diff options
Diffstat (limited to 'docs/sample_config.yaml')
| -rw-r--r-- | docs/sample_config.yaml | 233 |
1 files changed, 162 insertions, 71 deletions
diff --git a/docs/sample_config.yaml b/docs/sample_config.yaml index e71bd782b0..3439aa3594 100644 --- a/docs/sample_config.yaml +++ b/docs/sample_config.yaml @@ -119,7 +119,7 @@ pid_file: DATADIR/homeserver.pid # For example, for room version 1, default_room_version should be set # to "1". # -#default_room_version: "5" +#default_room_version: "6" # The GC threshold parameters to pass to `gc.set_threshold`, if defined # @@ -893,7 +893,7 @@ media_store_path: "DATADIR/media_store" # The largest allowed upload size in bytes # -#max_upload_size: 10M +#max_upload_size: 50M # Maximum number of pixels that will be thumbnailed # @@ -1235,8 +1235,9 @@ account_validity: # email will be globally disabled. # # Additionally, if `msisdn` is not set, registration and password resets via msisdn -# will be disabled regardless. This is due to Synapse currently not supporting any -# method of sending SMS messages on its own. +# will be disabled regardless, and users will not be able to associate an msisdn +# identifier to their account. This is due to Synapse currently not supporting +# any method of sending SMS messages on its own. # # To enable using an identity server for operations regarding a particular third-party # identifier type, set the value to the URL of that identity server as shown in the @@ -1510,10 +1511,8 @@ trusted_key_servers: ## Single sign-on integration ## -# Enable SAML2 for registration and login. Uses pysaml2. -# -# At least one of `sp_config` or `config_path` must be set in this section to -# enable SAML login. +# The following settings can be used to make Synapse use a single sign-on +# provider for authentication, instead of its internal password database. # # You will probably also want to set the following options to `false` to # disable the regular login/registration flows: @@ -1522,6 +1521,11 @@ trusted_key_servers: # # You will also want to investigate the settings under the "sso" configuration # section below. + +# Enable SAML2 for registration and login. Uses pysaml2. +# +# At least one of `sp_config` or `config_path` must be set in this section to +# enable SAML login. # # Once SAML support is enabled, a metadata file will be exposed at # https://<server>:<port>/_matrix/saml2/metadata.xml, which you may be able to @@ -1537,40 +1541,70 @@ saml2_config: # so it is not normally necessary to specify them unless you need to # override them. # - #sp_config: - # # point this to the IdP's metadata. You can use either a local file or - # # (preferably) a URL. - # metadata: - # #local: ["saml2/idp.xml"] - # remote: - # - url: https://our_idp/metadata.xml - # - # # By default, the user has to go to our login page first. If you'd like - # # to allow IdP-initiated login, set 'allow_unsolicited: true' in a - # # 'service.sp' section: - # # - # #service: - # # sp: - # # allow_unsolicited: true - # - # # The examples below are just used to generate our metadata xml, and you - # # may well not need them, depending on your setup. Alternatively you - # # may need a whole lot more detail - see the pysaml2 docs! - # - # description: ["My awesome SP", "en"] - # name: ["Test SP", "en"] - # - # organization: - # name: Example com - # display_name: - # - ["Example co", "en"] - # url: "http://example.com" - # - # contact_person: - # - given_name: Bob - # sur_name: "the Sysadmin" - # email_address": ["admin@example.com"] - # contact_type": technical + sp_config: + # Point this to the IdP's metadata. You must provide either a local + # file via the `local` attribute or (preferably) a URL via the + # `remote` attribute. + # + #metadata: + # local: ["saml2/idp.xml"] + # remote: + # - url: https://our_idp/metadata.xml + + # Allowed clock difference in seconds between the homeserver and IdP. + # + # Uncomment the below to increase the accepted time difference from 0 to 3 seconds. + # + #accepted_time_diff: 3 + + # By default, the user has to go to our login page first. If you'd like + # to allow IdP-initiated login, set 'allow_unsolicited: true' in a + # 'service.sp' section: + # + #service: + # sp: + # allow_unsolicited: true + + # The examples below are just used to generate our metadata xml, and you + # may well not need them, depending on your setup. Alternatively you + # may need a whole lot more detail - see the pysaml2 docs! + + #description: ["My awesome SP", "en"] + #name: ["Test SP", "en"] + + #ui_info: + # display_name: + # - lang: en + # text: "Display Name is the descriptive name of your service." + # description: + # - lang: en + # text: "Description should be a short paragraph explaining the purpose of the service." + # information_url: + # - lang: en + # text: "https://example.com/terms-of-service" + # privacy_statement_url: + # - lang: en + # text: "https://example.com/privacy-policy" + # keywords: + # - lang: en + # text: ["Matrix", "Element"] + # logo: + # - lang: en + # text: "https://example.com/logo.svg" + # width: "200" + # height: "80" + + #organization: + # name: Example com + # display_name: + # - ["Example co", "en"] + # url: "http://example.com" + + #contact_person: + # - given_name: Bob + # sur_name: "the Sysadmin" + # email_address": ["admin@example.com"] + # contact_type": technical # Instead of putting the config inline as above, you can specify a # separate pysaml2 configuration file: @@ -1645,12 +1679,19 @@ saml2_config: # - attribute: department # value: "sales" + # If the metadata XML contains multiple IdP entities then the `idp_entityid` + # option must be set to the entity to redirect users to. + # + # Most deployments only have a single IdP entity and so should omit this + # option. + # + #idp_entityid: 'https://our_idp/entityid' + -# OpenID Connect