| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
|
| | |
|
| |
|
| |
this makes it possible to use from the manhole, and seems cleaner anyway.
|
| |
|
|
|
|
|
|
|
|
| |
I'd like to get a better insight into what we are doing with respect to state
res. The list of state groups we are resolving across should be short (if it
isn't, that's a massive problem in itself), so it should be fine to log it in
ite entiretly.
I've done some grepping and found approximately zero cases in which the
"shortcut" code delivered the result, so I've ripped that out too.
|
| | |
|
| |
|
| |
This will allow us to hit the DB after we've finished using the generated stream ID.
|
| | |
|
| |\
| |
| |
| |
| |
| |
| | |
When updating the `room_stats_state` table, we try to check for null bytes slipping in to the content for state events. It turns out we had added `guest_access` as a field to room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a `m.room.guest_access` event then breaks `room_stats_state` updates.
This PR adds the check for `guest_access`.
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When updating room_stats_state, we try to check for null bytes slipping
in to the
content for state events. It turns out we had added guest_access as a
field to
room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a m.room.guest_access event then breaks
room_stats_state
updates.
This PR adds the check for guest_access. A further PR will improve this
function so that this hopefully does not happen again in future.
|
| | |
| |
| | |
moves non-runtime dependencies out of synapse.python_dependencies (test and lint)
|
| |/
|
| |
This change adds a note and a few lines of configuration settings for Apache users to disable ModSecurity for Synapse's virtual hosts. With ModSecurity enabled and running with its default settings, Matrix clients are unable to send chat messages through the Synapse installation. With this change, ModSecurity can be disabled only for the Synapse virtual hosts.
|
| |
|
|
|
|
|
| |
Fixes: #8359
Trying to reactivate a user with the admin API (`PUT /_synapse/admin/v2/users/<user_name>`) causes an internal server error.
Seems to be a regression in #8033.
|
| |
|
| |
Add an admin API to read entries of table `event_reports`. API: `GET /_synapse/admin/v1/event_reports`
|
| |\ |
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
|
| | | |
|
| | | |
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.20.0rc5 (2020-09-18)
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
|
| | | |
|
| | | |
|
| | | |
|
| | |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
1.19.3
Synapse 1.19.3 (2020-09-18)
===========================
Bugfixes
--------
- Partially mitigate bug where newly joined servers couldn't get past
events in a room when there is a malformed event.
([\#8350](https://github.com/matrix-org/synapse/issues/8350))
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This is a bit of a hack, as `_check_sigs_and_hash_and_fetch` is intended
for attempting to pull an event from the database/(re)pull it from the
server that originally sent the event if checking the signature of the
event fails.
During backfill we *know* that we won't have the event in our database,
however it is still useful to be able to query the original sending
server as the server we're backfilling from may be acting maliciously.
The main benefit and reason for this change however is that
`_check_sigs_and_hash_and_fetch` will drop an event during backfill if
it cannot be successfully validated, whereas the current code will
simply fail the backfill request - resulting in the client's /messages
request silently being dropped.
This is a quick patch to fix backfilling rooms that contain malformed
events. A better implementation in planned in future.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Instead of just using the most recent extremities let's pick the
ones that will give us results that the pagination request cares about,
i.e. pick extremities only if they have a smaller depth than the
pagination token.
This is useful when we fail to backfill an extremity, as we no longer
get stuck requesting that same extremity repeatedly.
|
| | | | |
|
| | | |
| | |
| | |
| | | |
Add a new admin API `GET /_synapse/admin/v1/users/<user_id>/joined_rooms` to
list all rooms where a user is a member.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Fix _set_destination_retry_timings
This came about because the code assumed that retry_interval
could not be NULL — which has been challenged by catch-up.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
This converts calls like super(Foo, self) -> super().
Generated with:
sed -i "" -Ee 's/super\([^\(]+\)/super()/g' **/*.py
|
| | | |
| | |
| | |
| | |
| | | |
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | | | |
|
| |\| | |
|
| | | |
| | |
| | | |
c.f. #8295 for rationale
|
| | | |
| | |
| | | |
Dendrite's implementing MSC2753 over at https://github.com/matrix-org/dendrite/pull/1370 to prove the implementation for MSC purposes, and so sytest has sprouted tests for it over at https://github.com/matrix-org/sytest/pull/944. But we don't want them to run on synapse until synapse implements it.
|
| | | |
| | |
| | |
| | |
| | | |
Lint dependencies can now be installed with pip install -e ".[lint]"
This should help keep the version in sync between tox and documentation.
|
| | | | |
|
| | | |
| | |
| | | |
This reduces duplication of the admin prefix in regular expressions.
|
| | | |
| | |
| | | |
Replaced with less buggier control flow
|
| | | | |
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | | |
Synapse 1.20.0rc4 (2020-09-16)
==============================
Synapse 1.20.0rc4 is identical to 1.20.0rc3, with the addition of the security fix that was included in 1.19.2.
|
| | | | |
|
| | |\| |
|
| | |\ \ |
|
| |\ \ \ \
| | |_|/
| |/| | |
|
| | | | | |
|
| | |\ \ \
| | | |/
| | |/| |
|
| |\ \ \ \
| | |/ /
| |/| | |
|
| | | | | |
|
| | |/ /
| | |
| | |
| | | |
This fixes #8319.
