diff options
Diffstat (limited to 'contrib/docker')
| -rw-r--r-- | contrib/docker/README.md | 70 | ||||
| -rw-r--r-- | contrib/docker/rob/docker-compose.yaml | 39 | ||||
| -rwxr-xr-x | contrib/docker/rob/rootfs/etc/service/synapse/finish | 17 | ||||
| -rwxr-xr-x | contrib/docker/rob/rootfs/etc/service/synapse/run | 75 |
4 files changed, 201 insertions, 0 deletions
diff --git a/contrib/docker/README.md b/contrib/docker/README.md new file mode 100644 index 0000000000..c15517d0e0 --- /dev/null +++ b/contrib/docker/README.md @@ -0,0 +1,70 @@ +# Synapse Docker + +## Build + +Build the docker image with the `docker build` command from the root of the synapse repository. + +``` +docker build -t matrixdotorg/synapse:v0.22.1 . +``` + +The `-t` option sets the image tag. Official images are tagged `matrixdotorg/synapse:<version>` where `<version>` is the same as the release tag in the synapse git repository. + +## Configure + +Synapse provides a command for generating homeserver configuration files. These are a good starting point for setting up your own deployment. + +The documentation below will refer to a `CONFIG_PATH` shell variable. This is a path to a directory where synapse configuration will be stored. It needs to be mapped into the container as a volume at `/synapse/config/` as can be seen in the example `docker run` command. + +Docker container environment variables: +* `GENERATE_CONFIG` - Set this to any non-empty string, such as `yes`, to trigger generation of configuration files. Existing files in the `CONFIG_PATH` will **not** be overwritten. +* `POSTGRES_DATABASE` - The database name for the synapse postgres database. [default: `synapse`] +* `POSTGRES_HOST` - The host of the postgres database if you wish to use postgresql instead of sqlite3. [default: `postgres` which is useful when using a container on the same docker network in a compose file where the postgres service is called `postgres`] **NOTE**: `localhost` and `127.0.0.1` refer to the container itself unless running the container with `host` networking. +* `POSTGRES_PASSWORD` - The password for the synapse postgres database. **If this is set then postgres will be used instead of sqlite3.** [default: none] **NOTE**: You are highly encouraged to use postgresql! Please use the compose file to make it easier to deploy. +* `POSTGRES_USER` - The user for the synapse postgres database. [default: `postgres`] +* `REPORT_STATS` - Whether to send anonymous usage statistics back to the Matrix project which helps us to get funding! Must be `yes` or `no`. [default: `yes`] +* `SERVER_NAME` - The domain used for the Matrix homeserver. If you intend to run this synapse instance on a public domain, use that domain. [default: `localhost`] + +``` +CONFIG_PATH=/my/magical/config/path/ +mkdir -p ${CONFIG_PATH} +docker run \ + --rm \ + -e GENERATE_CONFIG=yes \ + -e POSTGRES_PASSWORD=MyVerySecretPassword \ + -e REPORT_STATS=yes \ + -e SERVER_NAME=example.com \ + -v ${CONFIG_PATH}:/synapse/config/ \ + matrixdotorg/synapse:v0.22.1 +``` + +This will create a temporary container from the image and use the synapse code for generating configuration files and TLS keys and certificates for the specified `SERVER_NAME` domain. The files are written to `CONFIG_PATH`. + +## Run + +**NOTE**: If you are not using postgresql and are using sqlite3 as your database, you will need to make a directory to store the sqlite3 database file in and then mount this volume into the container at `/synapse/data/`. As it is so easy to use postgresql, when using Docker containers, this is not documented to somewhat discourage it. Choose a `POSTGRES_PASSWORD` instead. + +### Docker Compose + +A `docker-compose.yaml` file