| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
| |
provided (#12370)
|
| |
|
|
|
|
|
|
|
|
|
| |
Refactor and convert `Linearizer` to async. This makes a `Linearizer`
cancellation bug easier to fix.
Also refactor to use an async context manager, which eliminates an
unlikely footgun where code that doesn't immediately use the context
manager could forget to release the lock.
Signed-off-by: Sean Quah <seanq@element.io>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
(MSC2716) (#12329)
Part of https://github.com/matrix-org/synapse/issues/12110
Complement test: https://github.com/matrix-org/complement/pull/354
Previously, they didn't resolve because async `filter_events_for_client`
removes all outlier state except for out-of-band membership.
And fundamentally, we have the state at these events so they shouldn't be marked as outliers.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a first step in dealing with #7721.
The idea is basically that rather than calculating the full set of users a device list update needs to be sent to up front, we instead simply record the rooms the user was in at the time of the change. This will allow a few things:
1. we can defer calculating the set of remote servers that need to be poked about the change; and
2. during `/sync` and `/keys/changes` we can avoid also avoid calculating users who share rooms with other users, and instead just look at the rooms that have changed.
However, care needs to be taken to correctly handle server downgrades. As such this PR writes to both `device_lists_changes_in_room` and the `device_lists_outbound_pokes` table synchronously. In a future release we can then bump the database schema compat version to `69` and then we can assume that the new `device_lists_changes_in_room` exists and is handled.
There is a temporary option to disable writing to `device_lists_outbound_pokes` synchronously, allowing us to test the new code path does work (and by implication upgrading to a future release and downgrading to this one will work correctly).
Note: Ideally we'd do the calculation of room to servers on a worker (e.g. the background worker), but currently only master can write to the `device_list_outbound_pokes` table.
|
| |
|
|
| |
not specify one, according to spec. (#12350)
|
| |
|
| |
If we're missing most of the events in the room state, then we may as well call the /state endpoint, instead of individually requesting each and every event.
|
| |
|
|
| |
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| | |
|
| |
|
|
|
| |
The PaginationChunk class attempted to bundle some properties
together, but really just caused callers to jump through hoops and
hid implementation details.
|
| |
|
|
|
|
|
|
|
| |
This endpoint was removed from MSC2675 before it was approved.
It is currently unspecified (even in any MSCs) and therefore subject to
removal. It is not implemented by any known clients.
This also changes the bundled aggregation format for `m.annotation`,
which previously included pagination tokens for the `/aggregations`
endpoint, which are no longer useful.
|
| |
|
| |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
| |
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| |
|
|
| |
Do not attempt to send remote joins out over federation. Normally, it will do
nothing; occasionally, it will do the wrong thing.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Follow-up to https://github.com/matrix-org/synapse/pull/12083
Since we are now using the new `state_event_ids` parameter to do all of the heavy lifting.
We can remove any spots where we plumbed `auth_event_ids` just for MSC2716 things in
https://github.com/matrix-org/synapse/pull/9247/files.
Removing `auth_event_ids` from following functions:
- `create_and_send_nonmember_event`
- `_local_membership_update`
- `update_membership`
- `update_membership_locked`
|
| |
|
|
|
|
|
| |
`state_event_ids`, which accurately describes the usage with MSC2716 instead of abusing `auth_event_ids` (#12083)
Spawned from https://github.com/matrix-org/synapse/pull/10975#discussion_r813183430
Part of [MSC2716](https://github.com/matrix-org/matrix-spec-proposals/pull/2716)
|
| |
|
|
|
| |
Hopefully this fixes #12257.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
|
| |
Filter the events returned from `/relations` for the requester's ignored users
in a similar way to `/messages` (and `/sync`).
|
| | |
|
| |
|
|
|
| |
* Replace `get_state_for_pdu` with `get_state_ids_for_pdu` and `get_events_as_list`.
* Return a 404 from `/state` and `/state_ids` for an outlier
|
| |
|
|
|
| |
The get_bundled_aggregations code is fairly high-level and uses
a lot of store methods, we move it into the handler as that seems
like a better fit.
|
| |
|
|
|
|
|
| |
* Formally type the UserProfile in user searches
* export UserProfile in synapse.module_api
* Update docs
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
|
| |
|
| |
Adds a handler layer between the REST and datastore layers for relations.
|
| |
|
|
|
| |
Instead of fetching the raw account data and re-parsing it. The
ignored_users table is a denormalised version of the account data
for quick searching.
|
| |
|
|
|
|
| |
Also convert `ReadWriteLock` to use async context managers.
Signed-off-by: Sean Quah <seanq@element.io>
|
| | |
|
| | |
|
| |
|
| |
Fixes https://github.com/matrix-org/synapse/issues/12205
|
| | |
|
| |
|
|
| |
The unstable identifiers are still supported if the experimental configuration
flag is enabled. The unstable identifiers will be removed in a future release.
|
| |
|
|
|
|
| |
Since the object it returns is a ReplicationCommandHandler.
This is clean-up from adding support to Redis where the command handler
was added as an additional layer of abstraction from the TCP protocol.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
deactivate a user (#12028)
* Add check_can_deactivate_user
* Add check_can_shutdown_rooms
* Documentation
* callbacks, not functions
* Various suggested tweaks
* Add tests for test_check_can_shutdown_room and test_check_can_deactivate_user
* Update check_can_deactivate_user to not take a Requester
* Fix check_can_shutdown_room docs
* Renegade and use `by_admin` instead of `admin_user_id`
* fix lint
* Update docs/modules/third_party_rules_callbacks.md
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
* Update docs/modules/third_party_rules_callbacks.md
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
* Update docs/modules/third_party_rules_callbacks.md
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
* Update docs/modules/third_party_rules_callbacks.md
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
|
| |
|
|
| |
We don't *have* the state at a backwards-extremity, so this is never going to
do anything useful.
|
| |
|
|
| |
Signed-off-by: Sean Quah <seanq@element.io>
|
| |
|
|
|
| |
This field is only to be used in the Server-Server API, and not the
Client-Server API, but was being leaked when a federation response
was used in the /hierarchy API.
|
| | |
|
| |
|
|
|
|
|
|
|
| |
If we locally generate a rejection for an invite received over federation, it
is stored as an outlier (because we probably don't have the state for the
room). However, currently we still generate a state group for it (even though
the state in that state group will be nonsense).
By setting the `outlier` param on `create_event`, we avoid the nonsensical
state.
|
| | |
|
| |
|
|
| |
This ensures that the `latest_event` field of the bundled aggregation
for threads uses the same format as the other events in the response.
|
| |
|
| |
There's no reason to let people use long keys.
|
| |
|
|
|
| |
As a str is a sequence, the checks were not granular
enough and would allow lists or strings, when only
lists were valid.
|
| |
|
|
| |
profile update (#12062)
|
| |
|
|
|
|
|
|
|
|
|
|
| |
When we get a partial_state response from send_join, store information in the
database about it:
* store a record about the room as a whole having partial state, and stash the
list of member servers too.
* flag the join event itself as having partial state
* also, for any new events whose prev-events are partial-stated, note that
they will *also* be partial-stated.
