| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| | |
|
| |
|
|
|
|
|
|
|
| |
`_locally_reject_invite` generates an out-of-band membership event which can be passed to clients, but not other homeservers.
This is used when we fail to reject an invite over federation. If this happens, we instead just generate a leave event locally and send it down /sync, allowing clients to reject invites even if we can't reach the remote homeserver.
A similar flow needs to be put in place for rescinding knocks. If we're unable to contact any remote server from the room we've tried to knock on, we'd still like to generate and store the leave event locally. Hence the need to reuse, and thus generalise, this method.
Separated from #6739.
|
| |
|
| |
Signed-off-by: Adrian Wannenmacher <tfld@tfld.dev>
|
| |
|
|
|
|
|
|
|
| |
There's a handy function called maybe_store_room_on_invite which allows us to create an entry in the rooms table for a room and its version for which we aren't joined to yet, but we can reference when ingesting events about.
This is currently used for invites where we receive some stripped state about the room and pass it down via /sync to the client, without us being in the room yet.
There is a similar requirement for knocking, where we will eventually do the same thing, and need an entry in the rooms table as well. Thus, reusing this function works, however its name needs to be generalised a bit.
Separated out from #6739.
|
| | |
|
| |
|
| |
add some mdui:UIInfo element examples for saml2_config in homeserver.yaml
|
| |
|
|
|
|
| |
The main use case is to see how many requests are being made, and how
many are second/third/etc attempts. If there are large number of retries
then that likely indicates a delivery problem.
|
| |
|
|
|
| |
This should hopefully speed up `get_auth_chain_difference` a bit in the case of repeated state res on the same rooms.
`get_auth_chain_difference` does a breadth first walk of the auth graphs by repeatedly looking up events' auth events. Different state resolutions on the same room will end up doing a lot of the same event to auth events lookups, so by caching them we should speed things up in cases of repeated state resolutions on the same room.
|
| |
|
|
|
|
| |
`adbapi.ConnectionPool` let's you turn on auto reconnect of DB connections. This is off by default.
As far as I can tell if its not enabled dead connections never get removed from the pool.
Maybe helps #8574
|
| |
|
|
|
|
|
|
|
|
|
| |
* Check support room has only two users
* Create 8728.bugfix
* Update synapse/server_notices/server_notices_manager.py
Co-authored-by: Erik Johnston <erik@matrix.org>
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| | |
|
| |
|
| |
Signed-off-by: Nicolai Søborg <git@xn--sb-lka.org>
|
| |
|
|
|
|
|
| |
Fixes:
```
builtins.TypeError: _reload_logging_config() takes 1 positional argument but 2 were given
```
|
| |
|
|
|
|
|
|
| |
Add `GET /_synapse/admin/v1/statistics/users/media` to get statisics about local media usage by users.
Related to #6094
It is the first API for statistics.
Goal is to avoid/reduce usage of sql queries like [Wiki analyzing Synapse](https://github.com/matrix-org/synapse/wiki/SQL-for-analyzing-Synapse-PostgreSQL-database-stats)
Signed-off-by: Dirk Klimpel dirk@klimpel.org
|
| |
|
| |
Add `displayname` to Shared-Secret Registration for admins to `POST /_synapse/admin/v1/register`
|
| |
|
| |
Fixes #4042
|
| |
|
|
|
|
|
|
| |
This PR fixes two things:
* Corrects the copy/paste error of telling the client their displayname is wrong when they are submitting an `avatar_url`.
* Returns a `M_INVALID_PARAM` instead of `M_UNKNOWN` for non-str type parameters.
Reported by @t3chguy.
|
| |
|
| |
This could be customised to trigger a different kind of notification in the future, but for now it's a normal non-highlight one.
|
| |
|
| |
We do a `SELECT MAX(stream_id) FROM e2e_cross_signing_keys` on startup.
|
| | |
|
| |\ |
|
| | | |
|
| | |
| |
| | |
Fix serialisation errors when using third-party event rules.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Tie together matches_user_in_member_list and get_users_in_room
* changelog
* Remove type to fix mypy
* Add `on_invalidate` to the function signature in the hopes that may make things work well
* Remove **kwargs
* Update 8676.bugfix
|
| | | |
|
| | |
| |
| | |
We don't always need the full power of a DeferredCache.
|
| | |
| |
| | |
Fixes #6755
|
| | |
| |
| | |
Missed in #8671.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Tie together matches_user_in_member_list and get_users_in_room
* changelog
* Remove type to fix mypy
* Add `on_invalidate` to the function signature in the hopes that may make things work well
* Remove **kwargs
* Update 8676.bugfix
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
another user. (#8616)
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
|
| | |
| |
| | |
Cached functions accept an `on_invalidate` function, which we failed to add to the type signature. It's rarely used in the files that we have typed, which is why we haven't noticed it before.
|
| | |
| |
| |
| | |
otherwise non-state events get written as `<FrozenEvent ... state_key='None'>`
which is indistinguishable from state events with the actual state_key `None`.
|
| | |
| |
| |
| |
| | |
By not dropping the membership lock between invites, we can stop joins from
grabbing the lock when we're half-done and slowing the whole thing down.
|
| | |
| |
| |
| |
| |
| |
| | |
This modifies the configuration of structured logging to be usable from
the standard Python logging configuration.
This also separates the formatting of logs from the transport allowing
JSON logs to files or standard logs to sockets.
|
| |\ \
| | |
| | | |
Fix serialisation errors when using third-party event rules.
|
| | | | |
|
| | |/
| |
| |
| |
| |
| | |
Not being able to serialise `frozendicts` is fragile, and it's annoying to have
to think about which serialiser you want. There's no real downside to
supporting frozendicts, so let's just have one json encoder.
|
| | | |
|
| | |
| |
| | |
Add an admin API `GET /_synapse/admin/v1/users/<user_id>/pushers` like https://matrix.org/docs/spec/client_server/latest#get-matrix-client-r0-pushers
|
| | |
| |
| |
| |
| | |
I was trying to make it so that we didn't have to start a background task when handling RDATA, but that is a bigger job (due to all the code in `generic_worker`). However I still think not pulling the event from the DB may help reduce some DB usage due to replication, even if most workers will simply go and pull that event from the DB later anyway.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | |
| |
| |
| |
| |
| |
| |
| | |
This allows trailing commas in multi-line arg lists.
Minor, but we might as well keep our formatting current with regard to
our minimum supported Python version.
Signed-off-by: Dan Callahan <danc@element.io>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This is a requirement for [knocking](https://github.com/matrix-org/synapse/pull/6739), and is abstracting some code that was originally used by the invite flow. I'm separating it out into this PR as it's a fairly contained change.
For a bit of context: when you invite a user to a room, you send them [stripped state events](https://matrix.org/docs/spec/server_server/unstable#put-matrix-federation-v2-invite-roomid-eventid) as part of `invite_room_state`. This is so that their client can display useful information such as the room name and avatar. The same requirement applies to knocking, as it would be nice for clients to be able to display a list of rooms you've knocked on - room name and avatar included.
