| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
| |
Signed-off-by: Dan Callahan <danc@element.io>
|
| |
|
|
|
|
|
| |
Part of #9366
Adds in fixes for B006 and B008, both relating to mutable parameter lint errors.
Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>
|
| |
|
|
|
|
|
|
| |
(#9735)
When joining a room with join rules set to 'restricted', check if the
user is a member of the spaces defined in the 'allow' key of the join rules.
This only applies to an experimental room version, as defined in MSC3083.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
`room_invite_state_types` was inconvenient as a configuration setting, because
anyone that ever set it would not receive any new types that were added to the
defaults. Here, we deprecate the old setting, and replace it with a couple of
new settings under `room_prejoin_state`.
|
| |
|
|
|
|
|
| |
This should fix a class of bug where we forget to check if e.g. the appservice shouldn't be ratelimited.
We also check the `ratelimit_override` table to check if the user has ratelimiting disabled. That table is really only meant to override the event sender ratelimiting, so we don't use any values from it (as they might not make sense for different rate limits), but we do infer that if ratelimiting is disabled for the user we should disabled all ratelimits.
Fixes #9663
|
| |
|
|
|
|
|
|
|
| |
Running `dmypy run` will do a `mypy` check while spinning up a daemon
that makes rerunning `dmypy run` a lot faster.
`dmypy` doesn't support `follow_imports = silent` and has
`local_partial_types` enabled, so this PR enables those options and
fixes the issues that were newly raised. Note that `local_partial_types`
will be enabled by default in upcoming mypy releases.
|
| |
|
|
|
| |
When we hit an unknown room in the space tree, see if there are other servers that we might be able to poll to get the data.
Fixes: #9447
|
| | |
|
| |
|
|
|
| |
Builds on the work done in #9643 to add a federation API for space summaries.
There's a bit of refactoring of the existing client-server code first, to avoid too much duplication.
|
| | |
|
| | |
|
| |\ |
|
| | |
| |
| | |
This is very bare-bones for now: federation will come soon, while pagination is descoped for now but will come later.
|
| | | |
|
| | | |
|
| | | |
|
| |/ |
|
| |
|
|
|
| |
ones (#9634)
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| |
|
|
|
|
| |
We had two functions named `get_forward_extremities_for_room` and
`get_forward_extremeties_for_room` that took different paramters. We
rename one of them to avoid confusion.
|
| | |
|
| |
|
|
| |
Allows limiting who can login using OIDC via the claims
made from the IdP.
|
| |
|
|
|
| |
Instead of if the user does not have a password hash. This allows a SSO
user to add a password to their account, but only if the local password
database is configured.
|
| |
|
|
|
|
|
| |
Fixes https://github.com/matrix-org/synapse/issues/9572
When a SSO user logs in for the first time, we create a local Matrix user for them. This goes through the register_user flow, which ends up triggering the spam checker. Spam checker modules don't currently have any way to differentiate between a user trying to sign up initially, versus an SSO user (whom has presumably already been approved elsewhere) trying to log in for the first time.
This PR passes `auth_provider_id` as an argument to the `check_registration_for_spam` function. This argument will contain an ID of an SSO provider (`"saml"`, `"cas"`, etc.) if one was used, else `None`.
|
| |
|
|
|
| |
* Handle an empty cookie as an invalid macaroon.
* Newsfragment
|
| |
|
|
|
| |
The stable format uses different brand identifiers, so we need to support two
identifiers for each IdP.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Background: When we receive incoming federation traffic, and notice that we are missing prev_events from
the incoming traffic, first we do a `/get_missing_events` request, and then if we still have missing prev_events,
we set up new backwards-extremities. To do that, we need to make a `/state_ids` request to ask the remote
server for the state at those prev_events, and then we may need to then ask the remote server for any events
in that state which we don't already have, as well as the auth events for those missing state events, so that we
can auth them.
This PR attempts to optimise the processing of that state request. The `state_ids` API returns a list of the state
events, as well as a list of all the auth events for *all* of those state events. The optimisation comes from the
observation that we are currently loading all of those auth events into memory at the start of the operation, but
we almost certainly aren't going to need *all* of the auth events. Rather, we can check that we have them, and
leave the actual load into memory for later. (Ideally the federation API would tell us which auth events we're
actually going to need, but it doesn't.)