We don't yet make any attempt to interpret this data, so API calls (and a bunch
of other things) are just going to get incorrect data.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* fix incorrect unwrapFirstError import
this was being imported from the wrong place
* Refactor `concurrently_execute` to use `yieldable_gather_results`
* Improve exception handling in `yieldable_gather_results`
Try to avoid swallowing so many stack traces.
* mark unwrapFirstError deprecated
* changelog
|
| |
|
|
|
|
|
|
| |
...and various code supporting it.
The /spaces endpoint was from an old version of MSC2946 and included
both a Client-Server and Server-Server API. Note that the unstable
/hierarchy endpoint (from the final version of MSC2946) is not yet
removed.
|
| | |
|
| |
|
|
|
| |
These have snuck in since #12031 was started.
Also a couple of other cleanups while we're in the area.
|
| |
|
|
|
|
|
| |
The presence of this method was confusing, and mostly present for backwards
compatibility. Let's get rid of it.
Part of #11733
|
| |
|
|
|
| |
See matrix-org/matrix-doc#3720
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
|
| |
|
| |
... to ensure it gets a proper log context, mostly.
|
| |
|
| |
A follow-up to #12005, in which I apparently missed that there are a bunch of other places that assume the create event is in the auth chain.
|
| |
|
|
|
|
| |
These started failing in
https://github.com/matrix-org/synapse/pull/12031... I'm a bit mystified by how
they ever worked.
|
| | |
|
| |
|
| |
Upgrade mypy to 0.931, mypy-zope to 0.3.5 and fix new complaints.
|
| |
|
| |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
msc3706 proposes changing the `/send_join` response:
> Any events returned within `state` can be omitted from `auth_chain`.
Currently, we rely on `m.room.create` being returned in `auth_chain`, but since
the `m.room.create` event must necessarily be part of the state, the above
change will break this.
In short, let's look for `m.room.create` in `state` rather than `auth_chain`.
|
| |
|
|
|
|
|
| |
Initially introduced in matrix-org-hotfixes by e5537cf (and tweaked by later commits).
Fixes #11995
See also #4826
|
| |
|
|
|
|
| |
For users with large accounts it is inefficient to calculate the set of
users they share a room with (and takes a lot of space in the cache).
Instead we can look at users whose devices have changed since the last
sync and check if they share a room with the syncing user.
|
| |
|
|
|
| |
We already have two copies of this code, in 2/3 of the callers of
`_auth_and_persist_outliers`. Before I add a third, let's push it down.
|
| |
|
|
|
|
|
|
|
| |
Splits the search code into a few logical functions instead of a single
unreadable function.
There are also a few additional changes for readability.
After refactoring it was clear to see there were some unused and
unnecessary variables, which were simplified.
|
| |
|
| |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
| |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | |
|
| |
|
|
| |
(MSC3666) (#11837)
|
| |
|
|
| |
Twisted 22.1.0 fixed some internal type hints, allowing Synapse
to remove ignore calls for parameters to connectTCP.
|
| |
|
|
|
| |
Part of the Tchap Synapse mainlining.
This allows modules to implement extra logic to figure out whether a given 3PID can be added to the local homeserver. In the Tchap use case, this will allow a Synapse module to interface with the custom endpoint /internal_info.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(MSC2716) (#11114)
Fix https://github.com/matrix-org/synapse/issues/11091
Fix https://github.com/matrix-org/synapse/issues/10764 (side-stepping the issue because we no longer have to deal with `fake_prev_event_id`)
1. Made the `/backfill` response return messages in `(depth, stream_ordering)` order (previously only sorted by `depth`)
- Technically, it shouldn't really matter how `/backfill` returns things but I'm just trying to make the `stream_ordering` a little more consistent from the origin to the remote homeservers in order to get the order of messages from `/messages` consistent ([sorted by `(topological_ordering, stream_ordering)`](https://github.com/matrix-org/synapse/blob/develop/docs/development/room-dag-concepts.md#depth-and-stream-ordering)).
- Even now that we return backfilled messages in order, it still doesn't guarantee the same `stream_ordering` (and more importantly the [`/messages` order](https://github.com/matrix-org/synapse/blob/develop/docs/development/room-dag-concepts.md#depth-and-stream-ordering)) on the other server. For example, if a room has a bunch of history imported and someone visits a permalink to a historical message back in time, their homeserver will skip over the historical messages in between and insert the permalink as the next message in the `stream_order` and totally throw off the sort.
- This will be even more the case when we add the [MSC3030 jump to date API endpoint](https://github.com/matrix-org/matrix-doc/pull/3030) so the static archives can navigate and jump to a certain date.
- We're solving this in the future by switching to [online topological ordering](https://github.com/matrix-org/gomatrixserverlib/issues/187) and [chunking](https://github.com/matrix-org/synapse/issues/3785) which by its nature will apply retroactively to fix any inconsistencies introduced by people permalinking
2. As we're navigating `prev_events` to return in `/backfill`, we order by `depth` first (newest -> oldest) and now also tie-break based on the `stream_ordering` (newest -> oldest). This is technically important because MSC2716 inserts a bunch of historical messages at the same `depth` so it's best to be prescriptive about which ones we should process first. In reality, I think the code already looped over the historical messages as expected because the database is already in order.
3. Making the historical state chain and historical event chain float on their own by having no `prev_events` instead of a fake `prev_event` which caused backfill to get clogged with an unresolvable event. Fixes https://github.com/matrix-org/synapse/issues/11091 and https://github.com/matrix-org/synapse/issues/10764
4. We no longer find connected insertion events by finding a potential `prev_event` connection to the current event we're iterating over. We now solely rely on marker events which when processed, add the insertion event as an extremity and the federating homeserver can ask about it when time calls.
- Related discussion, https://github.com/matrix-org/synapse/pull/11114#discussion_r741514793
Before | After
--- | ---
 | 
#### Why aren't we sorting topologically when receiving backfill events?
> The main reason we're going to opt to not sort topologically when receiving backfill events is because it's probably best to do whatever is easiest to make it just work. People will probably have opinions once they look at [MSC2716](https://github.com/matrix-org/matrix-doc/pull/2716) which could change whatever implementation anyway.
>
> As mentioned, ideally we would do this but code necessary to make the fake edges but it gets confusing and gives an impression of “just whyyyy” (feels icky). This problem also dissolves with online topological ordering.
>
> -- https://github.com/matrix-org/synapse/pull/11114#discussion_r741517138
See https://github.com/matrix-org/synapse/pull/11114#discussion_r739610091 for the technical difficulties
|
| |
|
|
| |
parameter (#11911)
|
| | |
|
| | |
|
| | |
|
| |
|
| |
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |
|
|
|
|
| |
Only allow files which file size and content types match configured
limits to be set as avatar.
Most of the inspiration from the non-test code comes from matrix-org/synapse-dinsic#19
|
| |
|
|
|
|
| |
This is in the context of mainlining the Tchap fork of Synapse. Currently in Tchap usernames are derived from the user's email address (extracted from the UIA results, more specifically the m.login.email.identity step).