The reason we're sending membership events down as well is in the case that you are invited to a room that does not have an avatar or name set. In that case, the client should use the displayname/avatar of the inviter. That information is located in the inviter's membership event.
This is optional as knocks don't really have any user in the room to link up to. When you knock on a room, your knock is sent by you and inserted into the room. It wouldn't *really* make sense to show the avatar of a random user - plus it'd be a data leak. So I've opted not to send membership events to the client here. The UX on the client for when you knock on a room without a name/avatar is a separate problem.
In essence this is just moving some inline code to a reusable store method.
|
| | | |
|
| | |
| |
| | |
There's no point starting a background process when all its going to do is bail if federation isn't enabled.
|
| | |
| |
| | |
Add admin API `GET /_synapse/admin/v1/users/<user_id>/media` to get information of users' uploaded files.
|
| |\| |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
it seems to be possible that only one of them ends up to be cached.
when this was the case, the missing one was not fetched via federation,
and clients then failed to validate cross-signed devices.
Signed-off-by: Jonas Jelten <jj@sft.lol>
|
| | |
| |
| | |
This also fixes a bug by fixing handling of an account which doesn't expire.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Split admin API for reported events in detail und list view.
API was introduced with #8217 in synapse v.1.21.0.
It makes the list (`GET /_synapse/admin/v1/event_reports`) less complex and provides a better overview.
The details can be queried with: `GET /_synapse/admin/v1/event_reports/<report_id>`.
It is similar to room and users API.
It is a kind of regression in `GET /_synapse/admin/v1/event_reports`. `event_json` was removed. But the api was introduced one version before and it is an admin API (not under spec).
Signed-off-by: Dirk Klimpel dirk@klimpel.org
|
| | |
| |
| |
| |
| |
| | |
Related to: #6459, #3479
Add `DELETE /_synapse/admin/v1/media/<server_name>/<media_id>` to delete
a single file from server.
|
| | |
| |
| |
| | |
If the user was not in any rooms then the API returned the same error
as if the user did not exist.
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.22.0rc2 (2020-10-26)
==============================
Bugfixes
--------
- Fix bugs where ephemeral events were not sent to appservices. Broke in v1.22.0rc1. ([\#8648](https://github.com/matrix-org/synapse/issues/8648), [\#8656](https://github.com/matrix-org/synapse/issues/8656))
- Fix `user_daily_visits` table to not have duplicate rows per user/device due to multiple user agents. Broke in v1.22.0rc1. ([\#8654](https://github.com/matrix-org/synapse/issues/8654))
|
| | | |
|
| |\| |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Fix user_daily_visits to not have duplicate rows for UA.
Fixes #8641.
* Newsfile
* Fix typo.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
Fixes #8520
Signed-off-by: Pavel Turinsky <pavel.turinsky@matfyz.cz>
Co-authored-by: Erik Johnston <erikj@jki.re>
|
| | |
| |
| |
| |
| |
| |
| | |
#8567 started a span for every background process. This is good as it means all Synapse code that gets run should be in a span (unless in the sentinel logging context), but it means we generate about 15x the number of spans as we did previously.
This PR attempts to reduce that number by a) not starting one for send commands to Redis, and b) deferring starting background processes until after we're sure they're necessary.
I don't really know how much this will help.
|
| | | |
|
| | | |
|
| | |
| |
| |
| | |
This can happen if e.g. the room invited into is no longer on the
server (or if all users left the room).
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.22.0rc1 (2020-10-22)
==============================
Features
--------
- Add a configuration option for always using the "userinfo endpoint" for OpenID Connect. This fixes support for some identity providers, e.g. GitLab. Contributed by Benjamin Koch. ([\#7658](https://github.com/matrix-org/synapse/issues/7658))
- Add ability for `ThirdPartyEventRules` modules to query and manipulate whether a room is in the public rooms directory. ([\#8292](https://github.com/matrix-org/synapse/issues/8292), [\#8467](https://github.com/matrix-org/synapse/issues/8467))
- Add support for olm fallback keys ([MSC2732](https://github.com/matrix-org/matrix-doc/pull/2732)). ([\#8312](https://github.com/matrix-org/synapse/issues/8312), [\#8501](https://github.com/matrix-org/synapse/issues/8501))
- Add support for running background tasks in a separate worker process. ([\#8369](https://github.com/matrix-org/synapse/issues/8369), [\#8458](https://github.com/matrix-org/synapse/issues/8458), [\#8489](https://github.com/matrix-org/synapse/issues/8489), [\#8513](https://github.com/matrix-org/synapse/issues/8513), [\#8544](https://github.com/matrix-org/synapse/issues/8544), [\#8599](https://github.com/matrix-org/synapse/issues/8599))
- Add support for device dehydration ([MSC2697](https://github.com/matrix-org/matrix-doc/pull/2697)). ([\#8380](https://github.com/matrix-org/synapse/issues/8380))
- Add support for [MSC2409](https://github.com/matrix-org/matrix-doc/pull/2409), which allows sending typing, read receipts, and presence events to appservices. ([\#8437](https://github.com/matrix-org/synapse/issues/8437), [\#8590](https://github.com/matrix-org/synapse/issues/8590))
- Change default room version to "6", per [MSC2788](https://github.com/matrix-org/matrix-doc/pull/2788). ([\#8461](https://github.com/matrix-org/synapse/issues/8461))
- Add the ability to send non-membership events into a room via the `ModuleApi`. ([\#8479](https://github.com/matrix-org/synapse/issues/8479))
- Increase default upload size limit from 10M to 50M. Contributed by @Akkowicz. ([\#8502](https://github.com/matrix-org/synapse/issues/8502))
- Add support for modifying event content in `ThirdPartyRules` modules. ([\#8535](https://github.com/matrix-org/synapse/issues/8535), [\#8564](https://github.com/matrix-org/synapse/issues/8564))
Bugfixes
--------
- Fix a longstanding bug where invalid ignored users in account data could break clients. ([\#8454](https://github.com/matrix-org/synapse/issues/8454))
- Fix a bug where backfilling a room with an event that was missing the `redacts` field would break. ([\#8457](https://github.com/matrix-org/synapse/issues/8457))
- Don't attempt to respond to some requests if the client has already disconnected. ([\#8465](https://github.com/matrix-org/synapse/issues/8465))
- Fix message duplication if something goes wrong after persisting the event. ([\#8476](https://github.com/matrix-org/synapse/issues/8476))
- Fix incremental sync returning an incorrect `prev_batch` token in timeline section, which when used to paginate returned events that were included in the incremental sync. Broken since v0.16.0. ([\#8486](https://github.com/matrix-org/synapse/issues/8486))
- Expose the `uk.half-shot.msc2778.login.application_service` to clients from the login API. This feature was added in v1.21.0, but was not exposed as a potential login flow. ([\#8504](https://github.com/matrix-org/synapse/issues/8504))
- Fix error code for `/profile/{userId}/displayname` to be `M_BAD_JSON`. ([\#8517](https://github.com/matrix-org/synapse/issues/8517))
- Fix a bug introduced in v1.7.0 that could cause Synapse to insert values from non-state `m.room.retention` events into the `room_retention` database table. ([\#8527](https://github.com/matrix-org/synapse/issues/8527))
