| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |\
| |
| |
| | |
bbz/info-mainline-1.21.2
|
| | |
| |
| |
| |
| |
| |
| |
| | |
We asserted that the IDs returned by postgres sequence was greater than
any we had seen, however this is technically racey as we may update the
current positions out of order.
We now assert that the sequences are correct on startup, so the
assertion is no longer really required, so we remove them.
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
|
| | | |
|
| | |
| |
| |
| |
| | |
#7124 changed the behaviour of remote thumbnails so that the thumbnailing method was included in the filename of the thumbnail. To support existing files, it included a fallback so that we would check the old filename if the new filename didn't exist.
Unfortunately, it didn't apply this logic to storage providers, so any thumbnails stored on such a storage provider was broken.
|
| | |
| |
| |
| |
| |
| |
| |
| | |
For negative streams we have to negate the internal stream ID before
querying the DB.
The effect of this bug was to query far too many rows, slowing start up
time, but we would correctly filter the results afterwards so there was
no ill effect.
|
| | |
| |
| | |
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
|
| | | |
|
| | | |
|
| | |
| |
| | |
Introduced in #8236
|
| | |
| |
| |
| | |
we're not doing a final release yet!
|
| | | |
|
| | |
| |
| |
| |
| | |
Add a pair of federation metrics to track the delays in sending PDUs to/from
particular servers.
|
| | |
| |
| | |
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
|
| | |\
| | |
| | | |
Add an improved "forward extremities" metric
|
| | | |
| | |
| | |
| | |
| | | |
Hopefully, N(extremities) * N(state_events) is a more realistic approximation
to "how big a problem is this room?".
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This was a bit unweildy for what I wanted: in particular, I wanted to assign
each measurement straight into a bucket, rather than storing an intermediate
Counter which didn't do any bucketing at all.
I've replaced it with something that is hopefully a bit easier to use.
(I'm not entirely sure what the difference between a HistogramMetricFamily and
a GaugeHistogramMetricFamily is, but given our counters can go down as well as
up the latter *sounds* more accurate?)
|
| | | |
| | |
| | |
| | |
| | |
| | | |
Our hacked-up `_exposition.py` was stripping out some samples it shouldn't
have been. Put them back in, to more closely match the upstream
`exposition.py`.
|
| | |/ |
|
| | |
| |
| |
| | |
Drop compatibility hacks for prometheus-client pre 0.4.0. Debian stretch and
Fedora 31 both have newer versions, so hopefully this will be ok.
|
| | |\
| | |
| | | |
Report metrics on expensive rooms for state res
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | |/ |
|
| | | |
|
| | |\
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* Don't check whether a 3pid is allowed to register during password reset
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
* Changelog
|
| | | |\
| | | |
| | | |
| | | | |
anoa/info-mainline-no-check-password-reset
|
| | | | |
| | | |
| | | |
| | | |
| | | | |
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
* Fix table scan of events on worker startup.
This happened because we assumed "new" writers had an initial stream
position of 0, so the replication code tried to fetch all events written
by the instance between 0 and the current position.
Instead, set the initial position of new writers to the current
persisted up to position, on the assumption that new writers won't have
written anything before that point.
* Consider old writers coming back as "new".
Otherwise we'd try and fetch entries between the old stale token and the
current position, even though it won't have written any rows.
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| | | |/
| |/|
| | | |
For some reason, an apparently unrelated PR upset mypy about this module. Here are a number of little fixes.
|
| | | |
| | |
| | | |
This is an attempt to fix #8403.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
Broken in https://github.com/matrix-org/synapse/pull/8275 and has yet to be put in a release. Fixes https://github.com/matrix-org/synapse/issues/8418.
`next_link` is an optional parameter. However, we were checking whether the `next_link` param was valid, even if it wasn't provided. In that case, `next_link` was `None`, which would clearly not be a valid URL.
This would prevent password reset and other operations if `next_link` was not provided, and the `next_link_domain_whitelist` config option was set.
|
| | | |
| | |
| | | |
One hope is that this might provide some insights into #3365.
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Remove `on_timeout_cancel` from `timeout_deferred`
The `on_timeout_cancel` param to `timeout_deferred` wasn't always called on a
timeout (in particular if the canceller raised an exception), so it was
unreliable. It was also only used in one place, and to be honest it's easier to
do what it does a different way.
* Fix handling of connection timeouts in outgoing http requests
Turns out that if we get a timeout during connection, then a different
exception is raised, which wasn't always handled correctly.
To fix it, catch the exception in SimpleHttpClient and turn it into a
RequestTimedOutError (which is already a documented exception).
Also add a description to RequestTimedOutError so that we can see which stage
it failed at.
* Fix incorrect handling of timeouts reading federation responses
This was trapping the wrong sort of TimeoutError, so was never being hit.