The effect of this is to reduce the number of events that I need to load for an event in Matrix HQ from about
60000 to about 22000, which means it can stay in my in-memory cache, whereas previously the sheer number
of events meant that all 60K events had to be loaded from db for each request, due to the amount of cache
churn. (NB I've already tripled the size of the cache from its default of 10K).
Unfortunately I've ended up basically C&Ping `_get_state_for_room` and `_get_events_from_store_or_dest` into
a new method, because `_get_state_for_room` is also called during backfill, which expects the auth events to be
returned, so the same tricks don't work. That said, I don't really know why that codepath is completely different
(ultimately we're doing the same thing in setting up a new backwards extremity) so I've left a TODO suggesting
that we clean it up.
|
| | |
|
| |
|
| |
Put the room id in the logcontext, to make it easier to understand what's going on.
|
| |
|
|
|
|
| |
... because namedtuples suck
Fix up a couple of other annotations to keep mypy happy.
|
| |
|
|
|
| |
We either need to pass the auth provider over the replication api, or make sure
we report the auth provider on the worker that received the request. I've gone
with the latter.
|
| |
|
|
| |
This uses a simplified version of get_chain_cover_difference to calculate
auth chain of events.
|
| |
|
|
|
| |
Apple had to be special. They want a client secret which is generated from an EC key.
Fixes #9220. Also fixes #9212 while I'm here.
|
| |
|
| |
Type hint fixes due to Twisted 21.2.0 adding type hints.
|
| | |
|
| |
|
|
|
| |
interfaces. (#9528)
This helps fix some type hints when running with Twisted 21.2.0.
|
| |
|
| |
Add prom metrics for number of users successfully registering and logging in, by SSO provider.
|
| |
|
| |
This great big stack of commits is a a whole load of hoop-jumping to make it easier to store additional values in login tokens, and then to actually store the SSO Identity Provider in the login token. (Making use of that data will follow in a subsequent PR.)
|
| |
|
|
|
| |
Prevent presence background jobs from running when presence is disabled
Signed-off-by: Aaron Raimist <aaron@raim.ist>
|
| |
|
|
|
|
|
| |
This reverts commit f5c93fc9931e4029bbd8000f398b6f39d67a8c46.
This is being backed out due to a regression (#9507) and additional
review feedback being provided.
|
| |
|
|
| |
This also pins the Twisted version in the mypy job for CI until
proper type hints are fixed throughout Synapse.
|
| | |
|
| |
|
|
|
|
|
| |
This fixes #8518 by adding a conditional check on `SyncResult` in a function when `prev_stream_token == current_stream_token`, as a sanity check. In `CachedResponse.set.<remove>()`, the result is immediately popped from the cache if the conditional function returns "false".
This prevents the caching of a timed-out `SyncResult` (that has `next_key` as the stream key that produced that `SyncResult`). The cache is prevented from returning a `SyncResult` that makes the client request the same stream key over and over again, effectively making it stuck in a loop of requesting and getting a response immediately for as long as the cache keeps those values.
Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(#9402)
This PR attempts to eliminate unnecessary presence sending work when your local server joins a room, or when a remote server joins a room your server is participating in by processing state deltas in chunks rather than individually.
---
When your server joins a room for the first time, it requests the historical state as well. This chunk of new state is passed to the presence handler which, after filtering that state down to only membership joins, will send presence updates to homeservers for each join processed.
It turns out that we were being a bit naive and processing each event individually, and sending out presence updates for every one of those joins. Even if many different joins were users on the same server (hello IRC bridges), we'd send presence to that same homeserver for every remote user join we saw.
This PR attempts to deduplicate all of that by processing the entire batch of state deltas at once, instead of only doing each join individually. We process the joins and note down which servers need which presence:
* If it was a local user join, send that user's latest presence to all servers in the room
* If it was a remote user join, send the presence for all local users in the room to that homeserver
We deduplicate by inserting all of those pending updates into a dictionary of the form:
```
{
server_name1: {presence_update1, ...},
server_name2: {presence_update1, presence_update2, ...}
}
```
Only after building this dict do we then start sending out presence updates.
|
| |
|
|
|
|
|
| |
Add off-by-default configuration settings to:
- disable putting an invitee's profile info in invite events
- disable profile lookup via federation
Signed-off-by: Andrew Ferrazzutti <fair@miscworks.net>
|
| |
|
|
|
|
| |
(#9428)
As the comment says, this guard was there for when the
initial user directory update has yet to happen.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a small bug that I noticed while working on #8956.