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | | |
slots use less memory (and attribute access is faster) while slightly
limiting the flexibility of the class attributes. This focuses on objects
which are instantiated "often" and for short periods of time.
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | | |
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
|
| |\ \ \
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Synapse 1.20.0rc3 (2020-09-11)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | | |
(#8290)
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Some Linux distros have begun disabling TLSv1.0 and TLSv1.1 by default
for security reasons, for example in Fedora 33 onwards:
https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Use TLSv1.2 for the fake TLS servers created in the test suite, to avoid
failures due to OpenSSL disallowing TLSv1.0:
<twisted.python.failure.Failure OpenSSL.SSL.Error: [('SSL routines',
'ssl_choose_client_version', 'unsupported protocol')]>
Signed-off-by: Dan Callaghan <djc@djc.id.au>
|
| | | |
| | |
| | | |
This PR adds a information about forwarding `/_synapse/client` endpoints through your reverse proxy. The first of these endpoints are introduced in https://github.com/matrix-org/synapse/pull/8004.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The idea here is that we pass the `max_stream_id` to everything, and only use the stream ID of the particular event to figure out *when* the max stream position has caught up to the event and we can notify people about it.
This is to maintain the distinction between the position of an item in the stream (i.e. event A has stream ID 513) and a token that can be used to partition the stream (i.e. give me all events after stream ID 352). This distinction becomes important when the tokens are more complicated than a single number, which they will be once we start tracking the position of multiple writers in the tokens.
The valid operations here are:
1. Is a position before or after a token
2. Fetching all events between two tokens
3. Merging multiple tokens to get the "max", i.e. `C = max(A, B)` means that for all positions P where P is before A *or* before B, then P is before C.
Future PR will change the token type to a dedicated type.
|
| | | |
| | |
| | |
| | |
| | | |
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
|
| |\| | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | | |
If a file cannot be thumbnailed for some reason (e.g. the file is empty), then
catch the exception and convert it to a reasonable error message for the client.
|
| | | |
| | |
| | |
| | |
| | | |
Removes the `user_joined_room` and stops calling it since there are no observers.
Also cleans-up some other unused signals and related code.
|
| | | |
| | |
| | |
| | |
| | | |
`pusher_pool.on_new_notifications` expected a min and max stream ID, however that was not what we were passing in. Instead, let's just pass it the current max stream ID and have it track the last stream ID it got passed.
I believe that it mostly worked as we called the function for every event. However, it would break for events that got persisted out of order, i.e, that were persisted but the max stream ID wasn't incremented as not all preceding events had finished persisting, and push for that event would be delayed until another event got pushed to the effected users.
|
| | | |
| | |
| | |
| | | |
This reverts commit e7fd336a53a4ca489cdafc389b494d5477019dc0.
|
| | | | |
|
| | | |
| | |
| | | |
Dendrite's implementing MSC2753 over at https://github.com/matrix-org/dendrite/pull/1370 to prove the implementation for MSC purposes, and so sytest has sprouted tests for it over at https://github.com/matrix-org/sytest/pull/944. But we don't want them to run on synapse until synapse implements it.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
missing push rules in `.../actions` and `.../enabled` (#7796)
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This fixes an issue where different methods (crop/scale) overwrite each other.
This first tries the new path. If that fails and we are looking for a
remote thumbnail, it tries the old path. If that still isn't found, it
continues as normal.
This should probably be removed in the future, after some of the newer
thumbnails were generated with the new path on most deployments. Then
the overhead should be minimal if the other thumbnails need to be
regenerated.
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
|
| | | |
| | |
| | | |
The intention here is to change `StreamToken.room_key` to be a `RoomStreamToken` in a future PR, but that is a big enough change without this refactoring too.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
whitelist (#8275)
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
|
| | | |
| | |
| | | |
This removes `SourcePaginationConfig` and `get_pagination_rows`. The reasoning behind this is that these generic classes/functions erased the types of the IDs it used (i.e. instead of passing around `StreamToken` it'd pass in e.g. `token.room_key`, which don't have uniform types).
|
| | | |
| | |
| | |
| | |
| | |
| | | |
Update `log_function` to use the right factory to create log records, to make
sure that they have `request` attributes.
Fixes: #8267.
|
| | | |
| | |
| | |
| | |
| | | |
It did not correctly handle IDs finishing being persisted out of
order, resulting in the `current_position` lagging until new IDs are
persisted.
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Synapse 1.20.0rc1 (2020-09-08)
==============================
Removal warning
---------------
Some older clients used a [disallowed character](https://matrix.org/docs/spec/client_server/r0.6.1#post-matrix-client-r0-register-email-requesttoken) (`:`) in the `client_secret` parameter of various endpoints. The incorrect behaviour was allowed for backwards compatibility, but is now being removed from Synapse as most users have updated their client. Further context can be found at [\#6766](https://github.com/matrix-org/synapse/issues/6766).
