Introduction

Welcome to the documentation repository for Synapse, the reference Matrix homeserver implementation.

Installation Instructions

There are 3 steps to follow under Installation Instructions.

Choosing your server name

It is important to choose the name for your server before you install Synapse, because it cannot be changed later.

The server name determines the "domain" part of user-ids for users on your server: these will all be of the format @user:my.domain.name. It also determines how other matrix servers will reach yours for federation.

For a test configuration, set this to the hostname of your server. For a more production-ready setup, you will probably want to specify your domain (example.com) rather than a matrix-specific hostname here (in the same way that your email address is probably user@example.com rather than user@email.example.com) - but doing so may require more advanced setup: see Setting up Federation.

Installing Synapse

Installing from source

(Prebuilt packages are available for some platforms - see Prebuilt packages.)

When installing from source please make sure that the Platform-specific prerequisites are already installed.

System requirements:

  • POSIX-compliant system (tested on Linux & OS X)
  • Python 3.5.2 or later, up to Python 3.9.
  • At least 1GB of free RAM if you want to join large public rooms like #matrix:matrix.org

To install the Synapse homeserver run:

mkdir -p ~/synapse
virtualenv -p python3 ~/synapse/env
source ~/synapse/env/bin/activate
pip install --upgrade pip
pip install --upgrade setuptools
pip install matrix-synapse

This will download Synapse from PyPI and install it, along with the python libraries it uses, into a virtual environment under ~/synapse/env. Feel free to pick a different directory if you prefer.

This Synapse installation can then be later upgraded by using pip again with the update flag:

source ~/synapse/env/bin/activate
pip install -U matrix-synapse

Before you can start Synapse, you will need to generate a configuration file. To do this, run (in your virtualenv, as before):

cd ~/synapse
python -m synapse.app.homeserver \
    --server-name my.domain.name \
    --config-path homeserver.yaml \
    --generate-config \
    --report-stats=[yes|no]

... substituting an appropriate value for --server-name.

This command will generate you a config file that you can then customise, but it will also generate a set of keys for you. These keys will allow your homeserver to identify itself to other homeserver, so don't lose or delete them. It would be wise to back them up somewhere safe. (If, for whatever reason, you do need to change your homeserver's keys, you may find that other homeserver have the old key cached. If you update the signing key, you should change the name of the key in the <server name>.signing.key file (the second word) to something different. See the spec for more information on key management).

To actually run your new homeserver, pick a working directory for Synapse to run (e.g. ~/synapse), and:

cd ~/synapse
source env/bin/activate
synctl start

Platform-specific prerequisites

Synapse is written in Python but some of the libraries it uses are written in C. So before we can install Synapse itself we need a working C compiler and the header files for Python C extensions.

Debian/Ubuntu/Raspbian

Installing prerequisites on Ubuntu or Debian:

sudo apt install build-essential python3-dev libffi-dev \
                     python3-pip python3-setuptools sqlite3 \
                     libssl-dev virtualenv libjpeg-dev libxslt1-dev
ArchLinux

Installing prerequisites on ArchLinux:

sudo pacman -S base-devel python python-pip \
               python-setuptools python-virtualenv sqlite3
CentOS/Fedora

Installing prerequisites on CentOS or Fedora Linux:

sudo dnf install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
                 libwebp-devel libxml2-devel libxslt-devel libpq-devel \
                 python3-virtualenv libffi-devel openssl-devel python3-devel
sudo dnf groupinstall "Development Tools"
macOS

Installing prerequisites on macOS:

xcode-select --install
sudo easy_install pip
sudo pip install virtualenv
brew install pkg-config libffi

On macOS Catalina (10.15) you may need to explicitly install OpenSSL via brew and inform pip about it so that psycopg2 builds:

brew install openssl@1.1
export LDFLAGS="-L/usr/local/opt/openssl/lib"
export CPPFLAGS="-I/usr/local/opt/openssl/include"
OpenSUSE

Installing prerequisites on openSUSE:

sudo zypper in -t pattern devel_basis
sudo zypper in python-pip python-setuptools sqlite3 python-virtualenv \
               python-devel libffi-devel libopenssl-devel libjpeg62-devel
OpenBSD

A port of Synapse is available under net/synapse. The filesystem underlying the homeserver directory (defaults to /var/synapse) has to be mounted with wxallowed (cf. mount(8)), so creating a separate filesystem and mounting it to /var/synapse should be taken into consideration.

To be able to build Synapse's dependency on python the WRKOBJDIR (cf. bsd.port.mk(5)) for building python, too, needs to be on a filesystem mounted with wxallowed (cf. mount(8)).

Creating a WRKOBJDIR for building python under /usr/local (which on a default OpenBSD installation is mounted with wxallowed):

doas mkdir /usr/local/pobj_wxallowed

Assuming PORTS_PRIVSEP=Yes (cf. bsd.port.mk(5)) and SUDO=doas are configured in /etc/mk.conf:

doas chown _pbuild:_pbuild /usr/local/pobj_wxallowed

Setting the WRKOBJDIR for building python:

echo WRKOBJDIR_lang/python/3.7=/usr/local/pobj_wxallowed  \\nWRKOBJDIR_lang/python/2.7=/usr/local/pobj_wxallowed >> /etc/mk.conf

Building Synapse:

cd /usr/ports/net/synapse
make install
Windows

If you wish to run or develop Synapse on Windows, the Windows Subsystem For Linux provides a Linux environment on Windows 10 which is capable of using the Debian, Fedora, or source installation methods. More information about WSL can be found at https://docs.microsoft.com/en-us/windows/wsl/install-win10 for Windows 10 and https://docs.microsoft.com/en-us/windows/wsl/install-on-server for Windows Server.

Prebuilt packages

As an alternative to installing from source, prebuilt packages are available for a number of platforms.