We have a for-loop which attempts to strip all presence changes for each user except for the final one, as we don't really care about older presence:
https://github.com/matrix-org/synapse/blob/9e19c6aab4b5a99039f2ddc7d3120dd3b26c274b/synapse/handlers/presence.py#L368-L371
`new_states_dict` stores this stripped copy of latest presence state for each user, before it is... put into a new variable `new_state`, which is just overridden by the subsequent for loop.
I believe this was instead meant to override `new_states`. Without doing so, it effectively meant:
1. The for loop had no effect.
2. We were still processing old presence state for users.
|
| |
|
| |
Apple want to POST the OIDC auth response back to us rather than using query-params; add the necessary support to make that work.
|
| |
|
| |
Fixes #9347
|
| |
|
|
|
|
|
| |
- Update black version to the latest
- Run black auto formatting over the codebase
- Run autoformatting according to [`docs/code_style.md
`](https://github.com/matrix-org/synapse/blob/80d6dc9783aa80886a133756028984dbf8920168/docs/code_style.md)
- Update `code_style.md` docs around installing black to use the correct version
|
| |
|
|
| |
Ensure that we lock correctly to prevent multiple concurrent metadata load
requests, and generally clean up the way we construct the metadata cache.
|
| | |
|
| |
|
|
|
| |
This PR removes a set that was created and [initially used](https://github.com/matrix-org/synapse/commit/1d2a0040cff8d04cdc7d7d09d8f04a5d628fa9dd#diff-0bc92da3d703202f5b9be2d3f845e375f5b1a6bc6ba61705a8af9be1121f5e42R435-R436), but is no longer today.
May help cut down a bit on the time it takes to accept invites.
|
| | |
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.27.0rc2 (2021-02-11)
==============================
Features
--------
- Further improvements to the user experience of registration via single sign-on. ([\#9297](https://github.com/matrix-org/synapse/issues/9297))
Bugfixes
--------
- Fix ratelimiting introduced in v1.27.0rc1 for invites to respect the `ratelimit` flag on application services. ([\#9302](https://github.com/matrix-org/synapse/issues/9302))
- Do not automatically calculate `public_baseurl` since it can be wrong in some situations. Reverts behaviour introduced in v1.26.0. ([\#9313](https://github.com/matrix-org/synapse/issues/9313))
Improved Documentation
----------------------
- Clarify the sample configuration for changes made to the template loading code. ([\#9310](https://github.com/matrix-org/synapse/issues/9310))
|
| | |
| |
| |
| | |
This breaks some people's configurations (if their Client-Server API
is not accessed via port 443).
|
| | | |
|
| |\ \
| | |
| | | |
New API /_synapse/admin/rooms/{roomId}/context/{eventId}
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | | |
Signed-off-by: David Teller <davidt@element.io>
|
| |\ \ \
| | |/
| |/| |
|
| | | | |
|
| | | | |
|
| | | | |
|
| |/ / |
|
| | |
| |
| |
| |
| | |
This could arguably replace the existing admin API for `/members`, however that is out of scope of this change.
This sort of endpoint is ideal for moderation use cases as well as other applications, such as needing to retrieve various bits of information about a room to perform a task (like syncing power levels between two places). This endpoint exposes nothing more than an admin would be able to access with a `select *` query on their database.
|
| | | |
|
| | | |
|
| |\ \ |
|
| | | | |
|
| | | |
| | |
| | | |
fixes #9171
|
| | | | |
|
| |\| | |
|
| | | |
| | |
| | |
| | |
| | | |
There's some prelimiary work here to pull out the construction of a jinja environment to a separate function.
I wanted to load the template at display time rather than load time, so that it's easy to update on the fly. Honestly, I think we should do this with all our templates: the risk of ending up with malformed templates is far outweighed by the improved turnaround time for an admin trying to update them.
|
| | | | |
|
| | | |
| | |
| | | |
There are going to be a couple of paths to get to the final step of SSO reg, and I want the URL in the browser to consistent. So, let's move the final step onto a separate path, which we redirect to.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
Context, Fixes: https://github.com/matrix-org/synapse/issues/9263
In the past to fix an issue with old Riots re-requesting threepid validation tokens, we raised a `LoginError` during UIA instead of `InteractiveAuthIncompleteError`. This is now breaking the way Tchap logs in - which isn't standard, but also isn't disallowed by the spec.
An easy fix is just to remove the 4 year old workaround.
|
| | | | |
|
| |\| | |
|
| | | |
| | |
| | |
| | |
| | |
| | | |
We've decided to add a 'brand' field to help clients decide how to style the
buttons.
