diff options
Diffstat (limited to 'contrib')
5 files changed, 204 insertions, 0 deletions
diff --git a/contrib/systemd-with-workers/README.md b/contrib/systemd-with-workers/README.md new file mode 100644 index 0000000000..74b261e9fb --- /dev/null +++ b/contrib/systemd-with-workers/README.md @@ -0,0 +1,150 @@ +# Setup Synapse with Workers and Systemd + +This is a setup for managing synapse with systemd including support for +managing workers. It provides a `matrix-synapse`, as well as a +`matrix-synapse-worker@` service for any workers you require. Additionally to +group the required services it sets up a `matrix.target`. You can use this to +automatically start any bot- or bridge-services. More on this in +[Bots and Bridges](#bots-and-bridges). + +See the folder [system](system) for any service and target files. + +The folder [workers](workers) contains an example configuration for the +`federation_reader` worker. Pay special attention to the name of the +configuration file. In order to work with the `matrix-synapse-worker@.service` +service, it needs to have the exact same name as the worker app. + +This setup expects neither the homeserver nor any workers to fork. Forking is +handled by systemd. + +## Setup + +1. Adjust your matrix configs. Make sure that the worker config files have the +exact same name as the worker app. Compare `matrix-synapse-worker@.service` for +why. You can find an example worker config in the [workers](workers) folder. See +below for relevant settings in the `homeserver.yaml`. +2. Copy the `*.service` and `*.target` files in [system](system) to +`/etc/systemd/system`. +3. `systemctl enable matrix-synapse.service` this adds the homeserver +app to the `matrix.target` +4. *Optional.* `systemctl enable +matrix-synapse-worker@federation_reader.service` this adds the federation_reader +app to the `matrix-synapse.service` +5. *Optional.* Repeat step 4 for any additional workers you require. +6. *Optional.* Add any bots or bridges by enabling them. +7. Start all matrix related services via `systemctl start matrix.target` +8. *Optional.* Enable autostart of all matrix related services on system boot +via `systemctl enable matrix.target` + +## Usage + +After you have setup you can use the following commands to manage your synapse +installation: + +``` +# Start matrix-synapse, all workers and any enabled bots or bridges. +systemctl start matrix.target + +# Restart matrix-synapse and all workers (not necessarily restarting bots +# or bridges, see "Bots and Bridges") +systemctl restart matrix-synapse.service + +# Stop matrix-synapse and all workers (not necessarily restarting bots +# or bridges, see "Bots and Bridges") +systemctl stop matrix-synapse.service + +# Restart a specific worker (i. e. federation_reader), the homeserver is +# unaffected by this. +systemctl restart matrix-synapse-worker@federation_reader.service + +# Add a new worker (assuming all configs are setup already) +systemctl enable matrix-synapse-worker@federation_writer.service +systemctl restart matrix-synapse.service +``` + +## The Configs + +Make sure the `worker_app` is set in the `homeserver.yaml` and it does not fork. + +``` +worker_app: synapse.app.homeserver +daemonize: false +``` + +None of the workers should fork, as forking is handled by systemd. Hence make +sure this is present in all worker config files. + +``` +worker_daemonize: false +``` + +The config files of all workers are expected to be located in +`/etc/matrix-synapse/workers`. If you want to use a different location you have +to edit the provided `*.service` files accordingly. + +## Bots and Bridges + +Most bots and bridges do not care if the homeserver goes down or is restarted. +Depending on the implementation this may crash them though. So look up the docs +or ask the community of the specific bridge or bot you want to run to make sure +you choose the correct setup. + +Whichever configuration you choose, after the setup the following will enable +automatically starting (and potentially restarting) your bot/bridge with the +`matrix.target`. + +``` +systemctl