Docker images and Ansible playbooks

There is an official synapse image available at https://hub.docker.com/r/matrixdotorg/synapse which can be used with the docker-compose file available at contrib/docker. Further information on this including configuration options is available in the README on hub.docker.com.

Alternatively, Andreas Peters (previously Silvio Fricke) has contributed a Dockerfile to automate a synapse server in a single Docker image, at https://hub.docker.com/r/avhost/docker-matrix/tags/

Slavi Pantaleev has created an Ansible playbook, which installs the offical Docker image of Matrix Synapse along with many other Matrix-related services (Postgres database, Element, coturn, ma1sd, SSL support, etc.). For more details, see https://github.com/spantaleev/matrix-docker-ansible-deploy

Debian/Ubuntu

Matrix.org packages

Matrix.org provides Debian/Ubuntu packages of the latest stable version of Synapse via https://packages.matrix.org/debian/. They are available for Debian 9 (Stretch), Ubuntu 16.04 (Xenial), and later. To use them:

sudo apt install -y lsb-release wget apt-transport-https
sudo wget -O /usr/share/keyrings/matrix-org-archive-keyring.gpg https://packages.matrix.org/debian/matrix-org-archive-keyring.gpg
echo "deb [signed-by=/usr/share/keyrings/matrix-org-archive-keyring.gpg] https://packages.matrix.org/debian/ $(lsb_release -cs) main" |
    sudo tee /etc/apt/sources.list.d/matrix-org.list
sudo apt update
sudo apt install matrix-synapse-py3

Note: if you followed a previous version of these instructions which recommended using apt-key add to add an old key from https://matrix.org/packages/debian/, you should note that this key has been revoked. You should remove the old key with sudo apt-key remove C35EB17E1EAE708E6603A9B3AD0592FE47F0DF61, and follow the above instructions to update your configuration.

The fingerprint of the repository signing key (as shown by gpg /usr/share/keyrings/matrix-org-archive-keyring.gpg) is AAF9AE843A7584B5A3E4CD2BCF45A512DE2DA058.

Downstream Debian packages

We do not recommend using the packages from the default Debian buster repository at this time, as they are old and suffer from known security vulnerabilities. You can install the latest version of Synapse from our repository or from buster-backports. Please see the Debian documentation for information on how to use backports.

If you are using Debian sid or testing, Synapse is available in the default repositories and it should be possible to install it simply with:

sudo apt install matrix-synapse
Downstream Ubuntu packages

We do not recommend using the packages in the default Ubuntu repository at this time, as they are old and suffer from known security vulnerabilities. The latest version of Synapse can be installed from our repository.

Fedora

Synapse is in the Fedora repositories as matrix-synapse:

sudo dnf install matrix-synapse

Oleg Girko provides Fedora RPMs at https://obs.infoserver.lv/project/monitor/matrix-synapse

OpenSUSE

Synapse is in the OpenSUSE repositories as matrix-synapse:

sudo zypper install matrix-synapse

SUSE Linux Enterprise Server

Unofficial package are built for SLES 15 in the openSUSE:Backports:SLE-15 repository at https://download.opensuse.org/repositories/openSUSE:/Backports:/SLE-15/standard/

ArchLinux

The quickest way to get up and running with ArchLinux is probably with the community package https://www.archlinux.org/packages/community/any/matrix-synapse/, which should pull in most of the necessary dependencies.

pip may be outdated (6.0.7-1 and needs to be upgraded to 6.0.8-1 ):

sudo pip install --upgrade pip

If you encounter an error with lib bcrypt causing an Wrong ELF Class: ELFCLASS32 (x64 Systems), you may need to reinstall py-bcrypt to correctly compile it under the right architecture. (This should not be needed if installing under virtualenv):

sudo pip uninstall py-bcrypt
sudo pip install py-bcrypt

Void Linux

Synapse can be found in the void repositories as 'synapse':

xbps-install -Su
xbps-install -S synapse

FreeBSD

Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Molloy from:

  • Ports: cd /usr/ports/net-im/py-matrix-synapse && make install clean
  • Packages: pkg install py37-matrix-synapse

OpenBSD

As of OpenBSD 6.7 Synapse is available as a pre-compiled binary. The filesystem underlying the homeserver directory (defaults to /var/synapse) has to be mounted with wxallowed (cf. mount(8)), so creating a separate filesystem and mounting it to /var/synapse should be taken into consideration.

Installing Synapse:

doas pkg_add synapse

NixOS

Robin Lambertz has packaged Synapse for NixOS at: https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/matrix-synapse.nix

Setting up Synapse

Once you have installed synapse as above, you will need to configure it.

Using PostgreSQL

By default Synapse uses an SQLite database and in doing so trades performance for convenience. Almost all installations should opt to use PostgreSQL instead. Advantages include:

  • significant performance improvements due to the superior threading and caching model, smarter query optimiser
  • allowing the DB to be run on separate hardware

For information on how to install and use PostgreSQL in Synapse, please see docs/postgres.md

SQLite is only acceptable for testing purposes. SQLite should not be used in a production server. Synapse will perform poorly when using SQLite, especially when participating in large rooms.

TLS certificates

The default configuration exposes a single HTTP port on the local interface: http://localhost:8008. It is suitable for local testing, but for any practical use, you will need Synapse's APIs to be served over HTTPS.

The recommended way to do so is to set up a reverse proxy on port 8448. You can find documentation on doing so in docs/reverse_proxy.md.

Alternatively, you can configure Synapse to expose an HTTPS port. To do so, you will need to edit homeserver.yaml, as follows:

  • First, under the listeners section, uncomment the configuration for the TLS-enabled listener. (Remove the hash sign (#) at the start of each line). The relevant lines are like this:
  - port: 8448
    type: http
    tls: true
    resources:
      - names: [client, federation]

  • You will also need to uncomment the tls_certificate_path and tls_private_key_path lines under the TLS section. You will need to manage provisioning of these certificates yourself.

