| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Before we were pulling out *all* read receipts for a user for every
event we pushed. Instead let's only pull out the relevant receipts.
This also pulled out the event rows for each receipt, causing load on
the events table.
|
|
Unfortunately, the optimisation we applied here for non-gappy syncs is
not actually valid.
Fixes https://github.com/element-hq/synapse/issues/16941.
~~Based on https://github.com/element-hq/synapse/pull/16930.~~
Requires https://github.com/matrix-org/sytest/pull/1374.
|
|
Fix a long-standing issue which could cause state to be omitted from the
sync response if the last event was filtered out.
Fixes: https://github.com/element-hq/synapse/issues/16928
|
|
This PR fixes a very, very niche edge-case, but I've got some more work
coming which will otherwise make the problem worse.
The bug happens when the syncing user leaves a room, and has a sync
filter which includes "left" rooms, but sets the timeline limit to 0. In
that case, the state returned in the `state` section is calculated
incorrectly.
The fix is to pass a token corresponding to the point that the user
leaves the room through to `compute_state_delta`.
|
|
This was causing sequential scans when using refresh tokens.
|
|
|
|
Since these queries are duplicated in two places.
|
|
Follow on from #17037
|
|
|
|
|
|
|
|
Requests may require a User-Agent header, and the change in #16972
accidentally removed it, resulting in requests getting rejected causing
login to fail.
|
|
|
|
(#16925)
Fixes https://github.com/element-hq/synapse/issues/16680, as well as a
related bug, where servers which we had *never* successfully sent an
event to would not be retried.
In order to fix the case of pending to-device messages, we hook into the
existing `wake_destinations_needing_catchup` process, by extending it to
look for destinations that have pending to-device messages. The
federation transmission loop then attempts to send the pending to-device
messages as normal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When running unit tests, we patch the database connection pool so that
it runs queries "synchronously". This is ok, except that if any queries
are launched before we do the patching, those queries get left in limbo
and never complete.
To fix this, let's change the way we do the switcheroo, by patching out
the method which creates the connection pool in the first place.
|
|
|
|
|
|
|
|
|
|
|
|
when it's already set (#16985)
I have a use case where I'd like the Synapse image to start up a
postgres instance that I can use, but don't want to force Synapse to use
postgres as well.
This commit prevents postgres from being started when it has already
been explicitly enabled elsewhere.
|
|
|
|
As the title states.
|
|
|
|
|
|
|
|
|
|
As done for SAML mapping provider, let's pass the module API to the OIDC
one so the mapper can do more logic in its code.
|
|
This is needed, because the netaddr package removed support for the
implicit prefix form in version 1.0.0:
https://github.com/netaddr/netaddr/pull/360
|
|
State *before* an event is different to state *after* that event, and
people tend to assume the wrong one.
|
|
|
|
Fixes https://github.com/element-hq/synapse/issues/16948. If the `join`
and the `leave` are in the same sync response, we need to count them as
a "left" user.
|
|
This is a huge method, which melts my brain.
This is a non-functional change which lays some groundwork for future
work in this area.
|
|
Fixes #16964
This adds a proper sorter for versions which takes into account semantic
versions, rather than just relying on localeCompare.
|
|
comma splice
"rollback" is a noun
|
|
|
|
When a lot of locks are waiting for a single lock, notifying all locks
independently with `call_later` on each release is really costly and
incurs some kind of async contention, where the CPU is spinning a lot
for not much.
The included test is taking around 30s before the change, and 0.5s
after.
It was found following failing tests with
https://github.com/element-hq/synapse/pull/16827.
|
|
|
|
|
|
Background: we have a `matrixdotorg/synapse-workers` docker image, which
is intended for running multiple workers within the same container. That
image includes a `prefix-log` script which, for each line printed to
stdout or stderr by one of the processes, prepends the name of the
process.
This commit disables buffering in that script, so that lines are logged
quickly after they are printed. This makes it much easier to understand
the output, since they then come out in a natural order.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A new poetry-core version was released. See if CI is happy. Required for
the latest Fedora Synapse package.
|
|
|
|
This PR aims to fix #16895, caused by a regression in #7 and not fixed
by #16903. The PR #16903 only fixes a starvation issue, where the CPU
isn't released. There is a second issue, where the execution is blocked.
This theory is supported by the flame graphs provided in #16895 and the
fact that I see the CPU usage reducing and far below the limit.
Since the changes in #7, the method `check_state_independent_auth_rules`
is called with the additional parameter `batched_auth_events`:
https://github.com/element-hq/synapse/blob/6fa13b4f927c10b5f4e9495be746ec28849f5cb6/synapse/handlers/federation_event.py#L1741-L1743
It makes the execution enter this if clause, introduced with #15195
https://github.com/element-hq/synapse/blob/6fa13b4f927c10b5f4e9495be746ec28849f5cb6/synapse/event_auth.py#L178-L189
There are two issues in the above code snippet.
First, there is the blocking issue. I'm not entirely sure if this is a
deadlock, starvation, or something different. In the beginning, I
thought the copy operation was responsible. It wasn't. Then I
investigated the nested `store.get_events` inside the function `update`.
This was also not causing the blocking issue. Only when I replaced the
set difference operation (`-` ) with a list comprehension, the blocking
was resolved. Creating and comparing sets with a very large amount of
events seems to be problematic.
This is how the flamegraph looks now while persisting outliers. As you
can see, the execution no longer locks up in the above function.
Second, the copying here doesn't serve any purpose, because only a
shallow copy is created. This means the same objects from the original
dict are referenced. This fails the intention of protecting these
objects from mutation. The review of the original PR
https://github.com/matrix-org/synapse/pull/15195 had an extensive
discussion about this matter.
Various approaches to copying the auth_events were attempted:
1) Implementing a deepcopy caused issues due to
builtins.EventInternalMetadata not being pickleable.
2) Creating a dict with new objects akin to a deepcopy.
3) Creating a dict with new objects containing only necessary
attributes.
Concluding, there is no easy way to create an actual copy of the
objects. Opting for a deepcopy can significantly strain memory and CPU
resources, making it an inefficient choice. I don't see why the copy is
necessary in the first place. Therefore I'm proposing to remove it
altogether.
After these changes, I was able to successfully join these rooms,
without the main worker locking up:
- #synapse:matrix.org
- #element-android:matrix.org
- #element-web:matrix.org
- #ecips:matrix.org
- #ipfs-chatter:ipfs.io
- #python:matrix.org
- #matrix:matrix.org
|
|
|
|
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
|
|
|
Since Synapse 1.76.0, any module which registers a `on_new_event`
callback would brick the ability to join remote rooms.
This is because this callback tried to get the full state of the room,
which would end up in a deadlock.
Related:
https://github.com/matrix-org/synapse-auto-accept-invite/issues/18
The following module would brick the ability to join remote rooms:
```python
from typing import Any, Dict, Literal, Union
import logging
from synapse.module_api import ModuleApi, EventBase
logger = logging.getLogger(__name__)
class MyModule:
def __init__(self, config: None, api: ModuleApi):
self._api = api
self._config = config
self._api.register_third_party_rules_callbacks(
on_new_event=self.on_new_event,
)
async def on_new_event(self, event: EventBase, _state_map: Any) -> None:
logger.info(f"Received new event: {event}")
@staticmethod
def parse_config(_config: Dict[str, Any]) -> None:
return None
```
This is technically a breaking change, as we are now passing partial
state on the `on_new_event` callback.
However, this callback was broken for federated rooms since 1.76.0, and
local rooms have full state anyway, so it's unlikely that it would
change anything.
|
|
|
|
|
|
|
|
(#16756)" (#16979)
|
|
Co-authored-by: reivilibre <oliverw@matrix.org>
|
|
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
|
|
|
|
|
|
Co-authored-by: Andrew Morgan <andrew@amorgan.xyz>
|
|
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
|
|
|
Co-authored-by: Andrew Morgan <andrew@amorgan.xyz>
|
|
This adds a counter `synapse_emails_sent_total` for emails sent. They
are broken down by `type`, which are `password_reset`, `registration`,
`add_threepid`, `notification` (matching the methods of `Mailer`).
|
|
We do this by adding support to the LRU cache for "extra indices" based
on the cached value. This allows us to efficiently map from room ID to
the cached events and only invalidate those.
|
|
List of users not to send out device list updates for when they register
new devices. This is useful to handle bot accounts.
