never set to True, so we can remove it.
* `_check_sigs_and_hash_and_fetch_one`: remove unused `outlier` param
This is no longer set anywhere, so we can remove it.
* `get_pdu`: remove unused `outlier` parameter
... and chase it down into `get_pdu_from_destination_raw`.
* `event_from_pdu_json`: remove redundant `outlier` param
This is never set to `True`, so can be removed.
* changelog
* update docstring
|
|
|
|
|
| |
The event still needs to have `auth_events` defined to be valid.
Split out from https://github.com/matrix-org/synapse/pull/11114
|
| |
|
|
|
| |
As a step towards allowing back-channel logout for OIDC.
|
|
|
|
|
|
| |
This also makes additional updates where the implementation
had drifted from the approved MSC.
Unstable endpoints will be removed at a later data.
|
|
|
|
|
|
|
|
| |
If `room_list_publication_rules` was configured with a rule with a
non-wildcard alias and a room was created with an alias then an
internal server error would have been thrown.
This fixes the error and properly applies the publication rules
during room creation.
|
| |
|
|
|
|
| |
`create_access_token_for_user_id` (#11369)
|
|
|
|
|
| |
Different users may be allowed to see different rooms within a space,
so sharing responses between users is inadvisable.
|
| |
|
|
|
|
|
|
|
|
|
| |
* Add support for the stable version of MSC2778
Signed-off-by: Tulir Asokan <tulir@maunium.net>
* Expect m.login.application_service in login and password provider tests
Signed-off-by: Tulir Asokan <tulir@maunium.net>
|
|
|
| |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
|
|
|
| |
Adds experimental support for `relation_types` and `relation_senders`
fields for filters.
|
|
|
|
|
|
|
| |
time (#11234)
When fetching remote devices for the first time, we did not correctly include the cross signing keys in the returned results.
c.f. #11159
|
|
|
|
|
| |
(#11207)
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
|
|
| |
Signed-off-by: Rafael Goncalves <rafaelgoncalves@riseup.net>
|
|
|
| |
Fixes: #9346
|
|
|
|
|
|
| |
Fixes: #10929
Signed-off-by: Andrew Ferrazzutti <fair@miscworks.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
room (#11143)
* We only need to fetch users in private rooms
* Filter out `user_id` at the top
* Discard excluded users in the top loop
We weren't doing this in the "First, if they're our user" branch so this
is a bugfix.
* The caller must check that `user_id` is included
This is in the docstring. There are two call sites:
- one in `_handle_room_publicity_change`, which explicitly checks before calling;
- and another in `_handle_room_membership_event`, which returns early if
the user is excluded.
So this change is safe.
* Test joining a private room with an excluded user
* Tweak an existing test
* Changelog
* test docstring
* lint
|
| |
|
|
|
| |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
extremities (#11027)
Found while working on the Gitter backfill script and noticed
it only happened after we sent 7 batches, https://gitlab.com/gitterHQ/webapp/-/merge_requests/2229#note_665906390
When there are more than 5 backward extremities for a given depth,
backfill will throw an error because we sliced the extremity list
to 5 but then try to iterate over the full list. This causes
us to look for state that we never fetched and we get a `KeyError`.
Before when calling `/messages` when there are more than 5 backward extremities:
```
Traceback (most recent call last):
File "/usr/local/lib/python3.8/site-packages/synapse/http/server.py", line 258, in _async_render_wrapper
callback_return = await self._async_render(request)
File "/usr/local/lib/python3.8/site-packages/synapse/http/server.py", line 446, in _async_render
callback_return = await raw_callback_return
File "/usr/local/lib/python3.8/site-packages/synapse/rest/client/room.py", line 580, in on_GET
msgs = await self.pagination_handler.get_messages(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/pagination.py", line 396, in get_messages
await self.hs.get_federation_handler().maybe_backfill(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 133, in maybe_backfill
return await self._maybe_backfill_inner(room_id, current_depth, limit)
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 386, in _maybe_backfill_inner
likely_extremeties_domains = get_domains_from_state(states[e_id])
KeyError: '$zpFflMEBtZdgcMQWTakaVItTLMjLFdKcRWUPHbbSZJl'
```
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
table. (#11053)
The following scenarios would halt the user directory updater:
- user joins room
- user leaves room
- user present in room which switches from private to public, or vice versa.
for two classes of users:
- appservice senders
- users missing from the user table.
If this happened, the user directory would be stuck, unable to make forward progress.
Exclude both cases from the user directory, so that we ignore them.
Co-authored-by: Eric Eastwood <erice@element.io>
Co-authored-by: reivilibre <oliverw@matrix.org>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
|
|/
|
|
|
|
| |
interface (#10548)
Co-authored-by: Azrenbeth <7782548+Azrenbeth@users.noreply.github.com>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
|
|
|
| |
This splits apart `handle_new_user` into a function which adds an entry to the `user_directory` and a function which updates the room sharing tables. I plan to continue doing more of this kind of refactoring to clarify the implementation.
|
|
|
|
|
| |
nickname (#11002)
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
|
|
|
|
|
|
|
|
| |
Fix a long-standing bug where a batch of user directory changes would be
silently dropped if the server left a room early in the batch.
* Pull out `wait_for_background_update` in tests
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Introduce `should_include_local_users_in_dir`
We exclude three kinds of local users from the user_directory tables. At
present we don't consistently exclude all three in the same places. This
commit introduces a new function to gather those exclusion conditions
together. Because we have to handle local and remote users in different
ways, I've made that function only consider the case of remote users.