    If you are using your own certificate, be sure to use a .pem file that includes the full certificate chain including any intermediate certificates (for instance, if using certbot, use fullchain.pem as your certificate, not cert.pem).

For a more detailed guide to configuring your server for federation, see federate.md.

Client Well-Known URI

Setting up the client Well-Known URI is optional but if you set it up, it will allow users to enter their full username (e.g. @user:<server_name>) into clients which support well-known lookup to automatically configure the homeserver and identity server URLs. This is useful so that users don't have to memorize or think about the actual homeserver URL you are using.

The URL https://<server_name>/.well-known/matrix/client should return JSON in the following format.

{
  "m.homeserver": {
    "base_url": "https://<matrix.example.com>"
  }
}

It can optionally contain identity server information as well.

{
  "m.homeserver": {
    "base_url": "https://<matrix.example.com>"
  },
  "m.identity_server": {
    "base_url": "https://<identity.example.com>"
  }
}

To work in browser based clients, the file must be served with the appropriate Cross-Origin Resource Sharing (CORS) headers. A recommended value would be Access-Control-Allow-Origin: * which would allow all browser based clients to view it.

In nginx this would be something like:

location /.well-known/matrix/client {
    return 200 '{"m.homeserver": {"base_url": "https://<matrix.example.com>"}}';
    default_type application/json;
    add_header Access-Control-Allow-Origin *;
}

You should also ensure the public_baseurl option in homeserver.yaml is set correctly. public_baseurl should be set to the URL that clients will use to connect to your server. This is the same URL you put for the m.homeserver base_url above.

public_baseurl: "https://<matrix.example.com>"

Email

It is desirable for Synapse to have the capability to send email. This allows Synapse to send password reset emails, send verifications when an email address is added to a user's account, and send email notifications to users when they receive new messages.

To configure an SMTP server for Synapse, modify the configuration section headed email, and be sure to have at least the smtp_host, smtp_port and notif_from fields filled out. You may also need to set smtp_user, smtp_pass, and require_transport_security.

If email is not configured, password reset, registration and notifications via email will be disabled.

Registering a user

The easiest way to create a new user is to do so from a client like Element.

Alternatively, you can do so from the command line. This can be done as follows:

  1. If synapse was installed via pip, activate the virtualenv as follows (if Synapse was installed via a prebuilt package, register_new_matrix_user should already be on the search path): 
    cd ~/synapse
source env/bin/activate
synctl start # if not already running
  2. Run the following command: 
    register_new_matrix_user -c homeserver.yaml http://localhost:8008

This will prompt you to add details for the new user, and will then connect to the running Synapse to create the new user. For example:

New user localpart: erikj
Password:
Confirm password:
Make admin [no]:
Success!

This process uses a setting registration_shared_secret in homeserver.yaml, which is shared between Synapse itself and the register_new_matrix_user script. It doesn't matter what it is (a random value is generated by --generate-config), but it should be kept secret, as anyone with knowledge of it can register users, including admin accounts, on your server even if enable_registration is false.

Setting up a TURN server

For reliable VoIP calls to be routed via this homeserver, you MUST configure a TURN server. See docs/turn-howto.md for details.

URL previews

Synapse includes support for previewing URLs, which is disabled by default. To turn it on you must enable the url_preview_enabled: True config parameter and explicitly specify the IP ranges that Synapse is not allowed to spider for previewing in the url_preview_ip_range_blacklist configuration parameter. This is critical from a security perspective to stop arbitrary Matrix users spidering 'internal' URLs on your network. At the very least we recommend that your loopback and RFC1918 IP addresses are blacklisted.

This also requires the optional lxml python dependency to be installed. This in turn requires the libxml2 library to be available - on Debian/Ubuntu this means apt-get install libxml2-dev, or equivalent for your OS.

Troubleshooting Installation

pip seems to leak lots of memory during installation. For instance, a Linux host with 512MB of RAM may run out of memory whilst installing Twisted. If this happens, you will have to individually install the dependencies which are failing, e.g.:

pip install twisted

If you have any other problems, feel free to ask in #synapse:matrix.org.

Using Postgres

Synapse supports PostgreSQL versions 9.6 or later.

Install postgres client libraries

Synapse will require the python postgres client library in order to connect to a postgres database.

  • If you are using the matrix.org debian/ubuntu packages, the necessary python library will already be installed, but you will need to ensure the low-level postgres library is installed, which you can do with apt install libpq5.

  • For other pre-built packages, please consult the documentation from the relevant package.

  • If you installed synapse in a virtualenv, you can install the library with:

    ~/synapse/env/bin/pip install "matrix-synapse[postgres]"

    (substituting the path to your virtualenv for ~/synapse/env, if you used a different path). You will require the postgres development files. These are in the libpq-dev package on Debian-derived distributions.

Set up database

Assuming your PostgreSQL database user is called postgres, first authenticate as the database user with:

su - postgres
# Or, if your system uses sudo to get administrative rights
sudo -u postgres bash

Then, create a postgres user and a database with:

# this will prompt for a password for the new user
createuser --pwprompt synapse_user

createdb --encoding=UTF8 --locale=C --template=template0 --owner=synapse_user synapse

The above will create a user called synapse_user, and a database called synapse.

Note that the PostgreSQL database must have the correct encoding set (as shown above), otherwise it will not be able to store UTF8 strings.

You may need to enable password authentication so synapse_user can connect to the database. See https://www.postgresql.org/docs/current/auth-pg-hba-conf.html.

Synapse config

When you are ready to start using PostgreSQL, edit the database section in your config file to match the following lines:

database:
  name: psycopg2
  args:
    user: <user>
    password: <pass>
    database: <db>
    host: <host>
    cp_min: 5
    cp_max: 10

All key, values in args are passed to the psycopg2.connect(..) function, except keys beginning with cp_, which are consumed by the twisted adbapi connection pool. See the libpq documentation for a list of options which can be passed.