This change also exports the check_username method from the registration handler as part of the module API, so that a module can check if the username it's trying to generate is correct and doesn't conflict with an existing one, and fallback gracefully if not.
Co-authored-by: David Robertson <davidr@element.io>
|
| |
|
|
|
|
|
|
|
|
|
| |
This is some odds and ends found during the review of #11791
and while continuing to work in this code:
* Return attrs classes instead of dictionaries from some methods
to improve type safety.
* Call `get_bundled_aggregations` fewer times.
* Adds a missing assertion in the tests.
* Do not return empty bundled aggregations for an event (preferring
to not include the bundle at all, as the docstring states).
|
| |
|
|
|
|
|
| |
This is mostly motivated by the tchap use case, where usernames are automatically generated from the user's email address (in a way that allows figuring out the email address from the username). Therefore, it's an issue if we respond to requests on /register and /register/available with M_USER_IN_USE, because it can potentially leak email addresses (which include the user's real name and place of work).
This commit adds a flag to inhibit the M_USER_IN_USE errors that are raised both by /register/available, and when providing a username early into the registration process. This error will still be raised if the user completes the registration process but the username conflicts. This is particularly useful when using modules (https://github.com/matrix-org/synapse/pull/11790 adds a module callback to set the username of users at registration) or SSO, since they can ensure the username is unique.
More context is available in the PR that introduced this behaviour to synapse-dinsic: matrix-org/synapse-dinsic#48 - as well as the issue in the matrix-dinsic repo: matrix-org/matrix-dinsic#476
|
| |
|
|
|
| |
upon user deactivation. (#11621)
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
|
| |
whose key is prefixed with the user ID (#11788)
|
| | |
|
| |
|
|
| |
(#11770)
|
| |
|
|
| |
`FederationClient.get_room_hierarchy()` caches its return values, so
refactor the code to avoid modifying the returned room summary.
|
| |
|
|
|
|
| |
Per updates to MSC3440.
This is implement as a separate method since it needs to be cached
on a per-user basis, instead of a per-thread basis.
|
| |
|
|
|
|
|
| |
I've never found this terribly useful. I think it was added in the early days
of Synapse, without much thought as to what would actually be useful to log,
and has just been cargo-culted ever since.
Rather, it tends to clutter up debug logs with useless information.
|
| |
|
|
| |
filter appservice users. (#11675)
|
| |
|
|
| |
dictionary (#11576)
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
By returning all of the m.space.child state of the space, not just
the first 50. The number of rooms returned is still capped at 50.
For the federation API this implies that the requesting server will
need to individually query for any other rooms it is not joined to.
|
| |
|
|
|
|
|
|
| |
This makes the serialization of events synchronous (and it no
longer access the database), but we must manually calculate and
provide the bundled aggregations.
Overall this should cause no change in behavior, but is prep work
for other improvements.
|
| |
|
|
|
| |
error to be returned, not `M_UNKNOWN` (#11672)
Co-authored-by: reivilibre <olivier@librepush.net>
|
| |
|
|
| |
as per
https://github.com/matrix-org/synapse/pull/11532#discussion_r769123269
|
| |
|
|
|
|
|
| |
Fixes minor discrepancies between the /hierarchy endpoint described
in MSC2946 and the implementation.
Note that the changes impact the stable and unstable /hierarchy and
unstable /spaces endpoints for both client and federation APIs.
|
| |
|
| |
If we've never made a request to a remote homeserver, we should cache the response---even if the response is "this user has no devices".
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* `_auth_and_persist_outliers`: mark persisted events as outliers
Mark any events that get persisted via `_auth_and_persist_outliers` as, well,
outliers.
Currently this will be a no-op as everything will already be flagged as an
outlier, but I'm going to change that.
* `process_remote_join`: stop flagging as outlier
The events are now flagged as outliers later on, by `_auth_and_persist_outliers`.
* `send_join`: remove `outlier=True`
The events created here are returned in the result of `send_join` to
`FederationHandler.do_invite_join`. From there they are passed into
`FederationEventHandler.process_remote_join`, which passes them to
`_auth_and_persist_outliers`... which sets the `outlier` flag.
* `get_event_auth`: remove `outlier=True`
stop flagging the events returned by `get_event_auth` as outliers. This method
is only called by `_get_remote_auth_chain_for_event`, which passes the results
into `_auth_and_persist_outliers`, which will flag them as outliers.
* `_get_remote_auth_chain_for_event`: remove `outlier=True`
we pass all the events into `_auth_and_persist_outliers`, which will now flag
the events as outliers.
* `_check_sigs_and_hash_and_fetch`: remove unused `outlier` parameter
This param is now never set to True, so we can remove it.
* `_check_sigs_and_hash_and_fetch_one`: remove unused `outlier` param
This is no longer set anywhere, so we can remove it.
* `get_pdu`: remove unused `outlier` parameter
... and chase it down into `get_pdu_from_destination_raw`.
* `event_from_pdu_json`: remove redundant `outlier` param
This is never set to `True`, so can be removed.
* changelog
* update docstring
|
| |
|
|
|
|
|
|
|
|
|
| |
* Fix AssertionErrors after purging events
If you purged a bunch of events from your database, and then restarted synapse
without receiving more events, then you would get a bunch of AssertionErrors on
restart.
This fixes the situation by rewinding the stream processors.
* `check-newsfragment`: ignore deleted newsfiles
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Events returned by `backfill` should not be flagged as outliers.
Fixes:
```
AssertionError: null
File "synapse/handlers/federation.py", line 313, in try_backfill
dom, room_id, limit=100, extremities=extremities
File "synapse/handlers/federation_event.py", line 517, in backfill
await self._process_pulled_events(dest, events, backfilled=True)
File "synapse/handlers/federation_event.py", line 642, in _process_pulled_events
await self._process_pulled_event(origin, ev, backfilled=backfilled)
File "synapse/handlers/federation_event.py", line 669, in _process_pulled_event
assert not event.internal_metadata.is_outlier()
```
See https://sentry.matrix.org/sentry/synapse-matrixorg/issues/231992
Fixes #8894.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Push `get_room_{min,max_stream_ordering}` into StreamStore
Both implementations of this are identical, so we may as well push it down and
get rid of the abstract base class nonsense.
* Remove redundant `StreamStore` class
This is empty now
* Remove redundant `get_current_events_token`
This was an exact duplicate of `get_room_max_stream_ordering`, so let's get rid
of it.
* newsfile
|
| |
|
| |
To improve type hints throughout the code.
|
| |
|
|
| |
Both of those APIs return state events, which will not have bundled
aggregations added anyway.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Wrap `auth.get_user_by_req` in an opentracing span
give `get_user_by_req` its own opentracing span, since it can result in a
non-trivial number of sub-spans which it is useful to group together.
This requires a bit of reorganisation because it also sets some tags (and may
force tracing) on the servlet span.
* Emit opentracing span for encoding json responses
This can be a significant time sink.
