diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/turn-howto.md | 67 |
1 files changed, 52 insertions, 15 deletions
diff --git a/docs/turn-howto.md b/docs/turn-howto.md index e6812de69e..e32aaa1850 100644 --- a/docs/turn-howto.md +++ b/docs/turn-howto.md @@ -15,8 +15,8 @@ The following sections describe how to install [coturn](<https://github.com/cotu For TURN relaying with `coturn` to work, it must be hosted on a server/endpoint with a public IP. -Hosting TURN behind a NAT (even with appropriate port forwarding) is known to cause issues -and to often not work. +Hosting TURN behind NAT requires port forwaring and for the NAT gateway to have a public IP. +However, even with appropriate configuration, NAT is known to cause issues and to often not work. ## `coturn` setup @@ -103,7 +103,23 @@ This will install and start a systemd service called `coturn`. denied-peer-ip=192.168.0.0-192.168.255.255 denied-peer-ip=172.16.0.0-172.31.255.255 + # recommended additional local peers to block, to mitigate external access to internal services. + # https://www.rtcsec.com/article/slack-webrtc-turn-compromise-and-bug-bounty/#how-to-fix-an-open-turn-relay-to-address-this-vulnerability + no-multicast-peers + denied-peer-ip=0.0.0.0-0.255.255.255 + denied-peer-ip=100.64.0.0-100.127.255.255 + denied-peer-ip=127.0.0.0-127.255.255.255 + denied-peer-ip=169.254.0.0-169.254.255.255 + denied-peer-ip=192.0.0.0-192.0.0.255 + denied-peer-ip=192.0.2.0-192.0.2.255 + denied-peer-ip=192.88.99.0-192.88.99.255 + denied-peer-ip=198.18.0.0-198.19.255.255 + denied-peer-ip=198.51.100.0-198.51.100.255 + denied-peer-ip=203.0.113.0-203.0.113.255 + denied-peer-ip=240.0.0.0-255.255.255.255 + # special case the turn server itself so that client->TURN->TURN->client flows work + # this should be one of the turn server's listening IPs allowed-peer-ip=10.0.0.1 # consider whether you want to limit the quota of relayed streams per user (or total) to avoid risk of DoS. @@ -123,7 +139,7 @@ This will install and start a systemd service called `coturn`. pkey=/path/to/privkey.pem ``` - In this case, replace the `turn:` schemes in the `turn_uri` settings below + In this case, replace the `turn:` schemes in the `turn_uris` settings below with `turns:`. We recommend that you only try to set up TLS/DTLS once you have set up a @@ -134,21 +150,33 @@ This will install and start a systemd service called `coturn`. traffic (remember to allow both TCP and UDP traffic), and ports 49152-65535 for the UDP relay.) -1. We do not recommend running a TURN server behind NAT, and are not aware of - anyone doing so successfully. +1. If your TURN server is behind NAT, the NAT gateway must have an external, + publicly-reachable IP address. You must configure coturn to advertise that + address to connecting clients: + + ``` + external-ip=EXTERNAL_NAT_IPv4_ADDRESS + ``` - If you want to try it anyway, you will at least need to tell coturn its - external IP address: + You may optionally limit the TURN server to listen only on the local + address that is mapped by NAT to the external address: ``` - external-ip=192.88.99.1 + listening-ip=INTERNAL_TURNSERVER_IPv4_ADDRESS ``` - ... and your NAT gateway must forward all of the relayed ports directly - (eg, port 56789 on the external IP must be always be forwarded to port - 56789 on the internal IP). + If your NAT gateway is reachable over both IPv4 and IPv6, you may + configure coturn to advertise each available address: - If you get this working, let us know! + ``` + external-ip=EXTERNAL_NAT_IPv4_ADDRESS + external-ip=EXTERNAL_NAT_IPv6_ADDRESS + ``` + + When advertising an external IPv6 address, ensure that the firewall and + network settings of the system running your TURN server are configured to + accept IPv6 traffic, and that the TURN server is listening on the local + IPv6 address that is mapped by NAT to the external IPv6 address. 1. (Re)start the turn server: @@ -216,9 +244,6 @@ connecting". Unfortunately, troubleshooting this can be tricky. Here are a few things to try: - * Check that your TURN server is not behind NAT. As above, we're not aware of - anyone who has successfully set this up. - * Check that you have opened your firewall to allow TCP and UDP traffic to the TURN ports (normally 3478 and 5349). @@ -234,6 +259,18 @@ Here are a few things to try: Try removing any AAAA records for your TURN server, so that it is only reachable over IPv4. + * If your TURN server is behind NAT: + + * double-check that your NAT gateway is correctly forwarding all TURN + ports (normally 3478 & 5349 for TCP & UDP TURN traffic, and 49152-65535 for the UDP + relay) to the NAT-internal address of your TURN server. If advertising + both IPv4 and IPv6 external addresses via the `external-ip` option, ensure + that the NAT is forwarding both IPv4 and IPv6 traffic to the IPv4 and IPv6 + internal addresses of your TURN server. When in doubt, remove AAAA records + for your TURN server and specify only an IPv4 address as your `external-ip`. + + * ensure that your TURN server uses the NAT gateway as its default route. + * Enable more verbose logging in coturn via the `verbose` setting: ``` |