Features
--------
- Add an endpoint to query your shared rooms with another user as an implementation of [MSC2666](https://github.com/matrix-org/matrix-doc/pull/2666). ([\#7785](https://github.com/matrix-org/synapse/issues/7785))
- Iteratively encode JSON to avoid blocking the reactor. ([\#8013](https://github.com/matrix-org/synapse/issues/8013), [\#8116](https://github.com/matrix-org/synapse/issues/8116))
- Add support for shadow-banning users (ignoring any message send requests). ([\#8034](https://github.com/matrix-org/synapse/issues/8034), [\#8092](https://github.com/matrix-org/synapse/issues/8092), [\#8095](https://github.com/matrix-org/synapse/issues/8095), [\#8142](https://github.com/matrix-org/synapse/issues/8142), [\#8152](https://github.com/matrix-org/synapse/issues/8152), [\#8157](https://github.com/matrix-org/synapse/issues/8157), [\#8158](https://github.com/matrix-org/synapse/issues/8158), [\#8176](https://github.com/matrix-org/synapse/issues/8176))
- Use the default template file when its equivalent is not found in a custom template directory. ([\#8037](https://github.com/matrix-org/synapse/issues/8037), [\#8107](https://github.com/matrix-org/synapse/issues/8107), [\#8252](https://github.com/matrix-org/synapse/issues/8252))
- Add unread messages count to sync responses, as specified in [MSC2654](https://github.com/matrix-org/matrix-doc/pull/2654). ([\#8059](https://github.com/matrix-org/synapse/issues/8059), [\#8254](https://github.com/matrix-org/synapse/issues/8254), [\#8270](https://github.com/matrix-org/synapse/issues/8270), [\#8274](https://github.com/matrix-org/synapse/issues/8274))
- Optimise `/federation/v1/user/devices/` API by only returning devices with encryption keys. ([\#8198](https://github.com/matrix-org/synapse/issues/8198))
Bugfixes
--------
- Fix a memory leak by limiting the length of time that messages will be queued for a remote server that has been unreachable. ([\#7864](https://github.com/matrix-org/synapse/issues/7864))
- Fix `Re-starting finished log context PUT-nnnn` warning when event persistence failed. ([\#8081](https://github.com/matrix-org/synapse/issues/8081))
- Synapse now correctly enforces the valid characters in the `client_secret` parameter used in various endpoints. ([\#8101](https://github.com/matrix-org/synapse/issues/8101))
- Fix a bug introduced in v1.7.2 impacting message retention policies that would allow federated homeservers to dictate a retention period that's lower than the configured minimum allowed duration in the configuration file. ([\#8104](https://github.com/matrix-org/synapse/issues/8104))
- Fix a long-standing bug where invalid JSON would be accepted by Synapse. ([\#8106](https://github.com/matrix-org/synapse/issues/8106))
- Fix a bug introduced in Synapse v1.12.0 which could cause `/sync` requests to fail with a 404 if you had a very old outstanding room invite. ([\#8110](https://github.com/matrix-org/synapse/issues/8110))
- Return a proper error code when the rooms of an invalid group are requested. ([\#8129](https://github.com/matrix-org/synapse/issues/8129))
- Fix a bug which could cause a leaked postgres connection if synapse was set to daemonize. ([\#8131](https://github.com/matrix-org/synapse/issues/8131))
- Clarify the error code if a user tries to register with a numeric ID. This bug was introduced in v1.15.0. ([\#8135](https://github.com/matrix-org/synapse/issues/8135))
- Fix a bug where appservices with ratelimiting disabled would still be ratelimited when joining rooms. This bug was introduced in v1.19.0. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix logging in via OpenID Connect with a provider that uses integer user IDs. ([\#8190](https://github.com/matrix-org/synapse/issues/8190))
- Fix a longstanding bug where user directory updates could break when unexpected profile data was included in events. ([\#8223](https://github.com/matrix-org/synapse/issues/8223))
- Fix a longstanding bug where stats updates could break when unexpected profile data was included in events. ([\#8226](https://github.com/matrix-org/synapse/issues/8226))
- Fix slow start times for large servers by removing a table scan of the `users` table from startup code. ([\#8271](https://github.com/matrix-org/synapse/issues/8271))
Updates to the Docker image
---------------------------
- Fix builds of the Docker image on non-x86 platforms. ([\#8144](https://github.com/matrix-org/synapse/issues/8144))
- Added curl for healthcheck support and readme updates for the change. Contributed by @maquis196. ([\#8147](https://github.com/matrix-org/synapse/issues/8147))
Improved Documentation
----------------------
- Link to matrix-synapse-rest-password-provider in the password provider documentation. ([\#8111](https://github.com/matrix-org/synapse/issues/8111))
- Updated documentation to note that Synapse does not follow `HTTP 308` redirects due to an upstream library not supporting them. Contributed by Ryan Cole. ([\#8120](https://github.com/matrix-org/synapse/issues/8120))
- Explain better what GDPR-erased means when deactivating a user. ([\#8189](https://github.com/matrix-org/synapse/issues/8189))
Internal Changes
----------------
- Add filter `name` to the `/users` admin API, which filters by user ID or displayname. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#7377](https://github.com/matrix-org/synapse/issues/7377), [\#8163](https://github.com/matrix-org/synapse/issues/8163))
- Reduce run times of some unit tests by advancing the reactor a fewer number of times. ([\#7757](https://github.com/matrix-org/synapse/issues/7757))
- Don't fail `/submit_token` requests on incorrect session ID if `request_token_inhibit_3pid_errors` is turned on. ([\#7991](https://github.com/matrix-org/synapse/issues/7991))