Also, fix up the allowed characters for idp_id, while I'm in the area.
|
| | | | |
|
| | | | |
|
| | |/
|/|
| | |
This finishes adding type hints to the `synapse.handlers` module.
|
| |\| |
|
| | |
| |
| | |
Fixes #8928.
|
| | |
| |
| |
| | |
With this change all handlers except the e2e_* ones have
type hints enabled.
|
| | |
| |
| |
| | |
The current configuration is handled for backwards compatibility,
but is considered deprecated.
|
| |/ |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Factor out a common TestHtmlParser
Looks like I'm doing this in a few different places.
* Improve OIDC login test
Complete the OIDC login flow, rather than giving up halfway through.
* Ensure that OIDC login works with multiple OIDC providers
* Fix bugs in handling clientRedirectUrl
- don't drop duplicate query-params, or params with no value
- allow utf-8 in query-params
|
| |
|
|
| |
instance name. (#9130)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the final step for supporting multiple OIDC providers concurrently.
First of all, we reorganise the config so that you can specify a list of OIDC providers, instead of a single one. Before:
oidc_config:
enabled: true
issuer: "https://oidc_provider"
# etc
After:
oidc_providers:
- idp_id: prov1
issuer: "https://oidc_provider"
- idp_id: prov2
issuer: "https://another_oidc_provider"
The old format is still grandfathered in.
With that done, it's then simply a matter of having OidcHandler instantiate a new OidcProvider for each configured provider.
|
| |
|
|
|
| |
Again in preparation for handling more than one OIDC provider, add a new caveat to the macaroon used as an OIDC session cookie, which remembers which OIDC provider we are talking to. In future, when we get a callback, we'll need it to make sure we talk to the right IdP.
As part of this, I'm adding an idp_id and idp_name field to the OIDC configuration object. They aren't yet documented, and we'll just use the old values by default.
|
| |\
| |
| | |
Give the user a better error when they present bad SSO creds
|
| | |
| |
| |
| |
| | |
since we're hacking on this code anyway, may as well move it out of the
cluttered AuthHandler.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
If a user tries to do UI Auth via SSO, but uses the wrong account on the SSO
IdP, try to give them a better error.
Previously, the UIA would claim to be successful, but then the operation in
question would simply fail with "auth fail". Instead, serve up an error page
which explains the failure.
|
| |/
|
|
|
|
|
| |
The idea here is that we will have an instance of OidcProvider for each
configured IdP, with OidcHandler just doing the marshalling of them.
For now it's still hardcoded with a single provider.
|
| |
|
|
|
| |
Collect all the config options which related to an OIDC provider into a single
object.
|
| |
|
|
|
|
|
|
| |
Some light refactoring of OidcHandler, in preparation for bigger things:
* remove inheritance from deprecated BaseHandler
* add an object to hold the things that go into a session cookie
* factor out a separate class for manipulating said cookies
|
| |
|
| |
This only applies if the user's data is to be erased.
|
| |
|
|
|
|
|
| |
If we have integrations with multiple identity providers, when the user does a UI Auth, we need to redirect them to the right one.
There are a few steps to this. First of all we actually need to store the userid of the user we are trying to validate in the UIA session, since the /auth/sso/fallback/web request is unauthenticated.
Then, once we get the /auth/sso/fallback/web request, we can fish the user id out of the session, and use it to look up the external id mappings, and hence pick an SSO provider for them.
|
| |
|
| |
Homeserver.get_ip_from_request() used to be a bit more complicated, but now it is totally redundant. Let's get rid of it.
|
| |
|
|
|
|
|
|
|
|
|
| |
SynapseRequest is in danger of becoming a bit of a dumping-ground for "useful stuff relating to Requests",
which isn't really its intention (its purpose is to override render, finished and connectionLost to set up the
LoggingContext and write the right entries to the request log).
Putting utility functions inside SynapseRequest means that lots of our code ends up requiring a
SynapseRequest when there is nothing synapse-specific about the Request at all, and any old
twisted.web.iweb.IRequest will do. This increases code coupling and makes testing more difficult.