enable <yourBotOrBridgeName>.service +``` + +**Note** that from an inactive synapse the bots/bridges will only be started with +synapse if you start the `matrix.target`, not if you start the +`matrix-synapse.service`. This is on purpose. Think of `matrix-synapse.service` +as *just* synapse, but `matrix.target` being anything matrix related, including +synapse and any and all enabled bots and bridges. + +### Start with synapse but ignore synapse going down + +If the bridge can handle shutdowns of the homeserver you'll want to install the +service in the `matrix.target` and optionally add a +`After=matrix-synapse.service` dependency to have the bot/bridge start after +synapse on starting everything. + +In this case the service file should look like this. + +``` +[Unit] +# ... +# Optional, this will only ensure that if you start everything, synapse will +# be started before the bot/bridge will be started. +After=matrix-synapse.service + +[Service] +# ... + +[Install] +WantedBy=matrix.target +``` + +### Stop/restart when synapse stops/restarts + +If the bridge can't handle shutdowns of the homeserver you'll still want to +install the service in the `matrix.target` but also have to specify the +`After=matrix-synapse.service` *and* `BindsTo=matrix-synapse.service` +dependencies to have the bot/bridge stop/restart with synapse. + +In this case the service file should look like this. + +``` +[Unit] +# ... +# Mandatory +After=matrix-synapse.service +BindsTo=matrix-synapse.service + +[Service] +# ... + +[Install] +WantedBy=matrix.target +``` diff --git a/contrib/systemd-with-workers/system/matrix-synapse-worker@.service b/contrib/systemd-with-workers/system/matrix-synapse-worker@.service new file mode 100644 index 0000000000..912984b9d2 --- /dev/null +++ b/contrib/systemd-with-workers/system/matrix-synapse-worker@.service @@ -0,0 +1,17 @@ +[Unit] +Description=Synapse Matrix Worker +After=matrix-synapse.service +BindsTo=matrix-synapse.service + +[Service] +Type=simple +User=matrix-synapse +WorkingDirectory=/var/lib/matrix-synapse +EnvironmentFile=/etc/default/matrix-synapse +ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.%i --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --config-path=/etc/matrix-synapse/workers/%i.yaml +ExecReload=/bin/kill -HUP $MAINPID +Restart=always +RestartSec=3 + +[Install] +WantedBy=matrix-synapse.service diff --git a/contrib/systemd-with-workers/system/matrix-synapse.service b/contrib/systemd-with-workers/system/matrix-synapse.service new file mode 100644 index 0000000000..8bb4e400dc --- /dev/null +++ b/contrib/systemd-with-workers/system/matrix-synapse.service @@ -0,0 +1,16 @@ +[Unit] +Description=Synapse Matrix Homeserver + +[Service] +Type=simple +User=matrix-synapse +WorkingDirectory=/var/lib/matrix-synapse +EnvironmentFile=/etc/default/matrix-synapse +ExecStartPre=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --generate-keys +ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ +ExecReload=/bin/kill -HUP $MAINPID +Restart=always +RestartSec=3 + +[Install] +WantedBy=matrix.target diff --git a/contrib/systemd-with-workers/system/matrix.target b/contrib/systemd-with-workers/system/matrix.target new file mode 100644 index 0000000000..aff97d03ef --- /dev/null +++ b/contrib/systemd-with-workers/system/matrix.target @@ -0,0 +1,7 @@ +[Unit] +Description=Contains matrix services like synapse, bridges and bots +After=network.target +AllowIsolate=no + +[Install] +WantedBy=multi-user.target diff --git a/contrib/systemd-with-workers/workers/federation_reader.yaml b/contrib/systemd-with-workers/workers/federation_reader.yaml new file mode 100644 index 0000000000..47c54ec0d4 --- /dev/null +++ b/contrib/systemd-with-workers/workers/federation_reader.yaml @@ -0,0 +1,14 @@ +worker_app: synapse.app.federation_reader + +worker_replication_host: 127.0.0.1 +worker_replication_port: 9092 +worker_replication_http_port: 9093 + +worker_listeners: + - type: http + port: 8011 + resources: + - names: [federation] + +worker_daemonize: false +worker_log_config: /etc/matrix-synapse/federation-reader-log.yaml |