- Convert various parts of the codebase to async/await. ([\#8071](https://github.com/matrix-org/synapse/issues/8071), [\#8072](https://github.com/matrix-org/synapse/issues/8072), [\#8074](https://github.com/matrix-org/synapse/issues/8074), [\#8075](https://github.com/matrix-org/synapse/issues/8075), [\#8076](https://github.com/matrix-org/synapse/issues/8076), [\#8087](https://github.com/matrix-org/synapse/issues/8087), [\#8100](https://github.com/matrix-org/synapse/issues/8100), [\#8119](https://github.com/matrix-org/synapse/issues/8119), [\#8121](https://github.com/matrix-org/synapse/issues/8121), [\#8133](https://github.com/matrix-org/synapse/issues/8133), [\#8156](https://github.com/matrix-org/synapse/issues/8156), [\#8162](https://github.com/matrix-org/synapse/issues/8162), [\#8166](https://github.com/matrix-org/synapse/issues/8166), [\#8168](https://github.com/matrix-org/synapse/issues/8168), [\#8173](https://github.com/matrix-org/synapse/issues/8173), [\#8191](https://github.com/matrix-org/synapse/issues/8191), [\#8192](https://github.com/matrix-org/synapse/issues/8192), [\#8193](https://github.com/matrix-org/synapse/issues/8193), [\#8194](https://github.com/matrix-org/synapse/issues/8194), [\#8195](https://github.com/matrix-org/synapse/issues/8195), [\#8197](https://github.com/matrix-org/synapse/issues/8197), [\#8199](https://github.com/matrix-org/synapse/issues/8199), [\#8200](https://github.com/matrix-org/synapse/issues/8200), [\#8201](https://github.com/matrix-org/synapse/issues/8201), [\#8202](https://github.com/matrix-org/synapse/issues/8202), [\#8207](https://github.com/matrix-org/synapse/issues/8207), [\#8213](https://github.com/matrix-org/synapse/issues/8213), [\#8214](https://github.com/matrix-org/synapse/issues/8214))
- Remove some unused database functions. ([\#8085](https://github.com/matrix-org/synapse/issues/8085))
- Add type hints to various parts of the codebase. ([\#8090](https://github.com/matrix-org/synapse/issues/8090), [\#8127](https://github.com/matrix-org/synapse/issues/8127), [\#8187](https://github.com/matrix-org/synapse/issues/8187), [\#8241](https://github.com/matrix-org/synapse/issues/8241), [\#8140](https://github.com/matrix-org/synapse/issues/8140), [\#8183](https://github.com/matrix-org/synapse/issues/8183), [\#8232](https://github.com/matrix-org/synapse/issues/8232), [\#8235](https://github.com/matrix-org/synapse/issues/8235), [\#8237](https://github.com/matrix-org/synapse/issues/8237), [\#8244](https://github.com/matrix-org/synapse/issues/8244))
- Return the previous stream token if a non-member event is a duplicate. ([\#8093](https://github.com/matrix-org/synapse/issues/8093), [\#8112](https://github.com/matrix-org/synapse/issues/8112))
- Separate `get_current_token` into two since there are two different use cases for it. ([\#8113](https://github.com/matrix-org/synapse/issues/8113))
- Remove `ChainedIdGenerator`. ([\#8123](https://github.com/matrix-org/synapse/issues/8123))
- Reduce the amount of whitespace in JSON stored and sent in responses. ([\#8124](https://github.com/matrix-org/synapse/issues/8124))
- Update the test federation client to handle streaming responses. ([\#8130](https://github.com/matrix-org/synapse/issues/8130))
- Micro-optimisations to `get_auth_chain_ids`. ([\#8132](https://github.com/matrix-org/synapse/issues/8132))
- Refactor `StreamIdGenerator` and `MultiWriterIdGenerator` to have the same interface. ([\#8161](https://github.com/matrix-org/synapse/issues/8161))
- Add functions to `MultiWriterIdGen` used by events stream. ([\#8164](https://github.com/matrix-org/synapse/issues/8164), [\#8179](https://github.com/matrix-org/synapse/issues/8179))
- Fix tests that were broken due to the merge of 1.19.1. ([\#8167](https://github.com/matrix-org/synapse/issues/8167))
- Make `SlavedIdTracker.advance` have the same interface as `MultiWriterIDGenerator`. ([\#8171](https://github.com/matrix-org/synapse/issues/8171))
- Remove unused `is_guest` parameter from, and add safeguard to, `MessageHandler.get_room_data`. ([\#8174](https://github.com/matrix-org/synapse/issues/8174), [\#8181](https://github.com/matrix-org/synapse/issues/8181))
- Standardize the mypy configuration. ([\#8175](https://github.com/matrix-org/synapse/issues/8175))
- Refactor some of `LoginRestServlet`'s helper methods, and move them to `AuthHandler` for easier reuse. ([\#8182](https://github.com/matrix-org/synapse/issues/8182))
- Fix `wait_for_stream_position` to allow multiple waiters on same stream ID. ([\#8196](https://github.com/matrix-org/synapse/issues/8196))
- Make `MultiWriterIDGenerator` work for streams that use negative values. ([\#8203](https://github.com/matrix-org/synapse/issues/8203))
- Refactor queries for device keys and cross-signatures. ([\#8204](https://github.com/matrix-org/synapse/issues/8204), [\#8205](https://github.com/matrix-org/synapse/issues/8205), [\#8222](https://github.com/matrix-org/synapse/issues/8222), [\#8224](https://github.com/matrix-org/synapse/issues/8224), [\#8225](https://github.com/matrix-org/synapse/issues/8225), [\#8231](https://github.com/matrix-org/synapse/issues/8231), [\#8233](https://github.com/matrix-org/synapse/issues/8233), [\#8234](https://github.com/matrix-org/synapse/issues/8234))
- Fix type hints for functions decorated with `@cached`. ([\#8240](https://github.com/matrix-org/synapse/issues/8240))
- Remove obsolete `order` field from federation send queues. ([\#8245](https://github.com/matrix-org/synapse/issues/8245))
- Stop sub-classing from object. ([\#8249](https://github.com/matrix-org/synapse/issues/8249))
- Add more logging to debug slow startup. ([\#8264](https://github.com/matrix-org/synapse/issues/8264))
- Do not attempt to upgrade database schema on worker processes. ([\#8266](https://github.com/matrix-org/synapse/issues/8266), [\#8276](https://github.com/matrix-org/synapse/issues/8276))
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | | |
By importing from canonicaljson the simplejson module was still being used
in some situations. After this change the std lib json is consistenty used
throughout Synapse.