In short: move get_user_agent out to a utility function.
|
| | |
|
| |
|
| |
Currently `DeviceMessageHandler` only ever exists on master, but that is about to change.
|
| |
|
|
| |
These may be omitted if not set, but Synapse assumed they would
be in the response.
|
| |
|
|
| |
An experimental room version ("org.matrix.msc2176") contains
the new redaction rules for testing.
|
| |
|
|
|
| |
During login, if there are multiple IdPs enabled, offer the user a choice of
IdPs.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Implement CasHandler.handle_redirect_request
... to make it match OidcHandler and SamlHandler
* Clean up interface for OidcHandler.handle_redirect_request
Make it accept `client_redirect_url=None`.
* Clean up interface for `SamlHandler.handle_redirect_request`
... bring it into line with CAS and OIDC by making it take a Request parameter,
move the magic for `client_redirect_url` for UIA into the handler, and fix the
return type to be a `str` rather than a `bytes`.
* Define a common protocol for SSO auth provider impls
* Give SsoIdentityProvider an ID and register them
* Combine the SSO Redirect servlets
Now that the SsoHandler knows about the identity providers, we can combine the
various *RedirectServlets into a single implementation which delegates to the
right IdP.
* changelog
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
| |
This makes the CAS handler look more like the SAML/OIDC handlers:
* Render errors to users instead of throwing JSON errors.
* Internal reorganization.
|
| |
|
|
| |
Adds a new setting `email.invite_client_location` which, if defined, is
passed to the identity server during invites.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes #8876.
|
| | |
|
| |\ |
|
| | | |
|
| | |
| |
| |
| | |
If we see stale extremities while persisting events, and notice that
they don't change the result of state resolution, we drop them.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Fixes a bug that deactivated users appear in the directory when their profile information was updated.
To change profile information of deactivated users is neccesary for example you will remove displayname or avatar.
But they should not appear in directory. They are deactivated.
Co-authored-by: Erik Johnston <erikj@jki.re>
|
| | |
| |
| | |
This is another part of my work towards fixing #8876. It moves some of the logic currently in the SAML and OIDC handlers - in particular the call to `AuthHandler.complete_sso_login` down into the `SsoHandler`.
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* move simple_async_mock to test_utils
... so that it can be re-used
* Remove references to `SamlHandler._map_saml_response_to_user` from tests
This method is going away, so we can no longer use it as a test point. Instead,
factor out a higher-level method which takes a SAML object, and verify correct
behaviour by mocking out `AuthHandler.complete_sso_login`.
* changelog
|
| | | |
|
| | |
| |
| |
| | |
Spam checker modules can now provide async methods. This is implemented
in a backwards-compatible manner.
|
| | |
| |
| |
| | |
Fixes #8846.
|
| | |
| |
| | |
Fixes #8866
|
| | |
| |
| |
| |
| |
| |
| | |
* Factor out _call_attribute_mapper and _register_mapped_user
This is mostly an attempt to simplify `get_mxid_from_sso`.
* Move mapping_lock down into SsoHandler.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
* SsoHandler: remove inheritance from BaseHandler
* Simplify the flow for SSO UIA
We don't need to do all the magic for mapping users when we are doing UIA, so
let's factor that out.
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.24.0rc2 (2020-12-04)
==============================
Bugfixes
--------
- Fix a regression in v1.24.0rc1 which failed to allow SAML mapping providers which were unable to redirect users to an additional page. ([\#8878](https://github.com/matrix-org/synapse/issues/8878))
Internal Changes
----------------
- Add support for the `prometheus_client` newer than 0.9.0. Contributed by Jordan Bancino. ([\#8875](https://github.com/matrix-org/synapse/issues/8875))
|
| | |
| |
| |
| |
| | |
(#8878)
This was broken in #8801.
|
| |\ \
| | |
| | | |
UIA: offer only available auth flows
|
| | |/
| |
| |
| |
| |
| |
| | |
During user-interactive auth, do not offer password auth to users with no
password, nor SSO auth to users with no SSO.
Fixes #7559.
|
| |/
|
|
|
|
|
|
|
|
|
|
| |
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
|
| |
|
|
|
|
| |
This was broken in #8801 when abstracting code shared with OIDC.
After this change both SAML and OIDC have a concept of
grandfathering users, but with different implementations.
|
| | |
|
| |
|
|
| |
The idea here is to abstract out all the conditional code which tests which
methods a given password provider has, to provide a consistent interface.
|
| |
|
|
|
|
|
|
|
|
| |
The spec requires synapse to support `identifier` dicts for `m.login.password`
user-interactive auth, which it did not (instead, it required an undocumented
`user` parameter.)
To fix this properly, we need to pull the code that interprets `identifier`
into `AuthHandler.validate_login` so that it can be called from the UIA code.