It's the caller's responsibility to make the local versus remote
distinction clear and correct.
A test fixup is required. The test now hits a path which makes db
queries against the users table. The expected rows were missing, because
we were using a dummy user that hadn't actually been registered.
We also add new test cases to covert the exclusion logic.
----
By my reading this makes these changes:
* When an app service user registers or changes their profile, they will
_not_ be added to the user directory. (Previously only support and
deactivated users were excluded). This is consistent with the logic that
rebuilds the user directory. See also [the discussion
here](https://github.com/matrix-org/synapse/pull/10914#discussion_r716859548).
* When rebuilding the directory, exclude support and disabled users from
room sharing tables. Previously only appservice users were excluded.
* Exclude all three categories of local users when rebuilding the
directory. Previously `_populate_user_directory_process_users` didn't do
any exclusion.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |
|
|
|
|
| |
Uses `override_config` and fixes test_auto_create_auto_join_where_no_consent
to properly configure auto-join rooms.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Pull out GetUserDirectoryTables helper
* Don't rebuild the dir in tests that don't need it
In #10796 I changed registering a user to add directory entries under.
This means we don't have to force a directory regbuild in to tests of
the user directory search.
* Move test_initial to tests/storage
* Add type hints to both test_user_directory files
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Factor more stuff out of `_get_events_and_persist`
It turns out that the event-sorting algorithm in `_get_events_and_persist` is
also useful in other circumstances. Here we move the current
`_auth_and_persist_fetched_events` to `_auth_and_persist_fetched_events_inner`,
and then factor the sorting part out to `_auth_and_persist_fetched_events`.
* `_get_remote_auth_chain_for_event`: remove redundant `outlier` assignment
`get_event_auth` returns events with the outlier flag already set, so this is
redundant (though we need to update a test where `get_event_auth` is mocked).
* `_get_remote_auth_chain_for_event`: move existing-event tests earlier
Move a couple of tests outside the loop. This is a bit inefficient for now, but
a future commit will make it better. It should be functionally identical.
* `_get_remote_auth_chain_for_event`: use `_auth_and_persist_fetched_events`
We can use the same codepath for persisting the events fetched as part of an
auth chain as for those fetched individually by `_get_events_and_persist` for
building the state at a backwards extremity.
* `_get_remote_auth_chain_for_event`: use a dict for efficiency
`_auth_and_persist_fetched_events` sorts the events itself, so we no longer
need to care about maintaining the ordering from `get_event_auth` (and no
longer need to sort by depth in `get_event_auth`).
That means that we can use a map, making it easier to filter out events we
already have, etc.
* changelog
* `_auth_and_persist_fetched_events`: improve docstring
|
|
|
|
|
|
|
|
|
|
|
| |
* Improve typing in user_directory files
This makes the user_directory.py in storage pass most of mypy's
checks (including `no-untyped-defs`). Unfortunately that file is in the
tangled web of Store class inheritance so doesn't pass mypy at the moment.
The handlers directory has already been mypyed.
Co-authored-by: reivilibre <olivier@librepush.net>
|
| |
|
|
|
|
|
| |
Co-authored-by: Dirk Klimpel <5740567+dklimpel@users.noreply.github.com>
Co-authored-by: reivilibre <olivier@librepush.net>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's a simplification, but one that'll help make the user directory logic easier
to follow with the other changes upcoming. It's not strictly required for those
changes, but this will help simplify the resulting logic that listens for
`m.room.member` events and generally make the logic easier to follow.
This means the config option `search_all_users` ends up controlling the
search query only, and not the data we store. The cost of doing so is an
extra row in the `user_directory` and `user_directory_search` tables for
each local user which
- belongs to no public rooms
- belongs to no private rooms of size ≥ 2
I think the cost of this will be marginal (since they'll already have entries
in `users` and `profiles` anyway).
As a small upside, a homeserver whose directory was built with this
change can toggle `search_all_users` without having to rebuild their
directory.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
|
|
| |
No functional changes here. This came out as I was working to tackle #5677
|
| |
|
|
|
|
| |
This avoids breaking the entire endpoint if a room with
an unsupported room version is encountered.
|
|
|
|
|
|
|
|
|
| |
rooms. (#10730)
This updates the ordering of the returned events from the spaces
summary API to that defined in MSC2946 (which updates MSC1772).
Previously a step was skipped causing ordering to be inconsistent with
clients.
|
|\ |
|
| |
| |
| |
| |
| |
| |
| | |
Turns out that the functionality added in #10546 to skip TLS was incompatible
with older Twisted versions, so we need to be a bit more inventive.
Also, add a test to (hopefully) not break this in future. Sadly, testing TLS is
really hard.
|
| |
| |
| | |
The idea here is to take anything to do with incoming events and move it out to a separate handler, as a way of making FederationHandler smaller.
|
|/
|
|
| |
A user will still see this room if it is in a local cache, but it will
not reappear if clearing the cache and reloading.
|
| |
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Handle string read receipt data
Signed-off-by: Šimon Brandner <simon.bra.ag@gmail.com>
* Test that we handle string read receipt data
Signed-off-by: Šimon Brandner <simon.bra.ag@gmail.com>
* Add changelog for #10606
Signed-off-by: Šimon Brandner <simon.bra.ag@gmail.com>
* Add docs
Signed-off-by: Šimon Brandner <simon.bra.ag@gmail.com>
* Ignore malformed RRs
Signed-off-by: Šimon Brandner <simon.bra.ag@gmail.com>
* Only surround hidden = ...
