summary refs log tree commit diff
path: root/docs/upgrade.md
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--docs/upgrade.md1353
1 files changed, 1353 insertions, 0 deletions
diff --git a/docs/upgrade.md b/docs/upgrade.md
new file mode 100644
index 0000000000..a44960c2b8
--- /dev/null
+++ b/docs/upgrade.md
@@ -0,0 +1,1353 @@
+# Upgrading Synapse
+
+Before upgrading check if any special steps are required to upgrade from
+the version you currently have installed to the current version of
+Synapse. The extra instructions that may be required are listed later in
+this document.
+
+-   Check that your versions of Python and PostgreSQL are still
+    supported.
+
+    Synapse follows upstream lifecycles for [Python](https://endoflife.date/python) and
+    [PostgreSQL](https://endoflife.date/postgresql), and removes support for versions
+    which are no longer maintained.
+
+    The website <https://endoflife.date> also offers convenient
+    summaries.
+
+-   If Synapse was installed using [prebuilt
+    packages](../setup/INSTALL.md#prebuilt-packages), you will need to follow the
+    normal process for upgrading those packages.
+
+-   If Synapse was installed from source, then:
+
+    1.  Activate the virtualenv before upgrading. For example, if
+        Synapse is installed in a virtualenv in `~/synapse/env` then
+        run:
+
+        ```bash
+        source ~/synapse/env/bin/activate
+        ```
+
+    2.  If Synapse was installed using pip then upgrade to the latest
+        version by running:
+
+        ```bash
+        pip install --upgrade matrix-synapse
+        ```
+
+        If Synapse was installed using git then upgrade to the latest
+        version by running:
+
+        ```bash
+        git pull
+        pip install --upgrade .
+        ```
+
+    3.  Restart Synapse:
+
+        ```bash
+        ./synctl restart
+        ```
+
+To check whether your update was successful, you can check the running
+server version with:
+
+```bash
+# you may need to replace 'localhost:8008' if synapse is not configured
+# to listen on port 8008.
+
+curl http://localhost:8008/_synapse/admin/v1/server_version
+```
+
+## Rolling back to older versions
+
+Rolling back to previous releases can be difficult, due to database
+schema changes between releases. Where we have been able to test the
+rollback process, this will be noted below.
+
+In general, you will need to undo any changes made during the upgrade
+process, for example:
+
+-   pip:
+
+    ```bash
+    source env/bin/activate
+    # replace `1.3.0` accordingly:
+    pip install matrix-synapse==1.3.0
+    ```
+
+-   Debian:
+
+    ```bash
+    # replace `1.3.0` and `stretch` accordingly:
+    wget https://packages.matrix.org/debian/pool/main/m/matrix-synapse-py3/matrix-synapse-py3_1.3.0+stretch1_amd64.deb
+    dpkg -i matrix-synapse-py3_1.3.0+stretch1_amd64.deb
+    ```
+    
+# Upgrading to v1.37.0
+
+## Deprecation of the current spam checker interface
+
+The current spam checker interface is deprecated in favour of a new generic modules system.
+Authors of spam checker modules can refer to [this
+documentation](https://matrix-org.github.io/synapse/develop/modules.html#porting-an-existing-module-that-uses-the-old-interface)
+to update their modules. Synapse administrators can refer to [this
+documentation](https://matrix-org.github.io/synapse/develop/modules.html#using-modules)
+to update their configuration once the modules they are using have been updated.
+
+We plan to remove support for the current spam checker interface in August 2021.
+
+More module interfaces will be ported over to this new generic system in future versions
+of Synapse.
+
+
+# Upgrading to v1.34.0
+
+## `room_invite_state_types` configuration setting
+
+The `room_invite_state_types` configuration setting has been deprecated
+and replaced with `room_prejoin_state`. See the [sample configuration
+file](https://github.com/matrix-org/synapse/blob/v1.34.0/docs/sample_config.yaml#L1515).
+
+If you have set `room_invite_state_types` to the default value you
+should simply remove it from your configuration file. The default value
+used to be:
+
+```yaml
+room_invite_state_types:
+   - "m.room.join_rules"
+   - "m.room.canonical_alias"
+   - "m.room.avatar"
+   - "m.room.encryption"
+   - "m.room.name"
+```
+
+If you have customised this value, you should remove
+`room_invite_state_types` and configure `room_prejoin_state` instead.
+
+# Upgrading to v1.33.0
+
+## Account Validity HTML templates can now display a user's expiration date
+
+This may affect you if you have enabled the account validity feature,
+and have made use of a custom HTML template specified by the
+`account_validity.template_dir` or
+`account_validity.account_renewed_html_path` Synapse config options.
+
+The template can now accept an `expiration_ts` variable, which
+represents the unix timestamp in milliseconds for the future date of
+which their account has been renewed until. See the [default
+template](https://github.com/matrix-org/synapse/blob/release-v1.33.0/synapse/res/templates/account_renewed.html)
+for an example of usage.
+
+ALso note that a new HTML template, `account_previously_renewed.html`,
+has been added. This is is shown to users when they attempt to renew
+their account with a valid renewal token that has already been used
+before. The default template contents can been found
+[here](https://github.com/matrix-org/synapse/blob/release-v1.33.0/synapse/res/templates/account_previously_renewed.html),
+and can also accept an `expiration_ts` variable. This template replaces
+the error message users would previously see upon attempting to use a
+valid renewal token more than once.
+
+# Upgrading to v1.32.0
+
+## Regression causing connected Prometheus instances to become overwhelmed
+
+This release introduces [a
+regression](https://github.com/matrix-org/synapse/issues/9853) that can
+overwhelm connected Prometheus instances. This issue is not present in
+Synapse v1.32.0rc1.
+
+If you have been affected, please downgrade to 1.31.0. You then may need
+to remove excess writeahead logs in order for Prometheus to recover.
+Instructions for doing so are provided
+[here](https://github.com/matrix-org/synapse/pull/9854#issuecomment-823472183).
+
+## Dropping support for old Python, Postgres and SQLite versions
+
+In line with our [deprecation
+policy](https://github.com/matrix-org/synapse/blob/release-v1.32.0/docs/deprecation_policy.md),
+we've dropped support for Python 3.5 and PostgreSQL 9.5, as they are no
+longer supported upstream.