Fixes #5665.
|
| |
|
| |
Fix a minor bug where we would offer "m.login.password" login if a custom auth provider supported it, even if password login was disabled.
|
| |
|
|
| |
This applies even if the feature is disabled at the server level with `allow_per_room_profiles`.
The server notice not being a real user it doesn't have an user profile.
|
| |
|
|
|
| |
(#8565)
Changes `@cache_in_self` to use underscore-prefixed attributes.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This is another PR that grew out of #6739.
The existing code for checking whether a user is currently invited to a room when they want to leave the room looks like the following:
https://github.com/matrix-org/synapse/blob/f737368a26bb9eea401fcc3a5bdd7e0b59e91f09/synapse/handlers/room_member.py#L518-L540
It calls `get_invite_for_local_user_in_room`, which will actually query *all* rooms the user has been invited to, before iterating over them and matching via the room ID. It will then return a tuple of a lot of information which we pull the event ID out of.
I need to do a similar check for knocking, but this code wasn't very efficient. I then tried to write a different implementation using `StateHandler.get_current_state` but this actually didn't work as we haven't *joined* the room yet - we've only been invited to it. That means that only certain tables in Synapse have our desired `invite` membership state. One of those tables is `local_current_membership`.
So I wrote a store method that just queries that table instead
|
| |
|
|
| |
Abstracts the SAML and OpenID Connect code which attempts to regenerate
the localpart of a matrix ID if it is already in use.
|
| |
|
|
|
| |
This also expands type-hints to the SSO and registration code.
Refactors the CAS code to more closely match OIDC/SAML.
|
| | |
|
| |
|
|
|
|
| |
Checks that the localpart returned by mapping providers for SAML and
OIDC are valid before registering new users.
Extends the OIDC tests for existing users and invalid data.
|
| |
|
|
| |
If the SAML metadata includes multiple IdPs it is necessary to
specify which IdP to redirect users to for authentication.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
* Consistently use room_id from federation request body
Some federation APIs have a redundant `room_id` path param (see
https://github.com/matrix-org/matrix-doc/issues/2330). We should make sure we
consistently use either the path param or the body param, and the body param is
easier.
* Kill off some references to "context"
Once upon a time, "rooms" were known as "contexts". I think this kills of the
last references to "contexts".
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
no stream_id is stored. (#8744)
* Make this line debug (it's noisy)
* Don't include from_key for presence if we are at 0
* Limit read receipts for all rooms to 100
* changelog.d/8744.bugfix
* Allow from_key to be None
* Update 8744.bugfix
* The from_key is superflous
* Update comment
|
| |
|
| |
De-duplicates code between the SAML and OIDC implementations.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
| |
`_locally_reject_invite` generates an out-of-band membership event which can be passed to clients, but not other homeservers.
This is used when we fail to reject an invite over federation. If this happens, we instead just generate a leave event locally and send it down /sync, allowing clients to reject invites even if we can't reach the remote homeserver.
A similar flow needs to be put in place for rescinding knocks. If we're unable to contact any remote server from the room we've tried to knock on, we'd still like to generate and store the leave event locally. Hence the need to reuse, and thus generalise, this method.
Separated from #6739.
|
| |
|
|
|
|
|
|
|
| |
There's a handy function called maybe_store_room_on_invite which allows us to create an entry in the rooms table for a room and its version for which we aren't joined to yet, but we can reference when ingesting events about.
This is currently used for invites where we receive some stripped state about the room and pass it down via /sync to the client, without us being in the room yet.
There is a similar requirement for knocking, where we will eventually do the same thing, and need an entry in the rooms table as well. Thus, reusing this function works, however its name needs to be generalised a bit.
Separated out from #6739.
|
| |
|
| |
Signed-off-by: Nicolai Søborg <git@xn--sb-lka.org>
|
| |
|
| |
Fixes #4042
|
| |
|
|
|
|
|
|
| |
This PR fixes two things:
* Corrects the copy/paste error of telling the client their displayname is wrong when they are submitting an `avatar_url`.
* Returns a `M_INVALID_PARAM` instead of `M_UNKNOWN` for non-str type parameters.