The effect was relatively minor, but we should fix this so that it does the
expected thing.
* Fix inconsistent handling of `timeout` param between methods
`get_json`, `put_json` and `delete_json` were applying a different timeout to
the response body to `post_json`; bring them in line and test.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Fix test_verify_json_objects_for_server_awaits_previous_requests
It turns out that this wasn't really testing what it thought it was testing
(in particular, `check_context` was turning failures into success, which was
making the tests pass even though it wasn't clear they should have been.
It was also somewhat overcomplex - we can test what it was trying to test
without mocking out perspectives servers.
* Fix warnings about finished logcontexts in the keyring
We need to make sure that we finish the key fetching magic before we run the
verifying code, to ensure that we don't mess up our logcontexts.
|
| | |
| |
| |
| |
| |
| |
| | |
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
|
| | |
| |
| |
| |
| | |
Fixes #8395.
|
| | |\ |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
On startup `MultiWriteIdGenerator` fetches the maximum stream ID for
each instance from the table and uses that as its initial "current
position" for each writer. This is problematic as a) it involves either
a scan of events table or an index (neither of which is ideal), and b)
if rows are being persisted out of order elsewhere while the process
restarts then using the maximum stream ID is not correct. This could
theoretically lead to race conditions where e.g. events that are
persisted out of order are not sent down sync streams.
We fix this by creating a new table that tracks the current positions of
each writer to the stream, and update it each time we finish persisting
a new entry. This is a relatively small overhead when persisting events.
However for the cache invalidation stream this is a much bigger relative
overhead, so instead we note that for invalidation we don't actually
care about reliability over restarts (as there's no caches to
invalidate) and simply don't bother reading and writing to the new table
in that particular case.
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
|
| | | |
| | |
| | | |
this makes it possible to use from the manhole, and seems cleaner anyway.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
I'd like to get a better insight into what we are doing with respect to state
res. The list of state groups we are resolving across should be short (if it
isn't, that's a massive problem in itself), so it should be fine to log it in
ite entiretly.
I've done some grepping and found approximately zero cases in which the
"shortcut" code delivered the result, so I've ripped that out too.
|
| | | | |
|
| | | |
| | |
| | | |
This will allow us to hit the DB after we've finished using the generated stream ID.
|
| | | | |
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
When updating the `room_stats_state` table, we try to check for null bytes slipping in to the content for state events. It turns out we had added `guest_access` as a field to room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a `m.room.guest_access` event then breaks `room_stats_state` updates.
This PR adds the check for `guest_access`.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
When updating room_stats_state, we try to check for null bytes slipping
in to the
content for state events. It turns out we had added guest_access as a
field to
room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a m.room.guest_access event then breaks
room_stats_state
updates.
This PR adds the check for guest_access. A further PR will improve this
function so that this hopefully does not happen again in future.
|
| | |/ /
| | |
| | | |
moves non-runtime dependencies out of synapse.python_dependencies (test and lint)
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fixes: #8359
Trying to reactivate a user with the admin API (`PUT /_synapse/admin/v2/users/<user_name>`) causes an internal server error.
Seems to be a regression in #8033.
|
| | | |
| | |
| | | |
Add an admin API to read entries of table `event_reports`. API: `GET /_synapse/admin/v1/event_reports`
|
| | |\ \ |
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
|
| | | | | |
|
| | | | | |
|
| | |\ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Synapse 1.20.0rc5 (2020-09-18)
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
|
| | | | | |
| | | | |
| | | | |
| | | | | |
Add a new admin API `GET /_synapse/admin/v1/users/<user_id>/joined_rooms` to
list all rooms where a user is a member.
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Fix _set_destination_retry_timings
This came about because the code assumed that retry_interval
could not be NULL — which has been challenged by catch-up.
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This converts calls like super(Foo, self) -> super().
Generated with:
sed -i "" -Ee 's/super\([^\(]+\)/super()/g' **/*.py
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | |\ \ \ \ |
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Lint dependencies can now be installed with pip install -e ".[lint]"
This should help keep the version in sync between tox and documentation.
|
| | | | | | | |
|
| | | | | | |
| | | | | |
| | | | | | |
This reduces duplication of the admin prefix in regular expressions.
|
| | | | | | |
| | | | | |
| | | | | | |
Replaced with less buggier control flow
|
| | | | | | | |
|
| | |\ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Synapse 1.20.0rc4 (2020-09-16)
==============================
Synapse 1.20.0rc4 is identical to 1.20.0rc3, with the addition of the security fix that was included in 1.19.2.
|
| | |\ \ \ \ \ \ |
|
| | | | | | | | | |
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
slots use less memory (and attribute access is faster) while slightly
limiting the flexibility of the class attributes. This focuses on objects
which are instantiated "often" and for short periods of time.
|
| | | | | | | | | |
|
| | | | | | | | | |
|
| | | | | | | | | |
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
|
| | |\ \ \ \ \ \ \
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Synapse 1.20.0rc3 (2020-09-11)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
|
| | | | | | | | | | |
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
The idea here is that we pass the `max_stream_id` to everything, and only use the stream ID of the particular event to figure out *when* the max stream position has caught up to the event and we can notify people about it.
