diff options
Diffstat (limited to 'docker')
| -rw-r--r-- | docker/README.md | 216 | ||||
| -rwxr-xr-x | docker/start.py | 32 |
2 files changed, 94 insertions, 154 deletions
diff --git a/docker/README.md b/docker/README.md index a42d1d24b6..7f7d27ed33 100644 --- a/docker/README.md +++ b/docker/README.md @@ -6,39 +6,11 @@ postgres database. The image also does *not* provide a TURN server. -## Run - -### Using docker-compose (easier) - -This image is designed to run either with an automatically generated -configuration file or with a custom configuration that requires manual editing. - -An easy way to make use of this image is via docker-compose. See the -[contrib/docker](https://github.com/matrix-org/synapse/tree/master/contrib/docker) section of the synapse project for -examples. - -### Without Compose (harder) - -If you do not wish to use Compose, you may still run this image using plain -Docker commands. Note that the following is just a guideline and you may need -to add parameters to the docker run command to account for the network situation -with your postgres database. - -``` -docker run \ - -d \ - --name synapse \ - --mount type=volume,src=synapse-data,dst=/data \ - -e SYNAPSE_SERVER_NAME=my.matrix.host \ - -e SYNAPSE_REPORT_STATS=yes \ - -p 8448:8448 \ - matrixdotorg/synapse:latest -``` - ## Volumes -The image expects a single volume, located at ``/data``, that will hold: +By default, the image expects a single volume, located at ``/data``, that will hold: +* configuration files; * temporary files during uploads; * uploaded media and thumbnails; * the SQLite database if you do not configure postgres; @@ -53,142 +25,90 @@ In order to setup an application service, simply create an ``appservices`` directory in the data volume and write the application service Yaml configuration file there. Multiple application services are supported. -## TLS certificates - -Synapse requires a valid TLS certificate. You can do one of the following: - - * Provide your own certificate and key (as - `${DATA_PATH}/${SYNAPSE_SERVER_NAME}.tls.crt` and - `${DATA_PATH}/${SYNAPSE_SERVER_NAME}.tls.key`, or elsewhere by providing an - entire config as `${SYNAPSE_CONFIG_PATH}`). In this case, you should forward - traffic to port 8448 in the container, for example with `-p 443:8448`. - - * Use a reverse proxy to terminate incoming TLS, and forward the plain http - traffic to port 8008 in the container. In this case you should set `-e - SYNAPSE_NO_TLS=1`. - - * Use the ACME (Let's Encrypt) support built into Synapse. This requires - `${SYNAPSE_SERVER_NAME}` port 80 to be forwarded to port 8009 in the - container, for example with `-p 80:8009`. To enable it in the docker - container, set `-e SYNAPSE_ACME=1`. - -If you don't do any of these, Synapse will fail to start with an error similar to: - - synapse.config._base.ConfigError: Error accessing file '/data/<server_name>.tls.crt' (config for tls_certificate): No such file or directory - -## Environment - -Unless you specify a custom path for the configuration file, a very generic -file will be generated, based on the following environment settings. -These are a good starting point for setting up your own deployment. - -Global settings: - -* ``UID``, the user id Synapse will run as [default 991] -* ``GID``, the group id Synapse will run as [default 991] -* ``SYNAPSE_CONFIG_PATH``, path to a custom config file - -If ``SYNAPSE_CONFIG_PATH`` is set, you should generate a configuration file -then customize it manually: see [Generating a config -file](#generating-a-config-file). - -Otherwise, a dynamic configuration file will be used. - -### Environment variables used to build a dynamic configuration file - -The following environment variables are used to build the configuration file -when ``SYNAPSE_CONFIG_PATH`` is not set. - -* ``SYNAPSE_SERVER_NAME`` (mandatory), the server public hostname. -* ``SYNAPSE_REPORT_STATS``, (mandatory, ``yes`` or ``no``), enable anonymous - statistics reporting back to the Matrix project which helps us to get funding. -* `SYNAPSE_NO_TLS`, (accepts `true`, `false`, `on`, `off`, `1`, `0`, `yes`, `no`]): disable - TLS in Synapse (use this if you run your own TLS-capable reverse proxy). Defaults - to `false` (ie, TLS is enabled by default). -* ``SYNAPSE_ENABLE_REGISTRATION``, set