Reported by @t3chguy.
|
| |
|
|
|
|
|
|
|
|
| |
another user. (#8616)
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
|
| |
|
| |
Cached functions accept an `on_invalidate` function, which we failed to add to the type signature. It's rarely used in the files that we have typed, which is why we haven't noticed it before.
|
| |
|
|
|
| |
By not dropping the membership lock between invites, we can stop joins from
grabbing the lock when we're half-done and slowing the whole thing down.
|
| |\
| |
| | |
Fix serialisation errors when using third-party event rules.
|
| | |
| |
| |
| |
| |
| | |
Not being able to serialise `frozendicts` is fragile, and it's annoying to have
to think about which serialiser you want. There's no real downside to
supporting frozendicts, so let's just have one json encoder.
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This is a requirement for [knocking](https://github.com/matrix-org/synapse/pull/6739), and is abstracting some code that was originally used by the invite flow. I'm separating it out into this PR as it's a fairly contained change.
For a bit of context: when you invite a user to a room, you send them [stripped state events](https://matrix.org/docs/spec/server_server/unstable#put-matrix-federation-v2-invite-roomid-eventid) as part of `invite_room_state`. This is so that their client can display useful information such as the room name and avatar. The same requirement applies to knocking, as it would be nice for clients to be able to display a list of rooms you've knocked on - room name and avatar included.
The reason we're sending membership events down as well is in the case that you are invited to a room that does not have an avatar or name set. In that case, the client should use the displayname/avatar of the inviter. That information is located in the inviter's membership event.
This is optional as knocks don't really have any user in the room to link up to. When you knock on a room, your knock is sent by you and inserted into the room. It wouldn't *really* make sense to show the avatar of a random user - plus it'd be a data leak. So I've opted not to send membership events to the client here. The UX on the client for when you knock on a room without a name/avatar is a separate problem.
In essence this is just moving some inline code to a reusable store method.
|
| | |
| |
| | |
There's no point starting a background process when all its going to do is bail if federation isn't enabled.
|
| | |
| |
| |
| |
| |
| |
| | |
it seems to be possible that only one of them ends up to be cached.
when this was the case, the missing one was not fetched via federation,
and clients then failed to validate cross-signed devices.
Signed-off-by: Jonas Jelten <jj@sft.lol>
|
| | |
| |
| | |
This also fixes a bug by fixing handling of an account which doesn't expire.
|
| |\| |
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
Fixes #8520
Signed-off-by: Pavel Turinsky <pavel.turinsky@matfyz.cz>
Co-authored-by: Erik Johnston <erikj@jki.re>
|
| | |
| |
| |
| |
| |
| |
| | |
#8567 started a span for every background process. This is good as it means all Synapse code that gets run should be in a span (unless in the sentinel logging context), but it means we generate about 15x the number of spans as we did previously.
This PR attempts to reduce that number by a) not starting one for send commands to Redis, and b) deferring starting background processes until after we're sure they're necessary.
I don't really know how much this will help.
|
| | | |
|
| | | |
|
| |/ |
|
| | |
|
| | |
|
| | |
|
| |
|
| |
EventBuilder.build wants auth events these days
|
| |\
| |
| | |
Support modifying event content from ThirdPartyRules modules
|
| | |
| |
| |
| | |
Support returning a new event dict from `check_event_allowed`.
|
| | |
| |
| |
| |
| | |
Rather than waiting until we handle the event, call the ThirdPartyRules check
when we fist create the event.
|
| | |
| |
| |
| |
| | |
There's not much point in calling these *after* we have decided to accept them
into the DAG.
|
| | |
| |
| | |
Optionally sends typing, presence, and read receipt information to appservices.
|
| |\ \
| | |
| | | |
Simplify `_locally_reject_invite`
|
| | | |
| | |
| | |
| | |
| | | |
Update `EventCreationHandler.create_event` to accept an auth_events param, and
use it in `_locally_reject_invite` instead of reinventing the wheel.
|
| | |/
| |
| |
| | |
this is always the same as requester.access_token_id.
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(#8536)
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
|
| | |
|
| |
|
|
|
| |
(#8476)
Should fix #3365.
|
| | |
|
| |
|
|
|
| |
This PR allows Synapse modules making use of the `ModuleApi` to create and send non-membership events into a room. This can useful to have modules send messages, or change power levels in a room etc. Note that they must send event through a user that's already in the room.
The non-membership event limitation is currently arbitrary, as it's another chunk of work and not necessary at the moment.
|
| |
|
| |
All handlers now available via get_*_handler() methods on the HomeServer.
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
This allows a user to store an offline device on the server and
then restore it at a subsequent login.
|
| |\
| |
| | |
Reduce inconsistencies between codepaths for membership and non-membership events.
|
| | | |
|
| | |
| |
| |
| | |
This is now redundant, and we can just call `handle_new_client_event` directly.