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
'populate_stats_process_rooms' again (#8243)
Fixes https://github.com/matrix-org/synapse/issues/8238
Alongside the delta file, some changes were also necessary to the codebase to remove references to the now defunct `populate_stats_process_rooms_2` background job. Thankfully the latter doesn't seem to have made it into any documentation yet :)
|
| |\| | |
|
| | | |
| | |
| | |
| | | |
marked unread (#8274)
|
| | | |
| | |
| | | |
This takes about 10 seconds in the best case; often more.
|
| | | |
| | |
| | |
| | | |
Fix unread counts making sync fail if the value of the `unread_count`
column in `event_push_summary` is `None`.
|
| | | |
| | |
| | |
| | | |
I'm hoping this will provide some pointers for debugging
https://github.com/matrix-org/synapse/issues/7968.
|
| | | | |
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The version 1.3.0 has a bug with unicode charecters:
```
>>> from canonicaljson import encode_pretty_printed_json
>>> encode_pretty_printed_json({'a': 'à'})
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/erdnaxeli/.pyenv/versions/3.6.7/lib/python3.6/site-packages/canonicaljson.py", line 96, in encode_pretty_printed_json
return _pretty_encoder.encode(json_object).encode("ascii")
UnicodeEncodeError: 'ascii' codec can't encode character '\xe0' in position 12: ordinal not in range(128)
```
Signed-off-by: Alexandre Morignot <erdnaxeli@cervoi.se>
Co-authored-by: Alexandre Morignot <erdnaxeli@cervoi.se>
|
| | | |
| | |
| | | |
Fixes: #6467
|
| | | | |
|
| |\| | |
|
| | | |
| | |
| | |
| | |
| | | |
All the callers want this info in the same place, so let's reduce the
duplication by doing it here.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* Fixup `ALTER TABLE` database queries
Make the new columns nullable, because doing otherwise can wedge a
server with a big database, as setting a default value rewrites the
table.
* Switch back to using the notifications count in the push badge
Clients are likely to be confused if we send a push but the badge count
is the unread messages one, and not the notifications one.
* Changelog
|
| | | |
| | |
| | | |
Regressed in #8037.
|
| | | | |
|
| | | |
| | |
| | |
| | |
| | | |
ordering after transmission (#8247)
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| |/ /
| |
| | |
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
|
| | |
| |
| | |
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
* Revert "Add experimental support for sharding event persister. (#8170)"
This reverts commit 82c1ee1c22a87b9e6e3179947014b0f11c0a1ac3.
* Changelog
|
| | | |
|
| | |
| |
| | |
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
|
| | |
| |
| | |
I think this is simpler (and moves stuff out of the db threads)
|
| | |
| |
| | |
This requires adding a mypy plugin to fiddle with the type signatures a bit.
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| | |
We have three things which all call `_get_e2e_device_keys_and_signatures_txn`
with their own `runInteraction`. Factor out the common code.
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| | |
We can use the existing `_get_e2e_device_keys_and_signatures_txn` instead of
creating our own txn function
|
| | |
| |
| |
| |
| |
| | |
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Add shared_rooms api
* Add changelog
* Add .
* Wrap response in {"rooms": }
* linting
* Add unstable_features key
* Remove options from isort that aren't part of 5.x
`-y` and `-rc` are now default behaviour and no longer exist.
`dont-skip` is no longer required
https://timothycrosley.github.io/isort/CHANGELOG/#500-penny-july-4-2020
* Update imports to make isort happy
* Add changelog
* Update tox.ini file with correct invocation
* fix linting again for isort
* Vendor prefix unstable API
* Fix to match spec
* import Codes
* import Codes
* Use FORBIDDEN
* Update changelog.d/7785.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Implement get_shared_rooms_for_users
* a comma
* trailing whitespace
* Handle the easy feedback
* Switch to using runInteraction
* Add tests
* Feedback
* Seperate unstable endpoint from v2
* Add upgrade node
* a line
* Fix style by adding a blank line at EOF.