+
+This release of Synapse requires Python 3.6+ and PostgresSQL 9.6+ or
+SQLite 3.22+.
+
+## Removal of old List Accounts Admin API
+
+The deprecated v1 "list accounts" admin API
+(`GET /_synapse/admin/v1/users/<user_id>`) has been removed in this
+version.
+
+The [v2 list accounts
+API](https://github.com/matrix-org/synapse/blob/master/docs/admin_api/user_admin_api.rst#list-accounts)
+has been available since Synapse 1.7.0 (2019-12-13), and is accessible
+under `GET /_synapse/admin/v2/users`.
+
+The deprecation of the old endpoint was announced with Synapse 1.28.0
+(released on 2021-02-25).
+
+## Application Services must use type `m.login.application_service` when registering users
+
+In compliance with the [Application Service
+spec](https://matrix.org/docs/spec/application_service/r0.1.2#server-admin-style-permissions),
+Application Services are now required to use the
+`m.login.application_service` type when registering users via the
+`/_matrix/client/r0/register` endpoint. This behaviour was deprecated in
+Synapse v1.30.0.
+
+Please ensure your Application Services are up to date.
+
+# Upgrading to v1.29.0
+
+## Requirement for X-Forwarded-Proto header
+
+When using Synapse with a reverse proxy (in particular, when using the
+[x_forwarded]{.title-ref} option on an HTTP listener), Synapse now
+expects to receive an [X-Forwarded-Proto]{.title-ref} header on incoming
+HTTP requests. If it is not set, Synapse will log a warning on each
+received request.
+
+To avoid the warning, administrators using a reverse proxy should ensure
+that the reverse proxy sets [X-Forwarded-Proto]{.title-ref} header to
+[https]{.title-ref} or [http]{.title-ref} to indicate the protocol used
+by the client.
+
+Synapse also requires the [Host]{.title-ref} header to be preserved.
+
+See the [reverse proxy documentation](../reverse_proxy.md), where the
+example configurations have been updated to show how to set these
+headers.
+
+(Users of [Caddy](https://caddyserver.com/) are unaffected, since we
+believe it sets [X-Forwarded-Proto]{.title-ref} by default.)
+
+# Upgrading to v1.27.0
+
+## Changes to callback URI for OAuth2 / OpenID Connect and SAML2
+
+This version changes the URI used for callbacks from OAuth2 and SAML2
+identity providers:
+
+-   If your server is configured for single sign-on via an OpenID
+    Connect or OAuth2 identity provider, you will need to add
+    `[synapse public baseurl]/_synapse/client/oidc/callback` to the list
+    of permitted "redirect URIs" at the identity provider.
+
+    See the [OpenID docs](../openid.md) for more information on setting
+    up OpenID Connect.
+
+-   If your server is configured for single sign-on via a SAML2 identity
+    provider, you will need to add
+    `[synapse public baseurl]/_synapse/client/saml2/authn_response` as a
+    permitted "ACS location" (also known as "allowed callback URLs")
+    at the identity provider.
+
+    The "Issuer" in the "AuthnRequest" to the SAML2 identity
+    provider is also updated to
+    `[synapse public baseurl]/_synapse/client/saml2/metadata.xml`. If
+    your SAML2 identity provider uses this property to validate or
+    otherwise identify Synapse, its configuration will need to be
+    updated to use the new URL. Alternatively you could create a new,
+    separate "EntityDescriptor" in your SAML2 identity provider with
+    the new URLs and leave the URLs in the existing "EntityDescriptor"
+    as they were.
+
+## Changes to HTML templates
+
+The HTML templates for SSO and email notifications now have [Jinja2's
+autoescape](https://jinja.palletsprojects.com/en/2.11.x/api/#autoescaping)
+enabled for files ending in `.html`, `.htm`, and `.xml`. If you have
+customised these templates and see issues when viewing them you might
+need to update them. It is expected that most configurations will need
+no changes.
+
+If you have customised the templates *names* for these templates, it is
+recommended to verify they end in `.html` to ensure autoescape is
+enabled.
+
+The above applies to the following templates:
+
+-   `add_threepid.html`
+-   `add_threepid_failure.html`
+-   `add_threepid_success.html`
+-   `notice_expiry.html`
+-   `notice_expiry.html`
+-   `notif_mail.html` (which, by default, includes `room.html` and
+    `notif.html`)
+-   `password_reset.html`
+-   `password_reset_confirmation.html`
+-   `password_reset_failure.html`
+-   `password_reset_success.html`
+-   `registration.html`
+-   `registration_failure.html`
+-   `registration_success.html`
+-   `sso_account_deactivated.html`
+-   `sso_auth_bad_user.html`
+-   `sso_auth_confirm.html`
+-   `sso_auth_success.html`
+-   `sso_error.html`
+-   `sso_login_idp_picker.html`
+-   `sso_redirect_confirm.html`
+
+# Upgrading to v1.26.0
+
+## Rolling back to v1.25.0 after a failed upgrade
+
+v1.26.0 includes a lot of large changes. If something problematic
+occurs, you may want to roll-back to a previous version of Synapse.
+Because v1.26.0 also includes a new database schema version, reverting
+that version is also required alongside the generic rollback
+instructions mentioned above. In short, to roll back to v1.25.0 you need
+to:
+
+1.  Stop the server
+
+2.  Decrease the schema version in the database:
+
+    ```sql
+    UPDATE schema_version SET version = 58;
+    ```
+
+3.  Delete the ignored users & chain cover data:
+
+    ```sql
+    DROP TABLE IF EXISTS ignored_users;
+    UPDATE rooms SET has_auth_chain_index = false;
+    ```
+
+    For PostgreSQL run:
+
+    ```sql
+    TRUNCATE event_auth_chain_links;
+    TRUNCATE event_auth_chains;
+    ```
+
+    For SQLite run:
+
+    ```sql
+    DELETE FROM event_auth_chain_links;
+    DELETE FROM event_auth_chains;
+    ```
+
+4.  Mark the deltas as not run (so they will re-run on upgrade).