This is to maintain the distinction between the position of an item in the stream (i.e. event A has stream ID 513) and a token that can be used to partition the stream (i.e. give me all events after stream ID 352). This distinction becomes important when the tokens are more complicated than a single number, which they will be once we start tracking the position of multiple writers in the tokens.
The valid operations here are:
1. Is a position before or after a token
2. Fetching all events between two tokens
3. Merging multiple tokens to get the "max", i.e. `C = max(A, B)` means that for all positions P where P is before A *or* before B, then P is before C.
Future PR will change the token type to a dedicated type.
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
|
| | |\ \ \ \ \ \ \ \ |
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
If a file cannot be thumbnailed for some reason (e.g. the file is empty), then
catch the exception and convert it to a reasonable error message for the client.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Removes the `user_joined_room` and stops calling it since there are no observers.
Also cleans-up some other unused signals and related code.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
`pusher_pool.on_new_notifications` expected a min and max stream ID, however that was not what we were passing in. Instead, let's just pass it the current max stream ID and have it track the last stream ID it got passed.
I believe that it mostly worked as we called the function for every event. However, it would break for events that got persisted out of order, i.e, that were persisted but the max stream ID wasn't incremented as not all preceding events had finished persisting, and push for that event would be delayed until another event got pushed to the effected users.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
This reverts commit e7fd336a53a4ca489cdafc389b494d5477019dc0.
|
| | | | | | | | | | | |
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
missing push rules in `.../actions` and `.../enabled` (#7796)
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| | | | | | | | | | | |
|
| | | | | | | | | | | |
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
This fixes an issue where different methods (crop/scale) overwrite each other.
This first tries the new path. If that fails and we are looking for a
remote thumbnail, it tries the old path. If that still isn't found, it
continues as normal.
This should probably be removed in the future, after some of the newer
thumbnails were generated with the new path on most deployments. Then
the overhead should be minimal if the other thumbnails need to be
regenerated.
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
The intention here is to change `StreamToken.room_key` to be a `RoomStreamToken` in a future PR, but that is a big enough change without this refactoring too.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
whitelist (#8275)
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
This removes `SourcePaginationConfig` and `get_pagination_rows`. The reasoning behind this is that these generic classes/functions erased the types of the IDs it used (i.e. instead of passing around `StreamToken` it'd pass in e.g. `token.room_key`, which don't have uniform types).
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Update `log_function` to use the right factory to create log records, to make
sure that they have `request` attributes.
Fixes: #8267.
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
It did not correctly handle IDs finishing being persisted out of
order, resulting in the `current_position` lagging until new IDs are
persisted.
|
| | |\ \ \ \ \ \ \ \ \
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Synapse 1.20.0rc1 (2020-09-08)
==============================
Removal warning
---------------
Some older clients used a [disallowed character](https://matrix.org/docs/spec/client_server/r0.6.1#post-matrix-client-r0-register-email-requesttoken) (`:`) in the `client_secret` parameter of various endpoints. The incorrect behaviour was allowed for backwards compatibility, but is now being removed from Synapse as most users have updated their client. Further context can be found at [\#6766](https://github.com/matrix-org/synapse/issues/6766).