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| | |
move the "duplicate state event" handling down into `handle_new_client_event`
where it can be shared between multiple call paths.
|
| | |
| |
| |
| |
| | |
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
|
| |/ |
|
| |
|
|
|
| |
This PR allows `ThirdPartyEventRules` modules to view, manipulate and block changes to the state of whether a room is published in the public rooms directory.
While the idea of whether a room is in the public rooms list is not kept within an event in the room, `ThirdPartyEventRules` generally deal with controlling which modifications can happen to a room. Public rooms fits within that idea, even if its toggle state isn't controlled through a state event.
|
| |
|
|
|
|
|
|
| |
There's no need for it to be in the dict as well as the events table. Instead,
we store it in a separate attribute in the EventInternalMetadata object, and
populate that on load.
This means that we can rely on it being correctly populated for any event which
has been persited to the database.
|
| |
|
|
| |
This fixes a bug where `m.ignored_user_list` was assumed to be a dict,
leading to odd behavior for users who set it to something else.
|
| | |
|
| |
|
| |
This allows for connecting to certain IdPs, e.g. GitLab.
|
| | |
|
| |
|
| |
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
|
| | |
|
| |\
| |
| | |
Report metrics on expensive rooms for state res
|
| | | |
|
| |/ |
|
| |
|
| |
For some reason, an apparently unrelated PR upset mypy about this module. Here are a number of little fixes.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Remove `on_timeout_cancel` from `timeout_deferred`
The `on_timeout_cancel` param to `timeout_deferred` wasn't always called on a
timeout (in particular if the canceller raised an exception), so it was
unreliable. It was also only used in one place, and to be honest it's easier to
do what it does a different way.
* Fix handling of connection timeouts in outgoing http requests
Turns out that if we get a timeout during connection, then a different
exception is raised, which wasn't always handled correctly.
To fix it, catch the exception in SimpleHttpClient and turn it into a
RequestTimedOutError (which is already a documented exception).
Also add a description to RequestTimedOutError so that we can see which stage
it failed at.
* Fix incorrect handling of timeouts reading federation responses
This was trapping the wrong sort of TimeoutError, so was never being hit.
The effect was relatively minor, but we should fix this so that it does the
expected thing.
* Fix inconsistent handling of `timeout` param between methods
`get_json`, `put_json` and `delete_json` were applying a different timeout to
the response body to `post_json`; bring them in line and test.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| | |
|
| |
|
|
|
|
|
| |
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
|
| |
|
| |
this makes it possible to use from the manhole, and seems cleaner anyway.
|
| |
|
|
|
|
|
|
|
| |
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
|
| | |
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.20.0rc5 (2020-09-18)
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
Instead of just using the most recent extremities let's pick the
ones that will give us results that the pagination request cares about,
i.e. pick extremities only if they have a smaller depth than the
pagination token.
This is useful when we fail to backfill an extremity, as we no longer
get stuck requesting that same extremity repeatedly.
|
| | |
| |
| |
| |
| |
| |
| | |
This converts calls like super(Foo, self) -> super().
Generated with:
sed -i "" -Ee 's/super\([^\(]+\)/super()/g' **/*.py
|
| | | |
|
| | |
| |
| |
| |
| | |
slots use less memory (and attribute access is faster) while slightly
limiting the flexibility of the class attributes. This focuses on objects
which are instantiated "often" and for short periods of time.
|
| | | |
|
| | |
| |
| |
| |
| |
| | |
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The idea here is that we pass the `max_stream_id` to everything, and only use the stream ID of the particular event to figure out *when* the max stream position has caught up to the event and we can notify people about it.
This is to maintain the distinction between the position of an item in the stream (i.e. event A has stream ID 513) and a token that can be used to partition the stream (i.e. give me all events after stream ID 352). This distinction becomes important when the tokens are more complicated than a single number, which they will be once we start tracking the position of multiple writers in the tokens.
The valid operations here are:
1. Is a position before or after a token
2. Fetching all events between two tokens
3. Merging multiple tokens to get the "max", i.e. `C = max(A, B)` means that for all positions P where P is before A *or* before B, then P is before C.
Future PR will change the token type to a dedicated type.
|
| | |
| |
| |
| |
| | |
Removes the `user_joined_room` and stops calling it since there are no observers.
Also cleans-up some other unused signals and related code.
|