+
+    ```sql
+    DELETE FROM applied_schema_deltas WHERE version = 59 AND file = "59/01ignored_user.py";
+    DELETE FROM applied_schema_deltas WHERE version = 59 AND file = "59/06chain_cover_index.sql";
+    ```
+
+5.  Downgrade Synapse by following the instructions for your
+    installation method in the "Rolling back to older versions"
+    section above.
+
+# Upgrading to v1.25.0
+
+## Last release supporting Python 3.5
+
+This is the last release of Synapse which guarantees support with Python
+3.5, which passed its upstream End of Life date several months ago.
+
+We will attempt to maintain support through March 2021, but without
+guarantees.
+
+In the future, Synapse will follow upstream schedules for ending support
+of older versions of Python and PostgreSQL. Please upgrade to at least
+Python 3.6 and PostgreSQL 9.6 as soon as possible.
+
+## Blacklisting IP ranges
+
+Synapse v1.25.0 includes new settings, `ip_range_blacklist` and
+`ip_range_whitelist`, for controlling outgoing requests from Synapse for
+federation, identity servers, push, and for checking key validity for
+third-party invite events. The previous setting,
+`federation_ip_range_blacklist`, is deprecated. The new
+`ip_range_blacklist` defaults to private IP ranges if it is not defined.
+
+If you have never customised `federation_ip_range_blacklist` it is
+recommended that you remove that setting.
+
+If you have customised `federation_ip_range_blacklist` you should update
+the setting name to `ip_range_blacklist`.
+
+If you have a custom push server that is reached via private IP space
+you may need to customise `ip_range_blacklist` or `ip_range_whitelist`.
+
+# Upgrading to v1.24.0
+
+## Custom OpenID Connect mapping provider breaking change
+
+This release allows the OpenID Connect mapping provider to perform
+normalisation of the localpart of the Matrix ID. This allows for the
+mapping provider to specify different algorithms, instead of the
+[default
+way](<https://matrix.org/docs/spec/appendices#mapping-from-other-character-sets>).
+
+If your Synapse configuration uses a custom mapping provider
+([oidc_config.user_mapping_provider.module]{.title-ref} is specified and
+not equal to
+[synapse.handlers.oidc_handler.JinjaOidcMappingProvider]{.title-ref})
+then you *must* ensure that [map_user_attributes]{.title-ref} of the
+mapping provider performs some normalisation of the
+[localpart]{.title-ref} returned. To match previous behaviour you can
+use the [map_username_to_mxid_localpart]{.title-ref} function provided
+by Synapse. An example is shown below:
+
+```python
+from synapse.types import map_username_to_mxid_localpart
+
+class MyMappingProvider:
+    def map_user_attributes(self, userinfo, token):
+        # ... your custom logic ...
+        sso_user_id = ...
+        localpart = map_username_to_mxid_localpart(sso_user_id)
+
+        return {"localpart": localpart}
+```
+
+## Removal historical Synapse Admin API
+
+Historically, the Synapse Admin API has been accessible under:
+
+-   `/_matrix/client/api/v1/admin`
+-   `/_matrix/client/unstable/admin`
+-   `/_matrix/client/r0/admin`
+-   `/_synapse/admin/v1`
+
+The endpoints with `/_matrix/client/*` prefixes have been removed as of
+v1.24.0. The Admin API is now only accessible under:
+
+-   `/_synapse/admin/v1`
+
+The only exception is the [/admin/whois]{.title-ref} endpoint, which is
+[also available via the client-server
+API](https://matrix.org/docs/spec/client_server/r0.6.1#get-matrix-client-r0-admin-whois-userid).
+
+The deprecation of the old endpoints was announced with Synapse 1.20.0
+(released on 2020-09-22) and makes it easier for homeserver admins to
+lock down external access to the Admin API endpoints.
+
+# Upgrading to v1.23.0
+
+## Structured logging configuration breaking changes
+
+This release deprecates use of the `structured: true` logging
+configuration for structured logging. If your logging configuration
+contains `structured: true` then it should be modified based on the
+[structured logging
+documentation](../structured_logging.md).
+
+The `structured` and `drains` logging options are now deprecated and
+should be replaced by standard logging configuration of `handlers` and
+`formatters`.
+
+A future will release of Synapse will make using `structured: true` an
+error.
+
+# Upgrading to v1.22.0
+
+## ThirdPartyEventRules breaking changes
+
+This release introduces a backwards-incompatible change to modules
+making use of `ThirdPartyEventRules` in Synapse. If you make use of a
+module defined under the `third_party_event_rules` config option, please
+make sure it is updated to handle the below change:
+
+The `http_client` argument is no longer passed to modules as they are
+initialised. Instead, modules are expected to make use of the
+`http_client` property on the `ModuleApi` class. Modules are now passed
+a `module_api` argument during initialisation, which is an instance of
+`ModuleApi`. `ModuleApi` instances have a `http_client` property which
+acts the same as the `http_client` argument previously passed to
+`ThirdPartyEventRules` modules.
+
+# Upgrading to v1.21.0
+
+## Forwarding `/_synapse/client` through your reverse proxy
+
+The [reverse proxy
+documentation](https://github.com/matrix-org/synapse/blob/develop/docs/reverse_proxy.md)
+has been updated to include reverse proxy directives for
+`/_synapse/client/*` endpoints. As the user password reset flow now uses
+endpoints under this prefix, **you must update your reverse proxy
+configurations for user password reset to work**.
+
+Additionally, note that the [Synapse worker documentation](https://github.com/matrix-org/synapse/blob/develop/docs/workers.md) has been updated to
+
+:   state that the `/_synapse/client/password_reset/email/submit_token`
+    endpoint can be handled
+
+by all workers. If you make use of Synapse's worker feature, please
+update your reverse proxy configuration to reflect this change.
+
+## New HTML templates
+
+A new HTML template,
+[password_reset_confirmation.html](https://github.com/matrix-org/synapse/blob/develop/synapse/res/templates/password_reset_confirmation.html),
+has been added to the `synapse/res/templates` directory. If you are
+using a custom template directory, you may want to copy the template
+over and modify it.
+
+Note that as of v1.20.0, templates do not need to be included in custom
+template directories for Synapse to start. The default templates will be
+used if a custom template cannot be found.
