diff options
Diffstat (limited to '')
| -rw-r--r-- | changelog.d/8779.doc | 1 | ||||
| -rw-r--r-- | docs/turn-howto.md | 131 |
2 files changed, 124 insertions, 8 deletions
diff --git a/changelog.d/8779.doc b/changelog.d/8779.doc new file mode 100644 index 0000000000..3641ae7f91 --- /dev/null +++ b/changelog.d/8779.doc @@ -0,0 +1 @@ +Update `turn-howto.md` with troubleshooting notes. diff --git a/docs/turn-howto.md b/docs/turn-howto.md index d4a726be66..a470c274a5 100644 --- a/docs/turn-howto.md +++ b/docs/turn-howto.md @@ -42,10 +42,10 @@ This will install and start a systemd service called `coturn`. ./configure - > You may need to install `libevent2`: if so, you should do so in - > the way recommended by your operating system. You can ignore - > warnings about lack of database support: a database is unnecessary - > for this purpose. + You may need to install `libevent2`: if so, you should do so in + the way recommended by your operating system. You can ignore + warnings about lack of database support: a database is unnecessary + for this purpose. 1. Build and install it: @@ -66,6 +66,19 @@ This will install and start a systemd service called `coturn`. pwgen -s 64 1 + A `realm` must be specified, but its value is somewhat arbitrary. (It is + sent to clients as part of the authentication flow.) It is conventional to + set it to be your server name. + +1. You will most likely want to configure coturn to write logs somewhere. The + easiest way is normally to send them to the syslog: + + syslog + + (in which case, the logs will be available via `journalctl -u coturn` on a + systemd system). Alternatively, coturn can be configured to write to a + logfile - check the example config file supplied with coturn. + 1. Consider your security settings. TURN lets users request a relay which will connect to arbitrary IP addresses and ports. The following configuration is suggested as a minimum starting point: @@ -96,11 +109,31 @@ This will install and start a systemd service called `coturn`. # TLS private key file pkey=/path/to/privkey.pem + In this case, replace the `turn:` schemes in the `turn_uri` settings below + with `turns:`. + + We recommend that you only try to set up TLS/DTLS once you have set up a + basic installation and got it working. + 1. Ensure your firewall allows traffic into the TURN server on the ports - you've configured it to listen on (By default: 3478 and 5349 for the TURN(s) + you've configured it to listen on (By default: 3478 and 5349 for TURN traffic (remember to allow both TCP and UDP traffic), and ports 49152-65535 for the UDP relay.) +1. We do not recommend running a TURN server behind NAT, and are not aware of + anyone doing so successfully. + + If you want to try it anyway, you will at least need to tell coturn its + external IP address: + + external-ip=192.88.99.1 + + ... and your NAT gateway must forward all of the relayed ports directly + (eg, port 56789 on the external IP must be always be forwarded to port + 56789 on the internal IP). + + If you get this working, let us know! + 1. (Re)start the turn server: * If you used the Debian package (or have set up a systemd unit yourself): @@ -137,9 +170,10 @@ Your home server configuration file needs the following extra keys: without having gone through a CAPTCHA or similar to register a real account. -As an example, here is the relevant section of the config file for matrix.org: +As an example, here is the relevant section of the config file for `matrix.org`. The +`turn_uris` are appropriate for TURN servers listening on the default ports, with no TLS. - turn_uris: [ "turn:turn.matrix.org:3478?transport=udp", "turn:turn.matrix.org:3478?transport=tcp" ] + turn_uris: [ "turn:turn.matrix.org?transport=udp", "turn:turn.matrix.org?transport=tcp" ] turn_shared_secret: "n0t4ctuAllymatr1Xd0TorgSshar3d5ecret4obvIousreAsons" turn_user_lifetime: 86400000 turn_allow_guests: True @@ -155,5 +189,86 @@ After updating the homeserver configuration, you must restart synapse: ``` systemctl restart synapse.service ``` +... and then reload any clients (or wait an hour for them to refresh their +settings). + +## Troubleshooting + +The normal symptoms of a misconfigured TURN server are that calls between +devices on different networks ring, but get stuck at "call +connecting". Unfortunately, troubleshooting this can be tricky. + +Here are a few things to try: + + * Check that your TURN server is not behind NAT. As above, we're not aware of + anyone who has successfully set this up. + + * Check that you have opened your firewall to allow TCP and UDP traffic to the + TURN ports (normally 3478 and 5479). + + * Check that you have opened your firewall to allow UDP traffic to the UDP + relay ports (49152-65535 by default). + + * Some WebRTC implementations (notably, that of Google Chrome) appear to get + confused by TURN servers which are reachable over IPv6 (this appears to be + an unexpected side-effect of its handling of multiple IP addresses as + defined by + [`draft-ietf-rtcweb-ip-handling`](https://tools.ietf.org/html/draft-ietf-rtcweb-ip-handling-12)). + + Try removing any AAAA records for your TURN server, so that it is only + reachable over IPv4. + + * Enable more verbose logging in coturn via the `verbose` setting: + + ``` + verbose + ``` + + ... and then see if there are any clues in its logs. + + * If you are using a browser-based client under Chrome, check + `chrome://webrtc-internals/` for insights into the internals of the + negotiation. On Firefox, check the "Connection Log" on `about:webrtc`. + + (Understanding the output is beyond the scope of this document!) + + * There is a WebRTC test tool at + https://webrtc.github.io/samples/src/content/peerconnection/trickle-ice/. To + use it, you will need a username/password for your TURN server. You can + either: + + * look for the `GET /_matrix/client/r0/voip/turnServer` request made by a + matrix client to your homeserver in your browser's network inspector. In + the response you should see `username` and `password`. Or: + + * Use the following shell commands: + + ```sh + secret=staticAuthSecretHere + + u=$((`date +%s` + 3600)):test + p=$(echo -n $u | openssl dgst -hmac $secret -sha1 -binary | base64) + echo -e "username: $u\npassword: $p" + ``` + + Or: + + * Temporarily configure coturn to accept a static username/password. To do + this, comment out `use-auth-secret` and `static-auth-secret` and add the + following: + + ``` + lt-cred-mech + user=username:password + ``` + + **Note**: these settings will not take effect unless `use-auth-secret` + and `static-auth-secret` are disabled. + + Restart coturn after changing the configuration file. + + Remember to restore the original settings to go back to testing with + Matrix clients! -..and your Home Server now supports VoIP relaying! + If the TURN server is working correctly, you should see at least one `relay` + entry in the results. |