this variable to enable registration on - the Synapse instance. -* ``SYNAPSE_ALLOW_GUEST``, set this variable to allow guest joining this server. -* ``SYNAPSE_EVENT_CACHE_SIZE``, the event cache size [default `10K`]. -* ``SYNAPSE_RECAPTCHA_PUBLIC_KEY``, set this variable to the recaptcha public - key in order to enable recaptcha upon registration. -* ``SYNAPSE_RECAPTCHA_PRIVATE_KEY``, set this variable to the recaptcha private - key in order to enable recaptcha upon registration. -* ``SYNAPSE_TURN_URIS``, set this variable to the coma-separated list of TURN - uris to enable TURN for this homeserver. -* ``SYNAPSE_TURN_SECRET``, set this to the TURN shared secret if required. -* ``SYNAPSE_MAX_UPLOAD_SIZE``, set this variable to change the max upload size - [default `10M`]. -* ``SYNAPSE_ACME``: set this to enable the ACME certificate renewal support. - -Shared secrets, that will be initialized to random values if not set: - -* ``SYNAPSE_REGISTRATION_SHARED_SECRET``, secret for registrering users if - registration is disable. -* ``SYNAPSE_MACAROON_SECRET_KEY`` secret for signing access tokens - to the server. - -Database specific values (will use SQLite if not set): - -* `POSTGRES_DB` - The database name for the synapse postgres - database. [default: `synapse`] -* `POSTGRES_HOST` - The host of the postgres database if you wish to use - postgresql instead of sqlite3. [default: `db` which is useful when using a - container on the same docker network in a compose file where the postgres - service is called `db`] -* `POSTGRES_PASSWORD` - The password for the synapse postgres database. **If - this is set then postgres will be used instead of sqlite3.** [default: none] - **NOTE**: You are highly encouraged to use postgresql! Please use the compose - file to make it easier to deploy. -* `POSTGRES_USER` - The user for the synapse postgres database. [default: - `synapse`] - -Mail server specific values (will not send emails if not set): - -* ``SYNAPSE_SMTP_HOST``, hostname to the mail server. -* ``SYNAPSE_SMTP_PORT``, TCP port for accessing the mail server [default - ``25``]. -* ``SYNAPSE_SMTP_USER``, username for authenticating against the mail server if - any. -* ``SYNAPSE_SMTP_PASSWORD``, password for authenticating against the mail - server if any. - -### Generating a config file - -It is possible to generate a basic configuration file for use with -`SYNAPSE_CONFIG_PATH` using the `generate` commandline option. You will need to -specify values for `SYNAPSE_CONFIG_PATH`, `SYNAPSE_SERVER_NAME` and -`SYNAPSE_REPORT_STATS`, and mount a docker volume to store the data on. For -example: +## Generating a configuration file + +The first step is to genearte a valid config file. To do this, you can run the +image with the `generate` commandline option. + +You will need to specify values for the `SYNAPSE_SERVER_NAME` and +`SYNAPSE_REPORT_STATS` environment variable, and mount a docker volume to store +the configuration on. For example: ``` docker run -it --rm \ --mount type=volume,src=synapse-data,dst=/data \ - -e SYNAPSE_CONFIG_PATH=/data/homeserver.yaml \ -e SYNAPSE_SERVER_NAME=my.matrix.host \ -e SYNAPSE_REPORT_STATS=yes \ matrixdotorg/synapse:latest generate ``` -This will generate a `homeserver.yaml` in (typically) -`/var/lib/docker/volumes/synapse-data/_data`, which you can then customise and -use with: +For information on picking a suitable server name, see +https://github.com/matrix-org/synapse/blob/master/INSTALL.md. -``` -docker run -d --name synapse \ - --mount type=volume,src=synapse-data,dst=/data \ - -e SYNAPSE_CONFIG_PATH=/data/homeserver.yaml \ - matrixdotorg/synapse:latest -``` +The above command will generate a `homeserver.yaml` in (typically) +`/var/lib/docker/volumes/synapse-data/_data`. You should check this file, and +customise it to your needs. -The following environment variables are supported in this mode: +The following environment variables are supported in `generate` mode: * `SYNAPSE_SERVER_NAME` (mandatory): the server public hostname. * `SYNAPSE_REPORT_STATS` (mandatory, `yes` or `no`): whether to enable anonymous statistics reporting. -* `SYNAPSE_CONFIG_PATH` (mandatory): path to the file to be generated. * `SYNAPSE_CONFIG_DIR`: where additional config files (such as the log config and event