This is undocumented as its mostly a hack to test on matrix.org.
Note: This will still send out device list updates if the device is
later updated, e.g. end to end keys are added.
|
|
|
|
|
|
|
|
Bumps [bcrypt](https://github.com/pyca/bcrypt) from 4.0.1 to 4.1.2.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/pyca/bcrypt/commit/b9223e61e2aec6f2d4841e3fa1f8e5d1ab7e4b61"><code>b9223e6</code></a>
Try building py39 wheels to see if that helps with reinitialization
errors (#...</li>
<li><a
href="https://github.com/pyca/bcrypt/commit/504978344416eb7128142e0fa40cc2d472c194e5"><code>5049783</code></a>
Bump syn from 2.0.40 to 2.0.41 in /src/_bcrypt (<a
href="https://redirect.github.com/pyca/bcrypt/issues/696">#696</a>)</li>
<li><a
href="https://github.com/pyca/bcrypt/commit/642d0709725fd1d376a72868042ff756e53e5ebf"><code>642d070</code></a>
Bump syn from 2.0.39 to 2.0.40 in /src/_bcrypt (<a
href="https://redirect.github.com/pyca/bcrypt/issues/693">#693</a>)</li>
<li><a
href="https://github.com/pyca/bcrypt/commit/8b44a1046a23499f9f8e91a4b2c375fecb511fa2"><code>8b44a10</code></a>
Bump libc from 0.2.150 to 0.2.151 in /src/_bcrypt (<a
href="https://redirect.github.com/pyca/bcrypt/issues/692">#692</a>)</li>
<li><a
href="https://github.com/pyca/bcrypt/commit/951cc64d0cb7df2345a6c1bf0c983645a8020e9f"><code>951cc64</code></a>
Bump once_cell from 1.18.0 to 1.19.0 in /src/_bcrypt (<a
href="https://redirect.github.com/pyca/bcrypt/issues/690">#690</a>)</li>
<li><a
href="https://github.com/pyca/bcrypt/commit/7377c6db3a51ade1c330b27d7eccf3a02b2b9a90"><code>7377c6d</code></a>
Bump actions/setup-python from 4.8.0 to 5.0.0 (<a
href="https://redirect.github.com/pyca/bcrypt/issues/689">#689</a>)</li>
<li><a
href="https://github.com/pyca/bcrypt/commit/61b32039d4cd657dd25d9f32bea15b066880e2a6"><code>61b3203</code></a>
Bump actions/setup-python from 4.7.1 to 4.8.0 (<a
href="https://redirect.github.com/pyca/bcrypt/issues/688">#688</a>)</li>
<li><a
href="https://github.com/pyca/bcrypt/commit/1c3159a28a88a2755149e73dfd1334a2b571c3f5"><code>1c3159a</code></a>
Fixed wheels for older versions of macOS (<a
href="https://redirect.github.com/pyca/bcrypt/issues/687">#687</a>)</li>
<li><a
href="https://github.com/pyca/bcrypt/commit/1a41437d3a38b856ed2d85161fecd28ffbc82fc6"><code>1a41437</code></a>
Update README.rst (<a
href="https://redirect.github.com/pyca/bcrypt/issues/682">#682</a>)</li>
<li><a
href="https://github.com/pyca/bcrypt/commit/7881c5beef0a8e00ecfd6a6decc3b5ba3a55db1c"><code>7881c5b</code></a>
Fix building windows abi3 wheels (<a
href="https://redirect.github.com/pyca/bcrypt/issues/681">#681</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/pyca/bcrypt/compare/4.0.1...4.1.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [sentry-sdk](https://github.com/getsentry/sentry-python) from
1.40.0 to 1.40.3.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/getsentry/sentry-python/releases">sentry-sdk's
releases</a>.</em></p>
<blockquote>
<h2>1.40.3</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Turn off metrics for uWSGI (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2720">#2720</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Minor improvements (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2714">#2714</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
</ul>
<h2>1.40.2</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>test: Fix <code>pytest</code> error (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2712">#2712</a>)
by <a
href="https://github.com/szokeasaurusrex"><code>@szokeasaurusrex</code></a></li>
<li>build(deps): bump types-protobuf from 4.24.0.4 to 4.24.0.20240129
(<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2691">#2691</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
</ul>
<h2>1.40.1</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Fix uWSGI workers hanging (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2694">#2694</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Make metrics work with <code>gevent</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2694">#2694</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Guard against <code>engine.url</code> being <code>None</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2708">#2708</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Fix performance regression in
<code>sentry_sdk.utils._generate_installed_modules</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2703">#2703</a>)
by <a
href="https://github.com/GlenWalker"><code>@GlenWalker</code></a></li>
<li>Guard against Sentry initialization mid SQLAlchemy cursor (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2702">#2702</a>)
by <a
href="https://github.com/apmorton"><code>@apmorton</code></a></li>
<li>Fix yaml generation script (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2695">#2695</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Fix AWS Lambda workflow (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2710">#2710</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Bump <code>codecov/codecov-action</code> from 3 to 4 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2706">#2706</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
<li>Bump <code>actions/cache</code> from 3 to 4 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2661">#2661</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
<li>Bump <code>actions/checkout</code> from 3.1.0 to 4.1.1 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2561">#2561</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
<li>Bump <code>github/codeql-action</code> from 2 to 3 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2603">#2603</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
<li>Bump <code>actions/setup-python</code> from 4 to 5 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2577">#2577</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/getsentry/sentry-python/blob/master/CHANGELOG.md">sentry-sdk's
changelog</a>.</em></p>
<blockquote>
<h2>1.40.3</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Turn off metrics for uWSGI (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2720">#2720</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Minor improvements (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2714">#2714</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
</ul>
<h2>1.40.2</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>test: Fix <code>pytest</code> error (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2712">#2712</a>)
by <a
href="https://github.com/szokeasaurusrex"><code>@szokeasaurusrex</code></a></li>
<li>build(deps): bump types-protobuf from 4.24.0.4 to 4.24.0.20240129
(<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2691">#2691</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
</ul>
<h2>1.40.1</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Fix uWSGI workers hanging (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2694">#2694</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Make metrics work with <code>gevent</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2694">#2694</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Guard against <code>engine.url</code> being <code>None</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2708">#2708</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Fix performance regression in
<code>sentry_sdk.utils._generate_installed_modules</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2703">#2703</a>)
by <a
href="https://github.com/GlenWalker"><code>@GlenWalker</code></a></li>
<li>Guard against Sentry initialization mid SQLAlchemy cursor (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2702">#2702</a>)
by <a
href="https://github.com/apmorton"><code>@apmorton</code></a></li>
<li>Fix yaml generation script (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2695">#2695</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Fix AWS Lambda workflow (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2710">#2710</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Bump <code>codecov/codecov-action</code> from 3 to 4 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2706">#2706</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
<li>Bump <code>actions/cache</code> from 3 to 4 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2661">#2661</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
<li>Bump <code>actions/checkout</code> from 3.1.0 to 4.1.1 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2561">#2561</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
<li>Bump <code>github/codeql-action</code> from 2 to 3 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2603">#2603</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
<li>Bump <code>actions/setup-python</code> from 4 to 5 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2577">#2577</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/getsentry/sentry-python/commit/84c4c127ffa53084b082bdb9630ac1d01e36b0d0"><code>84c4c12</code></a>
Update CHANGELOG.md</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/f92b4f2247be23e21f4797f848fb0621bedb64df"><code>f92b4f2</code></a>
release: 1.40.3</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/f23bdd32fef72ddc4590c574e9f14786e2aa0cf1"><code>f23bdd3</code></a>
fix(metrics): Turn off metrics for uWSGI (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2720">#2720</a>)</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/c77a1235f4d4f4d88129c13fa9586840ede48ce4"><code>c77a123</code></a>
Minor improvements (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2714">#2714</a>)</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/2186e227a5110ae71753e6cb8d83ffbbe683b72e"><code>2186e22</code></a>
Merge branch 'release/1.40.2'</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/139469a01ff6e720c22200747750ad3e770b1367"><code>139469a</code></a>
release: 1.40.2</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/d97e7d75f740942adfd61742372747b041a76228"><code>d97e7d7</code></a>
test: Fix <code>pytest</code> error (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2712">#2712</a>)</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/60e644c8e322a13c5a31ff93d25608d24cb58d51"><code>60e644c</code></a>
build(deps): bump types-protobuf from 4.24.0.4 to 4.24.0.20240129 (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2691">#2691</a>)</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/d769becc925e0d25c4fd80e95c0a61a6751d04f5"><code>d769bec</code></a>
Merge branch 'release/1.40.1'</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/ad25ed961bae0c6d93dfcd5bb0635c3325a33f05"><code>ad25ed9</code></a>
Update CHANGELOG.md</li>
<li>Additional commits viewable in <a
href="https://github.com/getsentry/sentry-python/compare/1.40.0...1.40.3">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Otherwise if we've stacked a bunch of requests for the keys of a server,
we'll end up sending lots of concurrent requests for its keys,
needlessly.
|
|
This basically reverts a change that was in
https://github.com/element-hq/synapse/pull/16833, where we reduced the
batching.