Signed-off-by: Šimon Brandner <simon.bra.ag@gmail.com>
* Remove unnecessary argument
Signed-off-by: Šimon Brandner <simon.bra.ag@gmail.com>
* Update changelog.d/10606.bugfix
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
| |
As opposed to only allowing the summary of spaces which the user is
already in or has world-readable visibility.
This makes the logic consistent with whether a space/room is returned
as part of a space and whether a space summary can start at a space.
|
|
|
| |
And ensure that the file is checked via mypy.
|
|
|
|
|
| |
This adds support for the /hierarchy endpoint, which is an
update to MSC2946. Currently this only supports rooms known
locally to the homeserver.
|
|
|
|
|
|
|
| |
(#10560)
If a room which the requesting user was invited to was queried over
federation it will now properly appear in the spaces summary (instead
of being stripped out by the requesting server).
|
|
|
| |
Signed-off-by: Dirk Klimpel dirk@klimpel.org
|
|\ |
|
| |
| |
| | |
This adds support for MSC3289: room version 8. This is room version 7 + MSC3083.
|
| |
| |
| |
| |
| | |
This should have no user-visible changes, but refactors some pieces of
the SpaceSummaryHandler before adding support for the updated
MSC2946.
|
|/
|
|
|
|
| |
If there are no services providing a protocol, omit it completely
instead of returning an empty dictionary.
This fixes a long-standing spec compliance bug.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reproducible on a federated homeserver when there is a membership auth event as a floating outlier. Then when we try to backfill one of that persons messages, it has missing membership auth to fetch which caused us to mistakenly replace the `context` for the message with that of the floating membership `outlier` event. Since `outliers` have no `state` or `state_group`, the error bubbles up when we continue down the persisting route: `sqlite3.IntegrityError: NOT NULL constraint failed: event_to_state_groups.state_group`
Call stack:
```
backfill
_auth_and_persist_event
_check_event_auth
_update_auth_events_and_context_for_auth
```
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.39.0rc3 (2021-07-28)
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse 1.38 which caused an exception at startup when SAML authentication was enabled. ([\#10477](https://github.com/matrix-org/synapse/issues/10477))
- Fix a long-standing bug where Synapse would not inform clients that a device had exhausted its one-time-key pool, potentially causing problems decrypting events. ([\#10485](https://github.com/matrix-org/synapse/issues/10485))
- Fix reporting old R30 stats as R30v2 stats. Introduced in v1.39.0rc1. ([\#10486](https://github.com/matrix-org/synapse/issues/10486))
Internal Changes
----------------
- Fix an error which prevented the Github Actions workflow to build the docker images from running. ([\#10461](https://github.com/matrix-org/synapse/issues/10461))
- Fix release script to correctly version debian changelog when doing RCs. ([\#10465](https://github.com/matrix-org/synapse/issues/10465))
|
| |
| |
| | |
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
|/
|
| |
Implementation of matrix-org/matrix-doc#2285
|
|
|
|
|
|
|
|
|
|
| |
Previously only world-readable rooms were shown. This means that
rooms which are public, knockable, or invite-only with a pending invitation,
are included in a space summary. It also applies the same logic to
the experimental room version from MSC3083 -- if a user has access
to the proper allowed rooms then it is shown in the spaces summary.
This change is made per MSC3173 allowing stripped state of a room to
be shown to any potential room joiner.
|
| |
|
| |
|
|
|
| |
Fixes #9602
|
| |
|
|
|
| |
Instead of mixing them with user authentication methods.
|
|
|
|
|
| |
Previously m.child.room events in non-space rooms would be
treated as part of the room graph, but this is no longer
supported.
|
|
|
| |
The idea here is to stop people sending things that aren't joins/leaves/knocks through these endpoints: previously you could send anything you liked through them. I wasn't able to find any security holes from doing so, but it doesn't sound like a good thing.
|
|
|
|
|
|
|
|
|
|
| |
This implements refresh tokens, as defined by MSC2918
This MSC has been implemented client side in Hydrogen Web: vector-im/hydrogen-web#235
The basics of the MSC works: requesting refresh tokens on login, having the access tokens expire, and using the refresh token to get a new one.
Signed-off-by: Quentin Gliech <quentingliech@gmail.com>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.37.0rc1 (2021-06-24)
==============================
This release deprecates the current spam checker interface. See the [upgrade notes](https://matrix-org.github.io/synapse/develop/upgrade#deprecation-of-the-current-spam-checker-interface) for more information on how to update to the new generic module interface.
This release also removes support for fetching and renewing TLS certificates using the ACME v1 protocol, which has been fully decommissioned by Let's Encrypt on June 1st 2021. Admins previously using this feature should use a [reverse proxy](https://matrix-org.github.io/synapse/develop/reverse_proxy.html) to handle TLS termination, or use an external ACME client (such as [certbot](https://certbot.eff.org/)) to retrieve a certificate and key and provide them to Synapse using the `tls_certificate_path` and `tls_private_key_path` configuration settings.