* Rename all sync spans with a prefix
* Write an opentracing span for encoding sync response
* opentracing span to group generate_room_entries
* opentracing spans within sync.encode_response
* changelog
* Use the `trace` decorator instead of context managers
|
| |
|
|
|
| |
And make bundling aggregations opt-in, instead of opt-out to avoid
having APIs to include extraneous data (and being much heavier than
necessary).
|
| |
|
| |
This adds some opentracing annotations to ResponseCache, to make it easier to see what's going on; in particular, it adds a link back to the initial trace which is actually doing the work of generating the response.
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
| |
raising an exception. (#11565)
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
|
| |
|
|
|
| |
The event still needs to have `auth_events` defined to be valid.
Split out from https://github.com/matrix-org/synapse/pull/11114
|
| |
|
| |
C.f. https://github.com/matrix-org/synapse/pull/11494#pullrequestreview-827780886
|
| | |
|
| |
|
| |
And expand some type hints in the receipts storage module.
|
| | |
|
| |
|
|
|
|
|
|
| |
* Move sync_token up to the top
* Pull out _get_ignored_users
* Try to signpost the body of `_generate_sync_entry_for_rooms`
* Pull out _calculate_user_changes
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
| |
Fixes #11517
|
| |
|
|
|
| |
If, for some reason, we don't have the create event, we should still be able to
purge a room.
|
| | |
|
| |
|
| |
As a step towards allowing back-channel logout for OIDC.
|
| |
|
|
|
|
|
|
| |
Due to updates to MSC2675 this includes a few fixes:
* Include bundled aggregations for /sync.
* Do not include bundled aggregations for /initialSync and /events.
* Do not bundle aggregations for state events.
* Clarifies comments and variable names.
|
| |
|
|
| |
to refreshable access tokens. (#11445)
|
| |
|
|
|
| |
This mainly consists of docstrings and inline comments. There are one or two type annotations and variable renames thrown in while I was here.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
closest event to a given timestamp (#9445)
MSC3030: https://github.com/matrix-org/matrix-doc/pull/3030
Client API endpoint. This will also go and fetch from the federation API endpoint if unable to find an event locally or we found an extremity with possibly a closer event we don't know about.
```
GET /_matrix/client/unstable/org.matrix.msc3030/rooms/<roomID>/timestamp_to_event?ts=<timestamp>&dir=<direction>
{
"event_id": ...
"origin_server_ts": ...
}
```
Federation API endpoint:
```
GET /_matrix/federation/unstable/org.matrix.msc3030/timestamp_to_event/<roomID>?ts=<timestamp>&dir=<direction>
{
"event_id": ...
"origin_server_ts": ...
}
```
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| |
|
|
|
|
| |
This also makes additional updates where the implementation
had drifted from the approved MSC.
Unstable endpoints will be removed at a later data.
|
| |
|
|
| |
tokens. (#11428)
|
| |
|
|
| |
refresh tokens are in use. (#11425)
|
| |
|
|
| |
`refreshable_access_token_lifetime` to make it clear it only concerns refreshable access tokens. (#11388)
|
| | |
|
| |
|
|
|
|
|
|
| |
If `room_list_publication_rules` was configured with a rule with a
non-wildcard alias and a room was created with an alias then an
internal server error would have been thrown.
This fixes the error and properly applies the publication rules
during room creation.
|
| |
|
|
|
|
|
|
|
| |
`/transactions` (MSC2716) (#11265)
Mark historical state from the MSC2716 `/batch_send` endpoint as `historical` which makes it `backfilled` and have a negative `stream_ordering` so it doesn't get queried by `/transactions`.
Fix https://github.com/matrix-org/synapse/issues/11241
Complement tests: https://github.com/matrix-org/complement/pull/221
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`trust_identity_server_for_password_resets` config flag (#11333)
* remove code legacy code related to deprecated config flag "trust_identity_server_for_password_resets" from synapse/config/emailconfig.py
* remove legacy code supporting depreciated config flag "trust_identity_server_for_password_resets" from synapse/config/registration.py
* remove legacy code supporting depreciated config flag "trust_identity_server_for_password_resets" from synapse/handlers/identity.py
* add tests to ensure config error is thrown and synapse refuses to start when depreciated config flag is found
* add changelog
* slightly change behavior to only check for deprecated flag if set to 'true'
* Update changelog.d/11333.misc
Co-authored-by: reivilibre <oliverw@matrix.org>
Co-authored-by: reivilibre <oliverw@matrix.org>
|
| |
|
|
| |
(#11370)
|
| |
|
|
|
|
|
|
|
|
|
| |
Adds validation to the Client-Server API to ensure that
the potential thread head does not relate to another event
already. This results in not allowing a thread to "fork" into
other threads.
If the target event is unknown for some reason (maybe it isn't
visible to your homeserver), but is the target of other events
it is assumed that the thread can be created from it. Otherwise,
it is rejected as an unknown event.
|
| | |
|
| |
|
|
| |
`create_access_token_for_user_id` (#11369)
|
| |
|
|
|
| |
Different users may be allowed to see different rooms within a space,
so sharing responses between users is inadvisable.
|
| |
|
|
|
| |
providers (#11340)
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
| |
* Prefer `HTTPStatus` over plain `int`
This is an Opinion that no-one has seemed to object to yet.
* `--disallow-untyped-defs` for `tests.rest.client.test_directory`
* Improve synapse's annotations for deleting aliases
* Test case for deleting a room alias
* Changelog
|
| |
|
| |
Signed-off-by: Dirk Klimpel dirk@klimpel.org
|
| | |
|
| |
|
| |
as of #11012, these parameters are unused.
|
| |
|
| |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
|
| |
Co-authored-by: Dirk Klimpel <5740567+dklimpel@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| |
|
|
| |
Adds experimental support for `relation_types` and `relation_senders`
fields for filters.
|
| |
|
|
|
|
|
| |
time (#11234)
When fetching remote devices for the first time, we did not correctly include the cross signing keys in the returned results.
c.f. #11159
|
| |
|
|
|
| |
`get_insertion_event_by_batch_id` -> `get_insertion_event_id_by_batch_id`
Split out from https://github.com/matrix-org/synapse/pull/11114
|
| |
|
|
|
| |
We might as well use a default value for `public_baseurl` based on
`server_name` - in many cases, it will be correct.
|
| | |
|
| |
|
|
|
| |
(#11207)
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| |
|
|
| |
This makes the typing stream writer config match the other stream writers
that only currently support a single worker.
|
| | |
|
| |
|
|
|
| |
`_notify_app_services_ephemeral` (#11137)
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |
|
| |
Signed-off-by: Rafael Goncalves <rafaelgoncalves@riseup.net>
|
| |
|
| |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
|
| |
This avoids filtering against fields which cannot exist on an
event source. E.g. presence updates don't have a room.
|
| |
|
|
|
| |
Includes both the stable and unstable identifier to store-invite
calls to the identity server. In the future we should remove the
unstable identifier.
|
| |
|
| |
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| |
|
|
|
| |
Introduced in #10548
See https://github.com/matrix-org/synapse-email-account-validity/runs/3979337154?check_suite_focus=true for an example of a module's CI choking over this issue.
|
| |
|
|
|
|
| |
Fixes: #10929
Signed-off-by: Andrew Ferrazzutti <fair@miscworks.net>
|
| |
|
|
|
|
|
| |
This is the final piece of the jigsaw for #9595. As with other changes before this one (eg #10771), we need to make sure that we auth the auth events in the right order, and actually check that their predecessors haven't been rejected.