- Fix not sending events over federation when using sharded event writers. ([\#8536](https://github.com/matrix-org/synapse/issues/8536))
- Fix a long standing bug where email notifications for encrypted messages were blank. ([\#8545](https://github.com/matrix-org/synapse/issues/8545))
- Fix increase in the number of `There was no active span...` errors logged when using OpenTracing. ([\#8567](https://github.com/matrix-org/synapse/issues/8567))
- Fix a bug that prevented errors encountered during execution of the `synapse_port_db` from being correctly printed. ([\#8585](https://github.com/matrix-org/synapse/issues/8585))
- Fix appservice transactions to only include a maximum of 100 persistent and 100 ephemeral events. ([\#8606](https://github.com/matrix-org/synapse/issues/8606))
Updates to the Docker image
---------------------------
- Added multi-arch support (arm64,arm/v7) for the docker images. Contributed by @maquis196. ([\#7921](https://github.com/matrix-org/synapse/issues/7921))
- Add support for passing commandline args to the synapse process. Contributed by @samuel-p. ([\#8390](https://github.com/matrix-org/synapse/issues/8390))
Improved Documentation
----------------------
- Update the directions for using the manhole with coroutines. ([\#8462](https://github.com/matrix-org/synapse/issues/8462))
- Improve readme by adding new shield.io badges. ([\#8493](https://github.com/matrix-org/synapse/issues/8493))
- Added note about docker in manhole.md regarding which ip address to bind to. Contributed by @Maquis196. ([\#8526](https://github.com/matrix-org/synapse/issues/8526))
- Document the new behaviour of the `allowed_lifetime_min` and `allowed_lifetime_max` settings in the room retention configuration. ([\#8529](https://github.com/matrix-org/synapse/issues/8529))
Deprecations and Removals
-------------------------
- Drop unused `device_max_stream_id` table. ([\#8589](https://github.com/matrix-org/synapse/issues/8589))
Internal Changes
----------------
- Check for unreachable code with mypy. ([\#8432](https://github.com/matrix-org/synapse/issues/8432))
- Add unit test for event persister sharding. ([\#8433](https://github.com/matrix-org/synapse/issues/8433))
- Allow events to be sent to clients sooner when using sharded event persisters. ([\#8439](https://github.com/matrix-org/synapse/issues/8439), [\#8488](https://github.com/matrix-org/synapse/issues/8488), [\#8496](https://github.com/matrix-org/synapse/issues/8496), [\#8499](https://github.com/matrix-org/synapse/issues/8499))
- Configure `public_baseurl` when using demo scripts. ([\#8443](https://github.com/matrix-org/synapse/issues/8443))
- Add SQL logging on queries that happen during startup. ([\#8448](https://github.com/matrix-org/synapse/issues/8448))
- Speed up unit tests when using PostgreSQL. ([\#8450](https://github.com/matrix-org/synapse/issues/8450))
- Remove redundant database loads of stream_ordering for events we already have. ([\#8452](https://github.com/matrix-org/synapse/issues/8452))
- Reduce inconsistencies between codepaths for membership and non-membership events. ([\#8463](https://github.com/matrix-org/synapse/issues/8463))
- Combine `SpamCheckerApi` with the more generic `ModuleApi`. ([\#8464](https://github.com/matrix-org/synapse/issues/8464))
- Additional testing for `ThirdPartyEventRules`. ([\#8468](https://github.com/matrix-org/synapse/issues/8468))
- Add `-d` option to `./scripts-dev/lint.sh` to lint files that have changed since the last git commit. ([\#8472](https://github.com/matrix-org/synapse/issues/8472))
- Unblacklist some sytests. ([\#8474](https://github.com/matrix-org/synapse/issues/8474))
- Include the log level in the phone home stats. ([\#8477](https://github.com/matrix-org/synapse/issues/8477))
- Remove outdated sphinx documentation, scripts and configuration. ([\#8480](https://github.com/matrix-org/synapse/issues/8480))
- Clarify error message when plugin config parsers raise an error. ([\#8492](https://github.com/matrix-org/synapse/issues/8492))
- Remove the deprecated `Handlers` object. ([\#8494](https://github.com/matrix-org/synapse/issues/8494))
- Fix a threadsafety bug in unit tests. ([\#8497](https://github.com/matrix-org/synapse/issues/8497))
- Add user agent to user_daily_visits table. ([\#8503](https://github.com/matrix-org/synapse/issues/8503))
- Add type hints to various parts of the code base. ([\#8407](https://github.com/matrix-org/synapse/issues/8407), [\#8505](https://github.com/matrix-org/synapse/issues/8505), [\#8507](https://github.com/matrix-org/synapse/issues/8507), [\#8547](https://github.com/matrix-org/synapse/issues/8547), [\#8562](https://github.com/matrix-org/synapse/issues/8562), [\#8609](https://github.com/matrix-org/synapse/issues/8609))
- Remove unused code from the test framework. ([\#8514](https://github.com/matrix-org/synapse/issues/8514))
- Apply some internal fixes to the `HomeServer` class to make its code more idiomatic and statically-verifiable. ([\#8515](https://github.com/matrix-org/synapse/issues/8515))
- Factor out common code between `RoomMemberHandler._locally_reject_invite` and `EventCreationHandler.create_event`. ([\#8537](https://github.com/matrix-org/synapse/issues/8537))
- Improve database performance by executing more queries without starting transactions. ([\#8542](https://github.com/matrix-org/synapse/issues/8542))
- Rename `Cache` to `DeferredCache`, to better reflect its purpose. ([\#8548](https://github.com/matrix-org/synapse/issues/8548))
- Move metric registration code down into `LruCache`. ([\#8561](https://github.com/matrix-org/synapse/issues/8561), [\#8591](https://github.com/matrix-org/synapse/issues/8591))
- Replace `DeferredCache` with the lighter-weight `LruCache` where possible. ([\#8563](https://github.com/matrix-org/synapse/issues/8563))
- Add virtualenv-generated folders to `.gitignore`. ([\#8566](https://github.com/matrix-org/synapse/issues/8566))
- Add `get_immediate` method to `DeferredCache`. ([\#8568](https://github.com/matrix-org/synapse/issues/8568))
- Fix mypy not properly checking across the codebase, additionally, fix a typing assertion error in `handlers/auth.py`. ([\#8569](https://github.com/matrix-org/synapse/issues/8569))
- Fix `synmark` benchmark runner. ([\#8571](https://github.com/matrix-org/synapse/issues/8571))
- Modify `DeferredCache.get()` to return `Deferred`s instead of `ObservableDeferred`s. ([\#8572](https://github.com/matrix-org/synapse/issues/8572))
- Adjust a protocol-type definition to fit `sqlite3` assertions. ([\#8577](https://github.com/matrix-org/synapse/issues/8577))
- Support macOS on the `synmark` benchmark runner. ([\#8578](https://github.com/matrix-org/synapse/issues/8578))
- Update `mypy` static type checker to 0.790. ([\#8583](https://github.com/matrix-org/synapse/issues/8583), [\#8600](https://github.com/matrix-org/synapse/issues/8600))
- Re-organize the structured logging code to separate the TCP transport handling from the JSON formatting. ([\#8587](https://github.com/matrix-org/synapse/issues/8587))
- Remove extraneous unittest logging decorators from unit tests. ([\#8592](https://github.com/matrix-org/synapse/issues/8592))
- Minor optimisations in caching code. ([\#8593](https://github.com/matrix-org/synapse/issues/8593), [\#8594](https://github.com/matrix-org/synapse/issues/8594))
|
| | | |
|
| | |
| |
| |
| | |
The handling of OPTIONS requests was consolidated in #7534, but the endpoint
specific handlers were not removed.