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Update UPGRADE.rst
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Fix UPGRADE/CHANGELOG unstable paths
unstable unstable unstable
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
|
| | | |
|
| | | |
|
| | |
| |
| |
| | |
this makes it a bit clearer what's going on.
|
| | | |
|
| | |
| |
| | |
Fixes https://github.com/matrix-org/synapse/issues/8185
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| | |
... to `_get_e2e_device_keys_and_signatures_txn`, to better reflect what it
does.
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| | |
(#8203)
This is so that we can use it for the backfill events stream.
|
| | |
| |
| | |
This is due to compatibility issues with old Python versions.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Move `get_devices_with_keys_by_user` to `EndToEndKeyWorkerStore`
this seems a better fit for it.
This commit simply moves the existing code: no other changes at all.
* Rename `get_devices_with_keys_by_user`
to better reflect what it does.
* get_device_stream_token abstract method
To avoid referencing fields which are declared in the derived classes, make
`get_device_stream_token` abstract, and define that in the classes which define
`_device_list_id_gen`.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
... and to show that it does something slightly different to
`_get_e2e_device_keys_txn`.
`include_all_devices` and `include_deleted_devices` were never used (and
`include_deleted_devices` was broken, since that would cause `None`s in the
result which were not handled in the loop below.
Add some typing too.
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| | |
This fixes a bug where having multiple callers waiting on the same
stream and position will cause it to try and compare two deferreds,
which fails (due to the sorted list having an entry of `Tuple[int,
Deferred]`).
|
| | |
| |
| |
| | |
async (#8197)
|
| | |
| |
| |
| |
| | |
There's not much point in returning all the others, and some people have a
silly number of devices.
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
This is split out from https://github.com/matrix-org/synapse/pull/7438, which had gotten rather large.
`LoginRestServlet` has a couple helper methods, `login_submission_legacy_convert` and `login_id_thirdparty_from_phone`. They're primarily used for converting legacy user login submissions to "identifier" dicts ([see spec](https://matrix.org/docs/spec/client_server/r0.6.1#post-matrix-client-r0-login)). Identifying information such as usernames or 3PID information used to be top-level in the login body. They're now supposed to be put inside an [identifier](https://matrix.org/docs/spec/client_server/r0.6.1#identifier-types) parameter instead.
#7438's purpose is to allow using the new identifier parameter during User-Interactive Authentication, which is currently handled in AuthHandler. That's why I've moved these helper methods there. I also moved the refactoring of these method from #7438 as they're relevant.
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| | |
This was forgotten in #8164.
|
| | |
| |
| |
| | |
insert_many, delete_*) (#8168)
|
| | | |
|
| | | |
|
| |\| |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| | |
This ensures systemctl start matrix-synapse returns only after synapse
is actually started, which is very useful for automated deployments.
Fixes #5761
Signed-off-by: Dexter Chua <dec41@srcf.net>
|
| | |
| |
| |
| |
| |
| |
| | |
#8174 removed the `is_guest` parameter from `get_room_data`, at the same time that #8157 was merged using it, colliding together to break unit tests on develop.
This PR removes the `is_guest` parameter from the call in the broken test.
Uses the same changelog as #8174.
|
| | | |
|
| | |
| |
| |
| |
| |
| | |
Small cleanup PR.
* Removed the unused `is_guest` argument
* Added a safeguard to a (currently) impossible code path, fixing static checking at the same time.
|
| | |
| |
| |
| |
| |
| | |
(#8144)
Signed-off-by: Christopher May-Townsend <chris@maytownsend.co.uk>
|
| | | |
|
| | |
| |
| |
| | |
Now that the server supports streaming back JSON responses, it would be nice to
show the response as it is streamed, in the test tool.
|
| | | |
|
| | |
| |
| |
| | |
(#8171)
|
| | | |
|
| | |
| |
| |
| | |
These were passing on the release-v1.19.1 branch but started failing once merged
to develop.
|
| | | |
|
| | | |
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.19.1rc1 (2020-08-25)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.19.0 where appservices with ratelimiting disabled would still be ratelimited when joining rooms. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix a bug introduced in v1.19.0 that would cause e.g. profile updates to fail due to incorrect application of rate limits on join requests. ([\#8153](https://github.com/matrix-org/synapse/issues/8153))
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| | |
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| | |
| |
| |
| | |
This is mainly so that `StreamIdGenerator` and `MultiWriterIdGenerator`
will have the same interface, allowing them to be used interchangeably.
|
| | |
| |
| | |
Some fixes to wording I noticed after merging #7377.
|
| | | |
|
| | |
| |
| |
| |
| | |
* Search in columns 'name' and 'displayname' in the admin users endpoint
Signed-off-by: Manuel Stahl <manuel.stahl@awesome-technologies.de>
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
request_token_inhibit_3pid_errors is turned on (#7991)
* Don't raise session_id errors on submit_token if request_token_inhibit_3pid_errors is set
* Changelog
* Also wait some time before responding to /requestToken
* Incorporate review
* Update synapse/storage/databases/main/registration.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Incorporate review
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
|
| | |
| |
| |
| |
| |
| | |
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| | |
It turns out that not all out-of-band membership events are labelled as such,
so we need to be more accepting here.
|
| | |
| |
| |
| | |
guests. (#8135)
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| | |
... otherwise it gets leaked.
|
| | |
| |
| |
| |
| | |
It's just a thin wrapper around two ID gens to make `get_current_token`
and `get_next` return tuples. This can easily be replaced by calling the
appropriate methods on the underlying ID gens directly.
|
| | | |
|
| | |
| |
| |
| |
| | |
* Updated docs: Added note about missing 308 redirect support.