Features
--------
- Implement "room knocking" as per [MSC2403](https://github.com/matrix-org/matrix-doc/pull/2403). Contributed by @Sorunome and anoa. ([\#6739](https://github.com/matrix-org/synapse/issues/6739), [\#9359](https://github.com/matrix-org/synapse/issues/9359), [\#10167](https://github.com/matrix-org/synapse/issues/10167), [\#10212](https://github.com/matrix-org/synapse/issues/10212), [\#10227](https://github.com/matrix-org/synapse/issues/10227))
- Add experimental support for backfilling history into rooms ([MSC2716](https://github.com/matrix-org/matrix-doc/pull/2716)). ([\#9247](https://github.com/matrix-org/synapse/issues/9247))
- Implement a generic interface for third-party plugin modules. ([\#10062](https://github.com/matrix-org/synapse/issues/10062), [\#10206](https://github.com/matrix-org/synapse/issues/10206))
- Implement config option `sso.update_profile_information` to sync SSO users' profile information with the identity provider each time they login. Currently only displayname is supported. ([\#10108](https://github.com/matrix-org/synapse/issues/10108))
- Ensure that errors during startup are written to the logs and the console. ([\#10191](https://github.com/matrix-org/synapse/issues/10191))
Bugfixes
--------
- Fix a bug introduced in Synapse v1.25.0 that prevented the `ip_range_whitelist` configuration option from working for federation and identity servers. Contributed by @mikure. ([\#10115](https://github.com/matrix-org/synapse/issues/10115))
- Remove a broken import line in Synapse's `admin_cmd` worker. Broke in Synapse v1.33.0. ([\#10154](https://github.com/matrix-org/synapse/issues/10154))
- Fix a bug introduced in Synapse v1.21.0 which could cause `/sync` to return immediately with an empty response. ([\#10157](https://github.com/matrix-org/synapse/issues/10157), [\#10158](https://github.com/matrix-org/synapse/issues/10158))
- Fix a minor bug in the response to `/_matrix/client/r0/user/{user}/openid/request_token` causing `expires_in` to be a float instead of an integer. Contributed by @lukaslihotzki. ([\#10175](https://github.com/matrix-org/synapse/issues/10175))
- Always require users to re-authenticate for dangerous operations: deactivating an account, modifying an account password, and adding 3PIDs. ([\#10184](https://github.com/matrix-org/synapse/issues/10184))
- Fix a bug introduced in Synpase v1.7.2 where remote server count metrics collection would be incorrectly delayed on startup. Found by @heftig. ([\#10195](https://github.com/matrix-org/synapse/issues/10195))
- Fix a bug introduced in Synapse v1.35.1 where an `allow` key of a `m.room.join_rules` event could be applied for incorrect room versions and configurations. ([\#10208](https://github.com/matrix-org/synapse/issues/10208))
- Fix performance regression in responding to user key requests over federation. Introduced in Synapse v1.34.0rc1. ([\#10221](https://github.com/matrix-org/synapse/issues/10221))
Improved Documentation
----------------------
- Add a new guide to decoding request logs. ([\#8436](https://github.com/matrix-org/synapse/issues/8436))
- Mention in the sample homeserver config that you may need to configure max upload size in your reverse proxy. Contributed by @aaronraimist. ([\#10122](https://github.com/matrix-org/synapse/issues/10122))
- Fix broken links in documentation. ([\#10180](https://github.com/matrix-org/synapse/issues/10180))
- Deploy a snapshot of the documentation website upon each new Synapse release. ([\#10198](https://github.com/matrix-org/synapse/issues/10198))
Deprecations and Removals
-------------------------
- The current spam checker interface is deprecated in favour of a new generic modules system. See the [upgrade notes](https://matrix-org.github.io/synapse/develop/upgrade#deprecation-of-the-current-spam-checker-interface) for more information on how to update to the new system. ([\#10062](https://github.com/matrix-org/synapse/issues/10062), [\#10210](https://github.com/matrix-org/synapse/issues/10210), [\#10238](https://github.com/matrix-org/synapse/issues/10238))
- Stop supporting the unstable spaces prefixes from MSC1772. ([\#10161](https://github.com/matrix-org/synapse/issues/10161))
- Remove Synapse's support for automatically fetching and renewing certificates using the ACME v1 protocol. This protocol has been fully turned off by Let's Encrypt for existing installations on June 1st 2021. Admins previously using this feature should use a [reverse proxy](https://matrix-org.github.io/synapse/develop/reverse_proxy.html) to handle TLS termination, or use an external ACME client (such as [certbot](https://certbot.eff.org/)) to retrieve a certificate and key and provide them to Synapse using the `tls_certificate_path` and `tls_private_key_path` configuration settings. ([\#10194](https://github.com/matrix-org/synapse/issues/10194))
Internal Changes
----------------
- Update the database schema versioning to support gradual migration away from legacy tables. ([\#9933](https://github.com/matrix-org/synapse/issues/9933))
- Add type hints to the federation servlets. ([\#10080](https://github.com/matrix-org/synapse/issues/10080))
- Improve OpenTracing for event persistence. ([\#10134](https://github.com/matrix-org/synapse/issues/10134), [\#10193](https://github.com/matrix-org/synapse/issues/10193))
- Clean up the interface for injecting OpenTracing over HTTP. ([\#10143](https://github.com/matrix-org/synapse/issues/10143))
- Limit the number of in-flight `/keys/query` requests from a single device. ([\#10144](https://github.com/matrix-org/synapse/issues/10144))
- Refactor EventPersistenceQueue. ([\#10145](https://github.com/matrix-org/synapse/issues/10145))
- Document `SYNAPSE_TEST_LOG_LEVEL` to see the logger output when running tests. ([\#10148](https://github.com/matrix-org/synapse/issues/10148))