You should consider tuning the args.keepalives_* options if there is any danger of the connection between your homeserver and database dropping, otherwise Synapse may block for an extended period while it waits for a response from the database server. Example values might be:

database:
  args:
    # ... as above

    # seconds of inactivity after which TCP should send a keepalive message to the server
    keepalives_idle: 10

    # the number of seconds after which a TCP keepalive message that is not
    # acknowledged by the server should be retransmitted
    keepalives_interval: 10

    # the number of TCP keepalives that can be lost before the client's connection
    # to the server is considered dead
    keepalives_count: 3

Tuning Postgres

The default settings should be fine for most deployments. For larger scale deployments tuning some of the settings is recommended, details of which can be found at https://wiki.postgresql.org/wiki/Tuning_Your_PostgreSQL_Server.

In particular, we've found tuning the following values helpful for performance:

  • shared_buffers
  • effective_cache_size
  • work_mem
  • maintenance_work_mem
  • autovacuum_work_mem

Note that the appropriate values for those fields depend on the amount of free memory the database host has available.

Porting from SQLite

Overview

The script synapse_port_db allows porting an existing synapse server backed by SQLite to using PostgreSQL. This is done in as a two phase process:

  1. Copy the existing SQLite database to a separate location and run the port script against that offline database.
  2. Shut down the server. Rerun the port script to port any data that has come in since taking the first snapshot. Restart server against the PostgreSQL database.

The port script is designed to be run repeatedly against newer snapshots of the SQLite database file. This makes it safe to repeat step 1 if there was a delay between taking the previous snapshot and being ready to do step 2.

It is safe to at any time kill the port script and restart it.

Note that the database may take up significantly more (25% - 100% more) space on disk after porting to Postgres.

Using the port script

Firstly, shut down the currently running synapse server and copy its database file (typically homeserver.db) to another location. Once the copy is complete, restart synapse. For instance:

./synctl stop
cp homeserver.db homeserver.db.snapshot
./synctl start

Copy the old config file into a new config file:

cp homeserver.yaml homeserver-postgres.yaml

Edit the database section as described in the section Synapse config above and with the SQLite snapshot located at homeserver.db.snapshot simply run:

synapse_port_db --sqlite-database homeserver.db.snapshot \
    --postgres-config homeserver-postgres.yaml

The flag --curses displays a coloured curses progress UI.

If the script took a long time to complete, or time has otherwise passed since the original snapshot was taken, repeat the previous steps with a newer snapshot.

To complete the conversion shut down the synapse server and run the port script one last time, e.g. if the SQLite database is at homeserver.db run:

synapse_port_db --sqlite-database homeserver.db \
    --postgres-config homeserver-postgres.yaml

Once that has completed, change the synapse config to point at the PostgreSQL database configuration file homeserver-postgres.yaml:

./synctl stop
mv homeserver.yaml homeserver-old-sqlite.yaml
mv homeserver-postgres.yaml homeserver.yaml
./synctl start

Synapse should now be running against PostgreSQL.

Troubleshooting

Alternative auth methods

If you get an error along the lines of FATAL: Ident authentication failed for user "synapse_user", you may need to use an authentication method other than ident:

  • If the synapse_user user has a password, add the password to the database: section of homeserver.yaml. Then add the following to pg_hba.conf:

    host    synapse     synapse_user    ::1/128     md5  # or `scram-sha-256` instead of `md5` if you use that

  • If the synapse_user user does not have a password, then a password doesn't have to be added to homeserver.yaml. But the following does need to be added to pg_hba.conf:

    host    synapse     synapse_user    ::1/128     trust

Note that line order matters in pg_hba.conf, so make sure that if you do add a new line, it is inserted before:

host    all         all             ::1/128     ident

Fixing incorrect COLLATE or CTYPE

Synapse will refuse to set up a new database if it has the wrong values of COLLATE and CTYPE set, and will log warnings on existing databases. Using different locales can cause issues if the locale library is updated from underneath the database, or if a different version of the locale is used on any replicas.

The safest way to fix the issue is to dump the database and recreate it with the correct locale parameter (as shown above). It is also possible to change the parameters on a live database and run a REINDEX on the entire database, however extreme care must be taken to avoid database corruption.

Note that the above may fail with an error about duplicate rows if corruption has already occurred, and such duplicate rows will need to be manually removed.

Fixing inconsistent sequences error

Synapse uses Postgres sequences to generate IDs for various tables. A sequence and associated table can get out of sync if, for example, Synapse has been downgraded and then upgraded again.

To fix the issue shut down Synapse (including any and all workers) and run the SQL command included in the error message. Once done Synapse should start successfully.

Using a reverse proxy with Synapse

It is recommended to put a reverse proxy such as nginx, Apache, Caddy, HAProxy or relayd in front of Synapse. One advantage of doing so is that it means that you can expose the default https port (443) to Matrix clients without needing to run Synapse with root privileges.

You should configure your reverse proxy to forward requests to /_matrix or /_synapse/client to Synapse, and have it set the X-Forwarded-For and X-Forwarded-Proto request headers.

You should remember that Matrix clients and other Matrix servers do not necessarily need to connect to your server via the same server name or port. Indeed, clients will use port 443 by default, whereas servers default to port 8448. Where these are different, we refer to the 'client port' and the 'federation port'. See the Matrix specification for more details of the algorithm used for federation connections, and delegate.md for instructions on setting up delegation.

NOTE: Your reverse proxy must not canonicalise or normalise the requested URI in any way (for example, by decoding %xx escapes). Beware that Apache will canonicalise URIs unless you specify nocanon.

Let's assume that we expect clients to connect to our server at https://matrix.example.com, and other servers to connect at https://example.com:8448. The following sections detail the configuration of the reverse proxy and the homeserver.