* Added changelog
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The function is used for two purposes: 1) for subscribers of streams to
get a token they can use to get further updates with, and 2) for
replication to track position of the writers of the stream.
For streams with a single writer the two scenarios produce the same
result, however the situation becomes complicated for streams with
multiple writers. The current `MultiWriterIdGenerator` does not
correctly handle the first case (which is not an issue as its only used
for the `caches` stream which nothing subscribes to outside of
replication).
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
Closes: https://github.com/matrix-org/synapse/issues/6766
Equivalent Sydent PR: https://github.com/matrix-org/sydent/pull/309
I believe it's now time to remove the extra allowed `:` from `client_secret` parameters.
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| | |
Turns out that part of the codebase (synapse.config.server) checks for this key explicitly. Remove that check.
|
| | | |
|
| | |
| |
| | |
Fixes https://github.com/matrix-org/synapse/issues/6583
|
| |\| |
|
| | |
| |
| |
| | |
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Synapse 1.19.0rc1 (2020-08-13)
==============================
Removal warning
---------------
As outlined in the [previous release](https://github.com/matrix-org/synapse/releases/tag/v1.18.0), we are no longer publishing Docker images with the `-py3` tag suffix. On top of that, we have also removed the `latest-py3` tag. Please see [the announcement in the upgrade notes for 1.18.0](https://github.com/matrix-org/synapse/blob/develop/UPGRADE.rst#upgrading-to-v1180).
Features
--------
- Add option to allow server admins to join rooms which fail complexity checks. Contributed by @lugino-emeritus. ([\#7902](https://github.com/matrix-org/synapse/issues/7902))
- Add an option to purge room or not with delete room admin endpoint (`POST /_synapse/admin/v1/rooms/<room_id>/delete`). Contributed by @dklimpel. ([\#7964](https://github.com/matrix-org/synapse/issues/7964))
- Add rate limiting to users joining rooms. ([\#8008](https://github.com/matrix-org/synapse/issues/8008))
- Add a `/health` endpoint to every configured HTTP listener that can be used as a health check endpoint by load balancers. ([\#8048](https://github.com/matrix-org/synapse/issues/8048))
- Allow login to be blocked based on the values of SAML attributes. ([\#8052](https://github.com/matrix-org/synapse/issues/8052))
- Allow guest access to the `GET /_matrix/client/r0/rooms/{room_id}/members` endpoint, according to MSC2689. Contributed by Awesome Technologies Innovationslabor GmbH. ([\#7314](https://github.com/matrix-org/synapse/issues/7314))
Bugfixes
--------
- Fix a bug introduced in Synapse v1.7.2 which caused inaccurate membership counts in the room directory. ([\#7977](https://github.com/matrix-org/synapse/issues/7977))
- Fix a long standing bug: 'Duplicate key value violates unique constraint "event_relations_id"' when message retention is configured. ([\#7978](https://github.com/matrix-org/synapse/issues/7978))
- Fix "no create event in auth events" when trying to reject invitation after inviter leaves. Bug introduced in Synapse v1.10.0. ([\#7980](https://github.com/matrix-org/synapse/issues/7980))
- Fix various comments and minor discrepencies in server notices code. ([\#7996](https://github.com/matrix-org/synapse/issues/7996))
- Fix a long standing bug where HTTP HEAD requests resulted in a 400 error. ([\#7999](https://github.com/matrix-org/synapse/issues/7999))
- Fix a long-standing bug which caused two copies of some log lines to be written when synctl was used along with a MemoryHandler logger. ([\#8011](https://github.com/matrix-org/synapse/issues/8011), [\#8012](https://github.com/matrix-org/synapse/issues/8012))
Updates to the Docker image
---------------------------
- We no longer publish Docker images with the `-py3` tag suffix, as [announced in the upgrade notes](https://github.com/matrix-org/synapse/blob/develop/UPGRADE.rst#upgrading-to-v1180). ([\#8056](https://github.com/matrix-org/synapse/issues/8056))
Improved Documentation
----------------------
- Document how to set up a client .well-known file and fix several pieces of outdated documentation. ([\#7899](https://github.com/matrix-org/synapse/issues/7899))
- Improve workers docs. ([\#7990](https://github.com/matrix-org/synapse/issues/7990), [\#8000](https://github.com/matrix-org/synapse/issues/8000))
- Fix typo in `docs/workers.md`. ([\#7992](https://github.com/matrix-org/synapse/issues/7992))
- Add documentation for how to undo a room shutdown. ([\#7998](https://github.com/matrix-org/synapse/issues/7998), [\#8010](https://github.com/matrix-org/synapse/issues/8010))
Internal Changes
----------------
- Reduce the amount of whitespace in JSON stored and sent in responses. Contributed by David Vo. ([\#7372](https://github.com/matrix-org/synapse/issues/7372))