+
+This page will appear to the user after clicking a password reset link
+that has been emailed to them.
+
+To complete password reset, the page must include a way to make a
+[POST]{.title-ref} request to
+`/_synapse/client/password_reset/{medium}/submit_token` with the query
+parameters from the original link, presented as a URL-encoded form. See
+the file itself for more details.
+
+## Updated Single Sign-on HTML Templates
+
+The `saml_error.html` template was removed from Synapse and replaced
+with the `sso_error.html` template. If your Synapse is configured to use
+SAML and a custom `sso_redirect_confirm_template_dir` configuration then
+any customisations of the `saml_error.html` template will need to be
+merged into the `sso_error.html` template. These templates are similar,
+but the parameters are slightly different:
+
+-   The `msg` parameter should be renamed to `error_description`.
+-   There is no longer a `code` parameter for the response code.
+-   A string `error` parameter is available that includes a short hint
+    of why a user is seeing the error page.
+
+# Upgrading to v1.18.0
+
+## Docker [-py3]{.title-ref} suffix will be removed in future versions
+
+From 10th August 2020, we will no longer publish Docker images with the
+[-py3]{.title-ref} tag suffix. The images tagged with the
+[-py3]{.title-ref} suffix have been identical to the non-suffixed tags
+since release 0.99.0, and the suffix is obsolete.
+
+On 10th August, we will remove the [latest-py3]{.title-ref} tag.
+Existing per-release tags (such as [v1.18.0-py3]{.title-ref}) will not
+be removed, but no new [-py3]{.title-ref} tags will be added.
+
+Scripts relying on the [-py3]{.title-ref} suffix will need to be
+updated.
+
+## Redis replication is now recommended in lieu of TCP replication
+
+When setting up worker processes, we now recommend the use of a Redis
+server for replication. **The old direct TCP connection method is
+deprecated and will be removed in a future release.** See
+[workers](../workers.md) for more details.
+
+# Upgrading to v1.14.0
+
+This version includes a database update which is run as part of the
+upgrade, and which may take a couple of minutes in the case of a large
+server. Synapse will not respond to HTTP requests while this update is
+taking place.
+
+# Upgrading to v1.13.0
+
+## Incorrect database migration in old synapse versions
+
+A bug was introduced in Synapse 1.4.0 which could cause the room
+directory to be incomplete or empty if Synapse was upgraded directly
+from v1.2.1 or earlier, to versions between v1.4.0 and v1.12.x.
+
+This will *not* be a problem for Synapse installations which were:
+
+:   -   created at v1.4.0 or later,
+    -   upgraded via v1.3.x, or
+    -   upgraded straight from v1.2.1 or earlier to v1.13.0 or later.
+
+If completeness of the room directory is a concern, installations which
+are affected can be repaired as follows:
+
+1.  Run the following sql from a [psql]{.title-ref} or
+    [sqlite3]{.title-ref} console:
+
+    ```sql
+    INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
+       ('populate_stats_process_rooms', '{}', 'current_state_events_membership');
+
+    INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
+       ('populate_stats_process_users', '{}', 'populate_stats_process_rooms');
+    ```
+
+2.  Restart synapse.
+
+## New Single Sign-on HTML Templates
+
+New templates (`sso_auth_confirm.html`, `sso_auth_success.html`, and
+`sso_account_deactivated.html`) were added to Synapse. If your Synapse
+is configured to use SSO and a custom
+`sso_redirect_confirm_template_dir` configuration then these templates
+will need to be copied from
+[synapse/res/templates](synapse/res/templates) into that directory.
+
+## Synapse SSO Plugins Method Deprecation
+
+Plugins using the `complete_sso_login` method of
+`synapse.module_api.ModuleApi` should update to using the async/await
+version `complete_sso_login_async` which includes additional checks. The
+non-async version is considered deprecated.
+
+## Rolling back to v1.12.4 after a failed upgrade
+
+v1.13.0 includes a lot of large changes. If something problematic
+occurs, you may want to roll-back to a previous version of Synapse.
+Because v1.13.0 also includes a new database schema version, reverting
+that version is also required alongside the generic rollback
+instructions mentioned above. In short, to roll back to v1.12.4 you need
+to:
+
+1.  Stop the server
+
+2.  Decrease the schema version in the database:
+
+    ```sql
+    UPDATE schema_version SET version = 57;
+    ```
+
+3.  Downgrade Synapse by following the instructions for your
+    installation method in the "Rolling back to older versions"
+    section above.
+
+# Upgrading to v1.12.0
+
+This version includes a database update which is run as part of the
+upgrade, and which may take some time (several hours in the case of a
+large server). Synapse will not respond to HTTP requests while this
+update is taking place.
+
+This is only likely to be a problem in the case of a server which is
+participating in many rooms.
+
+0.  As with all upgrades, it is recommended that you have a recent
+    backup of your database which can be used for recovery in the event
+    of any problems.
+
+1.  As an initial check to see if you will be affected, you can try
+    running the following query from the [psql]{.title-ref} or
+    [sqlite3]{.title-ref} console. It is safe to run it while Synapse is
+    still running.
+
+    ```sql
+    SELECT MAX(q.v) FROM (
+      SELECT (
+        SELECT ej.json AS v
+        FROM state_events se INNER JOIN event_json ej USING (event_id)
+        WHERE se.room_id=rooms.room_id AND se.type='m.room.create' AND se.state_key=''
+        LIMIT 1
+      ) FROM rooms WHERE rooms.room_version IS NULL
+    ) q;
+    ```
+
+    This query will take about the same amount of time as the upgrade
+    process: ie, if it takes 5 minutes, then it is likely that Synapse
+    will be unresponsive for 5 minutes during the upgrade.
+
+    If you consider an outage of this duration to be acceptable, no
+    further action is necessary and you can simply start Synapse 1.12.0.
+
+    If you would prefer to reduce the downtime, continue with the steps
+    below.
+
+2.  The easiest workaround for this issue is to manually create a new
+    index before upgrading. On PostgreSQL, his can be done as follows:
+
+    ```sql
+    CREATE INDEX CONCURRENTLY tmp_upgrade_1_12_0_index
+    ON state_events(room_id) WHERE type = 'm.room.create';
+    ```
+
+    The above query may take some time, but is also safe to run while
+    Synapse is running.