Reverse-proxy configuration examples

NOTE: You only need one of these.

nginx

server {
    listen 443 ssl http2;
    listen [::]:443 ssl http2;

    # For the federation port
    listen 8448 ssl http2 default_server;
    listen [::]:8448 ssl http2 default_server;

    server_name matrix.example.com;

    location ~* ^(\/_matrix|\/_synapse\/client) {
        proxy_pass http://localhost:8008;
        proxy_set_header X-Forwarded-For $remote_addr;
        proxy_set_header X-Forwarded-Proto $scheme;
        proxy_set_header Host $host;

        # Nginx by default only allows file uploads up to 1M in size
        # Increase client_max_body_size to match max_upload_size defined in homeserver.yaml
        client_max_body_size 50M;
    }
}

NOTE: Do not add a path after the port in proxy_pass, otherwise nginx will canonicalise/normalise the URI.

Caddy 1

matrix.example.com {
  proxy /_matrix http://localhost:8008 {
    transparent
  }

  proxy /_synapse/client http://localhost:8008 {
    transparent
  }
}

example.com:8448 {
  proxy / http://localhost:8008 {
    transparent
  }
}

Caddy 2

matrix.example.com {
  reverse_proxy /_matrix/* http://localhost:8008
  reverse_proxy /_synapse/client/* http://localhost:8008
}

example.com:8448 {
  reverse_proxy http://localhost:8008
}

Apache

<VirtualHost *:443>
    SSLEngine on
    ServerName matrix.example.com

    RequestHeader set "X-Forwarded-Proto" expr=%{REQUEST_SCHEME}
    AllowEncodedSlashes NoDecode
    ProxyPreserveHost on
    ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
    ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
    ProxyPass /_synapse/client http://127.0.0.1:8008/_synapse/client nocanon
    ProxyPassReverse /_synapse/client http://127.0.0.1:8008/_synapse/client
</VirtualHost>

<VirtualHost *:8448>
    SSLEngine on
    ServerName example.com

    RequestHeader set "X-Forwarded-Proto" expr=%{REQUEST_SCHEME}
    AllowEncodedSlashes NoDecode
    ProxyPass /_matrix http://127.0.0.1:8008/_matrix nocanon
    ProxyPassReverse /_matrix http://127.0.0.1:8008/_matrix
</VirtualHost>

NOTE: ensure the nocanon options are included.

NOTE 2: It appears that Synapse is currently incompatible with the ModSecurity module for Apache (mod_security2). If you need it enabled for other services on your web server, you can disable it for Synapse's two VirtualHosts by including the following lines before each of the two </VirtualHost> above:

<IfModule security2_module>
    SecRuleEngine off
</IfModule>

NOTE 3: Missing ProxyPreserveHost on can lead to a redirect loop.

HAProxy

frontend https
  bind :::443 v4v6 ssl crt /etc/ssl/haproxy/ strict-sni alpn h2,http/1.1
  http-request set-header X-Forwarded-Proto https if { ssl_fc }
  http-request set-header X-Forwarded-Proto http if !{ ssl_fc }
  http-request set-header X-Forwarded-For %[src]

  # Matrix client traffic
  acl matrix-host hdr(host) -i matrix.example.com
  acl matrix-path path_beg /_matrix
  acl matrix-path path_beg /_synapse/client

  use_backend matrix if matrix-host matrix-path

frontend matrix-federation
  bind :::8448 v4v6 ssl crt /etc/ssl/haproxy/synapse.pem alpn h2,http/1.1
  http-request set-header X-Forwarded-Proto https if { ssl_fc }
  http-request set-header X-Forwarded-Proto http if !{ ssl_fc }
  http-request set-header X-Forwarded-For %[src]

  default_backend matrix

backend matrix
  server matrix 127.0.0.1:8008

Relayd

table <webserver>    { 127.0.0.1 }
table <matrixserver> { 127.0.0.1 }

http protocol "https" {
    tls { no tlsv1.0, ciphers "HIGH" }
    tls keypair "example.com"
    match header set "X-Forwarded-For"   value "$REMOTE_ADDR"
    match header set "X-Forwarded-Proto" value "https"

    # set CORS header for .well-known/matrix/server, .well-known/matrix/client
    # httpd does not support setting headers, so do it here
    match request path "/.well-known/matrix/*" tag "matrix-cors"
    match response tagged "matrix-cors" header set "Access-Control-Allow-Origin" value "*"

    pass quick path "/_matrix/*"         forward to <matrixserver>
    pass quick path "/_synapse/client/*" forward to <matrixserver>

    # pass on non-matrix traffic to webserver
    pass                                 forward to <webserver>
}

relay "https_traffic" {
    listen on egress port 443 tls
    protocol "https"
    forward to <matrixserver> port 8008 check tcp
    forward to <webserver>    port 8080 check tcp
}

http protocol "matrix" {
    tls { no tlsv1.0, ciphers "HIGH" }
    tls keypair "example.com"
    block
    pass quick path "/_matrix/*"         forward to <matrixserver>
    pass quick path "/_synapse/client/*" forward to <matrixserver>
}

relay "matrix_federation" {
    listen on egress port 8448 tls
    protocol "matrix"
    forward to <matrixserver> port 8008 check tcp
}

Homeserver Configuration

You will also want to set bind_addresses: ['127.0.0.1'] and x_forwarded: true for port 8008 in homeserver.yaml to ensure that client IP addresses are recorded correctly.

Having done so, you can then use https://matrix.example.com (instead of https://matrix.example.com:8448) as the "Custom server" when connecting to Synapse from a client.

Health check endpoint

Synapse exposes a health check endpoint for use by reverse proxies. Each configured HTTP listener has a /health endpoint which always returns 200 OK (and doesn't get logged).

Synapse administration endpoints

Endpoints for administering your Synapse instance are placed under /_synapse/admin. These require authentication through an access token of an admin user. However as access to these endpoints grants the caller a lot of power, we do not recommend exposing them to the public internet without good reason.