To do this I've reused the existing code we use when persisting outliers elsewhere.
I've removed the code for attempting to fetch missing auth_events - the events should have been present in the send_join response, so the likely reason they are missing is that we couldn't verify them, so requesting them again is unlikely to help. Instead, we simply drop any state which relies on those auth events, as we do at a backwards-extremity. See also matrix-org/complement#216 for a test for this.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
room (#11143)
* We only need to fetch users in private rooms
* Filter out `user_id` at the top
* Discard excluded users in the top loop
We weren't doing this in the "First, if they're our user" branch so this
is a bugfix.
* The caller must check that `user_id` is included
This is in the docstring. There are two call sites:
- one in `_handle_room_publicity_change`, which explicitly checks before calling;
- and another in `_handle_room_membership_event`, which returns early if
the user is excluded.
So this change is safe.
* Test joining a private room with an excluded user
* Tweak an existing test
* Changelog
* test docstring
* lint
|
| |
|
|
| |
services (#11138)
|
| |
|
| |
Signed-off-by: Robert Edström <github@legogris.se>
|
| |
|
| |
Remove some redundant code, and generally simplify.
|
| |\ |
|
| | |
| |
| |
| |
| |
| |
| |
| | |
users limit (#11127)
Temporarily revert "Add functionality to remove deactivated users from the monthly_active_users table (#10947)".
This reverts commit eda8c88b84ee7506379a71ac2a7a88c08b759d43.
|
| | |
| |
| |
| |
| | |
This is just a lift-and-shift, because it fits more naturally here. We do
rename it to `process_remote_join` at the same time though.
|
| | |
| |
| |
| | |
... to `_auth_and_persist_outliers`, since that reflects its purpose better.
|
| | |
| |
| |
| | |
* Convert UserPresenceState to attrs.
* Remove args/kwargs from error classes and explicitly pass msg/errorcode.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Currently, when we receive an event whose auth_events differ from those we expect, we state-resolve between the two state sets, and check that the event passes auth based on the resolved state.
This means that it's possible for us to accept events which don't pass auth at their declared auth_events (or where the auth events themselves were rejected), leading to problems down the line like #10083.
This change means we will:
* ignore any events where we cannot find the auth events
* reject any events whose auth events were rejected
* reject any events which do not pass auth at their declared auth_events.
Together with a whole raft of previous work, this is a partial fix to #9595.
Fixes #6643.
Based on #11009.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This fixes a bug where we would accept an event whose `auth_events` include
rejected events, if the rejected event was shadowed by another `auth_event`
with same `(type, state_key)`.
The approach is to pass a list of auth events into
`check_auth_rules_for_event` instead of a dict, which of course means updating
the call sites.
This is an extension of #10956.
|
| | |
| |
| |
| |
| | |
Make sure that we correctly handle rooms where we do not yet have a
`min_depth`, and also add some comments and logging.
|
| | | |
|
| | |
| |
| | |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
extremities (#11027)
Found while working on the Gitter backfill script and noticed
it only happened after we sent 7 batches, https://gitlab.com/gitterHQ/webapp/-/merge_requests/2229#note_665906390
When there are more than 5 backward extremities for a given depth,
backfill will throw an error because we sliced the extremity list
to 5 but then try to iterate over the full list. This causes
us to look for state that we never fetched and we get a `KeyError`.
Before when calling `/messages` when there are more than 5 backward extremities:
```
Traceback (most recent call last):
File "/usr/local/lib/python3.8/site-packages/synapse/http/server.py", line 258, in _async_render_wrapper
callback_return = await self._async_render(request)
File "/usr/local/lib/python3.8/site-packages/synapse/http/server.py", line 446, in _async_render
callback_return = await raw_callback_return
File "/usr/local/lib/python3.8/site-packages/synapse/rest/client/room.py", line 580, in on_GET
msgs = await self.pagination_handler.get_messages(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/pagination.py", line 396, in get_messages
await self.hs.get_federation_handler().maybe_backfill(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 133, in maybe_backfill
return await self._maybe_backfill_inner(room_id, current_depth, limit)
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 386, in _maybe_backfill_inner
likely_extremeties_domains = get_domains_from_state(states[e_id])
KeyError: '$zpFflMEBtZdgcMQWTakaVItTLMjLFdKcRWUPHbbSZJl'
```
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
(MSC2716) (#10975)
Resolve and share `state_groups` for all historical events in batch. This also helps for showing the appropriate avatar/displayname in Element and will work whenever `/messages` has one of the historical messages as the first message in the batch.
This does have the flaw where if you just insert a single historical event somewhere, it probably won't resolve the state correctly from `/messages` or `/context` since it will grab a non historical event above or below with resolved state which never included the historical state back then. For the same reasions, this also does not work in Element between the transition from actual messages to historical messages. In the Gitter case, this isn't really a problem since all of the historical messages are in one big lump at the beginning of the room.
For a future iteration, might be good to look at `/messages` and `/context` to additionally add the `state` for any historical messages in that batch.
---
How are the `state_groups` shared? To illustrate the `state_group` sharing, see this example:
**Before** (new `state_group` for every event 😬, very inefficient):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$_JXfwUDIWS6xKGG4SmZXjSFrizhARM7QblhATVWWUcA state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$1ZBfmBKEjg94d-vGYymKrVYeghwBOuGJ3wubU1-I9y0 state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$Mq2JvRetTyclPuozRI682SAjYp3GqRuPc8_cH5-ezPY state_group=10
create_new_client_event m.room.message event=$MfmY4rBQkxrIp8jVwVMTJ4PKnxSigpG9E2cn7S0AtTo state_group=11
create_new_client_event m.room.message event=$uYOv6V8wiF7xHwOMt-60d1AoOIbqLgrDLz6ZIQDdWUI state_group=12
create_new_client_event m.room.message event=$PAbkJRMxb0bX4A6av463faiAhxkE3FEObM1xB4D0UG4 state_group=13
create_new_client_event org.matrix.msc2716.batch event=$Oy_S7AWN7rJQe_MYwGPEy6RtbYklrI-tAhmfiLrCaKI state_group=14
```
**After** (all events in batch sharing `state_group=10`) (the base insertion event has `state_group=8` which matches the `prev_event` we're inserting next to):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$PWomJ8PwENYEYuVNoG30gqtybuQQSZ55eldBUSs0i0U state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$e_mCU7Eah9ABF6nQU7lu4E1RxIWccNF05AKaTT5m3lw state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$ui7A3_GdXIcJq0C8GpyrF8X7B3DTjMd_WGCjogax7xU state_group=10
create_new_client_event m.room.message event=$EnTIM5rEGVezQJiYl62uFBl6kJ7B-sMxWqe2D_4FX1I state_group=10
create_new_client_event m.room.message event=$LGx5jGONnBPuNhAuZqHeEoXChd9ryVkuTZatGisOPjk state_group=10
create_new_client_event m.room.message event=$wW0zwoN50lbLu1KoKbybVMxLbKUj7GV_olozIc5i3M0 state_group=10
create_new_client_event org.matrix.msc2716.batch event=$5ZB6dtzqFBCEuMRgpkU201Qhx3WtXZGTz_YgldL6JrQ state_group=10
```
|
| | |
| |
| |
| |
| | |
* Pull out `_handle_room_membership_event`
* Discard excluded users early
* Rearrange logic so the change is membership is effectively switched over. See PR for rationale.