+
+    We assume that no SQLite users have databases large enough to be
+    affected. If you *are* affected, you can run a similar query,
+    omitting the `CONCURRENTLY` keyword. Note however that this
+    operation may in itself cause Synapse to stop running for some time.
+    Synapse admins are reminded that [SQLite is not recommended for use
+    outside a test
+    environment](https://github.com/matrix-org/synapse/blob/master/README.rst#using-postgresql).
+
+3.  Once the index has been created, the `SELECT` query in step 1 above
+    should complete quickly. It is therefore safe to upgrade to Synapse
+    1.12.0.
+
+4.  Once Synapse 1.12.0 has successfully started and is responding to
+    HTTP requests, the temporary index can be removed:
+
+    ```sql
+    DROP INDEX tmp_upgrade_1_12_0_index;
+    ```
+
+# Upgrading to v1.10.0
+
+Synapse will now log a warning on start up if used with a PostgreSQL
+database that has a non-recommended locale set.
+
+See [Postgres](../postgres.md) for details.
+
+# Upgrading to v1.8.0
+
+Specifying a `log_file` config option will now cause Synapse to refuse
+to start, and should be replaced by with the `log_config` option.
+Support for the `log_file` option was removed in v1.3.0 and has since
+had no effect.
+
+# Upgrading to v1.7.0
+
+In an attempt to configure Synapse in a privacy preserving way, the
+default behaviours of `allow_public_rooms_without_auth` and
+`allow_public_rooms_over_federation` have been inverted. This means that
+by default, only authenticated users querying the Client/Server API will
+be able to query the room directory, and relatedly that the server will
+not share room directory information with other servers over federation.
+
+If your installation does not explicitly set these settings one way or
+the other and you want either setting to be `true` then it will
+necessary to update your homeserver configuration file accordingly.
+
+For more details on the surrounding context see our
+[explainer](https://matrix.org/blog/2019/11/09/avoiding-unwelcome-visitors-on-private-matrix-servers).
+
+# Upgrading to v1.5.0
+
+This release includes a database migration which may take several
+minutes to complete if there are a large number (more than a million or
+so) of entries in the `devices` table. This is only likely to a be a
+problem on very large installations.
+
+# Upgrading to v1.4.0
+
+## New custom templates
+
+If you have configured a custom template directory with the
+`email.template_dir` option, be aware that there are new templates
+regarding registration and threepid management (see below) that must be
+included.
+
+-   `registration.html` and `registration.txt`
+-   `registration_success.html` and `registration_failure.html`
+-   `add_threepid.html` and `add_threepid.txt`
+-   `add_threepid_failure.html` and `add_threepid_success.html`
+
+Synapse will expect these files to exist inside the configured template
+directory, and **will fail to start** if they are absent. To view the
+default templates, see
+[synapse/res/templates](https://github.com/matrix-org/synapse/tree/master/synapse/res/templates).
+
+## 3pid verification changes
+
+**Note: As of this release, users will be unable to add phone numbers or
+email addresses to their accounts, without changes to the Synapse
+configuration. This includes adding an email address during
+registration.**
+
+It is possible for a user to associate an email address or phone number
+with their account, for a number of reasons:
+
+-   for use when logging in, as an alternative to the user id.
+-   in the case of email, as an alternative contact to help with account
+    recovery.
+-   in the case of email, to receive notifications of missed messages.
+
+Before an email address or phone number can be added to a user's
+account, or before such an address is used to carry out a
+password-reset, Synapse must confirm the operation with the owner of the
+email address or phone number. It does this by sending an email or text
+giving the user a link or token to confirm receipt. This process is
+known as '3pid verification'. ('3pid', or 'threepid', stands for
+third-party identifier, and we use it to refer to external identifiers
+such as email addresses and phone numbers.)
+
+Previous versions of Synapse delegated the task of 3pid verification to
+an identity server by default. In most cases this server is `vector.im`
+or `matrix.org`.
+
+In Synapse 1.4.0, for security and privacy reasons, the homeserver will
+no longer delegate this task to an identity server by default. Instead,
+the server administrator will need to explicitly decide how they would
+like the verification messages to be sent.
+
+In the medium term, the `vector.im` and `matrix.org` identity servers
+will disable support for delegated 3pid verification entirely. However,
+in order to ease the transition, they will retain the capability for a
+limited period. Delegated email verification will be disabled on Monday
+2nd December 2019 (giving roughly 2 months notice). Disabling delegated
+SMS verification will follow some time after that once SMS verification
+support lands in Synapse.
+
+Once delegated 3pid verification support has been disabled in the
+`vector.im` and `matrix.org` identity servers, all Synapse versions that
+depend on those instances will be unable to verify email and phone
+numbers through them. There are no imminent plans to remove delegated
+3pid verification from Sydent generally. (Sydent is the identity server
+project that backs the `vector.im` and `matrix.org` instances).
+
+### Email
+
+Following upgrade, to continue verifying email (e.g. as part of the
+registration process), admins can either:-
+
+-   Configure Synapse to use an email server.
+-   Run or choose an identity server which allows delegated email
+    verification and delegate to it.
+
+#### Configure SMTP in Synapse
+
+To configure an SMTP server for Synapse, modify the configuration
+section headed `email`, and be sure to have at least the
+`smtp_host, smtp_port` and `notif_from` fields filled out.
+
+You may also need to set `smtp_user`, `smtp_pass`, and
+`require_transport_security`.
+
+See the [sample configuration file](docs/sample_config.yaml) for more
+details on these settings.
+
+#### Delegate email to an identity server
+
+Some admins will wish to continue using email verification as part of
+the registration process, but will not immediately have an appropriate
+SMTP server at hand.
+
+To this end, we will continue to support email verification delegation
+via the `vector.im` and `matrix.org` identity servers for two months.
+Support for delegated email verification will be disabled on Monday 2nd
+December.
+
+The `account_threepid_delegates` dictionary defines whether the
+homeserver should delegate an external server (typically an [identity
+server](https://matrix.org/docs/spec/identity_service/r0.2.1)) to handle
+sending confirmation messages via email and SMS.