|
| | | |
|
| |/ |
|
| |
|
| |
don't bother constricting a CacheContext unless we need one.
|
| | |
|
| | |
|
| |\
| |
| | |
Push some deferred wrangling down into DeferredCache
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Limit AS transactions to 100 events
* Update changelog.d/8606.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Add tests
* Update synapse/appservice/scheduler.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| | |
| |
| |
| | |
This should (theoretically) allow for using the TCP code with a different output type
and make it easier to use the JSON code with files / console.
|
| |/ |
|
| | |
|
| |
|
|
|
|
|
|
|
| |
* Move schema file
* Add a .
* Add matching changelog entry
* Fix sqlite
|
| |
|
| |
We need to make sure we are readu for the `set_cache_factor` callback.
|
| |
|
| |
Signed-off-by: Vasilis Gerakaris <vasilis.gerakaris@navarino.gr>
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
| |
* Add `DeferredCache.get_immediate` method
A bunch of things that are currently calling `DeferredCache.get` are only
really interested in the result if it's completed. We can optimise and simplify
this case.
* Remove unused 'default' parameter to DeferredCache.get()
* another get_immediate instance
|
| |
|
|
| |
content (#8545)
|
| |
|
|
|
|
| |
This should reduce the number of `There was no active span` errors we
see.
Fixes #8510.
|
| |
|
| |
Most of these uses don't need a full-blown DeferredCache; LruCache is lighter and more appropriate.
|
| |
|
|
|
| |
(#8577)
Fix the Connection protocol according to typeshed's assertions about sqlite3.Connection
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* type annotations for LruCache
* changelog
* Apply suggestions from code review
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* review comments
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | | |
|
| | |
| |
| | |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | | |
|
| |/ |
|
| |
|
|
|
| |
rather than have everything that instantiates an LruCache manage metrics
separately, have LruCache do it itself.
|
| |
|
| |
EventBuilder.build wants auth events these days
|
| |\
| |
| | |
Support modifying event content from ThirdPartyRules modules
|
| | | |
|
| | |
| |
| |
| | |
Support returning a new event dict from `check_event_allowed`.
|
| | |
| |
| |
| |
| | |
Rather than waiting until we handle the event, call the ThirdPartyRules check
when we fist create the event.
|
| | |
| |
| |
| |
| | |
There's not much point in calling these *after* we have decided to accept them
into the DAG.
|
| | |
| |
| |
| |
| |
| | |
This implements a more standard API for instantiating a homeserver and
moves some of the dependency injection into the test suite.
More concretely this stops using `setattr` on all `kwargs` passed to `HomeServer`.
|
| | |
| |
| | |
Optionally sends typing, presence, and read receipt information to appservices.
|
| |\ \ |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
We asserted that the IDs returned by postgres sequence was greater than
any we had seen, however this is technically racey as we may update the
current positions out of order.
We now assert that the sequences are correct on startup, so the
assertion is no longer really required, so we remove them.
|
| | | |
| | |
| | | |
This seemed to entail dragging in a type stub for SortedList.
|
| |\ \ \
| | | |
| | | | |
Rename Cache to DeferredCache, and related changes
|
| | | | | |
|
| | | | | |
|
| | | |/
| |/| |
|
| | | |
| | |
| | | |
Include user agent in user daily visits table.
|
| |\ \ \
| | | |
| | | | |
Simplify `_locally_reject_invite`
|
| | | | |
| | | |
| | | |
| | | |
| | | | |
Update `EventCreationHandler.create_event` to accept an auth_events param, and
use it in `_locally_reject_invite` instead of reinventing the wheel.
|
| | |/ /
| | |
| | |
| | | |
this is always the same as requester.access_token_id.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Autocommit means that we don't wrap the functions in transactions, and instead get executed directly. Introduced in #8456. This will help:
1. reduce the number of `could not serialize access due to concurrent delete` errors that we see (though there are a few functions that often cause serialization errors that we don't fix here);
2. improve the DB performance, as it no longer needs to deal with the overhead of `REPEATABLE READ` isolation levels; and
3. improve wall clock speed of these functions, as we no longer need to send `BEGIN` and `COMMIT` to the DB.
Some notes about the differences between autocommit mode and our default `REPEATABLE READ` transactions:
1. Currently `autocommit` only applies when using PostgreSQL, and is ignored when using SQLite (due to silliness with [Twisted DB classes](https://twistedmatrix.com/trac/ticket/9998)).
2. Autocommit functions may get retried on error, which means they can get applied *twice* (or more) to the DB (since they are not in a transaction the previous call would not get rolled back). This means that the functions need to be idempotent (or otherwise not care about being called multiple times). Read queries, simple deletes, and updates/upserts that replace rows (rather than generating new values from existing rows) are all idempotent.
3. Autocommit functions no longer get executed in [`REPEATABLE READ`](https://www.postgresql.org/docs/current/transaction-iso.html) isolation level, and so data can change queries, which is fine for single statement queries.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
We asserted that the IDs returned by postgres sequence was greater than
any we had seen, however this is technically racey as we may update the
current positions out of order.
We now assert that the sequences are correct on startup, so the
assertion is no longer really required, so we remove them.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
(#8536)
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
|
| | | |
| | |
| | |
| | |
| | | |
* Make sure a retention policy is a state event
* Changelog
|
| |/ /
| |
| | |
Fixes #8029
|
| | | |
|
| | |
| |
| |
| |
| | |
(#8476)
Should fix #3365.
|
| |\|
| |
| |
| |
| |
| | |
* master:
1.21.1
Explicitly install test dependencies when building deb packages (#8523)
|
| | | |
|
| |\| |
|
| | | |
|
| | |
| |
| |
| |
| | |
Currently background proccesses stream the events stream use the "minimum persisted position" (i.e. `get_current_token()`) rather than the vector clock style tokens. This is broadly fine as it doesn't matter if the background processes lag a small amount. However, in extreme cases (i.e. SyTests) where we only write to one event persister the background processes will never make progress.