The smaller batching can cause performance issues on busy servers and
databases.
|
|
|
|
Now that the MSC3981 has passed FCP
|
|
|
|
|
|
ICU is an optional dependency and also a pain to install. Mention that
you can just not install it and still get a working installation.
|
|
Some links seemed to be incorrect (vector-im/sygnal and vector-im/sytest
have never been A Thing iirc) so pointed them back to matrix-org/*).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Introduced in #16833
Fixes #16844
|
|
|
|
|
|
breaking changes. (#16847)
Partially reverts #16796
This is causing errors of the form:
```
Error: Failed to CreateArtifact: Received non-retryable error: Failed request: (409) Conflict: an artifact with this name already exists on the workflow run
```
for the debs and wheels stages.
There were breaking changes that weren't included in the dependabot
changelog (:/):
https://github.com/actions/upload-artifact#breaking-changes
<!--
Fixes: # <!-- -->
<!--
Supersedes: # <!-- -->
<!--
Follows: # <!-- -->
<!--
Part of: # <!-- -->
Base: `release-v1.100` <!-- git-stack-base-branch:release-v1.100 -->
<!--
This pull request is commit-by-commit review friendly. <!-- -->
<!--
This pull request is intended for commit-by-commit review. <!-- -->
Original commit schedule, with full messages:
<ol>
<li>
Downgrade the `upload-artifact` and `download-artifact` actions to v3
</li>
</ol>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
|
|
|
|
|
|
This helps with bot accounts with lots of non-e2e devices.
The change is basically to change the order of the join for the case of
using `INNER JOIN`
|
|
During the migration the automated script to update the copyright
headers accidentally got rid of some of the existing copyright lines.
Reinstate them.
|
|
|
|
Pulled out of #16803 since the drive-by cleanup was maybe not as
drive-by as I had hoped.
<!--
Fixes: # <!-- -->
<!--
Supersedes: # <!-- -->
<!--
Follows: # <!-- -->
<!--
Part of: # <!-- -->
Base: `develop` <!-- git-stack-base-branch:develop -->
<!--
This pull request is commit-by-commit review friendly. <!-- -->
<!--
This pull request is intended for commit-by-commit review. <!-- -->
Original commit schedule, with full messages:
<ol>
<li>
Add a --generate-only option
</li>
</ol>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
|
|
More info [here](https://www.nginx.com/blog/nginx-plus-r30-released/).
Nginx threw error's at me when I used all the options of the doc
|
|
are violated when creating a new room. (#16811)
Prior to this PR, if a request to create a public (public as in
published to the rooms directory) room violated the room list
publication rules set in the
[config](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#room_list_publication_rules),
the request to create the room was denied and the room was not created.
This PR changes the behavior such that when a request to create a room
published to the directory violates room list publication rules, the
room is still created but the room is not published to the directory.
|
|
|
|
The ecosystem e.g. regex crate, have bumped up their MSRV to 1.65.0,
which was released Nov 2022. In line with our policy, let's bump to
match.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bumps [actions/cache](https://github.com/actions/cache) from 3 to 4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions/cache/releases">actions/cache's
releases</a>.</em></p>
<blockquote>
<h2>v4.0.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Update action to node20 by <a
href="https://github.com/takost"><code>@takost</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1284">actions/cache#1284</a></li>
<li>feat: save-always flag by <a
href="https://github.com/to-s"><code>@to-s</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1242">actions/cache#1242</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/takost"><code>@takost</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/cache/pull/1284">actions/cache#1284</a></li>
<li><a href="https://github.com/to-s"><code>@to-s</code></a> made their
first contribution in <a
href="https://redirect.github.com/actions/cache/pull/1242">actions/cache#1242</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/cache/compare/v3...v4.0.0">https://github.com/actions/cache/compare/v3...v4.0.0</a></p>
<h2>v3.3.3</h2>
<h2>What's Changed</h2>
<ul>
<li>Cache v3.3.3 by <a
href="https://github.com/robherley"><code>@robherley</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1302">actions/cache#1302</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/robherley"><code>@robherley</code></a>
made their first contribution in <a
href="https://redirect.github.com/actions/cache/pull/1302">actions/cache#1302</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/cache/compare/v3...v3.3.3">https://github.com/actions/cache/compare/v3...v3.3.3</a></p>
<h2>v3.3.2</h2>
<h2>What's Changed</h2>
<ul>
<li>Fixed readme with new segment timeout values by <a
href="https://github.com/kotewar"><code>@kotewar</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1133">actions/cache#1133</a></li>
<li>Readme fixes by <a
href="https://github.com/kotewar"><code>@kotewar</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1134">actions/cache#1134</a></li>
<li>Updated description of the lookup-only input for main action by <a
href="https://github.com/kotewar"><code>@kotewar</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1130">actions/cache#1130</a></li>
<li>Change two new actions mention as quoted text by <a
href="https://github.com/bishal-pdMSFT"><code>@bishal-pdMSFT</code></a>
in <a
href="https://redirect.github.com/actions/cache/pull/1131">actions/cache#1131</a></li>
<li>Update Cross-OS Caching tips by <a
href="https://github.com/pdotl"><code>@pdotl</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1122">actions/cache#1122</a></li>
<li>Bazel example (Take <a
href="https://redirect.github.com/actions/cache/issues/2">#2</a>️⃣) by
<a href="https://github.com/vorburger"><code>@vorburger</code></a> in
<a
href="https://redirect.github.com/actions/cache/pull/1132">actions/cache#1132</a></li>
<li>Remove actions to add new PRs and issues to a project board by <a
href="https://github.com/jorendorff"><code>@jorendorff</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1187">actions/cache#1187</a></li>
<li>Consume latest toolkit and fix dangling promise bug by <a
href="https://github.com/chkimes"><code>@chkimes</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1217">actions/cache#1217</a></li>
<li>Bump action version to 3.3.2 by <a
href="https://github.com/bethanyj28"><code>@bethanyj28</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1236">actions/cache#1236</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/vorburger"><code>@vorburger</code></a>
made their first contribution in <a
href="https://redirect.github.com/actions/cache/pull/1132">actions/cache#1132</a></li>
<li><a
href="https://github.com/jorendorff"><code>@jorendorff</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/cache/pull/1187">actions/cache#1187</a></li>
<li><a href="https://github.com/chkimes"><code>@chkimes</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/cache/pull/1217">actions/cache#1217</a></li>
<li><a
href="https://github.com/bethanyj28"><code>@bethanyj28</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/cache/pull/1236">actions/cache#1236</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/cache/compare/v3...v3.3.2">https://github.com/actions/cache/compare/v3...v3.3.2</a></p>
<h2>v3.3.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Reduced download segment size to 128 MB and timeout to 10 minutes by
<a href="https://github.com/kotewar"><code>@kotewar</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1129">actions/cache#1129</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/cache/compare/v3...v3.3.1">https://github.com/actions/cache/compare/v3...v3.3.1</a></p>
<h2>v3.3.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Bug: Permission is missing in cache delete example by <a
href="https://github.com/kotokaze"><code>@kotokaze</code></a> in <a
href="https://redirect.github.com/actions/cache/pull/1123">actions/cache#1123</a></li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/actions/cache/blob/main/RELEASES.md">actions/cache's