- Update the Complement build tags in GitHub Actions to test currently experimental features. ([\#10155](https://github.com/matrix-org/synapse/issues/10155))
- Add a `synapse_federation_soft_failed_events_total` metric to track how often events are soft failed. ([\#10156](https://github.com/matrix-org/synapse/issues/10156))
- Fetch the corresponding complement branch when performing CI. ([\#10160](https://github.com/matrix-org/synapse/issues/10160))
- Add some developer documentation about boolean columns in database schemas. ([\#10164](https://github.com/matrix-org/synapse/issues/10164))
- Add extra logging fields to better debug where events are being soft failed. ([\#10168](https://github.com/matrix-org/synapse/issues/10168))
- Add debug logging for when we enter and exit `Measure` blocks. ([\#10183](https://github.com/matrix-org/synapse/issues/10183))
- Improve comments in structured logging code. ([\#10188](https://github.com/matrix-org/synapse/issues/10188))
- Update [MSC3083](https://github.com/matrix-org/matrix-doc/pull/3083) support with modifications from the MSC. ([\#10189](https://github.com/matrix-org/synapse/issues/10189))
- Remove redundant DNS lookup limiter. ([\#10190](https://github.com/matrix-org/synapse/issues/10190))
- Upgrade `black` linting tool to 21.6b0. ([\#10197](https://github.com/matrix-org/synapse/issues/10197))
- Expose OpenTracing trace id in response headers. ([\#10199](https://github.com/matrix-org/synapse/issues/10199))
|
| |
| |
| | |
Fixes #10234
|
|/
|
|
|
|
| |
If a room is remote and we don't have a user in it, always try to join it. It might fail if the room is invite-only, but we don't have a user to invite with, so at this point it's the best we can do.
Fixes #10233 (at least to some extent)
|
|
|
| |
Work on https://github.com/matrix-org/matrix-doc/pull/2716
|
|
|
|
|
|
|
| |
This could cause a minor data leak if someone defined a non-restricted join rule
with an allow key or used a restricted join rule in an older room version, but this is
unlikely.
Additionally this starts adding unit tests to the spaces summary handler.
|
|
|
| |
This PR adds a common configuration section for all modules (see docs). These modules are then loaded at startup by the homeserver. Modules register their hooks and web resources using the new `register_[...]_callbacks` and `register_web_resource` methods of the module API.
|
|
|
|
|
| |
Reformat all files with the new version.
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
|
|
|
|
| |
(#10144)
|
|
|
|
|
|
|
|
|
|
| |
Fixes #1834.
`get_new_events_for_appservice` internally calls `get_events_as_list`, which will filter out any rejected events. If all returned events are filtered out, `_notify_interested_services` will return without updating the last handled stream position. If there are 100 consecutive such events, processing will halt altogether.
Breaking the loop is now done by checking whether we're up-to-date with `current_max` in the loop condition, instead of relying on an empty `events` list.
Signed-off-by: Willem Mulder <14mRh4X0r@gmail.com>
|
| |
|
|
|
|
|
|
|
| |
https://github.com/matrix-org/synapse/issues/9962 uncovered that we accidentally removed all but one of the presence updates that we store in the database when persisting multiple updates. This could cause users' presence state to be stale.
The bug was fixed in #10014, and this PR just adds a test that failed on the old code, and was used to initially verify the bug.
The test attempts to insert some presence into the database in a batch using `PresenceStore.update_presence`, and then simply pulls it out again.
|
| |
|
|
|
|
|
|
|
|
|
| |
This should help ensure that equivalent results are achieved between
homeservers querying for the summary of a space.
This implements modified MSC1772 rules, according to MSC2946.
The different is that the origin_server_ts of the m.room.create event
is not used as a tie-breaker since this might not be known if the
homeserver is not part of the room.
|
| |
|
|
|
|
|
| |
Only affects workers. Introduced in #9819.
Fixes #9899.
|
| |
|
| |
|
| |
|
|
|
|
|
|
|
| |
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
|
| |
|
|
|
|
| |
Allows limiting who can login using OIDC via the claims
made from the IdP.
|
|
|
|
|
|
|
| |
Fixes https://github.com/matrix-org/synapse/issues/9572
When a SSO user logs in for the first time, we create a local Matrix user for them. This goes through the register_user flow, which ends up triggering the spam checker. Spam checker modules don't currently have any way to differentiate between a user trying to sign up initially, versus an SSO user (whom has presumably already been approved elsewhere) trying to log in for the first time.
This PR passes `auth_provider_id` as an argument to the `check_registration_for_spam` function. This argument will contain an ID of an SSO provider (`"saml"`, `"cas"`, etc.) if one was used, else `None`.
|
|
|
|
|
| |
Apple had to be special. They want a client secret which is generated from an EC key.
Fixes #9220. Also fixes #9212 while I'm here.
|
|
|
| |
This great big stack of commits is a a whole load of hoop-jumping to make it easier to store additional values in login tokens, and then to actually store the SSO Identity Provider in the login token. (Making use of that data will follow in a subsequent PR.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(#9402)
This PR attempts to eliminate unnecessary presence sending work when your local server joins a room, or when a remote server joins a room your server is participating in by processing state deltas in chunks rather than individually.
---
When your server joins a room for the first time, it requests the historical state as well. This chunk of new state is passed to the presence handler which, after filtering that state down to only membership joins, will send presence updates to homeservers for each join processed.