This PR changes it so that the `MultiWriterIDGenerator` keeps the current position of a given instance as up to date as possible (i.e using the latest token it sees if its not in the process of persisting anything), and then periodically announces that over replication. This then allows the "minimum persisted position" to advance, albeit with a small lag.
|
| | |
| |
| | |
Signed-off-by: Mateusz Przybyłowicz <uamfhq@gmail.com>
|
| | | |
|
| | |
| |
| |
| |
| | |
This PR allows Synapse modules making use of the `ModuleApi` to create and send non-membership events into a room. This can useful to have modules send messages, or change power levels in a room etc. Note that they must send event through a user that's already in the room.
The non-membership event limitation is currently arbitrary, as it's another chunk of work and not necessary at the moment.
|
| | |
| |
| |
| |
| | |
When pulling events out of the DB to send over replication we were not
filtering by instance name, and so we were sending events for other
instances.
|
| | | |
|
| | |
| |
| | |
All handlers now available via get_*_handler() methods on the HomeServer.
|
| | | |
|
| | | |
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.21.0rc3 (2020-10-08)
==============================
Bugfixes
--------
- Fix duplication of events on high traffic servers, caused by PostgreSQL `could not serialize access due to concurrent update` errors. ([\#8456](https://github.com/matrix-org/synapse/issues/8456))
Internal Changes
----------------
- Add Groovy Gorilla to the list of distributions we build `.deb`s for. ([\#8475](https://github.com/matrix-org/synapse/issues/8475))
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
This turns:
Failed to parse config for 'myplugin': Exception('error message')
into:
Failed to parse config for 'myplugin': error message.
|
| | | |
|
| | |
| |
| | |
By reporting the log level of the synapse logger as a string.
|
| | |
| |
| |
| |
| |
| | |
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Currently when using multiple event persisters we (in the worst case) don't tell clients about events until all event persisters have persisted new events after the original event. This is a suboptimal, especially if one of the event persisters goes down.
To handle this, we encode the position of each event persister in the room tokens so that we can send events to clients immediately. To reduce the size of the token we do two things:
1. We create a unique immutable persistent mapping between instance names and a generated small integer ID, which we can encode in the tokens instead of the instance name; and
2. We encode the "persisted upto position" of the room token and then only explicitly include instances that have positions strictly greater than that.
The new tokens look something like: `m3478~1.3488~2.3489`, where the first number is the min position, and the subsequent `-` separated pairs are the instance ID to positions map. (We use `.` and `~` as separators as they're URL safe and not already used by `StreamToken`).
|
| | | |
|
| | | |
|
| | |
| |
| |
| | |
This allows a user to store an offline device on the server and
then restore it at a subsequent login.
|
| |\ \
| | |
| | | |
Reduce inconsistencies between codepaths for membership and non-membership events.
|
| | | | |
|
| | | |
| | |
| | |
| | | |
This is now redundant, and we can just call `handle_new_client_event` directly.
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | | |
move the "duplicate state event" handling down into `handle_new_client_event`
where it can be shared between multiple call paths.
|
| | | |
| | |
| | |
| | |
| | | |
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* Optimise and test state fetching for 3p event rules
Getting all the events at once is much more efficient than getting them
individually
* Test that 3p event rules can modify events
|
| |\ \ \
| | | |
| | | | |
Fix third-party event modules for `check_visibility_can_be_modified` check
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
PR #8292 tried to maintain backwards compat with modules which don't provide a
`check_visibility_can_be_modified` method, but the tests weren't being run,
and the check didn't work.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
(#8465)
This PR ports the quick fix from https://github.com/matrix-org/synapse/pull/2796 to further methods which handle media, URL preview and `/key/v2/server` requests. This prevents a harmless `ERROR` that comes up in the logs when we were unable to respond to a client request when the client had already disconnected. In this case we simply bail out if the client has already done so.
This is the 'simple fix' as suggested by https://github.com/matrix-org/synapse/issues/5304#issuecomment-574740003.
Fixes https://github.com/matrix-org/synapse/issues/6700
Fixes https://github.com/matrix-org/synapse/issues/5304
|
| |/ / /
| | |
| | |
| | | |
Per https://github.com/matrix-org/matrix-doc/pull/2788
|
| |/ /
| |
| | |
This fixes a bug when backfilling invalid events.
|
| | |
| |
| |
| |
| | |
This PR allows `ThirdPartyEventRules` modules to view, manipulate and block changes to the state of whether a room is published in the public rooms directory.
While the idea of whether a room is in the public rooms list is not kept within an event in the room, `ThirdPartyEventRules` generally deal with controlling which modifications can happen to a room. Public rooms fits within that idea, even if its toggle state isn't controlled through a state event.
|
| | |
| |
| |
| |
| |
| |
| |
| | |
There's no need for it to be in the dict as well as the events table. Instead,
we store it in a separate attribute in the EventInternalMetadata object, and
populate that on load.
This means that we can rely on it being correctly populated for any event which
has been persited to the database.
|
| | |
| |
| |
| | |
This fixes a bug where `m.ignored_user_list` was assumed to be a dict,
leading to odd behavior for users who set it to something else.
|
| | |
| |
| |
| |
| | |
This is so we can tell what is going on when things are taking a while to start up.
The main change here is to ensure that transactions that are created during startup get correctly logged like normal transactions.
|
| | | |
|
| | | |
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.21.0rc2 (2020-10-02)
==============================
Features
--------
- Convert additional templates from inline HTML to Jinja2 templates. ([\#8444](https://github.com/matrix-org/synapse/issues/8444))
Bugfixes
--------
- Fix a regression in v1.21.0rc1 which broke thumbnails of remote media. ([\#8438](https://github.com/matrix-org/synapse/issues/8438))
- Do not expose the experimental `uk.half-shot.msc2778.login.application_service` flow in the login API, which caused a compatibility problem with Element iOS. ([\#8440](https://github.com/matrix-org/synapse/issues/8440))
- Fix malformed log line in new federation "catch up" logic. ([\#8442](https://github.com/matrix-org/synapse/issues/8442))
- Fix DB query on startup for negative streams which caused long start up times. Introduced in [\#8374](https://github.com/matrix-org/synapse/issues/8374). ([\#8447](https://github.com/matrix-org/synapse/issues/8447))
|
| | | |
|
| | |
| |
| |
| |
| | |
#7124 changed the behaviour of remote thumbnails so that the thumbnailing method was included in the filename of the thumbnail. To support existing files, it included a fallback so that we would check the old filename if the new filename didn't exist.
Unfortunately, it didn't apply this logic to storage providers, so any thumbnails stored on such a storage provider was broken.
|
| | |
| |
| |
| |
| |
| |
| |
| | |
For negative streams we have to negate the internal stream ID before
querying the DB.
The effect of this bug was to query far too many rows, slowing start up
time, but we would correctly filter the results afterwards so there was
no ill effect.
|
| | |
| |
| | |
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| | |
This allows for connecting to certain IdPs, e.g. GitLab.