changelog</a>.</em></p>
<blockquote>
<h1>Releases</h1>
<h3>3.0.0</h3>
<ul>
<li>Updated minimum runner version support from node 12 -> node
16</li>
</ul>
<h3>3.0.1</h3>
<ul>
<li>Added support for caching from GHES 3.5.</li>
<li>Fixed download issue for files > 2GB during restore.</li>
</ul>
<h3>3.0.2</h3>
<ul>
<li>Added support for dynamic cache size cap on GHES.</li>
</ul>
<h3>3.0.3</h3>
<ul>
<li>Fixed avoiding empty cache save when no files are available for
caching. (<a
href="https://redirect.github.com/actions/cache/issues/624">issue</a>)</li>
</ul>
<h3>3.0.4</h3>
<ul>
<li>Fixed tar creation error while trying to create tar with path as
<code>~/</code> home folder on <code>ubuntu-latest</code>. (<a
href="https://redirect.github.com/actions/cache/issues/689">issue</a>)</li>
</ul>
<h3>3.0.5</h3>
<ul>
<li>Removed error handling by consuming actions/cache 3.0 toolkit, Now
cache server error handling will be done by toolkit. (<a
href="https://redirect.github.com/actions/cache/pull/834">PR</a>)</li>
</ul>
<h3>3.0.6</h3>
<ul>
<li>Fixed <a
href="https://redirect.github.com/actions/cache/issues/809">#809</a> -
zstd -d: no such file or directory error</li>
<li>Fixed <a
href="https://redirect.github.com/actions/cache/issues/833">#833</a> -
cache doesn't work with github workspace directory</li>
</ul>
<h3>3.0.7</h3>
<ul>
<li>Fixed <a
href="https://redirect.github.com/actions/cache/issues/810">#810</a> -
download stuck issue. A new timeout is introduced in the download
process to abort the download if it gets stuck and doesn't finish within
an hour.</li>
</ul>
<h3>3.0.8</h3>
<ul>
<li>Fix zstd not working for windows on gnu tar in issues <a
href="https://redirect.github.com/actions/cache/issues/888">#888</a> and
<a
href="https://redirect.github.com/actions/cache/issues/891">#891</a>.</li>
<li>Allowing users to provide a custom timeout as input for aborting
download of a cache segment using an environment variable
<code>SEGMENT_DOWNLOAD_TIMEOUT_MINS</code>. Default is 60 minutes.</li>
</ul>
<h3>3.0.9</h3>
<ul>
<li>Enhanced the warning message for cache unavailablity in case of
GHES.</li>
</ul>
<h3>3.0.10</h3>
<ul>
<li>Fix a bug with sorting inputs.</li>
<li>Update definition for restore-keys in README.md</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/actions/cache/commit/13aacd865c20de90d75de3b17ebe84f7a17d57d2"><code>13aacd8</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/cache/issues/1242">#1242</a>
from to-s/main</li>
<li><a
href="https://github.com/actions/cache/commit/53b35c543921fe2e8b288765ff817de9de8d906f"><code>53b35c5</code></a>
Merge branch 'main' into main</li>
<li><a
href="https://github.com/actions/cache/commit/65b8989fab3bb394817bdb845a453dff480c2b51"><code>65b8989</code></a>
Merge pull request <a
href="https://redirect.github.com/actions/cache/issues/1284">#1284</a>
from takost/update-to-node-20</li>
<li><a
href="https://github.com/actions/cache/commit/d0be34d54485f31ca2ccbe66e6ea3d96544a807b"><code>d0be34d</code></a>
Fix dist</li>
<li><a
href="https://github.com/actions/cache/commit/66cf064d47313d2cccf392d01bd10925da2bd072"><code>66cf064</code></a>
Merge branch 'main' into update-to-node-20</li>
<li><a
href="https://github.com/actions/cache/commit/1326563738ddb735c5f2ce85cba8c79f33b728cd"><code>1326563</code></a>
Merge branch 'main' into main</li>
<li><a
href="https://github.com/actions/cache/commit/e71876755e268d6cc25a5d3e3c46ae447e35290a"><code>e718767</code></a>
Fix format</li>
<li><a
href="https://github.com/actions/cache/commit/01229828ffa049a8dee4db27bcb23ed33f2b451f"><code>0122982</code></a>
Apply workaround for earlyExit</li>
<li><a
href="https://github.com/actions/cache/commit/3185ecfd6135856ca6d904ae032cff4f39b8b365"><code>3185ecf</code></a>
Update "only-" actions to node20</li>
<li><a
href="https://github.com/actions/cache/commit/25618a0a675e8447e5ffc8ed9b7ddb2aaf927f65"><code>25618a0</code></a>
Bump version</li>
<li>Additional commits viewable in <a
href="https://github.com/actions/cache/compare/v3...v4">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
This happened during the migration
|
|
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Broke in https://github.com/element-hq/synapse/pull/16802
|
|
|
|
The current query supports passing in a list of users, which generates a
query using `user_id = ANY(..)`. This is generates a less efficient
query plan that is notably slower than a simple `user_id = ?` condition.
Note: The new function is mostly a copy and paste and then a
simplification of the existing function.
|
|
The crux of the change is to try and make the queries simpler and pull
out fewer rows. Before, there were quite a few joins against subqueries,
which caused postgres to pull out more rows than necessary.
Instead, let's simplify the query and do some of the filtering out in
Python instead, letting Postgres do better optimizations now that it
doesn't have to deal with joins against subqueries.
Review note: this is a complete rewrite of the function, so not sure how
useful the diff is.
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
|
|
|
|
|
|
|
|
|
In previous versions of authlib using `client_secret_basic` without a
`client_secret` would result in an invalid auth header. Since authlib
1.3 it throws an exception.
The configuration may be accepted in by very lax servers, so we don't
want to deny it outright. Instead, let's default the
`client_auth_method` to `none`, which does the right thing. If the
config specifies `client_auth_method` and no `client_secret` then that
is going to be bogus and we should reject it
|
|
This hopefully reduces the amount of state we need to keep in memory
|
|
Bumps [types-commonmark](https://github.com/python/typeshed) from
0.9.2.4 to 0.9.2.20240106.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/python/typeshed/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [pyo3](https://github.com/pyo3/pyo3) from 0.20.0 to 0.20.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/pyo3/pyo3/releases">pyo3's
releases</a>.</em></p>
<blockquote>
<h2>PyO3 0.20.2</h2>
<p>This release corrects a failure to compile of the <code>either</code>
feature when the <code>experimental-inspect</code> feature is not
enabled.</p>
<p>It also adds backwards-compatibility for <code>pyo3</code> 0.20.0 to
build against <code>pyo3-build-config</code> 0.20.2, as
<code>pyo3</code> 0.20.0 was (unintentionally) not pinned against an
exact patch version <code>pyo3-build-config</code>, and
<code>pyo3</code> 0.20.0 could not build against
<code>pyo3-build-config</code> 0.20.1 due to an internal API
adjustment.</p>
<p>Thank you to the following users for the improvements:</p>
<p><a
href="https://github.com/adamreichold"><code>@adamreichold</code></a>
<a
href="https://github.com/davidhewitt"><code>@davidhewitt</code></a></p>
<h2>PyO3 0.20.1</h2>
<p>This release is a maintenance release to resolve <a
href="https://redirect.github.com/rust-lang/rust-clippy/issues/12039">a
clippy warning</a> which triggers on function arguments of
<code>Py<Self></code>.</p>
<p>This release also contains a few minor API additions, including
optional support for the <code>either</code> and <code>smallvec</code>
crates.</p>
<p>Thank you to the following users for the improvements:</p>
<p><a
href="https://github.com/adamreichold"><code>@adamreichold</code></a>
<a href="https://github.com/aldanor"><code>@aldanor</code></a>
<a href="https://github.com/alex"><code>@alex</code></a>
<a href="https://github.com/daemontus"><code>@daemontus</code></a>
<a href="https://github.com/davidhewitt"><code>@davidhewitt</code></a>
<a href="https://github.com/mejrs"><code>@mejrs</code></a>
<a href="https://github.com/messense"><code>@messense</code></a>
<a href="https://github.com/neachdainn"><code>@neachdainn</code></a>
<a href="https://github.com/orhun"><code>@orhun</code></a>
<a
href="https://github.com/suriya-ganesh"><code>@suriya-ganesh</code></a>
<a href="https://github.com/wyfo"><code>@wyfo</code></a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/PyO3/pyo3/blob/main/CHANGELOG.md">pyo3's
changelog</a>.</em></p>
<blockquote>
<h2>[0.20.2] - 2024-01-04</h2>
<h3>Packaging</h3>
<ul>
<li>Pin <code>pyo3</code> and <code>pyo3-ffi</code> dependencies on
<code>pyo3-build-config</code> to require the same patch version, i.e.