|
| | |
| |
| | |
Except `synapse/events/__init__.py`, which will be done in a follow-up.
|
| | |
| |
| |
| |
| |
| | |
interface (#10548)
Co-authored-by: Azrenbeth <7782548+Azrenbeth@users.noreply.github.com>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
|
| |/ |
|
| | |
|
| |
|
| |
This splits apart `handle_new_user` into a function which adds an entry to the `user_directory` and a function which updates the room sharing tables. I plan to continue doing more of this kind of refactoring to clarify the implementation.
|
| |
|
|
|
|
|
|
| |
The shared ratelimit function was replaced with a dedicated
RequestRatelimiter class (accessible from the HomeServer
object).
Other properties were copied to each sub-class that inherited
from BaseHandler.
|
| |
|
|
|
| |
nickname (#11002)
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
| |
Include the event ids being peristed
|
| | |
|
| |
|
|
|
| |
This is in the context of creating new module callbacks that modules in https://github.com/matrix-org/synapse-dinsic can use, in an effort to reconcile the spam checker API in synapse-dinsic with the one in mainline.
Note that a module callback already exists for 3pid invites (https://matrix-org.github.io/synapse/develop/modules/third_party_rules_callbacks.html#check_threepid_can_be_invited) but it doesn't check whether the sender of the invite is allowed to send it.
|
| |
|
|
|
|
| |
This removes the magic allowing accessing configurable
variables directly from the config object. It is now required
that a specific configuration class is used (e.g. `config.foo`
must be replaced with `config.server.foo`).
|
| |
|
| |
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| |
|
|
|
|
|
|
|
| |
Fix a long-standing bug where a batch of user directory changes would be
silently dropped if the server left a room early in the batch.
* Pull out `wait_for_background_update` in tests
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
versions (#10962)
We correctly allowed using the MSC2716 batch endpoint for
the room creator in existing room versions but accidentally didn't track
the events because of a logic flaw.
This prevented you from connecting subsequent chunks together because it would
throw the unknown batch ID error.
We only want to process MSC2716 events when:
- The room version supports MSC2716
- Any room where the homeserver has the `msc2716_enabled` experimental feature enabled and the event is from the room creator
|
| |
|
|
|
| |
`_check_event_auth` is only called in two places, and only one of those sets
`send_on_behalf_of`. Warming the cache isn't really part of auth anyway, so
moving it out makes a lot more sense.
|
| |
|
| |
Add some more comments about wtf is going on here.
|
| |
|
|
|
|
| |
There's little point in doing a fancy state reconciliation dance if the event
itself is invalid.
Likewise, there's no point checking it again in `_check_for_soft_fail`.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
table (#10947)
* add test
* add function to remove user from monthly active table in deactivate code
* add function to remove user from monthly active table
* add changelog entry
* update changelog number
* requested changes
* update docstring on new function
* fix lint error
* Update synapse/storage/databases/main/monthly_active_users.py
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Introduce `should_include_local_users_in_dir`
We exclude three kinds of local users from the user_directory tables. At
present we don't consistently exclude all three in the same places. This
commit introduces a new function to gather those exclusion conditions
together. Because we have to handle local and remote users in different
ways, I've made that function only consider the case of remote users.
It's the caller's responsibility to make the local versus remote
distinction clear and correct.
A test fixup is required. The test now hits a path which makes db
queries against the users table. The expected rows were missing, because
we were using a dummy user that hadn't actually been registered.
We also add new test cases to covert the exclusion logic.
----
By my reading this makes these changes:
* When an app service user registers or changes their profile, they will
_not_ be added to the user directory. (Previously only support and
deactivated users were excluded). This is consistent with the logic that
rebuilds the user directory. See also [the discussion
here](https://github.com/matrix-org/synapse/pull/10914#discussion_r716859548).
* When rebuilding the directory, exclude support and disabled users from
room sharing tables. Previously only appservice users were excluded.
* Exclude all three categories of local users when rebuilding the
directory. Previously `_populate_user_directory_process_users` didn't do
any exclusion.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| | |
|
| |
|
|
| |
Uses `override_config` and fixes test_auto_create_auto_join_where_no_consent
to properly configure auto-join rooms.
|
| |
|
|
|
|
|
| |
it. (#10933)
This fixes a "Event not signed by authorising server" error when
transition room member from join -> join, e.g. when updating a
display name or avatar URL for restricted rooms.
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.44.0rc2 (2021-09-30)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.44.0rc1 which caused the experimental [MSC2716](https://github.com/matrix-org/matrix-doc/pull/2716) `/batch_send` endpoint to return a 500 error. ([\#10938](https://github.com/matrix-org/synapse/issues/10938))
- Fix a bug introduced in v1.44.0rc1 which prevented sending presence events to application services. ([\#10944](https://github.com/matrix-org/synapse/issues/10944))
Improved Documentation
----------------------
- Minor updates to the installation instructions. ([\#10919](https://github.com/matrix-org/synapse/issues/10919))
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
Fix event context for outlier causing failures in all of the MSC2716
Complement tests.
The `EventContext.for_outlier` refactor happened in
https://github.com/matrix-org/synapse/pull/10883
and this spot was left out.
|
| | |
| |
| |
| | |
annotations) (#10944)
|
| | |
| |
| |
| |
| |
| |
| | |
This follows a correction made in twisted/twisted#1664 and should fix our Twisted Trial CI job.
Until that change is in a twisted release, we'll have to ignore the type
of the `host` argument. I've raised #10899 to remind us to review the
issue in a few months' time.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Broadly, the existing `event_auth.check` function has two parts:
* a validation section: checks that the event isn't too big, that it has the rught signatures, etc.
This bit is independent of the rest of the state in the room, and so need only be done once
for each event.
* an auth section: ensures that the event is allowed, given the rest of the state in the room.
This gets done multiple times, against various sets of room state, because it forms part of
the state res algorithm.
Currently, this is implemented with `do_sig_check` and `do_size_check` parameters, but I think
that makes everything hard to follow. Instead, we split the function in two and call each part
separately where it is needed.
|
| | | |
|
| | |
| |
| | |
Various refactors to use `RoomVersion` objects instead of room version identifiers.
|
| | |
| |
| |
| |
| |
| |
| |
| | |
between batches (MSC2716) (#10877)
Part of [MSC2716](https://github.com/matrix-org/matrix-doc/pull/2716)
Part of https://github.com/matrix-org/synapse/issues/10737
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Inline `_check_event_auth` for outliers
When we are persisting an outlier, most of `_check_event_auth` is redundant:
* `_update_auth_events_and_context_for_auth` does nothing, because the
`input_auth_events` are (now) exactly the event's auth_events,
which means that `missing_auth` is empty.