integration. The following settings can be used to make Synapse -# use an OpenID Connect Provider for authentication, instead of its internal -# password database. +# Enable OpenID Connect (OIDC) / OAuth 2.0 for registration and login. # -# See https://github.com/matrix-org/synapse/blob/master/docs/openid.md. +# See https://github.com/matrix-org/synapse/blob/master/docs/openid.md +# for some example configurations. # oidc_config: # Uncomment the following to enable authorization against an OpenID Connect @@ -1719,6 +1760,14 @@ oidc_config: # #skip_verification: true + # Whether to fetch the user profile from the userinfo endpoint. Valid + # values are: "auto" or "userinfo_endpoint". + # + # Defaults to "auto", which fetches the userinfo endpoint if "openid" is included + # in `scopes`. Uncomment the following to always fetch the userinfo endpoint. + # + #user_profile_method: "userinfo_endpoint" + # Uncomment to allow a user logging in via OIDC to match a pre-existing account instead # of failing. This could be used if switching from password logins to OIDC. Defaults to false. # @@ -1775,15 +1824,37 @@ oidc_config: -# Enable CAS for registration and login. +# Enable Central Authentication Service (CAS) for registration and login. # -#cas_config: -# enabled: true -# server_url: "https://cas-server.com" -# service_url: "https://homeserver.domain.com:8448" -# #displayname_attribute: name -# #required_attributes: -# # name: value +cas_config: + # Uncomment the following to enable authorization against a CAS server. + # Defaults to false. + # + #enabled: true + + # The URL of the CAS authorization endpoint. + # + #server_url: "https://cas-server.com" + + # The public URL of the homeserver. + # + #service_url: "https://homeserver.domain.com:8448" + + # The attribute of the CAS response to use as the display name. + # + # If unset, no displayname will be set. + # + #displayname_attribute: name + + # It is possible to configure Synapse to only allow logins if CAS attributes + # match particular values. All of the keys in the mapping below must exist + # and the values must match the given value. Alternately if the given value + # is None then any value is allowed (the attribute just must exist). + # All of the listed attributes must match for the login to be permitted. + # + #required_attributes: + # userGroup: "staff" + # department: None # Additional settings to use with single-sign on systems such as OpenID Connect, @@ -1883,7 +1954,7 @@ sso: # and issued at ("iat") claims are validated if present. # # Note that this is a non-standard login type and client support is -# expected to be non-existant. +# expected to be non-existent. # # See https://github.com/matrix-org/synapse/blob/master/docs/jwt.md. # @@ -2185,20 +2256,35 @@ password_providers: -# Clients requesting push notifications can either have the body of -# the message sent in the notification poke along with other details -# like the sender, or just the event ID and room ID (`event_id_only`). -# If clients choose the former, this option controls whether the -# notification request includes the content of the event (other details -# like the sender are still included). For `event_id_only` push, it -# has no effect. -# -# For modern android devices the notification content will still appear -# because it is loaded by the app. iPhone, however will send a -# notification saying only that a message arrived and who it came from. -# -#push: -# include_content: true +## Push ## + +push: + # Clients requesting push notifications can either have the body of + # the message sent in the notification poke along with other details + # like the sender, or just the event ID and room ID (`event_id_only`). + # If clients choose the former, this option controls whether the + # notification request includes the content of the event (other details + # like the sender are still included). For `event_id_only` push, it + # has no effect. + # + # For modern android devices the notification content will still appear + # because it is loaded by the app. iPhone, however will send a + # notification saying only that a message arrived and who it came from. + # + # The default value is "true" to include message details. Uncomment to only + # include the event ID and room ID in push notification payloads. + # + #include_content: false + + # When a push notification is received, an unread count is also sent. + # This number can either be calculated as the number of unread messages + # for the user, or the number of *rooms* the user has unread messages in. + # + # The default value is "true", meaning push clients will see the number of + # rooms with unread messages in them. Uncomment to instead send the number + # of unread messages. + # + #group_unread_count_by_room: false # Spam checkers are third-party modules that can block specific actions @@ -2399,7 +2485,7 @@ spam_checker: # # Options for the rules include: # -# user_id: Matches agaisnt the creator of the alias +# user_id: Matches against the creator of the alias # room_id: Matches against the room ID being published # alias: Matches against any current local or canonical aliases # associated with the room @@ -2445,7 +2531,7 @@ opentracing: # This is a list of regexes which are matched against the server_name of the # homeserver. # - # By defult, it is empty, so no servers are matched. + # By default, it is empty, so no servers are matched. # #homeserver_whitelist: # - ".*" @@ -2501,6 +2587,11 @@ opentracing: # events: worker1 # typing: worker1 +# The worker that is used to run background tasks (e.g. cleaning up expired +# data). If not provided this defaults to the main process. +# +#run_background_tasks_on: worker1 + # Configuration for Redis when using workers. This *must* be enabled when # using workers (unless using old style direct TCP configuration). |