diff options
Diffstat (limited to '')
| -rw-r--r-- | README.rst | 69 | ||||
| -rw-r--r-- | UPGRADE.rst | 33 | ||||
| -rw-r--r-- | docs/ACME.rst | 98 |
3 files changed, 102 insertions, 98 deletions
diff --git a/README.rst b/README.rst index 9e3d85de4c..829de0864c 100644 --- a/README.rst +++ b/README.rst @@ -225,75 +225,6 @@ If you would like to use your own certificates, you can do so by changing alternatively, you can use a reverse-proxy. Apart from port 8448 using TLS, both ports are the same in the default configuration. - -ACME setup ----------- - -Synapse v1.0 will require valid TLS certificates for communication between servers -(port ``8448`` by default) in addition to those that are client-facing (port -``443``). In the case that your `server_name` config variable is the same as -the hostname that the client connects to, then the same certificate can be -used between client and federation ports without issue. Synapse v0.99.0+ -**will provision server-to-server certificates automatically for you for -free** through `Let's Encrypt -<https://letsencrypt.org/>`_ if you tell it to. - -In order for Synapse to complete the ACME challenge to provision a -certificate, it needs access to port 80. Typically listening on port 80 is -only granted to applications running as root. There are thus two solutions to -this problem. - -**Using a reverse proxy** - -A reverse proxy such as Apache or nginx allows a single process (the web -server) to listen on port 80 and proxy traffic to the appropriate program -running on your server. It is the recommended method for setting up ACME as -it allows you to use your existing webserver while also allowing Synapse to -provision certificates as needed. - -For nginx users, add the following line to your existing ``server`` block:: - - location /.well-known/acme-challenge { - proxy_pass http://localhost:8009/; - } - -For Apache, add the following to your existing webserver config:: - - ProxyPass /.well-known/acme-challenge http://localhost:8009/.well-known/acme-challenge - -Make sure to restart/reload your webserver after making changes. - - -**Authbind** - -``authbind`` allows a program which does not run as root to bind to -low-numbered ports in a controlled way. The setup is simpler, but requires a -webserver not to already be running on port 80. **This includes every time -Synapse renews a certificate**, which may be cumbersome if you usually run a -web server on port 80. Nevertheless, if you're sure port 80 is not being used -for any other purpose then all that is necessary is the following: - -Install ``authbind``. For example, on Debian/Ubuntu:: - - sudo apt-get install authbind - -Allow ``authbind`` to bind port 80:: - - sudo touch /etc/authbind/byport/80 - sudo chmod 777 /etc/authbind/byport/80 - -When Synapse is started, use the following syntax:: - - authbind --deep <synapse start command> - -Finally, once Synapse's is able to listen on port 80 for ACME challenge -requests, it must be told to perform ACME provisioning by setting ``enabled`` -to true under the ``acme`` section in ``homeserver.yaml``:: - - acme: - enabled: true - - Registering a user ------------------ diff --git a/UPGRADE.rst b/UPGRADE.rst index f6cdec4734..74d2452749 100644 --- a/UPGRADE.rst +++ b/UPGRADE.rst @@ -51,35 +51,10 @@ returned by the Client-Server API: Upgrading to v0.99.0 ==================== -In preparation for Synapse v1.0, you must ensure your federation TLS -certificates are verifiable by signed by a trusted root CA. - -If you do not already have a valid certificate for your domain, the easiest -way to get one is with Synapse's new ACME support, which will use the ACME -protocol to provision a certificate automatically. By default, certificates -will be obtained from the publicly trusted CA Let's Encrypt. - -For a sample configuration, please inspect the new ACME section in the example -generated config by running the ``generate-config`` executable. For example:: - - ~/synapse/env3/bin/generate-config - -You will need to provide Let's Encrypt (or another ACME provider) access to -your Synapse ACME challenge responder on port 80, at the domain of your -homeserver. This requires you to either change the port of the ACME listener -provided by Synapse to a high port and reverse proxy to it, or use a tool -like ``authbind`` to allow Synapse to listen on port 80 without root access. -(Do not run Synapse with root permissions!) - -If you are already using self-signed ceritifcates, you will need to back up -or delete them (files ``example.com.tls.crt`` and ``example.com.tls.key`` in -Synapse's root directory), Synapse's ACME implementation will not overwrite -them. - -You may wish to use alternate methods such as Certbot to obtain a certificate -from Let's Encrypt, depending on your server configuration. Of course, if you -already have a