Features
--------
- Add an endpoint to query your shared rooms with another user as an implementation of [MSC2666](https://github.com/matrix-org/matrix-doc/pull/2666). ([\#7785](https://github.com/matrix-org/synapse/issues/7785))
- Iteratively encode JSON to avoid blocking the reactor. ([\#8013](https://github.com/matrix-org/synapse/issues/8013), [\#8116](https://github.com/matrix-org/synapse/issues/8116))
- Add support for shadow-banning users (ignoring any message send requests). ([\#8034](https://github.com/matrix-org/synapse/issues/8034), [\#8092](https://github.com/matrix-org/synapse/issues/8092), [\#8095](https://github.com/matrix-org/synapse/issues/8095), [\#8142](https://github.com/matrix-org/synapse/issues/8142), [\#8152](https://github.com/matrix-org/synapse/issues/8152), [\#8157](https://github.com/matrix-org/synapse/issues/8157), [\#8158](https://github.com/matrix-org/synapse/issues/8158), [\#8176](https://github.com/matrix-org/synapse/issues/8176))
- Use the default template file when its equivalent is not found in a custom template directory. ([\#8037](https://github.com/matrix-org/synapse/issues/8037), [\#8107](https://github.com/matrix-org/synapse/issues/8107), [\#8252](https://github.com/matrix-org/synapse/issues/8252))
- Add unread messages count to sync responses, as specified in [MSC2654](https://github.com/matrix-org/matrix-doc/pull/2654). ([\#8059](https://github.com/matrix-org/synapse/issues/8059), [\#8254](https://github.com/matrix-org/synapse/issues/8254), [\#8270](https://github.com/matrix-org/synapse/issues/8270), [\#8274](https://github.com/matrix-org/synapse/issues/8274))
- Optimise `/federation/v1/user/devices/` API by only returning devices with encryption keys. ([\#8198](https://github.com/matrix-org/synapse/issues/8198))
Bugfixes
--------
- Fix a memory leak by limiting the length of time that messages will be queued for a remote server that has been unreachable. ([\#7864](https://github.com/matrix-org/synapse/issues/7864))
- Fix `Re-starting finished log context PUT-nnnn` warning when event persistence failed. ([\#8081](https://github.com/matrix-org/synapse/issues/8081))
- Synapse now correctly enforces the valid characters in the `client_secret` parameter used in various endpoints. ([\#8101](https://github.com/matrix-org/synapse/issues/8101))
- Fix a bug introduced in v1.7.2 impacting message retention policies that would allow federated homeservers to dictate a retention period that's lower than the configured minimum allowed duration in the configuration file. ([\#8104](https://github.com/matrix-org/synapse/issues/8104))
- Fix a long-standing bug where invalid JSON would be accepted by Synapse. ([\#8106](https://github.com/matrix-org/synapse/issues/8106))
- Fix a bug introduced in Synapse v1.12.0 which could cause `/sync` requests to fail with a 404 if you had a very old outstanding room invite. ([\#8110](https://github.com/matrix-org/synapse/issues/8110))
- Return a proper error code when the rooms of an invalid group are requested. ([\#8129](https://github.com/matrix-org/synapse/issues/8129))
- Fix a bug which could cause a leaked postgres connection if synapse was set to daemonize. ([\#8131](https://github.com/matrix-org/synapse/issues/8131))
- Clarify the error code if a user tries to register with a numeric ID. This bug was introduced in v1.15.0. ([\#8135](https://github.com/matrix-org/synapse/issues/8135))
- Fix a bug where appservices with ratelimiting disabled would still be ratelimited when joining rooms. This bug was introduced in v1.19.0. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix logging in via OpenID Connect with a provider that uses integer user IDs. ([\#8190](https://github.com/matrix-org/synapse/issues/8190))
- Fix a longstanding bug where user directory updates could break when unexpected profile data was included in events. ([\#8223](https://github.com/matrix-org/synapse/issues/8223))
- Fix a longstanding bug where stats updates could break when unexpected profile data was included in events. ([\#8226](https://github.com/matrix-org/synapse/issues/8226))
- Fix slow start times for large servers by removing a table scan of the `users` table from startup code. ([\#8271](https://github.com/matrix-org/synapse/issues/8271))
Updates to the Docker image
---------------------------
- Fix builds of the Docker image on non-x86 platforms. ([\#8144](https://github.com/matrix-org/synapse/issues/8144))
- Added curl for healthcheck support and readme updates for the change. Contributed by @maquis196. ([\#8147](https://github.com/matrix-org/synapse/issues/8147))
Improved Documentation
----------------------
- Link to matrix-synapse-rest-password-provider in the password provider documentation. ([\#8111](https://github.com/matrix-org/synapse/issues/8111))
- Updated documentation to note that Synapse does not follow `HTTP 308` redirects due to an upstream library not supporting them. Contributed by Ryan Cole. ([\#8120](https://github.com/matrix-org/synapse/issues/8120))
- Explain better what GDPR-erased means when deactivating a user. ([\#8189](https://github.com/matrix-org/synapse/issues/8189))