+
+So to delegate email verification, in `homeserver.yaml`, set
+`account_threepid_delegates.email` to the base URL of an identity
+server. For example:
+
+```yaml
+account_threepid_delegates:
+    email: https://example.com     # Delegate email sending to example.com
+```
+
+Note that `account_threepid_delegates.email` replaces the deprecated
+`email.trust_identity_server_for_password_resets`: if
+`email.trust_identity_server_for_password_resets` is set to `true`, and
+`account_threepid_delegates.email` is not set, then the first entry in
+`trusted_third_party_id_servers` will be used as the
+`account_threepid_delegate` for email. This is to ensure compatibility
+with existing Synapse installs that set up external server handling for
+these tasks before v1.4.0. If
+`email.trust_identity_server_for_password_resets` is `true` and no
+trusted identity server domains are configured, Synapse will report an
+error and refuse to start.
+
+If `email.trust_identity_server_for_password_resets` is `false` or
+absent and no `email` delegate is configured in
+`account_threepid_delegates`, then Synapse will send email verification
+messages itself, using the configured SMTP server (see above). that
+type.
+
+### Phone numbers
+
+Synapse does not support phone-number verification itself, so the only
+way to maintain the ability for users to add phone numbers to their
+accounts will be by continuing to delegate phone number verification to
+the `matrix.org` and `vector.im` identity servers (or another identity
+server that supports SMS sending).
+
+The `account_threepid_delegates` dictionary defines whether the
+homeserver should delegate an external server (typically an [identity
+server](https://matrix.org/docs/spec/identity_service/r0.2.1)) to handle
+sending confirmation messages via email and SMS.
+
+So to delegate phone number verification, in `homeserver.yaml`, set
+`account_threepid_delegates.msisdn` to the base URL of an identity
+server. For example:
+
+```yaml
+account_threepid_delegates:
+    msisdn: https://example.com     # Delegate sms sending to example.com
+```
+
+The `matrix.org` and `vector.im` identity servers will continue to
+support delegated phone number verification via SMS until such time as
+it is possible for admins to configure their servers to perform phone
+number verification directly. More details will follow in a future
+release.
+
+## Rolling back to v1.3.1
+
+If you encounter problems with v1.4.0, it should be possible to roll
+back to v1.3.1, subject to the following:
+
+-   The 'room statistics' engine was heavily reworked in this release
+    (see [#5971](https://github.com/matrix-org/synapse/pull/5971)),
+    including significant changes to the database schema, which are not
+    easily reverted. This will cause the room statistics engine to stop
+    updating when you downgrade.
+
+    The room statistics are essentially unused in v1.3.1 (in future
+    versions of Synapse, they will be used to populate the room
+    directory), so there should be no loss of functionality. However,
+    the statistics engine will write errors to the logs, which can be
+    avoided by setting the following in `homeserver.yaml`:
+
+    ```yaml
+    stats:
+      enabled: false
+    ```
+
+    Don't forget to re-enable it when you upgrade again, in preparation
+    for its use in the room directory!
+
+# Upgrading to v1.2.0
+
+Some counter metrics have been renamed, with the old names deprecated.
+See [the metrics
+documentation](../metrics-howto.md#renaming-of-metrics--deprecation-of-old-names-in-12)
+for details.
+
+# Upgrading to v1.1.0
+
+Synapse v1.1.0 removes support for older Python and PostgreSQL versions,
+as outlined in [our deprecation
+notice](https://matrix.org/blog/2019/04/08/synapse-deprecating-postgres-9-4-and-python-2-x).
+
+## Minimum Python Version
+
+Synapse v1.1.0 has a minimum Python requirement of Python 3.5. Python
+3.6 or Python 3.7 are recommended as they have improved internal string
+handling, significantly reducing memory usage.
+
+If you use current versions of the Matrix.org-distributed Debian
+packages or Docker images, action is not required.
+
+If you install Synapse in a Python virtual environment, please see
+"Upgrading to v0.34.0" for notes on setting up a new virtualenv under
+Python 3.
+
+## Minimum PostgreSQL Version
+
+If using PostgreSQL under Synapse, you will need to use PostgreSQL 9.5
+or above. Please see the [PostgreSQL
+documentation](https://www.postgresql.org/docs/11/upgrading.html) for
+more details on upgrading your database.
+
+# Upgrading to v1.0
+
+## Validation of TLS certificates
+
+Synapse v1.0 is the first release to enforce validation of TLS
+certificates for the federation API. It is therefore essential that your
+certificates are correctly configured. See the
+[FAQ](../MSC1711_certificates_FAQ.md) for more information.
+
+Note, v1.0 installations will also no longer be able to federate with
+servers that have not correctly configured their certificates.
+
+In rare cases, it may be desirable to disable certificate checking: for
+example, it might be essential to be able to federate with a given
+legacy server in a closed federation. This can be done in one of two
+ways:-
+
+-   Configure the global switch `federation_verify_certificates` to
+    `false`.
+-   Configure a whitelist of server domains to trust via
+    `federation_certificate_verification_whitelist`.
+
+See the [sample configuration file](docs/sample_config.yaml) for more
+details on these settings.
+
+## Email
+
+When a user requests a password reset, Synapse will send an email to the
+user to confirm the request.
+
+Previous versions of Synapse delegated the job of sending this email to
+an identity server. If the identity server was somehow malicious or
+became compromised, it would be theoretically possible to hijack an
+account through this means.
+
+Therefore, by default, Synapse v1.0 will send the confirmation email
+itself. If Synapse is not configured with an SMTP server, password reset
+via email will be disabled.
+
+To configure an SMTP server for Synapse, modify the configuration
+section headed `email`, and be sure to have at least the `smtp_host`,
+`smtp_port` and `notif_from` fields filled out. You may also need to set
+`smtp_user`, `smtp_pass`, and `require_transport_security`.
+
+If you are absolutely certain that you wish to continue using an
+identity server for password resets, set
+`trust_identity_server_for_password_resets` to `true`.
+
+See the [sample configuration file](docs/sample_config.yaml) for more
+details on these settings.