It turns out that we were being a bit naive and processing each event individually, and sending out presence updates for every one of those joins. Even if many different joins were users on the same server (hello IRC bridges), we'd send presence to that same homeserver for every remote user join we saw.
This PR attempts to deduplicate all of that by processing the entire batch of state deltas at once, instead of only doing each join individually. We process the joins and note down which servers need which presence:
* If it was a local user join, send that user's latest presence to all servers in the room
* If it was a remote user join, send the presence for all local users in the room to that homeserver
We deduplicate by inserting all of those pending updates into a dictionary of the form:
```
{
server_name1: {presence_update1, ...},
server_name2: {presence_update1, presence_update2, ...}
}
```
Only after building this dict do we then start sending out presence updates.
|
|
|
|
|
|
|
|
|
| |
results (#9383)
This PR adds a homeserver config option, `user_directory.prefer_local_users`, that when enabled will show local users higher in user directory search results than remote users. This option is off by default.
Note that turning this on doesn't necessarily mean that remote users will always be put below local users, but they should be assuming all other ranking factors (search query match, profile information present etc) are identical.
This is useful for, say, University networks that are openly federating, but want to prioritise local students and staff in the user directory over other random users.
|
|
|
|
|
|
|
| |
Add off-by-default configuration settings to:
- disable putting an invitee's profile info in invite events
- disable profile lookup via federation
Signed-off-by: Andrew Ferrazzutti <fair@miscworks.net>
|
|
|
| |
Apple want to POST the OIDC auth response back to us rather than using query-params; add the necessary support to make that work.
|
|
|
|
|
|
|
| |
- Update black version to the latest
- Run black auto formatting over the codebase
- Run autoformatting according to [`docs/code_style.md
`](https://github.com/matrix-org/synapse/blob/80d6dc9783aa80886a133756028984dbf8920168/docs/code_style.md)
- Update `code_style.md` docs around installing black to use the correct version
|
|
|
|
| |
Ensure that we lock correctly to prevent multiple concurrent metadata load
requests, and generally clean up the way we construct the metadata cache.
|
|
|
| |
And convert some inlineDeferreds to async-friendly functions.
|
|
|
|
| |
This has the side-effect of being able to remove use of `inlineCallbacks`
in the test-cases for cleaner tracebacks.
|
| |
|
| |
|
| |
|
|\ |
|
| | |
|
|/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the final step for supporting multiple OIDC providers concurrently.
First of all, we reorganise the config so that you can specify a list of OIDC providers, instead of a single one. Before:
oidc_config:
enabled: true
issuer: "https://oidc_provider"
# etc
After:
oidc_providers:
- idp_id: prov1
issuer: "https://oidc_provider"
- idp_id: prov2
issuer: "https://another_oidc_provider"
The old format is still grandfathered in.
With that done, it's then simply a matter of having OidcHandler instantiate a new OidcProvider for each configured provider.
|
|
|
|
|
| |
* make the OIDC bits of the test work at a higher level - via the REST api instead of poking the OIDCHandler directly.
* Move it to test_login.py, where I think it fits better.
|
|
|
|
|
| |
Again in preparation for handling more than one OIDC provider, add a new caveat to the macaroon used as an OIDC session cookie, which remembers which OIDC provider we are talking to. In future, when we get a callback, we'll need it to make sure we talk to the right IdP.
As part of this, I'm adding an idp_id and idp_name field to the OIDC configuration object. They aren't yet documented, and we'll just use the old values by default.
|
|
|
|
|
|
|
| |
The idea here is that we will have an instance of OidcProvider for each
configured IdP, with OidcHandler just doing the marshalling of them.
For now it's still hardcoded with a single provider.
|
|
|
|
|
|
|
|
| |
Some light refactoring of OidcHandler, in preparation for bigger things:
* remove inheritance from deprecated BaseHandler
* add an object to hold the things that go into a session cookie
* factor out a separate class for manipulating said cookies
|
|
|
| |
This only applies if the user's data is to be erased.
|
|
|
|
|
|
|
|
|
|
|
| |
SynapseRequest is in danger of becoming a bit of a dumping-ground for "useful stuff relating to Requests",
which isn't really its intention (its purpose is to override render, finished and connectionLost to set up the
LoggingContext and write the right entries to the request log).
Putting utility functions inside SynapseRequest means that lots of our code ends up requiring a
SynapseRequest when there is nothing synapse-specific about the Request at all, and any old
twisted.web.iweb.IRequest will do. This increases code coupling and makes testing more difficult.
In short: move get_user_agent out to a utility function.
|
|
|
| |
If we are lacking an optional dependency, skip the tests that rely on it.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes #8876.
|
|
|
|
|
|
|
|
|
|
| |
Fixes a bug that deactivated users appear in the directory when their profile information was updated.
To change profile information of deactivated users is neccesary for example you will remove displayname or avatar.
But they should not appear in directory. They are deactivated.
Co-authored-by: Erik Johnston <erikj@jki.re>
|
|
|
| |
This is another part of my work towards fixing #8876. It moves some of the logic currently in the SAML and OIDC handlers - in particular the call to `AuthHandler.complete_sso_login` down into the `SsoHandler`.
|
|\
| |
| | |
More preparatory refactoring of the OidcHandler tests
|
| |
| |
| |
| |
| |
| | |
... so that we can test its behaviour when it raises.