Overview

This document explains how to enable VoIP relaying on your Home Server with TURN.

The synapse Matrix Home Server supports integration with TURN server via the TURN server REST API. This allows the Home Server to generate credentials that are valid for use on the TURN server through the use of a secret shared between the Home Server and the TURN server.

The following sections describe how to install coturn (which implements the TURN REST API) and integrate it with synapse.

Requirements

For TURN relaying with coturn to work, it must be hosted on a server/endpoint with a public IP.

Hosting TURN behind a NAT (even with appropriate port forwarding) is known to cause issues and to often not work.

coturn setup

Initial installation

The TURN daemon coturn is available from a variety of sources such as native package managers, or installation from source.

Debian installation

Just install the debian package:

apt install coturn

This will install and start a systemd service called coturn.

Source installation

  1. Download the latest release from github. Unpack it and cd into the directory.

  2. Configure it:

    ./configure

    You may need to install libevent2: if so, you should do so in the way recommended by your operating system. You can ignore warnings about lack of database support: a database is unnecessary for this purpose.

  3. Build and install it:

    make
make install

Configuration

  1. Create or edit the config file in /etc/turnserver.conf. The relevant lines, with example values, are:

    use-auth-secret
static-auth-secret=[your secret key here]
realm=turn.myserver.org

    See turnserver.conf for explanations of the options. One way to generate the static-auth-secret is with pwgen:

    pwgen -s 64 1

    A realm must be specified, but its value is somewhat arbitrary. (It is sent to clients as part of the authentication flow.) It is conventional to set it to be your server name.

  2. You will most likely want to configure coturn to write logs somewhere. The easiest way is normally to send them to the syslog:

    syslog

    (in which case, the logs will be available via journalctl -u coturn on a systemd system). Alternatively, coturn can be configured to write to a logfile - check the example config file supplied with coturn.

  3. Consider your security settings. TURN lets users request a relay which will connect to arbitrary IP addresses and ports. The following configuration is suggested as a minimum starting point:

    # VoIP traffic is all UDP. There is no reason to let users connect to arbitrary TCP endpoints via the relay.
no-tcp-relay

# don't let the relay ever try to connect to private IP address ranges within your network (if any)
# given the turn server is likely behind your firewall, remember to include any privileged public IPs too.
denied-peer-ip=10.0.0.0-10.255.255.255
denied-peer-ip=192.168.0.0-192.168.255.255
denied-peer-ip=172.16.0.0-172.31.255.255

# special case the turn server itself so that client->TURN->TURN->client flows work
allowed-peer-ip=10.0.0.1

# consider whether you want to limit the quota of relayed streams per user (or total) to avoid risk of DoS.
user-quota=12 # 4 streams per video call, so 12 streams = 3 simultaneous relayed calls per user.
total-quota=1200

  4. Also consider supporting TLS/DTLS. To do this, add the following settings to turnserver.conf:

    # TLS certificates, including intermediate certs.
# For Let's Encrypt certificates, use `fullchain.pem` here.
cert=/path/to/fullchain.pem

# TLS private key file
pkey=/path/to/privkey.pem

    In this case, replace the turn: schemes in the turn_uri settings below with turns:.

    We recommend that you only try to set up TLS/DTLS once you have set up a basic installation and got it working.

  5. Ensure your firewall allows traffic into the TURN server on the ports you've configured it to listen on (By default: 3478 and 5349 for TURN traffic (remember to allow both TCP and UDP traffic), and ports 49152-65535 for the UDP relay.)

  6. We do not recommend running a TURN server behind NAT, and are not aware of anyone doing so successfully.

    If you want to try it anyway, you will at least need to tell coturn its external IP address:

    external-ip=192.88.99.1

    ... and your NAT gateway must forward all of the relayed ports directly (eg, port 56789 on the external IP must be always be forwarded to port 56789 on the internal IP).

    If you get this working, let us know!

  7. (Re)start the turn server:

    • If you used the Debian package (or have set up a systemd unit yourself):

      systemctl restart coturn

    • If you installed from source:

      bin/turnserver -o

Synapse setup

Your home server configuration file needs the following extra keys:

  1. "turn_uris": This needs to be a yaml list of public-facing URIs for your TURN server to be given out to your clients. Add separate entries for each transport your TURN server supports.
  2. "turn_shared_secret": This is the secret shared between your Home server and your TURN server, so you should set it to the same string you used in turnserver.conf.
  3. "turn_user_lifetime": This is the amount of time credentials generated by your Home Server are valid for (in milliseconds). Shorter times offer less potential for abuse at the expense of increased traffic between web clients and your home server to refresh credentials. The TURN REST API specification recommends one day (86400000).
  4. "turn_allow_guests": Whether to allow guest users to use the TURN server. This is enabled by default, as otherwise VoIP will not work reliably for guests. However, it does introduce a security risk as it lets guests connect to arbitrary endpoints without having gone through a CAPTCHA or similar to register a real account.

As an example, here is the relevant section of the config file for matrix.org. The turn_uris are appropriate for TURN servers listening on the default ports, with no TLS.

turn_uris: [ "turn:turn.matrix.org?transport=udp", "turn:turn.matrix.org?transport=tcp" ]
turn_shared_secret: "n0t4ctuAllymatr1Xd0TorgSshar3d5ecret4obvIousreAsons"
turn_user_lifetime: 86400000
turn_allow_guests: True

After updating the homeserver configuration, you must restart synapse:

  • If you use synctl: 
    cd /where/you/run/synapse
./synctl restart
  • If you use systemd: 
    systemctl restart matrix-synapse.service

... and then reload any clients (or wait an hour for them to refresh their settings).

Troubleshooting

The normal symptoms of a misconfigured TURN server are that calls between devices on different networks ring, but get stuck at "call connecting". Unfortunately, troubleshooting this can be tricky.

Here are a few things to try:

  • Check that your TURN server is not behind NAT. As above, we're not aware of anyone who has successfully set this up.