<code>pyo3</code> 0.20.2 requires <em>exactly</em>
<code>pyo3-build-config</code> 0.20.2. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3721">#3721</a></li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fix compile failure when building <code>pyo3</code> 0.20.0 with
latest <code>pyo3-build-config</code> 0.20.X. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3724">#3724</a></li>
<li>Fix docs.rs build. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3722">#3722</a></li>
</ul>
<h2>[0.20.1] - 2023-12-30</h2>
<h3>Added</h3>
<ul>
<li>Add optional <code>either</code> feature to add conversions for
<code>either::Either<L, R></code> sum type. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3456">#3456</a></li>
<li>Add optional <code>smallvec</code> feature to add conversions for
<code>smallvec::SmallVec</code>. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3507">#3507</a></li>
<li>Add <code>take</code> and <code>into_inner</code> methods to
<code>GILOnceCell</code> <a
href="https://redirect.github.com/PyO3/pyo3/pull/3556">#3556</a></li>
<li><code>#[classmethod]</code> methods can now also receive
<code>Py<PyType></code> as their first argument. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3587">#3587</a></li>
<li><code>#[pyfunction(pass_module)]</code> can now also receive
<code>Py<PyModule></code> as their first argument. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3587">#3587</a></li>
<li>Add <code>traverse</code> method to <code>GILProtected</code>. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3616">#3616</a></li>
<li>Added <code>abi3-py312</code> feature <a
href="https://redirect.github.com/PyO3/pyo3/pull/3687">#3687</a></li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fix minimum version specification for optional <code>chrono</code>
dependency. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3512">#3512</a></li>
<li>Silenced new <code>clippy::unnecessary_fallible_conversions</code>
warning when using a <code>Py<Self></code> <code>self</code>
receiver. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3564">#3564</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/PyO3/pyo3/commit/bcef18b988a519aca93c29039fa0894a310d2eaf"><code>bcef18b</code></a>
release: 0.20.2</li>
<li><a
href="https://github.com/PyO3/pyo3/commit/fa6d60b77ec67654b7639beccd794874a8ddc9eb"><code>fa6d60b</code></a>
Use a definite version specification when depending on
pyo3-build-config.</li>
<li><a
href="https://github.com/PyO3/pyo3/commit/f9f0bdde702e794838ab521c8172c4744e663693"><code>f9f0bdd</code></a>
Merge pull request <a
href="https://redirect.github.com/pyo3/pyo3/issues/3724">#3724</a> from
davidhewitt/fix-build-config-issue</li>
<li><a
href="https://github.com/PyO3/pyo3/commit/cf213252fa5c780503cb1772622a38d7b34cd874"><code>cf21325</code></a>
re-add emit_pyo3_cfgs for pyo3 0.20.0 compatibility</li>
<li><a
href="https://github.com/PyO3/pyo3/commit/f7893858d2e01df03f2e711a811b95f08f8ca5e1"><code>f789385</code></a>
Merge pull request <a
href="https://redirect.github.com/pyo3/pyo3/issues/3722">#3722</a> from
PyO3/fix-doc-build</li>
<li><a
href="https://github.com/PyO3/pyo3/commit/9120b35f3553c231797bf2dc357fcd4fe0bf5dec"><code>9120b35</code></a>
Include the experimental-inspect feature for the docs.rs build thereby
making...</li>
<li><a
href="https://github.com/PyO3/pyo3/commit/2e79c557ccc628d4081661a712463e22fc780c92"><code>2e79c55</code></a>
Add CI job to test the equivalent of a docs.rs build.</li>
<li><a
href="https://github.com/PyO3/pyo3/commit/2564ca4e7558396f166837d8795f8e1bfd698007"><code>2564ca4</code></a>
Fix missing feature flags in implementation of Either conversion.</li>
<li><a
href="https://github.com/PyO3/pyo3/commit/be4d5627a33bc3575e3811e68c3366a9e264db77"><code>be4d562</code></a>
Merge pull request <a
href="https://redirect.github.com/pyo3/pyo3/issues/3713">#3713</a> from
PyO3/release-0.20.1</li>
<li><a
href="https://github.com/PyO3/pyo3/commit/d3f034a80f2973e4d21fc2fd49cd0af309f1ab4d"><code>d3f034a</code></a>
release: 0.20.1</li>
<li>Additional commits viewable in <a
href="https://github.com/pyo3/pyo3/compare/v0.20.0...v0.20.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Sometimes we fail to fetch events during backfill due to missing state,
and we often end up querying the same bad events periodically (as people
backpaginate). In such cases its likely we will continue to fail to get
the state, and therefore we should try *before* loading the state that
we have from the DB (as otherwise it's wasted DB and memory).
---------
Co-authored-by: reivilibre <oliverw@matrix.org>
|
|
Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.75 to 1.0.79.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/anyhow/releases">anyhow's
releases</a>.</em></p>
<blockquote>
<h2>1.0.79</h2>
<ul>
<li>Work around improperly cached build script result by sccache (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/340">#340</a>)</li>
</ul>
<h2>1.0.78</h2>
<ul>
<li>Reduce spurious rebuilds under RustRover IDE when using a nightly
toolchain (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/337">#337</a>)</li>
</ul>
<h2>1.0.77</h2>
<ul>
<li>Make <code>anyhow::Error::backtrace</code> available on stable Rust
compilers 1.65+ (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/293">#293</a>,
thanks <a
href="https://github.com/LukasKalbertodt"><code>@LukasKalbertodt</code></a>)</li>
</ul>
<h2>1.0.76</h2>
<ul>
<li>Opt in to <code>unsafe_op_in_unsafe_fn</code> lint (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/329">#329</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/anyhow/commit/71ab53dd2e89ff816bebaa452ad5a968f4c4105d"><code>71ab53d</code></a>
Release 1.0.79</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/60705a53cefdc387b72c20cbab88aa4ffcf4b38e"><code>60705a5</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/340">#340</a>
from dtolnay/depinfo</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/17e252bfdf4f7a2dff8e788ef7deab326682bbba"><code>17e252b</code></a>
Include env-dep:RUSTC_BOOTSTRAP in dep-info for sccache</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/04774c089409597e4859ed256ef68eeb60ba81a7"><code>04774c0</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/338">#338</a>
from dtolnay/nightlyci</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/1fd290c222f28ade7f5ee6f049a47b93a51b1f97"><code>1fd290c</code></a>
Make CI verify that error_generic_member_access works in latest
nightly</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/ee414707be0d4b6f0f109d0a85e4d10651e4aa2c"><code>ee41470</code></a>
RUSTC must be set by Cargo for build script</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/38c79ef242fdfb124e499a58d917286ed1d4cad5"><code>38c79ef</code></a>
Release 1.0.78</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/ded2295ff5cd6e759b30b12cd127ffe0bc658f0f"><code>ded2295</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/337">#337</a>
from dtolnay/bootstrap</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/ae45b672c944e87cec570cf29389cfe0c0c2599a"><code>ae45b67</code></a>
Do not rebuild on RUSTC_BOOTSTRAP changes on nightly compiler</li>
<li><a
href="https://github.com/dtolnay/anyhow/commit/2d32366f581f82256208181fa2c02285888fd4df"><code>2d32366</code></a>
Update crate name used for build script probe</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/anyhow/compare/1.0.75...1.0.79">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [sentry-sdk](https://github.com/getsentry/sentry-python) from
1.35.0 to 1.39.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/getsentry/sentry-python/releases">sentry-sdk's
releases</a>.</em></p>
<blockquote>
<h2>1.39.1</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Fix psycopg2 detection in the Django integration (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2593">#2593</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Filter out empty string releases (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2591">#2591</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Fixed local var not present when there is an error in a user's
<code>error_sampler</code> function (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2511">#2511</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
<li>Fixed typing in <code>aiohttp</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2590">#2590</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
</ul>
<h2>1.39.0</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Add support for cluster clients from Redis SDK (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2394">#2394</a>)
by <a href="https://github.com/md384"><code>@md384</code></a></li>
<li>Improve location reporting for timer metrics (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2552">#2552</a>)
by <a
href="https://github.com/mitsuhiko"><code>@mitsuhiko</code></a></li>
<li>Fix Celery <code>TypeError</code> with no-argument
<code>apply_async</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2575">#2575</a>)
by <a
href="https://github.com/szokeasaurusrex"><code>@szokeasaurusrex</code></a></li>
<li>Fix Lambda integration with EventBridge source (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2546">#2546</a>)
by <a
href="https://github.com/davidcroda"><code>@davidcroda</code></a></li>
<li>Add max tries to Spotlight (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2571">#2571</a>)
by <a href="https://github.com/hazAT"><code>@hazAT</code></a></li>
<li>Handle <code>os.path.devnull</code> access issues (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2579">#2579</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Change <code>code.filepath</code> frame picking logic (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2568">#2568</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Trigger AWS Lambda tests on label (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2538">#2538</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Run permissions step on pull_request_target but not push (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2548">#2548</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Hash AWS Lambda test functions based on current revision (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2557">#2557</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Update Django version in tests (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2562">#2562</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Make metrics tests non-flaky (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2572">#2572</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
</ul>
<h2>1.38.0</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Only add trace context to checkins and do not run