Also pull it out to the top level so that I can use it from other test classes.
|
| |
| |
| |
| | |
The tests that need this all do it already.
|
| |
| |
| |
| |
| | |
despite the warnings saying "don't implement get_extra_attributes", we had
implemented it, so the tests weren't doing what we thought they were.
|
|/
|
|
| |
This was never used, so let's get rid of it.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* move simple_async_mock to test_utils
... so that it can be re-used
* Remove references to `SamlHandler._map_saml_response_to_user` from tests
This method is going away, so we can no longer use it as a test point. Instead,
factor out a higher-level method which takes a SAML object, and verify correct
behaviour by mocking out `AuthHandler.complete_sso_login`.
* changelog
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Remove references to handler._auth_handler
(and replace them with hs.get_auth_handler)
* Factor out a utility function for building Requests
* Remove mocks of `OidcHandler._map_userinfo_to_user`
This method is going away, so mocking it out is no longer a valid approach.
Instead, we mock out lower-level methods (eg _remote_id_from_userinfo), or
simply allow the regular implementation to proceed and update the expectations
accordingly.
* Remove references to `OidcHandler._map_userinfo_to_user` from tests
This method is going away, so we can no longer use it as a test point. Instead
we build mock "callback" requests which we pass into `handle_oidc_callback`,
and verify correct behaviour by mocking out `AuthHandler.complete_sso_login`.
|
|
|
|
| |
Spam checker modules can now provide async methods. This is implemented
in a backwards-compatible manner.
|
| |
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.24.0rc2 (2020-12-04)
==============================
Bugfixes
--------
- Fix a regression in v1.24.0rc1 which failed to allow SAML mapping providers which were unable to redirect users to an additional page. ([\#8878](https://github.com/matrix-org/synapse/issues/8878))
Internal Changes
----------------
- Add support for the `prometheus_client` newer than 0.9.0. Contributed by Jordan Bancino. ([\#8875](https://github.com/matrix-org/synapse/issues/8875))
|
| |
| |
| |
| |
| | |
(#8878)
This was broken in #8801.
|
|\ \ |
|
| |\ \
| | | |
| | | | |
UIA: offer only available auth flows
|
| | | | |
|
| | |/
| | |
| | |
| | |
| | | |
A few test cases were relying on being able to mount non-client servlets on the
test resource. it's better to give them their own Resources.
|
| | |
| | |
| | |
| | | |
This is now only used in `test_typing`, so move it there.
|
|/ / |
|
|/
|
|
|
|
|
|
|
|
|
|
| |
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
|
|
|
|
|
|
| |
This was broken in #8801 when abstracting code shared with OIDC.
After this change both SAML and OIDC have a concept of
grandfathering users, but with different implementations.
|
| |
|
|
|
|
| |
The idea here is to abstract out all the conditional code which tests which
methods a given password provider has, to provide a consistent interface.
|
|
|
|
|
|
|
|
|
|
| |
The spec requires synapse to support `identifier` dicts for `m.login.password`
user-interactive auth, which it did not (instead, it required an undocumented
`user` parameter.)
To fix this properly, we need to pull the code that interprets `identifier`
into `AuthHandler.validate_login` so that it can be called from the UIA code.
Fixes #5665.
|
|
|
| |
Fix a minor bug where we would offer "m.login.password" login if a custom auth provider supported it, even if password login was disabled.
|
|
|
|
| |
These things seemed to be completely untested, so I added a load of tests for
them.
|
|
|
|
|
| |
(#8565)
Changes `@cache_in_self` to use underscore-prefixed attributes.
|
|
|
|
| |
Abstracts the SAML and OpenID Connect code which attempts to regenerate
the localpart of a matrix ID if it is already in use.
|
|
|
|
|
|
| |
Checks that the localpart returned by mapping providers for SAML and
OIDC are valid before registering new users.
Extends the OIDC tests for existing users and invalid data.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Consistently use room_id from federation request body
Some federation APIs have a redundant `room_id` path param (see
https://github.com/matrix-org/matrix-doc/issues/2330). We should make sure we
consistently use either the path param or the body param, and the body param is
easier.
* Kill off some references to "context"
Once upon a time, "rooms" were known as "contexts". I think this kills of the
last references to "contexts".
|
|\
| |
| | |
Make `make_request` actually render the request
|
| | |
|
| |
| |
| | |
De-duplicates code between the SAML and OIDC implementations.
|
|/ |
|
|
|
| |
Fixes #4042
|
|
|
|
|
|
|
|
|
|
| |
another user. (#8616)
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
|
|
|
|
|
|
|
| |
#8567 started a span for every background process. This is good as it means all Synapse code that gets run should be in a span (unless in the sentinel logging context), but it means we generate about 15x the number of spans as we did previously.
This PR attempts to reduce that number by a) not starting one for send commands to Redis, and b) deferring starting background processes until after we're sure they're necessary.
I don't really know how much this will help.
|
| |
|
|\
| |
| | |
Simplify `_locally_reject_invite`
|
| |
| |
| |
| |
| | |
Update `EventCreationHandler.create_event` to accept an auth_events param, and
use it in `_locally_reject_invite` instead of reinventing the wheel.
|
| |
| |
| |
| | |
this is always the same as requester.access_token_id.