signing key) will be stored. Defaults to `/data`. +* `SYNAPSE_CONFIG_PATH`: path to the file to be generated. Defaults to + `<SYNAPSE_CONFIG_DIR>/homeserver.yaml`. * `SYNAPSE_DATA_DIR`: where the generated config will put persistent data such as the datatase and media store. Defaults to `/data`. * `UID`, `GID`: the user id and group id to use for creating the data directories. Defaults to `991`, `991`. + + +## Running synapse + +Once you have a valid configuration file, you can start synapse as follows: + +``` +docker run -d --name synapse \ + --mount type=volume,src=synapse-data,dst=/data \ + -p 8008:8008 \ + matrixdotorg/synapse:latest +``` + +You can then check that it has started correctly with: + +``` +docker logs synapse +``` + +If all is well, you should now be able to connect to http://localhost:8008 and +see a confirmation message. + +The following environment variables are supported in run mode: + +* `SYNAPSE_CONFIG_DIR`: where additional config files are stored. Defaults to + `/data`. +* `SYNAPSE_CONFIG_PATH`: path to the config file. Defaults to + `<SYNAPSE_CONFIG_DIR>/homeserver.yaml`. +* `UID`, `GID`: the user and group id to run Synapse as. Defaults to `991`, `991`. + +## TLS support + +The default configuration exposes a single HTTP port: http://localhost:8008. It +is suitable for local testing, but for any practical use, you will either need +to use a reverse proxy, or configure Synapse to expose an HTTPS port. + +For documentation on using a reverse proxy, see +https://github.com/matrix-org/synapse/blob/master/docs/reverse_proxy.rst. + +For more information on enabling TLS support in synapse itself, see +https://github.com/matrix-org/synapse/blob/master/INSTALL.md#tls-certificates. Of +course, you will need to expose the TLS port from the container with a `-p` +argument to `docker run`. + +## Legacy dynamic configuration file support + +For backwards-compatibility only, the docker image supports creating a dynamic +configuration file based on environment variables. This is now deprecated, but +is enabled when the `SYNAPSE_SERVER_NAME` variable is set (and `generate` is +not given). diff --git a/docker/start.py b/docker/start.py index fdc3d59d86..89ec9ebaf8 100755 --- a/docker/start.py +++ b/docker/start.py @@ -131,12 +131,13 @@ def run_generate_config(environ, ownership): Never returns. """ - for v in ("SYNAPSE_SERVER_NAME", "SYNAPSE_REPORT_STATS", "SYNAPSE_CONFIG_PATH"): + for v in ("SYNAPSE_SERVER_NAME", "SYNAPSE_REPORT_STATS"): if v not in environ: error("Environment variable '%s' is mandatory in `generate` mode." % (v,)) server_name = environ["SYNAPSE_SERVER_NAME"] config_dir = environ.get("SYNAPSE_CONFIG_DIR", "/data") + config_path = environ.get("SYNAPSE_CONFIG_PATH", config_dir + "/homeserver.yaml") data_dir = environ.get("SYNAPSE_DATA_DIR", "/data") # create a suitable log config from our template @@ -157,7 +158,7 @@ def run_generate_config(environ, ownership): "--report-stats", environ["SYNAPSE_REPORT_STATS"], "--config-path", - environ["SYNAPSE_CONFIG_PATH"], + config_path, "--config-directory", config_dir, "--data-directory", @@ -176,11 +177,30 @@ def main(args, environ): if mode == "generate": return run_generate_config(environ, ownership) - # In normal mode, generate missing keys if any, then run synapse - if "SYNAPSE_CONFIG_PATH" in environ: - config_path = environ["SYNAPSE_CONFIG_PATH"] - else: + if "SYNAPSE_SERVER_NAME" in environ: + # backwards-compatibility generate-a-config-on-the-fly mode + if "SYNAPSE_CONFIG_PATH" in environ: + error( + "SYNAPSE_SERVER_NAME and SYNAPSE_CONFIG_PATH are mutually exclusive " + "except in `generate` mode." + ) + config_path = generate_config_from_template(environ, ownership) + else: + config_dir = environ.get("SYNAPSE_CONFIG_DIR", "/data") + config_path = environ.get( + "SYNAPSE_CONFIG_PATH", config_dir + "/homeserver.yaml" + ) + if not os.path.exists(config_path): + error( + "Config file '%s' does not exist. You should either create a new " + "config file by running with the `generate` argument (and then edit " + "the resulting file before restarting) or specify the path to an " + "existing config file with the SYNAPSE_CONFIG_PATH variable." + % (config_path,) + ) + + log("Starting synapse with config file " + config_path) args = [ "su-exec", |