+
+## New email templates
+
+Some new templates have been added to the default template directory for the purpose of
+the homeserver sending its own password reset emails. If you have configured a
+custom `template_dir` in your Synapse config, these files will need to be added.
+
+`password_reset.html` and `password_reset.txt` are HTML and plain text
+templates respectively that contain the contents of what will be emailed
+to the user upon attempting to reset their password via email.
+`password_reset_success.html` and `password_reset_failure.html` are HTML
+files that the content of which (assuming no redirect URL is set) will
+be shown to the user after they attempt to click the link in the email
+sent to them.
+
+# Upgrading to v0.99.0
+
+Please be aware that, before Synapse v1.0 is released around March 2019,
+you will need to replace any self-signed certificates with those
+verified by a root CA. Information on how to do so can be found at [the
+ACME docs](../ACME.md).
+
+For more information on configuring TLS certificates see the
+[FAQ](../MSC1711_certificates_FAQ.md).
+
+# Upgrading to v0.34.0
+
+1.  This release is the first to fully support Python 3. Synapse will
+    now run on Python versions 3.5, or 3.6 (as well as 2.7). We
+    recommend switching to Python 3, as it has been shown to give
+    performance improvements.
+
+    For users who have installed Synapse into a virtualenv, we recommend
+    doing this by creating a new virtualenv. For example:
+
+        virtualenv -p python3 ~/synapse/env3
+        source ~/synapse/env3/bin/activate
+        pip install matrix-synapse
+
+    You can then start synapse as normal, having activated the new
+    virtualenv:
+
+        cd ~/synapse
+        source env3/bin/activate
+        synctl start
+
+    Users who have installed from distribution packages should see the
+    relevant package documentation. See below for notes on Debian
+    packages.
+
+    -   When upgrading to Python 3, you **must** make sure that your log
+        files are configured as UTF-8, by adding `encoding: utf8` to the
+        `RotatingFileHandler` configuration (if you have one) in your
+        `<server>.log.config` file. For example, if your `log.config`
+        file contains:
+
+            handlers:
+              file:
+                class: logging.handlers.RotatingFileHandler
+                formatter: precise
+                filename: homeserver.log
+                maxBytes: 104857600
+                backupCount: 10
+                filters: [context]
+              console:
+                class: logging.StreamHandler
+                formatter: precise
+                filters: [context]
+
+        Then you should update this to be:
+
+            handlers:
+              file:
+                class: logging.handlers.RotatingFileHandler
+                formatter: precise
+                filename: homeserver.log
+                maxBytes: 104857600
+                backupCount: 10
+                filters: [context]
+                encoding: utf8
+              console:
+                class: logging.StreamHandler
+                formatter: precise
+                filters: [context]
+
+        There is no need to revert this change if downgrading to
+        Python 2.
+
+    We are also making available Debian packages which will run Synapse
+    on Python 3. You can switch to these packages with
+    `apt-get install matrix-synapse-py3`, however, please read
+    [debian/NEWS](https://github.com/matrix-org/synapse/blob/release-v0.34.0/debian/NEWS)
+    before doing so. The existing `matrix-synapse` packages will
+    continue to use Python 2 for the time being.
+
+2.  This release removes the `riot.im` from the default list of trusted
+    identity servers.
+
+    If `riot.im` is in your homeserver's list of
+    `trusted_third_party_id_servers`, you should remove it. It was added
+    in case a hypothetical future identity server was put there. If you
+    don't remove it, users may be unable to deactivate their accounts.
+
+3.  This release no longer installs the (unmaintained) Matrix Console
+    web client as part of the default installation. It is possible to
+    re-enable it by installing it separately and setting the
+    `web_client_location` config option, but please consider switching
+    to another client.
+
+# Upgrading to v0.33.7
+
+This release removes the example email notification templates from
+`res/templates` (they are now internal to the python package). This
+should only affect you if you (a) deploy your Synapse instance from a
+git checkout or a github snapshot URL, and (b) have email notifications
+enabled.
+
+If you have email notifications enabled, you should ensure that
+`email.template_dir` is either configured to point at a directory where
+you have installed customised templates, or leave it unset to use the
+default templates.
+
+# Upgrading to v0.27.3
+
+This release expands the anonymous usage stats sent if the opt-in
+`report_stats` configuration is set to `true`. We now capture RSS memory
+and cpu use at a very coarse level. This requires administrators to
+install the optional `psutil` python module.
+
+We would appreciate it if you could assist by ensuring this module is
+available and `report_stats` is enabled. This will let us see if
+performance changes to synapse are having an impact to the general
+community.
+
+# Upgrading to v0.15.0
+
+If you want to use the new URL previewing API
+(`/_matrix/media/r0/preview_url`) then you have to explicitly enable it
+in the config and update your dependencies dependencies. See README.rst
+for details.
+
+# Upgrading to v0.11.0
+
+This release includes the option to send anonymous usage stats to
+matrix.org, and requires that administrators explictly opt in or out by
+setting the `report_stats` option to either `true` or `false`.
+
+We would really appreciate it if you could help our project out by
+reporting anonymized usage statistics from your homeserver. Only very
+basic aggregate data (e.g. number of users) will be reported, but it
+helps us to track the growth of the Matrix community, and helps us to
+make Matrix a success, as well as to convince other networks that they
+should peer with us.
+
+# Upgrading to v0.9.0
+
+Application services have had a breaking API change in this version.
+
+They can no longer register themselves with a home server using the AS
+HTTP API. This decision was made because a compromised application
+service with free reign to register any regex in effect grants full
+read/write access to the home server if a regex of `.*` is used. An
+attack where a compromised AS re-registers itself with `.*` was deemed
+too big of a security risk to ignore, and so the ability to register
+with the HS remotely has been removed.