<code>event_processors</code> for checkins (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2536">#2536</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
<li>Metric span summaries (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2522">#2522</a>)
by <a
href="https://github.com/mitsuhiko"><code>@mitsuhiko</code></a></li>
<li>Add source context to code locations (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2539">#2539</a>)
by <a
href="https://github.com/jan-auer"><code>@jan-auer</code></a></li>
<li>Use in-app filepath instead of absolute path (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2541">#2541</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
<li>Switch to <code>jinja2</code> for generating CI yamls (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2534">#2534</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
</ul>
<h2>1.37.1</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Fix <code>NameError</code> on <code>parse_version</code> with
eventlet (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2532">#2532</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>build(deps): bump checkouts/data-schemas from <code>68def1e</code>
to <code>e9f7d58</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2501">#2501</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
</ul>
<h2>1.37.0</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>
<p>Move installed modules code to utils (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2429">#2429</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></p>
<p>Note: We moved the internal function
<code>_get_installed_modules</code> from
<code>sentry_sdk.integrations.modules</code> to
<code>sentry_sdk.utils</code>.
So if you use this function you have to update your imports</p>
</li>
<li>
<p>Add code locations for metrics (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2526">#2526</a>)
by <a href="https://github.com/jan-auer"><code>@jan-auer</code></a></p>
</li>
<li>
<p>Add query source to DB spans (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2521">#2521</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></p>
</li>
<li>
<p>Send events to Spotlight sidecar (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2524">#2524</a>)
by <a href="https://github.com/HazAT"><code>@HazAT</code></a></p>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/getsentry/sentry-python/blob/master/CHANGELOG.md">sentry-sdk's
changelog</a>.</em></p>
<blockquote>
<h2>1.39.1</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Fix psycopg2 detection in the Django integration (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2593">#2593</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Filter out empty string releases (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2591">#2591</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Fixed local var not present when there is an error in a user's
<code>error_sampler</code> function (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2511">#2511</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
<li>Fixed typing in <code>aiohttp</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2590">#2590</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
</ul>
<h2>1.39.0</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Add support for cluster clients from Redis SDK (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2394">#2394</a>)
by <a href="https://github.com/md384"><code>@md384</code></a></li>
<li>Improve location reporting for timer metrics (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2552">#2552</a>)
by <a
href="https://github.com/mitsuhiko"><code>@mitsuhiko</code></a></li>
<li>Fix Celery <code>TypeError</code> with no-argument
<code>apply_async</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2575">#2575</a>)
by <a
href="https://github.com/szokeasaurusrex"><code>@szokeasaurusrex</code></a></li>
<li>Fix Lambda integration with EventBridge source (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2546">#2546</a>)
by <a
href="https://github.com/davidcroda"><code>@davidcroda</code></a></li>
<li>Add max tries to Spotlight (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2571">#2571</a>)
by <a href="https://github.com/hazAT"><code>@hazAT</code></a></li>
<li>Handle <code>os.path.devnull</code> access issues (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2579">#2579</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Change <code>code.filepath</code> frame picking logic (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2568">#2568</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Trigger AWS Lambda tests on label (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2538">#2538</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Run permissions step on pull_request_target but not push (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2548">#2548</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Hash AWS Lambda test functions based on current revision (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2557">#2557</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Update Django version in tests (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2562">#2562</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>Make metrics tests non-flaky (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2572">#2572</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
</ul>
<h2>1.38.0</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Only add trace context to checkins and do not run
<code>event_processors</code> for checkins (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2536">#2536</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
<li>Metric span summaries (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2522">#2522</a>)
by <a
href="https://github.com/mitsuhiko"><code>@mitsuhiko</code></a></li>
<li>Add source context to code locations (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2539">#2539</a>)
by <a
href="https://github.com/jan-auer"><code>@jan-auer</code></a></li>
<li>Use in-app filepath instead of absolute path (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2541">#2541</a>)
by <a
href="https://github.com/antonpirker"><code>@antonpirker</code></a></li>
<li>Switch to <code>jinja2</code> for generating CI yamls (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2534">#2534</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
</ul>
<h2>1.37.1</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>Fix <code>NameError</code> on <code>parse_version</code> with
eventlet (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2532">#2532</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></li>
<li>build(deps): bump checkouts/data-schemas from <code>68def1e</code>
to <code>e9f7d58</code> (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2501">#2501</a>)
by <a
href="https://github.com/dependabot"><code>@dependabot</code></a></li>
</ul>
<h2>1.37.0</h2>
<h3>Various fixes & improvements</h3>
<ul>
<li>
<p>Move installed modules code to utils (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2429">#2429</a>)
by <a
href="https://github.com/sentrivana"><code>@sentrivana</code></a></p>
<p>Note: We moved the internal function
<code>_get_installed_modules</code> from
<code>sentry_sdk.integrations.modules</code> to
<code>sentry_sdk.utils</code>.</p>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/getsentry/sentry-python/commit/2b46ec3ba2bb7fd12faf0109ca0b371235fe8ab6"><code>2b46ec3</code></a>
Update CHANGELOG.md</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/d634c059ea6085be19a941d518bd7ed3405c3a8d"><code>d634c05</code></a>
release: 1.39.1</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/d76fa983329610314c9c105df2fc88278d149db0"><code>d76fa98</code></a>
fix(django): Fix psycopg2 detection (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2593">#2593</a>)</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/64c42ca975b804b0277643a761df099717d10253"><code>64c42ca</code></a>
fix(utils): Filter out empty string releases (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2591">#2591</a>)</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/47313123d8c9b1dadce5460168d2ed849ee5730a"><code>4731312</code></a>
Fixed local var not present when error in users error_sampler function
(<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2511">#2511</a>)</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/4deaa384136b610579e891fcd7b1641917aa091c"><code>4deaa38</code></a>
Fixed typing in aiohttp (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2590">#2590</a>)</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/507d4098fba1fde2a6db7121591d6f5a1d151b69"><code>507d409</code></a>
Merge branch 'release/1.39.0'</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/c6cd6360d805673694b00474bd14ba4b9755bf99"><code>c6cd636</code></a>
Update CHANGELOG.md</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/c3a60a60a2c72e7122f3a3faa3a552ceb39b1663"><code>c3a60a6</code></a>
release: 1.39.0</li>
<li><a
href="https://github.com/getsentry/sentry-python/commit/7df152ba3d37024117b4235178c65f08bdeab21c"><code>7df152b</code></a>
Change <code>code.filepath</code> frame picking logic (<a
href="https://redirect.github.com/getsentry/sentry-python/issues/2568">#2568</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/getsentry/sentry-python/compare/1.35.0...1.39.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.108 to
1.0.111.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.111</h2>
<ul>
<li>Improve floating point parsing performance on loongarch64 (<a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
thanks <a
href="https://github.com/heiher"><code>@heiher</code></a>)</li>
</ul>
<h2>v1.0.110</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
<h2>v1.0.109</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a>
Release 1.0.111</li>
<li><a
href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
from heiher/limb-64-la64</li>
<li><a
href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a>
Set limb width to 64 for loongarch64</li>
<li><a
href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a>
Release 1.0.110</li>
<li><a
href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a>
Release 1.0.109</li>
<li><a
href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
from serde-rs/doccfg</li>
<li><a
href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a>
Restore doc cfg on re-exports</li>
<li><a
href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
from dtolnay/hashtest</li>
<li><a
href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a>
Eliminate hash closure in favor of calling hash_one directly</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.111">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
There are two changes here:
1. Only pull out the required state when handling the request.
2. Change the get filtered state return type to check that we're only
querying state that was requested
---------
Co-authored-by: reivilibre <oliverw@matrix.org>
|
|
Otherwise for users with large numbers of devices this can cause a lot
of woe.
|
|
Otherwise if you hit the `Enable auto-merge` button and the linting
fails the PR is still aut-merged.
|
|
Since we don't require one anymore.
|
|
|
|
Bumps [types-jsonschema](https://github.com/python/typeshed) from
4.20.0.0 to 4.20.0.20240105.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/python/typeshed/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Instead of persisting outliers in a bunch of batches, let's just do them
all at once.
This is fine because all `_auth_and_persist_outliers_inner` is doing is
checking the auth rules for each event, which requires the events to be
topologically sorted by the auth graph.
|
|
Bumps [authlib](https://github.com/lepture/authlib) from 1.2.1 to 1.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lepture/authlib/releases">authlib's
releases</a>.</em></p>
<blockquote>
<h2>Version 1.3.0</h2>
<p><strong>Bug fixes</strong></p>
<ul>
<li>Restore AuthorizationServer.create_authorization_response behavior,
via <a
href="https://redirect.github.com/lepture/authlib/issues/558">#558</a>
by <a
href="https://github.com/TurnrDev"><code>@TurnrDev</code></a></li>
<li>Include leeway in validate_iat() for JWT, via <a
href="https://redirect.github.com/lepture/authlib/issues/565">#565</a>
by <a href="https://github.com/dhallam"><code>@dhallam</code></a></li>
<li>Fix encode_client_secret_basic, via <a
href="https://redirect.github.com/lepture/authlib/issues/594">#594</a>
by <a href="https://github.com/Prilkop"><code>@Prilkop</code></a></li>
<li>Use single key in JWK if JWS does not specify kid, via <a
href="https://redirect.github.com/lepture/authlib/issues/596">#596</a>
by <a
href="https://github.com/dklimpel"><code>@dklimpel</code></a></li>
<li>Fix error when RFC9068 JWS has no scope field, via <a
href="https://redirect.github.com/lepture/authlib/issues/598">#598</a>
by <a
href="https://github.com/tanguilp"><code>@tanguilp</code></a></li>
<li>Get werkzeug version using importlib, via <a
href="https://redirect.github.com/lepture/authlib/issues/591">#591</a>
by <a
href="https://github.com/Sparrow0hawk"><code>@Sparrow0hawk</code></a></li>
</ul>
<p><strong>Breaking changes</strong></p>
<ul>
<li>RFC9068 implementation, via <a
href="https://redirect.github.com/lepture/authlib/issues/586">#586</a>
by <a href="https://github.com/azmeuk"><code>@azmeuk</code></a>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/lepture/authlib/blob/master/docs/changelog.rst">authlib's
changelog</a>.</em></p>
<blockquote>
<h2>Version 1.3.0</h2>
<p><strong>Released on Dec 17, 2023</strong></p>
<ul>
<li>Restore
<code>AuthorizationServer.create_authorization_response</code> behavior,
via :PR:<code>558</code></li>
<li>Include <code>leeway</code> in <code>validate_iat()</code> for JWT,
via :PR:<code>565</code></li>
<li>Fix <code>encode_client_secret_basic</code>, via
:PR:<code>594</code></li>
<li>Use single key in JWK if JWS does not specify <code>kid</code>, via
:PR:<code>596</code></li>
<li>Fix error when RFC9068 JWS has no scope field, via
:PR:<code>598</code></li>
<li>Get werkzeug version using importlib, via :PR:<code>591</code></li>
</ul>
<p><strong>New features</strong>:</p>
<ul>
<li>RFC9068 implementation, via :PR:<code>586</code>, by <a
href="https://github.com/azmeuk"><code>@azmeuk</code></a>.</li>
</ul>
<p><strong>Breaking changes</strong>:</p>
<ul>
<li>End support for python 3.7</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/lepture/authlib/commit/a7d68b4c3b8a3a7fe0b62943b5228669f2f3dfec"><code>a7d68b4</code></a>
chore: release 1.3.0</li>
<li><a
href="https://github.com/lepture/authlib/commit/a26f1d099326aa53e39fd1df4fee27f3b8a519d9"><code>a26f1d0</code></a>
Merge GitHub action for release</li>
<li><a
href="https://github.com/lepture/authlib/commit/2d66702dec486292231f378780c3e39f55dc91b8"><code>2d66702</code></a>
Merge pull request <a
href="https://redirect.github.com/lepture/authlib/issues/591">#591</a>
from Sparrow0hawk/patch-2</li>
<li><a
href="https://github.com/lepture/authlib/commit/0f8e08738b597af27a21312f4e937c1366d14e6d"><code>0f8e087</code></a>
docs: add changelog for 1.3.0</li>
<li><a
href="https://github.com/lepture/authlib/commit/3ffc950d5b7d3e85ca908c461a9e99d1adba54e6"><code>3ffc950</code></a>
chore: fix pypi release action</li>
<li><a
href="https://github.com/lepture/authlib/commit/a2543b9ad0836b85e54f126124006f0f09df46fd"><code>a2543b9</code></a>
chore: add pypi github action</li>
<li><a
href="https://github.com/lepture/authlib/commit/c7e1b2d41db58a48d3d3e2a7c39425be381ffc21"><code>c7e1b2d</code></a>
chore: move configuration from setup.cfg to pyproject.toml</li>
<li><a
href="https://github.com/lepture/authlib/commit/04e83f60aeb4f5302edb831b46389df2c9342a16"><code>04e83f6</code></a>
Merge pull request <a
href="https://redirect.github.com/lepture/authlib/issues/598">#598</a>
from tanguilp/fix-rfc9068-no-scope-in-jws</li>
<li><a
href="https://github.com/lepture/authlib/commit/092f688b0dd57021e41ba5bc4ceecf15de8bc84e"><code>092f688</code></a>
Fix error when RFC9068 JWS has no scope field</li>
<li><a
href="https://github.com/lepture/authlib/commit/ac583226552551cef453b0dec8506ddb7df5bccc"><code>ac58322</code></a>
Get werkzeug version using importlib</li>
<li>Additional commits viewable in <a
href="https://github.com/lepture/authlib/compare/v1.2.1...v1.3.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
|
|
|
|
|
|
when those rooms block that homeserver by their Access Control Lists. (#16759)
The idea here being that the directory server shouldn't advertise rooms
to a requesting server is the requesting server would not be allowed to
join or participate in the room.