valid certificate for your homeserver's domain, that can be -placed in Synapse's config directory without the need for any ACME setup. +No special steps are required, but please be aware that you will need to +replace any self-signed certificates with those verified by a root CA before +Synapse v1.0 releases in roughly a month's time after v0.99.0. Information on +how to do so can be found at `the ACME docs <docs/ACME.rst>`_. Upgrading to v0.34.0 ==================== diff --git a/docs/ACME.rst b/docs/ACME.rst new file mode 100644 index 0000000000..2562e85dbc --- /dev/null +++ b/docs/ACME.rst @@ -0,0 +1,98 @@ +ACME +==== + +Synapse v1.0 requires that federation TLS certificates are verifiable by a +trusted root CA. If you do not already have a valid certificate for your domain, the easiest +way to get one is with Synapse's new ACME support, which will use the ACME +protocol to provision a certificate automatically. By default, certificates +will be obtained from the publicly trusted CA Let's Encrypt. + +For a sample configuration, please inspect the new ACME section in the example +generated config by running the ``generate-config`` executable. For example:: + + ~/synapse/env3/bin/generate-config + +You will need to provide Let's Encrypt (or another ACME provider) access to +your Synapse ACME challenge responder on port 80, at the domain of your +homeserver. This requires you to either change the port of the ACME listener +provided by Synapse to a high port and reverse proxy to it, or use a tool +like ``authbind`` to allow Synapse to listen on port 80 without root access. +(Do not run Synapse with root permissions!) Detailed instructions are +available under "ACME setup" below. + +If you are already using self-signed certificates, you will need to back up +or delete them (files ``example.com.tls.crt`` and ``example.com.tls.key`` in +Synapse's root directory), Synapse's ACME implementation will not overwrite +them. + +You may wish to use alternate methods such as Certbot to obtain a certificate +from Let's Encrypt, depending on your server configuration. Of course, if you +already have a valid certificate for your homeserver's domain, that can be +placed in Synapse's config directory without the need for any ACME setup. + +ACME setup +---------- + +Synapse v1.0 will require valid TLS certificates for communication between servers +(port ``8448`` by default) in addition to those that are client-facing (port +``443``). In the case that your `server_name` config variable is the same as +the hostname that the client connects to, then the same certificate can be +used between client and federation ports without issue. Synapse v0.99.0+ +will provision server-to-server certificates automatically for you for +free through `Let's Encrypt +<https://letsencrypt.org/>`_ if you tell it to. + +In order for Synapse to complete the ACME challenge to provision a +certificate, it needs access to port 80. Typically listening on port 80 is +only granted to applications running as root. There are thus two solutions to +this problem. + +**Using a reverse proxy** + +A reverse proxy such as Apache or nginx allows a single process (the web +server) to listen on port 80 and proxy traffic to the appropriate program +running on your server. It is the recommended method for setting up ACME as +it allows you to use your existing webserver while also allowing Synapse to +provision certificates as needed. + +For nginx users, add the following line to your existing ``server`` block:: + + location /.well-known/acme-challenge { + proxy_pass http://localhost:8009/; + } + +For Apache, add the following to your existing webserver config:: + + ProxyPass /.well-known/acme-challenge http://localhost:8009/.well-known/acme-challenge + +Make sure to restart/reload your webserver after making changes. + + +**Authbind** + +``authbind`` allows a program which does not run as root to bind to +low-numbered ports in a controlled way. The setup is simpler, but requires a +webserver not to already be running on port 80. **This includes every time +Synapse renews a certificate**, which may be cumbersome if you usually run a +web server on port 80. Nevertheless, if you're sure port 80 is not being used +for any other purpose then all that is necessary is the following: + +Install ``authbind``. For example, on Debian/Ubuntu:: + + sudo apt-get install authbind + +Allow ``authbind`` to bind port 80:: + + sudo touch /etc/authbind/byport/80 + sudo chmod 777 /etc/authbind/byport/80 + +When Synapse is started, use the following syntax:: + + authbind --deep <synapse start command> + +Finally, once Synapse's is able to listen on port 80 for ACME challenge +requests, it must be told to perform ACME provisioning by setting ``enabled`` +to true under the ``acme`` section in ``homeserver.yaml``:: + + acme: + enabled: true |