Internal Changes
----------------
- Add filter `name` to the `/users` admin API, which filters by user ID or displayname. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#7377](https://github.com/matrix-org/synapse/issues/7377), [\#8163](https://github.com/matrix-org/synapse/issues/8163))
- Reduce run times of some unit tests by advancing the reactor a fewer number of times. ([\#7757](https://github.com/matrix-org/synapse/issues/7757))
- Don't fail `/submit_token` requests on incorrect session ID if `request_token_inhibit_3pid_errors` is turned on. ([\#7991](https://github.com/matrix-org/synapse/issues/7991))
- Convert various parts of the codebase to async/await. ([\#8071](https://github.com/matrix-org/synapse/issues/8071), [\#8072](https://github.com/matrix-org/synapse/issues/8072), [\#8074](https://github.com/matrix-org/synapse/issues/8074), [\#8075](https://github.com/matrix-org/synapse/issues/8075), [\#8076](https://github.com/matrix-org/synapse/issues/8076), [\#8087](https://github.com/matrix-org/synapse/issues/8087), [\#8100](https://github.com/matrix-org/synapse/issues/8100), [\#8119](https://github.com/matrix-org/synapse/issues/8119), [\#8121](https://github.com/matrix-org/synapse/issues/8121), [\#8133](https://github.com/matrix-org/synapse/issues/8133), [\#8156](https://github.com/matrix-org/synapse/issues/8156), [\#8162](https://github.com/matrix-org/synapse/issues/8162), [\#8166](https://github.com/matrix-org/synapse/issues/8166), [\#8168](https://github.com/matrix-org/synapse/issues/8168), [\#8173](https://github.com/matrix-org/synapse/issues/8173), [\#8191](https://github.com/matrix-org/synapse/issues/8191), [\#8192](https://github.com/matrix-org/synapse/issues/8192), [\#8193](https://github.com/matrix-org/synapse/issues/8193), [\#8194](https://github.com/matrix-org/synapse/issues/8194), [\#8195](https://github.com/matrix-org/synapse/issues/8195), [\#8197](https://github.com/matrix-org/synapse/issues/8197), [\#8199](https://github.com/matrix-org/synapse/issues/8199), [\#8200](https://github.com/matrix-org/synapse/issues/8200), [\#8201](https://github.com/matrix-org/synapse/issues/8201), [\#8202](https://github.com/matrix-org/synapse/issues/8202), [\#8207](https://github.com/matrix-org/synapse/issues/8207), [\#8213](https://github.com/matrix-org/synapse/issues/8213), [\#8214](https://github.com/matrix-org/synapse/issues/8214))
- Remove some unused database functions. ([\#8085](https://github.com/matrix-org/synapse/issues/8085))
- Add type hints to various parts of the codebase. ([\#8090](https://github.com/matrix-org/synapse/issues/8090), [\#8127](https://github.com/matrix-org/synapse/issues/8127), [\#8187](https://github.com/matrix-org/synapse/issues/8187), [\#8241](https://github.com/matrix-org/synapse/issues/8241), [\#8140](https://github.com/matrix-org/synapse/issues/8140), [\#8183](https://github.com/matrix-org/synapse/issues/8183), [\#8232](https://github.com/matrix-org/synapse/issues/8232), [\#8235](https://github.com/matrix-org/synapse/issues/8235), [\#8237](https://github.com/matrix-org/synapse/issues/8237), [\#8244](https://github.com/matrix-org/synapse/issues/8244))
- Return the previous stream token if a non-member event is a duplicate. ([\#8093](https://github.com/matrix-org/synapse/issues/8093), [\#8112](https://github.com/matrix-org/synapse/issues/8112))
- Separate `get_current_token` into two since there are two different use cases for it. ([\#8113](https://github.com/matrix-org/synapse/issues/8113))
- Remove `ChainedIdGenerator`. ([\#8123](https://github.com/matrix-org/synapse/issues/8123))
- Reduce the amount of whitespace in JSON stored and sent in responses. ([\#8124](https://github.com/matrix-org/synapse/issues/8124))
- Update the test federation client to handle streaming responses. ([\#8130](https://github.com/matrix-org/synapse/issues/8130))
- Micro-optimisations to `get_auth_chain_ids`. ([\#8132](https://github.com/matrix-org/synapse/issues/8132))
- Refactor `StreamIdGenerator` and `MultiWriterIdGenerator` to have the same interface. ([\#8161](https://github.com/matrix-org/synapse/issues/8161))
- Add functions to `MultiWriterIdGen` used by events stream. ([\#8164](https://github.com/matrix-org/synapse/issues/8164), [\#8179](https://github.com/matrix-org/synapse/issues/8179))
- Fix tests that were broken due to the merge of 1.19.1. ([\#8167](https://github.com/matrix-org/synapse/issues/8167))
- Make `SlavedIdTracker.advance` have the same interface as `MultiWriterIDGenerator`. ([\#8171](https://github.com/matrix-org/synapse/issues/8171))
- Remove unused `is_guest` parameter from, and add safeguard to, `MessageHandler.get_room_data`. ([\#8174](https://github.com/matrix-org/synapse/issues/8174), [\#8181](https://github.com/matrix-org/synapse/issues/8181))
- Standardize the mypy configuration. ([\#8175](https://github.com/matrix-org/synapse/issues/8175))
- Refactor some of `LoginRestServlet`'s helper methods, and move them to `AuthHandler` for easier reuse. ([\#8182](https://github.com/matrix-org/synapse/issues/8182))