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.21.0rc1 (2020-10-01)
==============================
Features
--------
- Require the user to confirm that their password should be reset after clicking the email confirmation link. ([\#8004](https://github.com/matrix-org/synapse/issues/8004))
- Add an admin API `GET /_synapse/admin/v1/event_reports` to read entries of table `event_reports`. Contributed by @dklimpel. ([\#8217](https://github.com/matrix-org/synapse/issues/8217))
- Consolidate the SSO error template across all configuration. ([\#8248](https://github.com/matrix-org/synapse/issues/8248), [\#8405](https://github.com/matrix-org/synapse/issues/8405))
- Add a configuration option to specify a whitelist of domains that a user can be redirected to after validating their email or phone number. ([\#8275](https://github.com/matrix-org/synapse/issues/8275), [\#8417](https://github.com/matrix-org/synapse/issues/8417))
- Add experimental support for sharding event persister. ([\#8294](https://github.com/matrix-org/synapse/issues/8294), [\#8387](https://github.com/matrix-org/synapse/issues/8387), [\#8396](https://github.com/matrix-org/synapse/issues/8396), [\#8419](https://github.com/matrix-org/synapse/issues/8419))
- Add the room topic and avatar to the room details admin API. ([\#8305](https://github.com/matrix-org/synapse/issues/8305))
- Add an admin API for querying rooms where a user is a member. Contributed by @dklimpel. ([\#8306](https://github.com/matrix-org/synapse/issues/8306))
- Add `uk.half-shot.msc2778.login.application_service` login type to allow appservices to login. ([\#8320](https://github.com/matrix-org/synapse/issues/8320))
- Add a configuration option that allows existing users to log in with OpenID Connect. Contributed by @BBBSnowball and @OmmyZhang. ([\#8345](https://github.com/matrix-org/synapse/issues/8345))
- Add prometheus metrics for replication requests. ([\#8406](https://github.com/matrix-org/synapse/issues/8406))
- Support passing additional single sign-on parameters to the client. ([\#8413](https://github.com/matrix-org/synapse/issues/8413))
- Add experimental reporting of metrics on expensive rooms for state-resolution. ([\#8420](https://github.com/matrix-org/synapse/issues/8420))
- Add experimental prometheus metric to track numbers of "large" rooms for state resolutiom. ([\#8425](https://github.com/matrix-org/synapse/issues/8425))
- Add prometheus metrics to track federation delays. ([\#8430](https://github.com/matrix-org/synapse/issues/8430))
Bugfixes
--------
- Fix a bug in the media repository where remote thumbnails with the same size but different crop methods would overwrite each other. Contributed by @deepbluev7. ([\#7124](https://github.com/matrix-org/synapse/issues/7124))
- Fix inconsistent handling of non-existent push rules, and stop tracking the `enabled` state of removed push rules. ([\#7796](https://github.com/matrix-org/synapse/issues/7796))
- Fix a longstanding bug when storing a media file with an empty `upload_name`. ([\#7905](https://github.com/matrix-org/synapse/issues/7905))
- Fix messages not being sent over federation until an event is sent into the same room. ([\#8230](https://github.com/matrix-org/synapse/issues/8230), [\#8247](https://github.com/matrix-org/synapse/issues/8247), [\#8258](https://github.com/matrix-org/synapse/issues/8258), [\#8272](https://github.com/matrix-org/synapse/issues/8272), [\#8322](https://github.com/matrix-org/synapse/issues/8322))
- Fix a longstanding bug where files that could not be thumbnailed would result in an Internal Server Error. ([\#8236](https://github.com/matrix-org/synapse/issues/8236), [\#8435](https://github.com/matrix-org/synapse/issues/8435))
- Upgrade minimum version of `canonicaljson` to version 1.4.0, to fix an unicode encoding issue. ([\#8262](https://github.com/matrix-org/synapse/issues/8262))
- Fix longstanding bug which could lead to incomplete database upgrades on SQLite. ([\#8265](https://github.com/matrix-org/synapse/issues/8265))
- Fix stack overflow when stderr is redirected to the logging system, and the logging system encounters an error. ([\#8268](https://github.com/matrix-org/synapse/issues/8268))
- Fix a bug which cause the logging system to report errors, if `DEBUG` was enabled and no `context` filter was applied. ([\#8278](https://github.com/matrix-org/synapse/issues/8278))
- Fix edge case where push could get delayed for a user until a later event was pushed. ([\#8287](https://github.com/matrix-org/synapse/issues/8287))
- Fix fetching malformed events from remote servers. ([\#8324](https://github.com/matrix-org/synapse/issues/8324))
- Fix `UnboundLocalError` from occuring when appservices send a malformed register request. ([\#8329](https://github.com/matrix-org/synapse/issues/8329))
- Don't send push notifications to expired user accounts. ([\#8353](https://github.com/matrix-org/synapse/issues/8353))
- Fix a regression in v1.19.0 with reactivating users through the admin API. ([\#8362](https://github.com/matrix-org/synapse/issues/8362))
- Fix a bug where during device registration the length of the device name wasn't limited. ([\#8364](https://github.com/matrix-org/synapse/issues/8364))
- Include `guest_access` in the fields that are checked for null bytes when updating `room_stats_state`. Broke in v1.7.2. ([\#8373](https://github.com/matrix-org/synapse/issues/8373))
- Fix theoretical race condition where events are not sent down `/sync` if the synchrotron worker is restarted without restarting other workers. ([\#8374](https://github.com/matrix-org/synapse/issues/8374))
- Fix a bug which could cause errors in rooms with malformed membership events, on servers using sqlite. ([\#8385](https://github.com/matrix-org/synapse/issues/8385))
- Fix "Re-starting finished log context" warning when receiving an event we already had over federation. ([\#8398](https://github.com/matrix-org/synapse/issues/8398))
- Fix incorrect handling of timeouts on outgoing HTTP requests. ([\#8400](https://github.com/matrix-org/synapse/issues/8400))
- Fix a regression in v1.20.0 in the `synapse_port_db` script regarding the `ui_auth_sessions_ips` table. ([\#8410](https://github.com/matrix-org/synapse/issues/8410))
- Remove unnecessary 3PID registration check when resetting password via an email address. Bug introduced in v0.34.0rc2. ([\#8414](https://github.com/matrix-org/synapse/issues/8414))
Improved Documentation
----------------------
- Add `/_synapse/client` to the reverse proxy documentation. ([\#8227](https://github.com/matrix-org/synapse/issues/8227))
- Add note to the reverse proxy settings documentation about disabling Apache's mod_security2. Contributed by Julian Fietkau (@jfietkau). ([\#8375](https://github.com/matrix-org/synapse/issues/8375))
- Improve description of `server_name` config option in `homserver.yaml`. ([\#8415](https://github.com/matrix-org/synapse/issues/8415))
Deprecations and Removals
-------------------------
- Drop support for `prometheus_client` older than 0.4.0. ([\#8426](https://github.com/matrix-org/synapse/issues/8426))
Internal Changes
----------------