* we don't care about soft-fail, kicking guest users or `send_on_behalf_of`
for outliers
... so the only thing that matters is the auth itself, so let's just do that.
* `_auth_and_persist_fetched_events_inner`: de-async `prep`
`prep` no longer calls any `async` methods, so let's make it synchronous.
* Simplify `_check_event_auth`
We no longer need to support outliers here, which makes things rather simpler.
* changelog
* lint
|
| |/
|
|
|
|
| |
By using attrs instead of dicts to store configuration.
Also updates some of the attrs classes to use proper type
hints and auto_attribs.
|
| |
|
|
|
|
|
| |
(#10898)
This is in the context of creating new module callbacks that modules in https://github.com/matrix-org/synapse-dinsic can use, in an effort to reconcile the spam checker API in synapse-dinsic with the one in mainline.
This adds a callback that's fairly similar to user_may_create_room except it also allows processing based on the invites sent at room creation.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Factor more stuff out of `_get_events_and_persist`
It turns out that the event-sorting algorithm in `_get_events_and_persist` is
also useful in other circumstances. Here we move the current
`_auth_and_persist_fetched_events` to `_auth_and_persist_fetched_events_inner`,
and then factor the sorting part out to `_auth_and_persist_fetched_events`.
* `_get_remote_auth_chain_for_event`: remove redundant `outlier` assignment
`get_event_auth` returns events with the outlier flag already set, so this is
redundant (though we need to update a test where `get_event_auth` is mocked).
* `_get_remote_auth_chain_for_event`: move existing-event tests earlier
Move a couple of tests outside the loop. This is a bit inefficient for now, but
a future commit will make it better. It should be functionally identical.
* `_get_remote_auth_chain_for_event`: use `_auth_and_persist_fetched_events`
We can use the same codepath for persisting the events fetched as part of an
auth chain as for those fetched individually by `_get_events_and_persist` for
building the state at a backwards extremity.
* `_get_remote_auth_chain_for_event`: use a dict for efficiency
`_auth_and_persist_fetched_events` sorts the events itself, so we no longer
need to care about maintaining the ordering from `get_event_auth` (and no
longer need to sort by depth in `get_event_auth`).
That means that we can use a map, making it easier to filter out events we
already have, etc.
* changelog
* `_auth_and_persist_fetched_events`: improve docstring
|
| |
|
|
|
| |
Combine the two loops over the list of events, and hence get rid of
`_NewEventInfo`. Also pass the event back alongside the context, so that it's
easier to process the result.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`_update_auth_events_and_context_for_auth` (#10884)
* Reload auth events from db after fetching and persisting
In `_update_auth_events_and_context_for_auth`, when we fetch the remote auth
tree and persist the returned events: load the missing events from the database
rather than using the copies we got from the remote server.
This is mostly in preparation for additional refactors, but does have an
advantage in that if we later get around to checking the rejected status, we'll
be able to make use of it.
* Factor out `_get_remote_auth_chain_for_event` from `_update_auth_events_and_context_for_auth`
* changelog
|
| | |
|
| |
|
|
|
| |
Co-authored-by: Dirk Klimpel <5740567+dklimpel@users.noreply.github.com>
Co-authored-by: reivilibre <olivier@librepush.net>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |
|
|
|
|
|
|
| |
This avoids the overhead of searching through the various
configuration classes by directly referencing the class that
the attributes are in.
It also improves type hints since mypy can now resolve the
types of the configuration variables.
|
| | |
|
| |
|
|
|
|
| |
Constructing an EventContext for an outlier is actually really simple, and
there's no sense in going via an `async` method in the `StateHandler`.
This also means that we can resolve a bunch of FIXMEs.
|
| | |
|
| |
|
|
|
|
|
|
| |
endpoint (#10838)
See https://github.com/matrix-org/matrix-doc/pull/2716#discussion_r684574497
Dropping support for older MSC2716 room versions so we don't have to worry about
supporting both chunk and batch events.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's a simplification, but one that'll help make the user directory logic easier
to follow with the other changes upcoming. It's not strictly required for those
changes, but this will help simplify the resulting logic that listens for
`m.room.member` events and generally make the logic easier to follow.
This means the config option `search_all_users` ends up controlling the
search query only, and not the data we store. The cost of doing so is an
extra row in the `user_directory` and `user_directory_search` tables for
each local user which
- belongs to no public rooms
- belongs to no private rooms of size ≥ 2
I think the cost of this will be marginal (since they'll already have entries
in `users` and `profiles` anyway).
As a small upside, a homeserver whose directory was built with this
change can toggle `search_all_users` without having to rebuild their
directory.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |
|
|
|
| |
* Allow membership event to unban user
Signed-off-by: Aaron Raimist <aaron@raim.ist>
|
| |
|
|
|
|
|
| |
Adds missing type hints to methods in the synapse.handlers
module and requires all methods to have type hints there.
This also removes the unused construct_auth_difference method
from the FederationHandler.
|
| |\ |
|
| | |
| |
| |
| |
| | |
We added a bunch of spans in #10704, but this ended up adding a lot of
redundant spans for rooms where nothing changed, so instead we only
start the span if there might be something interesting going on.
|
| | | |
|
| |/
|
|
|
|
| |
I had one of these error messages yesterday and assumed it was an
invalid auth token (because that was an HTTP query parameter in the
test) I was working on. In fact, it was an invalid next batch token for
syncing.
|
| |
|
|
| |
Instead of proxying through the magic getter of the RootConfig
object. This should be more performant (and is more explicit).
|
| | |
|
| |
|
|
|
| |
By copying the `room_type` field of the create event and
migrating any non-empty `m.space.child` events to the
new room that is created.
|
| |
|
| |
No functional changes here. This came out as I was working to tackle #5677
|
| |
|
|
|
|
| |
Fixes #10732: consent flow skipped during SSO user registration if username is left at default
Signed-off-by: Andrew Ferrazzutti fair@miscworks.net
|
| |
|
|
|
| |
option (#10693)
Signed-off-by: Sean Quah <seanq@element.io>
|
| |
|
| |
This is only called in two places, and the code seems much clearer without it.
|
| | |
|
| |
|
|
| |
I think I have finally teased apart the codepaths which handle outliers, and those that handle non-outliers.
Let's add some assertions to demonstrate my newfound knowledge.
|
| |
|
|
|
|
|
| |
If we're persisting an event E which has auth_events A1, A2, then we ought to make sure that we correctly auth
and persist A1 and A2, before we blindly accept E.
This PR does part of that - it persists the auth events first - but it does not fully solve the problem, because we
still don't check that the auth events weren't rejected.
|
| |
|
|
|
|
|
|
|
| |
The full event content cannot be trusted from this API (as no auth
chain, etc.) is processed over federation. Returning the full event
content was a bug as MSC2946 specifies that only the stripped
state should be returned.