is included to ease deployment of the basic synapse and postgres setup. Remember to set a `POSTGRES_PASSWORD` when generating your configuration above. You will need it for running the containers in the composition. + +From the `docker/` subdirectory of the synapse repository: +``` +CONFIG_PATH=/my/magical/config/path/ +POSTGRES_PASSWORD=MyVerySecretPassword \ +docker-compose \ + -p synapse \ + up -d +``` + +### Docker + +Note that the following is just a guideline and you may need to add parameters to the docker run command to account for the network situation with your postgres database. + +``` +docker run \ + -d \ + --name synapse \ + -v ${CONFIG_PATH}:/synapse/config/ \ + matrixdotorg/synapse:v0.22.1 +``` diff --git a/contrib/docker/rob/docker-compose.yaml b/contrib/docker/rob/docker-compose.yaml new file mode 100644 index 0000000000..73cc29f8fd --- /dev/null +++ b/contrib/docker/rob/docker-compose.yaml @@ -0,0 +1,39 @@ +# Copyright 2017 Vector Creations Ltd +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +version: '3' + +services: + postgres: + image: postgres:9.6.5-alpine + environment: + POSTGRES_PASSWORD: ${POSTGRES_PASSWORD} + POSTGRES_DB: synapse + expose: + - 5432 + restart: unless-stopped + volumes: + - postgres-data:/var/lib/postgresql/data/ + + synapse: + image: matrixdotorg/synapse:v0.22.1 + ports: + - 8008:8008 + - 8448:8448 + restart: unless-stopped + volumes: + - ${CONFIG_PATH}:/synapse/config/ + +volumes: + postgres-data: diff --git a/contrib/docker/rob/rootfs/etc/service/synapse/finish b/contrib/docker/rob/rootfs/etc/service/synapse/finish new file mode 100755 index 0000000000..2aace581a1 --- /dev/null +++ b/contrib/docker/rob/rootfs/etc/service/synapse/finish @@ -0,0 +1,17 @@ +#!/bin/bash +# +# Copyright 2017 Vector Creations Ltd +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +kill -TERM 1 diff --git a/contrib/docker/rob/rootfs/etc/service/synapse/run b/contrib/docker/rob/rootfs/etc/service/synapse/run new file mode 100755 index 0000000000..dd797d3ef9 --- /dev/null +++ b/contrib/docker/rob/rootfs/etc/service/synapse/run @@ -0,0 +1,75 @@ +#!/bin/bash +# +# Copyright 2017 Vector Creations Ltd +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +set -e + +: ${CONFIG_PATH:="/synapse/config"} +: ${POSTGRES_DATABASE:="synapse"} +: ${POSTGRES_HOST:="postgres"} +: ${POSTGRES_USER:="postgres"} +: ${REPORT_STATS:="yes"} +: ${SERVER_NAME:="localhost"} + +DATABASE_CONFIG_PATH="${CONFIG_PATH}/database.yaml" +HOMESERVER_CONFIG_PATH="${CONFIG_PATH}/homeserver.yaml" +SYNAPSE_COMMAND="python -m synapse.app.homeserver" + +. /synapse/bin/activate +cd /synapse + +if [[ -n "${GENERATE_CONFIG}" ]]; then + ${SYNAPSE_COMMAND} \ + --server-name ${SERVER_NAME} \ + --config-path ${HOMESERVER_CONFIG_PATH} \ + --generate-config \ + --report-stats=${REPORT_STATS} + + if [[ -f "${DATABASE_CONFIG_PATH}" ]]; then + echo "Config file '${DATABASE_CONFIG_PATH}' already exists. Remove it if you want it to be generated." + else + echo "Generating ${DATABASE_CONFIG_PATH}..." + if [[ -n "${POSTGRES_PASSWORD}" ]]; then + (cat > ${DATABASE_CONFIG_PATH}) <<EOF +database: + name: psycopg2 + args: + host: ${POSTGRES_HOST} + user: ${POSTGRES_USER} + password: ${POSTGRES_PASSWORD} + database: ${POSTGRES_DATABASE} + cp_min: 5 + cp_max: 10 +EOF + else + (cat > ${DATABASE_CONFIG_PATH}) <<EOF +database: + name: "sqlite3" + args: + database: "/synapse/data/homeserver.db" +EOF + fi + cat ${DATABASE_CONFIG_PATH} | grep -v password + fi + + exit 0 +fi + +COMMAND="${SYNAPSE_COMMAND} --config-path ${HOMESERVER_CONFIG_PATH}" +if [[ -r "${DATABASE_CONFIG_PATH}" ]]; then + COMMAND="${COMMAND} --config-path ${DATABASE_CONFIG_PATH}" +fi + +exec ${COMMAND} |