- Fix tests on distros which disable TLSv1.0. Contributed by @danc86. ([\#8208](https://github.com/matrix-org/synapse/issues/8208))
- Simplify the distributor code to avoid unnecessary work. ([\#8216](https://github.com/matrix-org/synapse/issues/8216))
- Remove the `populate_stats_process_rooms_2` background job and restore functionality to `populate_stats_process_rooms`. ([\#8243](https://github.com/matrix-org/synapse/issues/8243))
- Clean up type hints for `PaginationConfig`. ([\#8250](https://github.com/matrix-org/synapse/issues/8250), [\#8282](https://github.com/matrix-org/synapse/issues/8282))
- Track the latest event for every destination and room for catch-up after federation outage. ([\#8256](https://github.com/matrix-org/synapse/issues/8256))
- Fix non-user visible bug in implementation of `MultiWriterIdGenerator.get_current_token_for_writer`. ([\#8257](https://github.com/matrix-org/synapse/issues/8257))
- Switch to the JSON implementation from the standard library. ([\#8259](https://github.com/matrix-org/synapse/issues/8259))
- Add type hints to `synapse.util.async_helpers`. ([\#8260](https://github.com/matrix-org/synapse/issues/8260))
- Simplify tests that mock asynchronous functions. ([\#8261](https://github.com/matrix-org/synapse/issues/8261))
- Add type hints to `StreamToken` and `RoomStreamToken` classes. ([\#8279](https://github.com/matrix-org/synapse/issues/8279))
- Change `StreamToken.room_key` to be a `RoomStreamToken` instance. ([\#8281](https://github.com/matrix-org/synapse/issues/8281))
- Refactor notifier code to correctly use the max event stream position. ([\#8288](https://github.com/matrix-org/synapse/issues/8288))
- Use slotted classes where possible. ([\#8296](https://github.com/matrix-org/synapse/issues/8296))
- Support testing the local Synapse checkout against the [Complement homeserver test suite](https://github.com/matrix-org/complement/). ([\#8317](https://github.com/matrix-org/synapse/issues/8317))
- Update outdated usages of `metaclass` to python 3 syntax. ([\#8326](https://github.com/matrix-org/synapse/issues/8326))
- Move lint-related dependencies to package-extra field, update CONTRIBUTING.md to utilise this. ([\#8330](https://github.com/matrix-org/synapse/issues/8330), [\#8377](https://github.com/matrix-org/synapse/issues/8377))
- Use the `admin_patterns` helper in additional locations. ([\#8331](https://github.com/matrix-org/synapse/issues/8331))
- Fix test logging to allow braces in log output. ([\#8335](https://github.com/matrix-org/synapse/issues/8335))
- Remove `__future__` imports related to Python 2 compatibility. ([\#8337](https://github.com/matrix-org/synapse/issues/8337))
- Simplify `super()` calls to Python 3 syntax. ([\#8344](https://github.com/matrix-org/synapse/issues/8344))
- Fix bad merge from `release-v1.20.0` branch to `develop`. ([\#8354](https://github.com/matrix-org/synapse/issues/8354))
- Factor out a `_send_dummy_event_for_room` method. ([\#8370](https://github.com/matrix-org/synapse/issues/8370))
- Improve logging of state resolution. ([\#8371](https://github.com/matrix-org/synapse/issues/8371))
- Add type annotations to `SimpleHttpClient`. ([\#8372](https://github.com/matrix-org/synapse/issues/8372))
- Refactor ID generators to use `async with` syntax. ([\#8383](https://github.com/matrix-org/synapse/issues/8383))
- Add `EventStreamPosition` type. ([\#8388](https://github.com/matrix-org/synapse/issues/8388))
- Create a mechanism for marking tests "logcontext clean". ([\#8399](https://github.com/matrix-org/synapse/issues/8399))
- A pair of tiny cleanups in the federation request code. ([\#8401](https://github.com/matrix-org/synapse/issues/8401))
- Add checks on startup that PostgreSQL sequences are consistent with their associated tables. ([\#8402](https://github.com/matrix-org/synapse/issues/8402))
- Do not include appservice users when calculating the total MAU for a server. ([\#8404](https://github.com/matrix-org/synapse/issues/8404))
- Typing fixes for `synapse.handlers.federation`. ([\#8422](https://github.com/matrix-org/synapse/issues/8422))
- Various refactors to simplify stream token handling. ([\#8423](https://github.com/matrix-org/synapse/issues/8423))
- Make stream token serializing/deserializing async. ([\#8427](https://github.com/matrix-org/synapse/issues/8427))
|
| | |
| |
| | |
Introduced in #8236
|
| | |
| |
| |
| | |
we're not doing a final release yet!
|
| | | |
|
| |/ |
|
| |
|
|
|
| |
Add a pair of federation metrics to track the delays in sending PDUs to/from
particular servers.
|
| |
|
| |
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
|
| |\
| |
| | |
Add an improved "forward extremities" metric
|
| | |
| |
| |
| |
| | |
Hopefully, N(extremities) * N(state_events) is a more realistic approximation
to "how big a problem is this room?".
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This was a bit unweildy for what I wanted: in particular, I wanted to assign
each measurement straight into a bucket, rather than storing an intermediate
Counter which didn't do any bucketing at all.
I've replaced it with something that is hopefully a bit easier to use.
(I'm not entirely sure what the difference between a HistogramMetricFamily and
a GaugeHistogramMetricFamily is, but given our counters can go down as well as
up the latter *sounds* more accurate?)
|
| | |
| |
| |
| |
| |
| | |
Our hacked-up `_exposition.py` was stripping out some samples it shouldn't
have been. Put them back in, to more closely match the upstream
`exposition.py`.
|
| |/ |
|
| |
|
|
| |
Drop compatibility hacks for prometheus-client pre 0.4.0. Debian stretch and
Fedora 31 both have newer versions, so hopefully this will be ok.
|
| |\
| |
| | |
Report metrics on expensive rooms for state res
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| |/ |
|
| | |
|
| |\
| |
| |
| |
| |
| |
| |
| | |
* Don't check whether a 3pid is allowed to register during password reset
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
* Changelog
|
| | |\
| | |
| | |
| | | |
anoa/info-mainline-no-check-password-reset
|
| | | |
| | |
| | |
| | |
| | | |
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* Fix table scan of events on worker startup.
This happened because we assumed "new" writers had an initial stream
position of 0, so the replication code tried to fetch all events written
by the instance between 0 and the current position.
Instead, set the initial position of new writers to the current
persisted up to position, on the assumption that new writers won't have
written anything before that point.
* Consider old writers coming back as "new".
Otherwise we'd try and fetch entries between the old stale token and the
current position, even though it won't have written any rows.
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| | |/
|/|
| | |
For some reason, an apparently unrelated PR upset mypy about this module. Here are a number of little fixes.
|
| | |
| |
| | |
This is an attempt to fix #8403.
|
| | |
| |
| |
| |
| |
| |
| | |
Broken in https://github.com/matrix-org/synapse/pull/8275 and has yet to be put in a release. Fixes https://github.com/matrix-org/synapse/issues/8418.