- Fix `wait_for_stream_position` to allow multiple waiters on same stream ID. ([\#8196](https://github.com/matrix-org/synapse/issues/8196))
- Make `MultiWriterIDGenerator` work for streams that use negative values. ([\#8203](https://github.com/matrix-org/synapse/issues/8203))
- Refactor queries for device keys and cross-signatures. ([\#8204](https://github.com/matrix-org/synapse/issues/8204), [\#8205](https://github.com/matrix-org/synapse/issues/8205), [\#8222](https://github.com/matrix-org/synapse/issues/8222), [\#8224](https://github.com/matrix-org/synapse/issues/8224), [\#8225](https://github.com/matrix-org/synapse/issues/8225), [\#8231](https://github.com/matrix-org/synapse/issues/8231), [\#8233](https://github.com/matrix-org/synapse/issues/8233), [\#8234](https://github.com/matrix-org/synapse/issues/8234))
- Fix type hints for functions decorated with `@cached`. ([\#8240](https://github.com/matrix-org/synapse/issues/8240))
- Remove obsolete `order` field from federation send queues. ([\#8245](https://github.com/matrix-org/synapse/issues/8245))
- Stop sub-classing from object. ([\#8249](https://github.com/matrix-org/synapse/issues/8249))
- Add more logging to debug slow startup. ([\#8264](https://github.com/matrix-org/synapse/issues/8264))
- Do not attempt to upgrade database schema on worker processes. ([\#8266](https://github.com/matrix-org/synapse/issues/8266), [\#8276](https://github.com/matrix-org/synapse/issues/8276))
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
By importing from canonicaljson the simplejson module was still being used
in some situations. After this change the std lib json is consistenty used
throughout Synapse.
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
'populate_stats_process_rooms' again (#8243)
Fixes https://github.com/matrix-org/synapse/issues/8238
Alongside the delta file, some changes were also necessary to the codebase to remove references to the now defunct `populate_stats_process_rooms_2` background job. Thankfully the latter doesn't seem to have made it into any documentation yet :)
|
| | |\ \ \ \ \ \ \ \ \ \ |
|
| | | | | | | | | | | | | |
|
| | | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
The version 1.3.0 has a bug with unicode charecters:
```
>>> from canonicaljson import encode_pretty_printed_json
>>> encode_pretty_printed_json({'a': 'à'})
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/erdnaxeli/.pyenv/versions/3.6.7/lib/python3.6/site-packages/canonicaljson.py", line 96, in encode_pretty_printed_json
return _pretty_encoder.encode(json_object).encode("ascii")
UnicodeEncodeError: 'ascii' codec can't encode character '\xe0' in position 12: ordinal not in range(128)
```
Signed-off-by: Alexandre Morignot <erdnaxeli@cervoi.se>
Co-authored-by: Alexandre Morignot <erdnaxeli@cervoi.se>
|
| | | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
Fixes: #6467
|
| | |\ \ \ \ \ \ \ \ \ \ \ |
|
| | | | | | | | | | | | | | |
|
| | | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | |
ordering after transmission (#8247)
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| | | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | |
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
|
| | | | | | | | | | | | | | |
|
| | | | | | | | | | | | | | |
|
| | | | | | | | | | | | | | |
|
| | | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | |
This check was preventing people from resetting their passwords unless they
already had a pending invite to that email address, which makes no sense.
|
| |\ \ \ \ \ \ \ \ \ \ \ \ \
| | |_|_|_|_|_|_|_|_|_|_|/
| |/| | | | | | | | | | |
| | | | | | | | | | | | | |
bbz/info-mainline-1.20.1
|
| | | | | | | | | | | | | | |
|
| | | |_|_|_|_|_|_|_|_|_|/
| |/| | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
#8037 changed the default `autoescape` option when rendering Jinja2 templates from `False` to `True`. This caused some bugs, noticeably around redirect URLs being escaped in SAML2 auth confirmation templates, causing those URLs to break for users.
This change returns the previous behaviour as it stood. We may want to look at each template individually and see whether autoescaping is a good idea at some point, but for now lets just fix the breakage.
|
| | | |_|_|_|_|_|_|_|_|/
| |/| | | | | | | | | |
|
| | | | | | | | | | | | |
|
| | |\ \ \ \ \ \ \ \ \ \
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
1.19.3
Synapse 1.19.3 (2020-09-18)
===========================
Bugfixes
--------
- Partially mitigate bug where newly joined servers couldn't get past
events in a room when there is a malformed event.
([\#8350](https://github.com/matrix-org/synapse/issues/8350))
|
| | | | | | | | | | | | | |
|
| | | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
This is a bit of a hack, as `_check_sigs_and_hash_and_fetch` is intended
for attempting to pull an event from the database/(re)pull it from the
server that originally sent the event if checking the signature of the
event fails.
During backfill we *know* that we won't have the event in our database,
however it is still useful to be able to query the original sending
server as the server we're backfilling from may be acting maliciously.