  • Check that you have opened your firewall to allow TCP and UDP traffic to the TURN ports (normally 3478 and 5479).

  • Check that you have opened your firewall to allow UDP traffic to the UDP relay ports (49152-65535 by default).

  • Some WebRTC implementations (notably, that of Google Chrome) appear to get confused by TURN servers which are reachable over IPv6 (this appears to be an unexpected side-effect of its handling of multiple IP addresses as defined by draft-ietf-rtcweb-ip-handling).

    Try removing any AAAA records for your TURN server, so that it is only reachable over IPv4.

  • Enable more verbose logging in coturn via the verbose setting:

    verbose

    ... and then see if there are any clues in its logs.

  • If you are using a browser-based client under Chrome, check chrome://webrtc-internals/ for insights into the internals of the negotiation. On Firefox, check the "Connection Log" on about:webrtc.

    (Understanding the output is beyond the scope of this document!)

  • You can test your Matrix homeserver TURN setup with https://test.voip.librepush.net/. Note that this test is not fully reliable yet, so don't be discouraged if the test fails. Here is the github repo of the source of the tester, where you can file bug reports.

  • There is a WebRTC test tool at https://webrtc.github.io/samples/src/content/peerconnection/trickle-ice/. To use it, you will need a username/password for your TURN server. You can either:

    • look for the GET /_matrix/client/r0/voip/turnServer request made by a matrix client to your homeserver in your browser's network inspector. In the response you should see username and password. Or:

    • Use the following shell commands:

      secret=staticAuthSecretHere

u=$((`date +%s` + 3600)):test
p=$(echo -n $u | openssl dgst -hmac $secret -sha1 -binary | base64)
echo -e "username: $u\npassword: $p"

      Or:

    • Temporarily configure coturn to accept a static username/password. To do this, comment out use-auth-secret and static-auth-secret and add the following:

      lt-cred-mech
user=username:password

      Note: these settings will not take effect unless use-auth-secret and static-auth-secret are disabled.

      Restart coturn after changing the configuration file.

      Remember to restore the original settings to go back to testing with Matrix clients!

    If the TURN server is working correctly, you should see at least one relay entry in the results.

Delegation

By default, other homeservers will expect to be able to reach yours via your server_name, on port 8448. For example, if you set your server_name to example.com (so that your user names look like @user:example.com), other servers will try to connect to yours at https://example.com:8448/.

Delegation is a Matrix feature allowing a homeserver admin to retain a server_name of example.com so that user IDs, room aliases, etc continue to look like *:example.com, whilst having federation traffic routed to a different server and/or port (e.g. synapse.example.com:443).

.well-known delegation

To use this method, you need to be able to alter the server_name 's https server to serve the /.well-known/matrix/server URL. Having an active server (with a valid TLS certificate) serving your server_name domain is out of the scope of this documentation.

The URL https://<server_name>/.well-known/matrix/server should return a JSON structure containing the key m.server like so:

{
    "m.server": "<synapse.server.name>[:<yourport>]"
}

In our example, this would mean that URL https://example.com/.well-known/matrix/server should return:

{
    "m.server": "synapse.example.com:443"
}

Note, specifying a port is optional. If no port is specified, then it defaults to 8448.

With .well-known delegation, federating servers will check for a valid TLS certificate for the delegated hostname (in our example: synapse.example.com).

SRV DNS record delegation

It is also possible to do delegation using a SRV DNS record. However, that is considered an advanced topic since it's a bit complex to set up, and .well-known delegation is already enough in most cases.

However, if you really need it, you can find some documentation on how such a record should look like and how Synapse will use it in the Matrix specification.

Delegation FAQ

When do I need delegation?

If your homeserver's APIs are accessible on the default federation port (8448) and the domain your server_name points to, you do not need any delegation.

For instance, if you registered example.com and pointed its DNS A record at a fresh server, you could install Synapse on that host, giving it a server_name of example.com, and once a reverse proxy has been set up to proxy all requests sent to the port 8448 and serve TLS certificates for example.com, you wouldn't need any delegation set up.

However, if your homeserver's APIs aren't accessible on port 8448 and on the domain server_name points to, you will need to let other servers know how to find it using delegation.

Do you still recommend against using a reverse proxy on the federation port?

We no longer actively recommend against using a reverse proxy. Many admins will find it easier to direct federation traffic to a reverse proxy and manage their own TLS certificates, and this is a supported configuration.

See reverse_proxy.md for information on setting up a reverse proxy.

Do I still need to give my TLS certificates to Synapse if I am using a reverse proxy?

This is no longer necessary. If you are using a reverse proxy for all of your TLS traffic, then you can set no_tls: True in the Synapse config.

In that case, the only reason Synapse needs the certificate is to populate a legacy tls_fingerprints field in the federation API. This is ignored by Synapse 0.99.0 and later, and the only time pre-0.99 Synapses will check it is when attempting to fetch the server keys - and generally this is delegated via matrix.org, which is running a modern version of Synapse.

Do I need the same certificate for the client and federation port?

No. There is nothing stopping you from using different certificates, particularly if you are using a reverse proxy.

Upgrading Synapse

Before upgrading check if any special steps are required to upgrade from the version you currently have installed to the current version of Synapse. The extra instructions that may be required are listed later in this document.

  • Check that your versions of Python and PostgreSQL are still supported.

    Synapse follows upstream lifecycles for Python_ and PostgreSQL_, and removes support for versions which are no longer maintained.

    The website https://endoflife.date also offers convenient summaries.

    .. _Python: https://devguide.python.org/devcycle/#end-of-life-branches .. _PostgreSQL: https://www.postgresql.org/support/versioning/

  • If Synapse was installed using prebuilt packages <INSTALL.md#prebuilt-packages>_, you will need to follow the normal process for upgrading those packages.