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(#8536)
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
|
| |
|
|
|
|
|
| |
(#8476)
Should fix #3365.
|
|
|
| |
All handlers now available via get_*_handler() methods on the HomeServer.
|
| |
|
|
|
|
| |
This allows a user to store an offline device on the server and
then restore it at a subsequent login.
|
|\
| |
| | |
Reduce inconsistencies between codepaths for membership and non-membership events.
|
| |
| |
| |
| | |
This is now redundant, and we can just call `handle_new_client_event` directly.
|
|/ |
|
|
|
| |
This allows for connecting to certain IdPs, e.g. GitLab.
|
| |
|
|
|
|
|
|
|
| |
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
|
|
|
|
|
|
|
|
|
| |
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
|
|
|
|
|
|
|
| |
This converts calls like super(Foo, self) -> super().
Generated with:
sed -i "" -Ee 's/super\([^\(]+\)/super()/g' **/*.py
|
| |
|
|
|
|
|
| |
`pusher_pool.on_new_notifications` expected a min and max stream ID, however that was not what we were passing in. Instead, let's just pass it the current max stream ID and have it track the last stream ID it got passed.
I believe that it mostly worked as we called the function for every event. However, it would break for events that got persisted out of order, i.e, that were persisted but the max stream ID wasn't incremented as not all preceding events had finished persisting, and push for that event would be delayed until another event got pushed to the effected users.
|
|
|
|
| |
This reverts commit e7fd336a53a4ca489cdafc389b494d5477019dc0.
|
| |
|
| |
|
|
|
|
|
|
|
| |
'populate_stats_process_rooms' again (#8243)
Fixes https://github.com/matrix-org/synapse/issues/8238
Alongside the delta file, some changes were also necessary to the codebase to remove references to the now defunct `populate_stats_process_rooms_2` background job. Thankfully the latter doesn't seem to have made it into any documentation yet :)
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
| |
async/await (#8063)
|
| |
|
|
|
|
| |
database to async (#8042)
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
`StatsHandler` handles updates to the `current_state_delta_stream`, and updates room stats such as the amount of state events, joined users, etc.
However, it counts every new join membership as a new user entering a room (and that user being in another room), whereas it's possible for a user's membership status to go from join -> join, for instance when they change their per-room profile information.
This PR adds a check for join->join membership transitions, and bails out early, as none of the further checks are necessary at that point.
Due to this bug, membership stats in many rooms have ended up being wildly larger than their true values. I am not sure if we also want to include a migration step which recalculates these statistics (possibly using the `_populate_stats_process_rooms` bg update).
Bug introduced in the initial implementation https://github.com/matrix-org/synapse/pull/4338.
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
| |
The CI appears to use the latest version of isort, which is a problem when isort gets a major version bump. Rather than try to pin the version, I've done the necessary to make isort5 happy with synapse.
|
| |
|
| |
|
| |
|
|
|
|
|
|
|
|
|
| |
Fixes https://github.com/matrix-org/synapse/issues/2431
Adds config option `encryption_enabled_by_default_for_room_type`, which determines whether encryption should be enabled with the default encryption algorithm in private or public rooms upon creation. Whether the room is private or public is decided based upon the room creation preset that is used.
Part of this PR is also pulling out all of the individual instances of `m.megolm.v1.aes-sha2` into a constant variable to eliminate typos ala https://github.com/matrix-org/synapse/pull/7637
Based on #7637
|
| |
|
|
|
|
| |
Fixes https://github.com/matrix-org/synapse/issues/3177
|
|
|
|
|
|
|
|
|
|
| |
While working on https://github.com/matrix-org/synapse/issues/5665 I found myself digging into the `Ratelimiter` class and seeing that it was both:
* Rather undocumented, and
* causing a *lot* of config checks
This PR attempts to refactor and comment the `Ratelimiter` class, as well as encourage config file accesses to only be done at instantiation.
Best to be reviewed commit-by-commit.
|
|
|
|
|
|
|
|
| |
@uhoreg has confirmed these were both typos. They are only in comments and tests though, rather than anything critical.
Introduced in:
* https://github.com/matrix-org/synapse/pull/7157
* https://github.com/matrix-org/synapse/pull/5726
|
|
|
|
|
|
|
| |
The idea here is that if an instance persists an event via the replication HTTP API it can return before we receive that event over replication, which can lead to races where code assumes that persisting an event immediately updates various caches (e.g. current state of the room).
Most of Synapse doesn't hit such races, so we don't do the waiting automagically, instead we do so where necessary to avoid unnecessary delays. We may decide to change our minds here if it turns out there are a lot of subtle races going on.
People probably want to look at this commit by commit.
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|\
| |
| | |
Add tests for outbound device pokes
|
| |
| |
| |
| |
| | |
this is never set to anything other than "test", and is a source of unnecessary
boilerplate.
|
|/ |
|
|
|
|
|
|
|
| |
(#7053)"
This reverts commit 54dd28621b070ca67de9f773fe9a89e1f4dc19da, reversing
changes made to 6640460d054e8f4444046a34bdf638921b31c01e.
|
|\ |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
|/ |
|
|
|
|
|
| |
When we get an invite over federation, store the room version in the rooms table.
The general idea here is that, when we pull the invite out again, we'll want to know what room_version it belongs to (so that we can later redact it if need be). So we need to store it somewhere...
|
| |
|
|
|
|
| |
Ensure good comprehension hygiene using flake8-comprehensions.
|
|
|
|
|
| |
these were getting a bit unwieldy, so let's combine `check_joined_room` and
`check_user_was_in_room` into a single `check_user_in_room`.
|
|
|
| |
Stop sending events when creating or deleting associations (room aliases). Send an updated canonical alias event if one of the alt_aliases is deleted.
|