The main benefit and reason for this change however is that
`_check_sigs_and_hash_and_fetch` will drop an event during backfill if
it cannot be successfully validated, whereas the current code will
simply fail the backfill request - resulting in the client's /messages
request silently being dropped.
This is a quick patch to fix backfilling rooms that contain malformed
events. A better implementation in planned in future.
|
| | | | |_|_|_|_|_|/ / /
| | |/| | | | | | | | |
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Instead of just using the most recent extremities let's pick the
ones that will give us results that the pagination request cares about,
i.e. pick extremities only if they have a smaller depth than the
pagination token.
This is useful when we fail to backfill an extremity, as we no longer
get stuck requesting that same extremity repeatedly.
|
| | | |_|_|_|_|_|_|_|/
| |/| | | | | | | | |
|
| | | |_|_|_|_|_|_|/
| |/| | | | | | |
| | | | | | | | | |
c.f. #8295 for rationale
|
| | | | | | | | | | |
|
| | |\| | | | | | |
| | |_|_|_|_|_|/
| |/| | | | | | |
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
This fixes #8319.
|
| |\| | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
bbz/info-mainline-1.20.0
|
| | | | | | | | | |
|
| | | |_|_|_|_|/
| |/| | | | | |
|
| | | | | | | | |
|
| | | |_|_|_|/
| |/| | | | |
|
| | | |_|_|/
| |/| | | |
|
| | | | | |
| | | | |
| | | | |
| | | | | |
marked unread (#8274)
|
| | | | | |
| | | | |
| | | | | |
This takes about 10 seconds in the best case; often more.
|
| | | | | |
| | | | |
| | | | |
| | | | | |
Fix unread counts making sync fail if the value of the `unread_count`
column in `event_push_summary` is `None`.
|
| | | | | |
| | | | |
| | | | |
| | | | | |
I'm hoping this will provide some pointers for debugging
https://github.com/matrix-org/synapse/issues/7968.
|
| | | |_|/
| |/| | |
|
| | | | |
| | | |
| | | |
| | | |
| | | | |
All the callers want this info in the same place, so let's reduce the
duplication by doing it here.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
* Fixup `ALTER TABLE` database queries
Make the new columns nullable, because doing otherwise can wedge a
server with a big database, as setting a default value rewrites the
table.
* Switch back to using the notifications count in the push badge
Clients are likely to be confused if we send a push but the badge count
is the unread messages one, and not the notifications one.
* Changelog
|
| | | |/
| |/|
| | | |
Regressed in #8037.
|
| | | |
| | |
| | | |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
* Revert "Add experimental support for sharding event persister. (#8170)"
This reverts commit 82c1ee1c22a87b9e6e3179947014b0f11c0a1ac3.
* Changelog
|
| | | | |
|
| | | |
| | |
| | | |
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| | | |
| | |
| | | |
I think this is simpler (and moves stuff out of the db threads)
|
| | | |
| | |
| | | |
This requires adding a mypy plugin to fiddle with the type signatures a bit.
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | | |
We have three things which all call `_get_e2e_device_keys_and_signatures_txn`
with their own `runInteraction`. Factor out the common code.
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | | |
We can use the existing `_get_e2e_device_keys_and_signatures_txn` instead of
creating our own txn function
|
| | | |
| | |
| | |
| | |
| | |
| | | |
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* Add shared_rooms api
* Add changelog
* Add .
* Wrap response in {"rooms": }
* linting
* Add unstable_features key
* Remove options from isort that aren't part of 5.x
`-y` and `-rc` are now default behaviour and no longer exist.
`dont-skip` is no longer required
https://timothycrosley.github.io/isort/CHANGELOG/#500-penny-july-4-2020
* Update imports to make isort happy
* Add changelog
* Update tox.ini file with correct invocation
* fix linting again for isort
* Vendor prefix unstable API
* Fix to match spec
* import Codes
* import Codes
* Use FORBIDDEN
* Update changelog.d/7785.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Implement get_shared_rooms_for_users
* a comma
* trailing whitespace
* Handle the easy feedback
* Switch to using runInteraction
* Add tests
* Feedback
* Seperate unstable endpoint from v2
* Add upgrade node
* a line
* Fix style by adding a blank line at EOF.
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Update UPGRADE.rst
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Fix UPGRADE/CHANGELOG unstable paths
unstable unstable unstable
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | | |
this makes it a bit clearer what's going on.
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | | |
... to `_get_e2e_device_keys_and_signatures_txn`, to better reflect what it
does.
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | | |
(#8203)
This is so that we can use it for the backfill events stream.
|
| | | |
| | |
| | | |
This is due to compatibility issues with old Python versions.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* Move `get_devices_with_keys_by_user` to `EndToEndKeyWorkerStore`
this seems a better fit for it.
This commit simply moves the existing code: no other changes at all.