`next_link` is an optional parameter. However, we were checking whether the `next_link` param was valid, even if it wasn't provided. In that case, `next_link` was `None`, which would clearly not be a valid URL.
This would prevent password reset and other operations if `next_link` was not provided, and the `next_link_domain_whitelist` config option was set.
|
| | |
| |
| | |
One hope is that this might provide some insights into #3365.
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Remove `on_timeout_cancel` from `timeout_deferred`
The `on_timeout_cancel` param to `timeout_deferred` wasn't always called on a
timeout (in particular if the canceller raised an exception), so it was
unreliable. It was also only used in one place, and to be honest it's easier to
do what it does a different way.
* Fix handling of connection timeouts in outgoing http requests
Turns out that if we get a timeout during connection, then a different
exception is raised, which wasn't always handled correctly.
To fix it, catch the exception in SimpleHttpClient and turn it into a
RequestTimedOutError (which is already a documented exception).
Also add a description to RequestTimedOutError so that we can see which stage
it failed at.
* Fix incorrect handling of timeouts reading federation responses
This was trapping the wrong sort of TimeoutError, so was never being hit.
The effect was relatively minor, but we should fix this so that it does the
expected thing.
* Fix inconsistent handling of `timeout` param between methods
`get_json`, `put_json` and `delete_json` were applying a different timeout to
the response body to `post_json`; bring them in line and test.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Fix test_verify_json_objects_for_server_awaits_previous_requests
It turns out that this wasn't really testing what it thought it was testing
(in particular, `check_context` was turning failures into success, which was
making the tests pass even though it wasn't clear they should have been.
It was also somewhat overcomplex - we can test what it was trying to test
without mocking out perspectives servers.
* Fix warnings about finished logcontexts in the keyring
We need to make sure that we finish the key fetching magic before we run the
verifying code, to ensure that we don't mess up our logcontexts.
|
| |
|
|
|
|
|
| |
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
|
| |
|
|
|
| |
Fixes #8395.
|
| |\ |
|
| | | |
|
| | |
| |
| |
| |
| | |
#8037 changed the default `autoescape` option when rendering Jinja2 templates from `False` to `True`. This caused some bugs, noticeably around redirect URLs being escaped in SAML2 auth confirmation templates, causing those URLs to break for users.
This change returns the previous behaviour as it stood. We may want to look at each template individually and see whether autoescaping is a good idea at some point, but for now lets just fix the breakage.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
On startup `MultiWriteIdGenerator` fetches the maximum stream ID for
each instance from the table and uses that as its initial "current
position" for each writer. This is problematic as a) it involves either
a scan of events table or an index (neither of which is ideal), and b)
if rows are being persisted out of order elsewhere while the process
restarts then using the maximum stream ID is not correct. This could
theoretically lead to race conditions where e.g. events that are
persisted out of order are not sent down sync streams.
We fix this by creating a new table that tracks the current positions of
each writer to the stream, and update it each time we finish persisting
a new entry. This is a relatively small overhead when persisting events.
However for the cache invalidation stream this is a much bigger relative
overhead, so instead we note that for invalidation we don't actually
care about reliability over restarts (as there's no caches to
invalidate) and simply don't bother reading and writing to the new table
in that particular case.
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
|
| | |
| |
| | |
this makes it possible to use from the manhole, and seems cleaner anyway.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
I'd like to get a better insight into what we are doing with respect to state
res. The list of state groups we are resolving across should be short (if it
isn't, that's a massive problem in itself), so it should be fine to log it in
ite entiretly.
I've done some grepping and found approximately zero cases in which the
"shortcut" code delivered the result, so I've ripped that out too.
|
| | | |
|
| | |
| |
| | |
This will allow us to hit the DB after we've finished using the generated stream ID.
|
| | | |
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | | |
When updating the `room_stats_state` table, we try to check for null bytes slipping in to the content for state events. It turns out we had added `guest_access` as a field to room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a `m.room.guest_access` event then breaks `room_stats_state` updates.
This PR adds the check for `guest_access`.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When updating room_stats_state, we try to check for null bytes slipping
in to the
content for state events. It turns out we had added guest_access as a
field to
room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a m.room.guest_access event then breaks
room_stats_state
updates.
This PR adds the check for guest_access. A further PR will improve this
function so that this hopefully does not happen again in future.
|
| |/ /
| |
| | |
moves non-runtime dependencies out of synapse.python_dependencies (test and lint)
|
| | |
| |
| |
| |
| |
| |
| | |
Fixes: #8359
Trying to reactivate a user with the admin API (`PUT /_synapse/admin/v2/users/<user_name>`) causes an internal server error.
Seems to be a regression in #8033.
|
| | |
| |
| | |
Add an admin API to read entries of table `event_reports`. API: `GET /_synapse/admin/v1/event_reports`
|
| |\| |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
|
| | | |
|
| | | |
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.20.0rc5 (2020-09-18)
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
|
| | | |
|
| | |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
1.19.3
Synapse 1.19.3 (2020-09-18)
===========================
Bugfixes
--------
- Partially mitigate bug where newly joined servers couldn't get past
events in a room when there is a malformed event.
([\#8350](https://github.com/matrix-org/synapse/issues/8350))
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This is a bit of a hack, as `_check_sigs_and_hash_and_fetch` is intended
for attempting to pull an event from the database/(re)pull it from the
server that originally sent the event if checking the signature of the
event fails.
During backfill we *know* that we won't have the event in our database,
however it is still useful to be able to query the original sending
server as the server we're backfilling from may be acting maliciously.
The main benefit and reason for this change however is that
`_check_sigs_and_hash_and_fetch` will drop an event during backfill if
it cannot be successfully validated, whereas the current code will
simply fail the backfill request - resulting in the client's /messages
request silently being dropped.
This is a quick patch to fix backfilling rooms that contain malformed
events. A better implementation in planned in future.
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Instead of just using the most recent extremities let's pick the
ones that will give us results that the pagination request cares about,
i.e. pick extremities only if they have a smaller depth than the
pagination token.
This is useful when we fail to backfill an extremity, as we no longer
get stuck requesting that same extremity repeatedly.
|
| | | | |
|
| | | |
| | |
| | |
| | | |
Add a new admin API `GET /_synapse/admin/v1/users/<user_id>/joined_rooms` to
list all rooms where a user is a member.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Fix _set_destination_retry_timings
This came about because the code assumed that retry_interval
could not be NULL — which has been challenged by catch-up.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
This converts calls like super(Foo, self) -> super().
Generated with:
sed -i "" -Ee 's/super\([^\(]+\)/super()/g' **/*.py
|
| | | |
| | |
| | |
| | |
| | | |
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |\| | |
|
| | | |
| | |
| | | |
c.f. #8295 for rationale
|
| | | |
| | |
| | |
| | |
| | | |
Lint dependencies can now be installed with pip install -e ".[lint]"
This should help keep the version in sync between tox and documentation.
|