- Switch to the JSON implementation from the standard library and bump the minimum version of the canonicaljson library to 1.2.0. ([\#7936](https://github.com/matrix-org/synapse/issues/7936), [\#7979](https://github.com/matrix-org/synapse/issues/7979))
- Convert various parts of the codebase to async/await. ([\#7947](https://github.com/matrix-org/synapse/issues/7947), [\#7948](https://github.com/matrix-org/synapse/issues/7948), [\#7949](https://github.com/matrix-org/synapse/issues/7949), [\#7951](https://github.com/matrix-org/synapse/issues/7951), [\#7963](https://github.com/matrix-org/synapse/issues/7963), [\#7973](https://github.com/matrix-org/synapse/issues/7973), [\#7975](https://github.com/matrix-org/synapse/issues/7975), [\#7976](https://github.com/matrix-org/synapse/issues/7976), [\#7981](https://github.com/matrix-org/synapse/issues/7981), [\#7987](https://github.com/matrix-org/synapse/issues/7987), [\#7989](https://github.com/matrix-org/synapse/issues/7989), [\#8003](https://github.com/matrix-org/synapse/issues/8003), [\#8014](https://github.com/matrix-org/synapse/issues/8014), [\#8016](https://github.com/matrix-org/synapse/issues/8016), [\#8027](https://github.com/matrix-org/synapse/issues/8027), [\#8031](https://github.com/matrix-org/synapse/issues/8031), [\#8032](https://github.com/matrix-org/synapse/issues/8032), [\#8035](https://github.com/matrix-org/synapse/issues/8035), [\#8042](https://github.com/matrix-org/synapse/issues/8042), [\#8044](https://github.com/matrix-org/synapse/issues/8044), [\#8045](https://github.com/matrix-org/synapse/issues/8045), [\#8061](https://github.com/matrix-org/synapse/issues/8061), [\#8062](https://github.com/matrix-org/synapse/issues/8062), [\#8063](https://github.com/matrix-org/synapse/issues/8063), [\#8066](https://github.com/matrix-org/synapse/issues/8066), [\#8069](https://github.com/matrix-org/synapse/issues/8069), [\#8070](https://github.com/matrix-org/synapse/issues/8070))
- Move some database-related log lines from the default logger to the database/transaction loggers. ([\#7952](https://github.com/matrix-org/synapse/issues/7952))
- Add a script to detect source code files using non-unix line terminators. ([\#7965](https://github.com/matrix-org/synapse/issues/7965), [\#7970](https://github.com/matrix-org/synapse/issues/7970))
- Log the SAML session ID during creation. ([\#7971](https://github.com/matrix-org/synapse/issues/7971))
- Implement new experimental push rules for some users. ([\#7997](https://github.com/matrix-org/synapse/issues/7997))
- Remove redundant and unreliable signature check for v1 Identity Service lookup responses. ([\#8001](https://github.com/matrix-org/synapse/issues/8001))
- Improve the performance of the register endpoint. ([\#8009](https://github.com/matrix-org/synapse/issues/8009))
- Reduce less useful output in the newsfragment CI step. Add a link to the changelog section of the contributing guide on error. ([\#8024](https://github.com/matrix-org/synapse/issues/8024))
- Rename storage layer objects to be more sensible. ([\#8033](https://github.com/matrix-org/synapse/issues/8033))
- Change the default log config to reduce disk I/O and storage for new servers. ([\#8040](https://github.com/matrix-org/synapse/issues/8040))
- Add an assertion on `prev_events` in `create_new_client_event`. ([\#8041](https://github.com/matrix-org/synapse/issues/8041))
- Add a comment to `ServerContextFactory` about the use of `SSLv23_METHOD`. ([\#8043](https://github.com/matrix-org/synapse/issues/8043))
- Log `OPTIONS` requests at `DEBUG` rather than `INFO` level to reduce amount logged at `INFO`. ([\#8049](https://github.com/matrix-org/synapse/issues/8049))
- Reduce amount of outbound request logging at `INFO` level. ([\#8050](https://github.com/matrix-org/synapse/issues/8050))
- It is no longer necessary to explicitly define `filters` in the logging configuration. (Continuing to do so is redundant but harmless.) ([\#8051](https://github.com/matrix-org/synapse/issues/8051))
- Add and improve type hints. ([\#8058](https://github.com/matrix-org/synapse/issues/8058), [\#8064](https://github.com/matrix-org/synapse/issues/8064), [\#8060](https://github.com/matrix-org/synapse/issues/8060), [\#8067](https://github.com/matrix-org/synapse/issues/8067))
|
| | |
| |
| |
| | |
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
|
| | |
| |
| |
| | |
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
|
| | |
| |
| |
| | |
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
If we got an error persisting an event, we would try to remove the push actions
asynchronously, which would lead to a 'Re-starting finished log context'
warning.
I don't think there's any need for this to be asynchronous.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Empty federation transmission queues when we are backing off.
Fixes #7828.
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
* Address feedback
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
* Reword newsfile
|
| |/ |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
async/await (#8063)
|
| | |
|
| | |
|
| |\
| |
| | |
Change HomeServer definition to work with typing.
|