* Rename `get_devices_with_keys_by_user`
to better reflect what it does.
* get_device_stream_token abstract method
To avoid referencing fields which are declared in the derived classes, make
`get_device_stream_token` abstract, and define that in the classes which define
`_device_list_id_gen`.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
... and to show that it does something slightly different to
`_get_e2e_device_keys_txn`.
`include_all_devices` and `include_deleted_devices` were never used (and
`include_deleted_devices` was broken, since that would cause `None`s in the
result which were not handled in the loop below.
Add some typing too.
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | | |
This fixes a bug where having multiple callers waiting on the same
stream and position will cause it to try and compare two deferreds,
which fails (due to the sorted list having an entry of `Tuple[int,
Deferred]`).
|
| | | |
| | |
| | |
| | | |
async (#8197)
|
| | | |
| | |
| | |
| | |
| | | |
There's not much point in returning all the others, and some people have a
silly number of devices.
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
This is split out from https://github.com/matrix-org/synapse/pull/7438, which had gotten rather large.
`LoginRestServlet` has a couple helper methods, `login_submission_legacy_convert` and `login_id_thirdparty_from_phone`. They're primarily used for converting legacy user login submissions to "identifier" dicts ([see spec](https://matrix.org/docs/spec/client_server/r0.6.1#post-matrix-client-r0-login)). Identifying information such as usernames or 3PID information used to be top-level in the login body. They're now supposed to be put inside an [identifier](https://matrix.org/docs/spec/client_server/r0.6.1#identifier-types) parameter instead.
#7438's purpose is to allow using the new identifier parameter during User-Interactive Authentication, which is currently handled in AuthHandler. That's why I've moved these helper methods there. I also moved the refactoring of these method from #7438 as they're relevant.
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | | |
This was forgotten in #8164.
|
| | | |
| | |
| | |
| | | |
insert_many, delete_*) (#8168)
|
| | | | |
|
| | |\| |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | | |
Small cleanup PR.
* Removed the unused `is_guest` argument
* Added a safeguard to a (currently) impossible code path, fixing static checking at the same time.
|
| | | | |
|
| | | |
| | |
| | |
| | | |
(#8171)
|
| | | | |
|
| | | | |
|
| | | | |
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Synapse 1.19.1rc1 (2020-08-25)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.19.0 where appservices with ratelimiting disabled would still be ratelimited when joining rooms. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix a bug introduced in v1.19.0 that would cause e.g. profile updates to fail due to incorrect application of rate limits on join requests. ([\#8153](https://github.com/matrix-org/synapse/issues/8153))
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | | |
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| | | |
| | |
| | |
| | | |
This is mainly so that `StreamIdGenerator` and `MultiWriterIdGenerator`
will have the same interface, allowing them to be used interchangeably.
|
| | | |
| | |
| | | |
Some fixes to wording I noticed after merging #7377.
|
| | | |
| | |
| | |
| | |
| | | |
* Search in columns 'name' and 'displayname' in the admin users endpoint
Signed-off-by: Manuel Stahl <manuel.stahl@awesome-technologies.de>
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
request_token_inhibit_3pid_errors is turned on (#7991)
* Don't raise session_id errors on submit_token if request_token_inhibit_3pid_errors is set
* Changelog
* Also wait some time before responding to /requestToken
* Incorporate review
* Update synapse/storage/databases/main/registration.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Incorporate review
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| | | |
| | |
| | |
| | |
| | |
| | | |
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | | |
It turns out that not all out-of-band membership events are labelled as such,
so we need to be more accepting here.
|
| | | |
| | |
| | |
| | | |
guests. (#8135)
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | | |
... otherwise it gets leaked.
|
| | | |
| | |
| | |
| | |
| | | |
It's just a thin wrapper around two ID gens to make `get_current_token`
and `get_next` return tuples. This can easily be replaced by calling the
appropriate methods on the underlying ID gens directly.
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The function is used for two purposes: 1) for subscribers of streams to
get a token they can use to get further updates with, and 2) for
replication to track position of the writers of the stream.
For streams with a single writer the two scenarios produce the same
result, however the situation becomes complicated for streams with
multiple writers. The current `MultiWriterIdGenerator` does not
correctly handle the first case (which is not an issue as its only used
for the `caches` stream which nothing subscribes to outside of
replication).
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
Closes: https://github.com/matrix-org/synapse/issues/6766
Equivalent Sydent PR: https://github.com/matrix-org/sydent/pull/309
I believe it's now time to remove the extra allowed `:` from `client_secret` parameters.
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | | |
Turns out that part of the codebase (synapse.config.server) checks for this key explicitly. Remove that check.
|
| | | | |
|
| | | |
| | |
| | | |
Fixes https://github.com/matrix-org/synapse/issues/6583
|
| | |\| |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