+
+It has been replaced by specifying a list of application service
+registrations in `homeserver.yaml`:
+
+    app_service_config_files: ["registration-01.yaml", "registration-02.yaml"]
+
+Where `registration-01.yaml` looks like:
+
+    url: <String>  # e.g. "https://my.application.service.com"
+    as_token: <String>
+    hs_token: <String>
+    sender_localpart: <String>  # This is a new field which denotes the user_id localpart when using the AS token
+    namespaces:
+      users:
+        - exclusive: <Boolean>
+          regex: <String>  # e.g. "@prefix_.*"
+      aliases:
+        - exclusive: <Boolean>
+          regex: <String>
+      rooms:
+        - exclusive: <Boolean>
+          regex: <String>
+
+# Upgrading to v0.8.0
+
+Servers which use captchas will need to add their public key to:
+
+    static/client/register/register_config.js
+
+      window.matrixRegistrationConfig = {
+          recaptcha_public_key: "YOUR_PUBLIC_KEY"
+      };
+
+This is required in order to support registration fallback (typically
+used on mobile devices).
+
+# Upgrading to v0.7.0
+
+New dependencies are:
+
+-   pydenticon
+-   simplejson
+-   syutil
+-   matrix-angular-sdk
+
+To pull in these dependencies in a virtual env, run:
+
+    python synapse/python_dependencies.py | xargs -n 1 pip install
+
+# Upgrading to v0.6.0
+
+To pull in new dependencies, run:
+
+    python setup.py develop --user
+
+This update includes a change to the database schema. To upgrade you
+first need to upgrade the database by running:
+
+    python scripts/upgrade_db_to_v0.6.0.py <db> <server_name> <signing_key>
+
+Where [<db>]{.title-ref} is the location of the database,
+[<server_name>]{.title-ref} is the server name as specified in the
+synapse configuration, and [<signing_key>]{.title-ref} is the location
+of the signing key as specified in the synapse configuration.
+
+This may take some time to complete. Failures of signatures and content
+hashes can safely be ignored.
+
+# Upgrading to v0.5.1
+
+Depending on precisely when you installed v0.5.0 you may have ended up
+with a stale release of the reference matrix webclient installed as a
+python module. To uninstall it and ensure you are depending on the
+latest module, please run:
+
+    $ pip uninstall syweb
+
+# Upgrading to v0.5.0
+
+The webclient has been split out into a seperate repository/pacakage in
+this release. Before you restart your homeserver you will need to pull
+in the webclient package by running:
+
+    python setup.py develop --user
+
+This release completely changes the database schema and so requires
+upgrading it before starting the new version of the homeserver.
+
+The script "database-prepare-for-0.5.0.sh" should be used to upgrade
+the database. This will save all user information, such as logins and
+profiles, but will otherwise purge the database. This includes messages,
+which rooms the home server was a member of and room alias mappings.
+
+If you would like to keep your history, please take a copy of your
+database file and ask for help in #matrix:matrix.org. The upgrade
+process is, unfortunately, non trivial and requires human intervention
+to resolve any resulting conflicts during the upgrade process.
+
+Before running the command the homeserver should be first completely
+shutdown. To run it, simply specify the location of the database, e.g.:
+
+> ./scripts/database-prepare-for-0.5.0.sh "homeserver.db"
+
+Once this has successfully completed it will be safe to restart the
+homeserver. You may notice that the homeserver takes a few seconds
+longer to restart than usual as it reinitializes the database.
+
+On startup of the new version, users can either rejoin remote rooms
+using room aliases or by being reinvited. Alternatively, if any other
+homeserver sends a message to a room that the homeserver was previously
+in the local HS will automatically rejoin the room.
+
+# Upgrading to v0.4.0
+
+This release needs an updated syutil version. Run:
+
+    python setup.py develop
+
+You will also need to upgrade your configuration as the signing key
+format has changed. Run:
+
+    python -m synapse.app.homeserver --config-path <CONFIG> --generate-config
+
+# Upgrading to v0.3.0
+
+This registration API now closely matches the login API. This introduces
+a bit more backwards and forwards between the HS and the client, but
+this improves the overall flexibility of the API. You can now GET on
+/register to retrieve a list of valid registration flows. Upon choosing
+one, they are submitted in the same way as login, e.g:
+
+    {
+      type: m.login.password,
+      user: foo,
+      password: bar
+    }
+
+The default HS supports 2 flows, with and without Identity Server email
+authentication. Enabling captcha on the HS will add in an extra step to
+all flows: `m.login.recaptcha` which must be completed before you can
+transition to the next stage. There is a new login type:
+`m.login.email.identity` which contains the `threepidCreds` key which
+were previously sent in the original register request. For more
+information on this, see the specification.
+
+## Web Client
+
+The VoIP specification has changed between v0.2.0 and v0.3.0. Users
+should refresh any browser tabs to get the latest web client code. Users
+on v0.2.0 of the web client will not be able to call those on v0.3.0 and
+vice versa.
+
+# Upgrading to v0.2.0
+
+The home server now requires setting up of SSL config before it can run.
+To automatically generate default config use:
+
+    $ python synapse/app/homeserver.py \
+        --server-name machine.my.domain.name \
+        --bind-port 8448 \
+        --config-path homeserver.config \
+        --generate-config
+
+This config can be edited if desired, for example to specify a different
+SSL certificate to use. Once done you can run the home server using:
+
+    $ python synapse/app/homeserver.py --config-path homeserver.config
+
+See the README.rst for more information.
+
+Also note that some config options have been renamed, including:
+
+-   "host" to "server-name"
+-   "database" to "database-path"
+-   "port" to "bind-port" and "unsecure-port"
+
+# Upgrading to v0.0.1
+
+This release completely changes the database schema and so requires
+upgrading it before starting the new version of the homeserver.
+
+The script "database-prepare-for-0.0.1.sh" should be used to upgrade
+the database. This will save all user information, such as logins and
+profiles, but will otherwise purge the database. This includes messages,
+which rooms the home server was a member of and room alias mappings.
+
+Before running the command the homeserver should be first completely
+shutdown. To run it, simply specify the location of the database, e.g.:
+
+> ./scripts/database-prepare-for-0.0.1.sh "homeserver.db"
+
+Once this has successfully completed it will be safe to restart the
+homeserver. You may notice that the homeserver takes a few seconds
+longer to restart than usual as it reinitializes the database.
+
+On startup of the new version, users can either rejoin remote rooms
+using room aliases or by being reinvited. Alternatively, if any other
+homeserver sends a message to a room that the homeserver was previously
+in the local HS will automatically rejoin the room.