<!--
Fixes: # <!-- -->
<!--
Supersedes: # <!-- -->
<!--
Follows: # <!-- -->
<!--
Part of: # <!-- -->
Base: `develop` <!-- git-stack-base-branch:develop -->
<!--
This pull request is commit-by-commit review friendly. <!-- -->
<!--
This pull request is intended for commit-by-commit review. <!-- -->
Original commit schedule, with full messages:
<ol>
<li>
Pass `from_federation_origin` down into room list retrieval code
</li>
<li>
Don't cache /publicRooms response for inbound federated requests
</li>
<li>
fixup! Don't cache /publicRooms response for inbound federated requests
</li>
<li>
Cap the number of /publicRooms entries to 100
</li>
<li>
Simplify code now that you can't request unlimited rooms
</li>
<li>
Filter out rooms from federated requests that don't have the correct ACL
</li>
<li>
Request a handful more when filtering ACLs so that we can try to avoid
shortchanging the requester
</li>
</ol>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
|
|
There are a couple of things we need to be careful of here:
1. The current python code does no validation when loading from the DB,
so we need to be careful to ignore such errors (at least on jki.re there
are some old events with internal metadata fields of the wrong type).
2. We want to be memory efficient, as we often have many hundreds of
thousands of events in the cache at a time.
---------
Co-authored-by: Quentin Gliech <quenting@element.io>
|
|
Introduced in #16762
|
|
We remove these fields as they're just duplicating data the event
already stores, and (for reasons :shushing_face:) I'd like to simplify
the class to only store simple types.
I'm not entirely convinced that we shouldn't instead add helper methods
to the event class to generate stream tokens, but I don't really think
that's where they belong either
|
|
Signed-off-by: Gaël Goinvic <gaelg@element.io>
|
|
This is an extra response parameter just added to MSC3981. In the
current impl, the recursion depth is always 3, so this just returns a
static 3 if the recurse parameter is supplied.
|
|
Closes #16370
Signed-off-by: Adam Jedrzejewski <adamjedrzejewski@icloud.com>
|
|
|
|
Previously, the response status of `HTMLResource` was hardcoded as
`200`. However, for proper redirection after the user verifies their
email, we require the status to be `302`. This PR addresses that issue
by using `code` as response status.
|
|
|
|
This reverts commit 742bae3761b7b2c638975f853ab6161527629240.
|
|
Added in https://github.com/matrix-org/synapse/pull/16533, this workflow
was intended to be run once to add the version picker to all historical
versions of the https://matrix-org.github.io/synapse documentation
website.
Note that the latest version of the docs built from this repo now exist
at https://element-hq.github.io/synapse/.
The workflow has been run successfully and the version picker was added
to the documentation. Thus we can now delete this workflow.
---
Note: Do not confuse this PR with
https://github.com/matrix-org/synapse/issues/9453. This PR was made
while we were populating this repo with "Dummy issues" after the
changeover from matrix-org/synapse to element-hq/synapse - therefore
referencing this PR may cause some confusion.
|
|
Signed-off-by: Christian Lölkes <christian.loelkes@gmail.com>
|
|
Closes:
- https://github.com/matrix-org/synapse/issues/10397
- #10397
An administrator should know whether he wants to set a password or not.
There are many uses cases where a blank password is required.
- Use of only some users with SSO.
- Use of bots with password, users with SSO
|
|
Signed-off-by: Fredrik Lanker <fredrik@lanker.se>
|
|
At least for vscode this allows click through / type checking / syntax
highlighting.
|
|
I accidentally broke it during the move by removing a trailing new line.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(cherry picked from commit be65a8ec0195955c15fdb179c9158b187638e39a)
|
|
|
|
|
|
|
|
|
|
|
|
(#16738)
|
|
|
|
|
|
|
|
|
|
Bumps [isort](https://github.com/pycqa/isort) from 5.13.0 to 5.13.1.
- [Release notes](https://github.com/pycqa/isort/releases)
- [Changelog](https://github.com/PyCQA/isort/blob/main/CHANGELOG.md)
- [Commits](https://github.com/pycqa/isort/compare/5.13.0...5.13.1)
---
updated-dependencies:
- dependency-name: isort
dependency-type: direct:development
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [types-setuptools](https://github.com/python/typeshed) from 68.2.0.2 to 69.0.0.0.
- [Commits](https://github.com/python/typeshed/commits)
---
updated-dependencies:
- dependency-name: types-setuptools
dependency-type: direct:development
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [isort](https://github.com/pycqa/isort) from 5.12.0 to 5.13.0.
- [Release notes](https://github.com/pycqa/isort/releases)
- [Changelog](https://github.com/PyCQA/isort/blob/main/CHANGELOG.md)
- [Commits](https://github.com/pycqa/isort/compare/5.12.0...5.13.0)
---
updated-dependencies:
- dependency-name: isort
dependency-type: direct:development
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [ruff](https://github.com/astral-sh/ruff) from 0.1.6 to 0.1.7.
- [Release notes](https://github.com/astral-sh/ruff/releases)
- [Changelog](https://github.com/astral-sh/ruff/blob/main/CHANGELOG.md)
- [Commits](https://github.com/astral-sh/ruff/compare/v0.1.6...v0.1.7)
---
updated-dependencies:
- dependency-name: ruff
dependency-type: direct:development
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [actions/setup-go](https://github.com/actions/setup-go) from 4 to 5.
- [Release notes](https://github.com/actions/setup-go/releases)
- [Commits](https://github.com/actions/setup-go/compare/v4...v5)
---
updated-dependencies:
- dependency-name: actions/setup-go
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 4 to 5.
- [Release notes](https://github.com/actions/setup-python/releases)
- [Commits](https://github.com/actions/setup-python/compare/v4...v5)
---
updated-dependencies:
- dependency-name: actions/setup-python
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [pydantic](https://github.com/pydantic/pydantic) from 2.5.1 to 2.5.2.
- [Release notes](https://github.com/pydantic/pydantic/releases)
- [Changelog](https://github.com/pydantic/pydantic/blob/v2.5.2/HISTORY.md)
- [Commits](https://github.com/pydantic/pydantic/compare/v2.5.1...v2.5.2)
---
updated-dependencies:
- dependency-name: pydantic
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Bumps [immutabledict](https://github.com/corenting/immutabledict) from 3.0.0 to 4.0.0.
- [Release notes](https://github.com/corenting/immutabledict/releases)
- [Changelog](https://github.com/corenting/immutabledict/blob/master/CHANGELOG.md)
- [Commits](https://github.com/corenting/immutabledict/compare/v3.0.0...v4.0.0)
---
updated-dependencies:
- dependency-name: immutabledict
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
|
|
|
|
Co-authored-by: Fabian Klemp <fabian.klemp@frequentis.com>
|
|
|
|
Co-authored-by: Quentin Gliech <quenting@element.io>
|
|
This reverts two commits:
0bb8e418a41c6f583ca9d705b400e37e2308a534
"Fix postgres schema after dropping old tables (#16730)"
and
51e4e35653f98c3f61222fbdbdb1dcb8864f7fca
"Add a Postgres `REPLICA IDENTITY` to tables that do not have an implicit one. This should allow use of Postgres logical replication. (take 2, now with no added deadlocks!) (#16658)"
and also amends the changelog.
|
|
|
|
|
|
|
|
|
|
|
|
/_synapse/admin/v1/federation/destinations (#16729)
|
|
|
|
one. This should allow use of Postgres logical replication. (take 2, now with no added deadlocks!) (#16658)
* Add `ALTER TABLE ... REPLICA IDENTITY ...` for individual tables
We can't combine them into one file as it makes it likely to hit a deadlock
if Synapse is running, as it only takes one other transaction to access two
tables in a different order to the schema delta.
* Add notes
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Re-introduce REPLICA IDENTITY test
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
|
|
(#16700)
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
MSC: https://github.com/matrix-org/matrix-spec-proposals/pull/4069
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
|
Signed-off-by: Andrii Yasynyshyn yasinishyn.a.n@gmail.com
|
|
|
|
poetry-core 1.8.x includes a fix which properly moves the generate
synapse_rust.abi3.so file to the synapse directory when using an
editable install.
Without this change developers are left with a confusing experience
of the synapse.synapse_rust module not being found after installation.
|
|
|
|
Implement MSC3860 to follow redirects for federated media downloads.
Note that the Client-Server API doesn't support this (yet) since the media
repository in Synapse doesn't have a way of supporting redirects.
|
|
* Reduce DB load when forget on leave setting is disabled
* Newsfile
|