This also avoids calculating aggregations / annotations which go
unused.
|
| | |
|
| | |
|
| |
|
|
| |
It's now only used in a couple of places, so we can drop it altogether.
|
| |
|
| |
This is part of my ongoing war against BaseHandler. I've moved kick_guest_users into RoomMemberHandler (since it calls out to that handler anyway), and split maybe_kick_guest_users into the two places it is called.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(#10566)
* Allow room creator to send MSC2716 related events in existing room versions
Discussed at https://github.com/matrix-org/matrix-doc/pull/2716/#discussion_r682474869
Restoring `get_create_event_for_room_txn` from,
https://github.com/matrix-org/synapse/pull/10245/commits/44bb3f0cf5cb365ef9281554daceeecfb17cc94d
* Add changelog
* Stop people from trying to redact MSC2716 events in unsupported room versions
* Populate rooms.creator column for easy lookup
> From some [out of band discussion](https://matrix.to/#/!UytJQHLQYfvYWsGrGY:jki.re/$p2fKESoFst038x6pOOmsY0C49S2gLKMr0jhNMz_JJz0?via=jki.re&via=matrix.org), my plan is to use `rooms.creator`. But currently, we don't fill in `creator` for remote rooms when a user is invited to a room for example. So we need to add some code to fill in `creator` wherever we add to the `rooms` table. And also add a background update to fill in the rows missing `creator` (we can use the same logic that `get_create_event_for_room_txn` is doing by looking in the state events to get the `creator`).
>
> https://github.com/matrix-org/synapse/pull/10566#issuecomment-901616642
* Remove and switch away from get_create_event_for_room_txn
* Fix no create event being found because no state events persisted yet
* Fix and add tests for rooms creator bg update
* Populate rooms.creator field for easy lookup
Part of https://github.com/matrix-org/synapse/pull/10566
- Fill in creator whenever we insert into the rooms table
- Add background update to backfill any missing creator values
* Add changelog
* Fix usage
* Remove extra delta already included in #10697
* Don't worry about setting creator for invite
* Only iterate over rows missing the creator
See https://github.com/matrix-org/synapse/pull/10697#discussion_r695940898
* Use constant to fetch room creator field
See https://github.com/matrix-org/synapse/pull/10697#discussion_r696803029
* More protection from other random types
See https://github.com/matrix-org/synapse/pull/10697#discussion_r696806853
* Move new background update to end of list
See https://github.com/matrix-org/synapse/pull/10697#discussion_r696814181
* Fix query casing
* Fix ambiguity iterating over cursor instead of list
Fix `psycopg2.ProgrammingError: no results to fetch` error
when tests run with Postgres.
```
SYNAPSE_POSTGRES=1 SYNAPSE_TEST_LOG_LEVEL=INFO python -m twisted.trial tests.storage.databases.main.test_room
```
---
We use `txn.fetchall` because it will return the results as a
list or an empty list when there are no results.
Docs:
> `cursor` objects are iterable, so, instead of calling explicitly fetchone() in a loop, the object itself can be used:
>
> https://www.psycopg.org/docs/cursor.html#cursor-iterable
And I'm guessing iterating over a raw cursor does something weird when there are no results.
---
Test CI failure: https://github.com/matrix-org/synapse/pull/10697/checks?check_run_id=3468916530
```
tests.test_visibility.FilterEventsForServerTestCase.test_large_room
===============================================================================
[FAIL]
Traceback (most recent call last):
File "/home/runner/work/synapse/synapse/tests/storage/databases/main/test_room.py", line 85, in test_background_populate_rooms_creator_column
self.get_success(
File "/home/runner/work/synapse/synapse/tests/unittest.py", line 500, in get_success
return self.successResultOf(d)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/trial/_synctest.py", line 700, in successResultOf
self.fail(
twisted.trial.unittest.FailTest: Success result expected on <Deferred at 0x7f4022f3eb50 current result: None>, found failure result instead:
Traceback (most recent call last):
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 701, in errback
self._startRunCallbacks(fail)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 764, in _startRunCallbacks
self._runCallbacks()
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 858, in _runCallbacks
current.result = callback( # type: ignore[misc]
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 1751, in gotResult
current_context.run(_inlineCallbacks, r, gen, status)
--- <exception caught here> ---
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 1657, in _inlineCallbacks
result = current_context.run(
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/python/failure.py", line 500, in throwExceptionIntoGenerator
return g.throw(self.type, self.value, self.tb)
File "/home/runner/work/synapse/synapse/synapse/storage/background_updates.py", line 224, in do_next_background_update
await self._do_background_update(desired_duration_ms)
File "/home/runner/work/synapse/synapse/synapse/storage/background_updates.py", line 261, in _do_background_update
items_updated = await update_handler(progress, batch_size)
File "/home/runner/work/synapse/synapse/synapse/storage/databases/main/room.py", line 1399, in _background_populate_rooms_creator_column
end = await self.db_pool.runInteraction(
File "/home/runner/work/synapse/synapse/synapse/storage/database.py", line 686, in runInteraction
result = await self.runWithConnection(
File "/home/runner/work/synapse/synapse/synapse/storage/database.py", line 791, in runWithConnection
return await make_deferred_yieldable(
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 858, in _runCallbacks
current.result = callback( # type: ignore[misc]
File "/home/runner/work/synapse/synapse/tests/server.py", line 425, in <lambda>
d.addCallback(lambda x: function(*args, **kwargs))
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/enterprise/adbapi.py", line 293, in _runWithConnection
compat.reraise(excValue, excTraceback)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/python/deprecate.py", line 298, in deprecatedFunction
return function(*args, **kwargs)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/python/compat.py", line 404, in reraise
raise exception.with_traceback(traceback)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/enterprise/adbapi.py", line 284, in _runWithConnection
result = func(conn, *args, **kw)
File "/home/runner/work/synapse/synapse/synapse/storage/database.py", line 786, in inner_func
return func(db_conn, *args, **kwargs)
File "/home/runner/work/synapse/synapse/synapse/storage/database.py", line 554, in new_transaction
r = func(cursor, *args, **kwargs)
File "/home/runner/work/synapse/synapse/synapse/storage/databases/main/room.py", line 1375, in _background_populate_rooms_creator_column_txn
for room_id, event_json in txn:
psycopg2.ProgrammingError: no results to fetch
```
* Move code not under the MSC2716 room version underneath an experimental config option
See https://github.com/matrix-org/synapse/pull/10566#issuecomment-906437909
* Add ordering to rooms creator background update
See https://github.com/matrix-org/synapse/pull/10697#discussion_r696815277
* Add comment to better document constant
See https://github.com/matrix-org/synapse/pull/10697#discussion_r699674458
* Use constant field
|
| |
|
|
| |
Raises a 400 error instead of a 500 if an unknown preset is passed
from a client to create a room.
|
| |
|
|
| |
This avoids breaking the entire endpoint if a room with
an unsupported room version is encountered.
|
| |
|
|
|
|
|
|
|
| |
rooms. (#10730)
This updates the ordering of the returned events from the spaces
summary API to that defined in MSC2946 (which updates MSC1772).
Previously a step was skipped causing ordering to be inconsistent with
clients.
|