  • If Synapse was installed from source, then:

    1. Activate the virtualenv before upgrading. For example, if Synapse is installed in a virtualenv in ~/synapse/env then run:

      .. code:: bash

      source ~/synapse/env/bin/activate

    2. If Synapse was installed using pip then upgrade to the latest version by running:

      .. code:: bash

      pip install --upgrade matrix-synapse

      If Synapse was installed using git then upgrade to the latest version by running:

      .. code:: bash

      git pull pip install --upgrade .

    3. Restart Synapse:

      .. code:: bash

      ./synctl restart

To check whether your update was successful, you can check the running server version with:

.. code:: bash

# you may need to replace 'localhost:8008' if synapse is not configured
# to listen on port 8008.

curl http://localhost:8008/_synapse/admin/v1/server_version

Rolling back to older versions

Rolling back to previous releases can be difficult, due to database schema changes between releases. Where we have been able to test the rollback process, this will be noted below.

In general, you will need to undo any changes made during the upgrade process, for example:

  • pip:

    .. code:: bash

    source env/bin/activate

    replace 1.3.0 accordingly:

    pip install matrix-synapse==1.3.0

  • Debian:

    .. code:: bash

    replace 1.3.0 and stretch accordingly:

    wget https://packages.matrix.org/debian/pool/main/m/matrix-synapse-py3/matrix-synapse-py3_1.3.0+stretch1_amd64.deb dpkg -i matrix-synapse-py3_1.3.0+stretch1_amd64.deb

Upgrading to v1.37.0

Deprecation of the current spam checker interface

The current spam checker interface is deprecated in favour of a new generic modules system. Authors of spam checker modules can refer to this documentation <https://matrix-org.github.io/synapse/develop/modules.html#porting-an-existing-module-that-uses-the-old-interface>_ to update their modules. Synapse administrators can refer to this documentation <https://matrix-org.github.io/synapse/develop/modules.html#using-modules>_ to update their configuration once the modules they are using have been updated.

We plan to remove support for the current spam checker interface in August 2021.

More module interfaces will be ported over to this new generic system in future versions of Synapse.

Upgrading to v1.34.0

room_invite_state_types configuration setting

The room_invite_state_types configuration setting has been deprecated and replaced with room_prejoin_state. See the sample configuration file <https://github.com/matrix-org/synapse/blob/v1.34.0/docs/sample_config.yaml#L1515>_.

If you have set room_invite_state_types to the default value you should simply remove it from your configuration file. The default value used to be:

.. code:: yaml

room_invite_state_types: - "m.room.join_rules" - "m.room.canonical_alias" - "m.room.avatar" - "m.room.encryption" - "m.room.name"

If you have customised this value, you should remove room_invite_state_types and configure room_prejoin_state instead.

Upgrading to v1.33.0

Account Validity HTML templates can now display a user's expiration date

This may affect you if you have enabled the account validity feature, and have made use of a custom HTML template specified by the account_validity.template_dir or account_validity.account_renewed_html_path Synapse config options.

The template can now accept an expiration_ts variable, which represents the unix timestamp in milliseconds for the future date of which their account has been renewed until. See the default template <https://github.com/matrix-org/synapse/blob/release-v1.33.0/synapse/res/templates/account_renewed.html>_ for an example of usage.

ALso note that a new HTML template, account_previously_renewed.html, has been added. This is is shown to users when they attempt to renew their account with a valid renewal token that has already been used before. The default template contents can been found here <https://github.com/matrix-org/synapse/blob/release-v1.33.0/synapse/res/templates/account_previously_renewed.html>_, and can also accept an expiration_ts variable. This template replaces the error message users would previously see upon attempting to use a valid renewal token more than once.

Upgrading to v1.32.0

Regression causing connected Prometheus instances to become overwhelmed

This release introduces a regression <https://github.com/matrix-org/synapse/issues/9853>_ that can overwhelm connected Prometheus instances. This issue is not present in Synapse v1.32.0rc1.

If you have been affected, please downgrade to 1.31.0. You then may need to remove excess writeahead logs in order for Prometheus to recover. Instructions for doing so are provided here <https://github.com/matrix-org/synapse/pull/9854#issuecomment-823472183>_.

Dropping support for old Python, Postgres and SQLite versions

In line with our deprecation policy <https://github.com/matrix-org/synapse/blob/release-v1.32.0/docs/deprecation_policy.md>_, we've dropped support for Python 3.5 and PostgreSQL 9.5, as they are no longer supported upstream.

This release of Synapse requires Python 3.6+ and PostgresSQL 9.6+ or SQLite 3.22+.

Removal of old List Accounts Admin API

The deprecated v1 "list accounts" admin API (GET /_synapse/admin/v1/users/<user_id>) has been removed in this version.

The v2 list accounts API <https://github.com/matrix-org/synapse/blob/master/docs/admin_api/user_admin_api.rst#list-accounts>_ has been available since Synapse 1.7.0 (2019-12-13), and is accessible under GET /_synapse/admin/v2/users.

The deprecation of the old endpoint was announced with Synapse 1.28.0 (released on 2021-02-25).

Application Services must use type m.login.application_service when registering users

In compliance with the Application Service spec <https://matrix.org/docs/spec/application_service/r0.1.2#server-admin-style-permissions>_, Application Services are now required to use the m.login.application_service type when registering users via the /_matrix/client/r0/register endpoint. This behaviour was deprecated in Synapse v1.30.0.

Please ensure your Application Services are up to date.

Upgrading to v1.29.0

Requirement for X-Forwarded-Proto header

When using Synapse with a reverse proxy (in particular, when using the x_forwarded option on an HTTP listener), Synapse now expects to receive an X-Forwarded-Proto header on incoming HTTP requests. If it is not set, Synapse will log a warning on each received request.

To avoid the warning, administrators using a reverse proxy should ensure that the reverse proxy sets X-Forwarded-Proto header to https or http to indicate the protocol used by the client.

Synapse also requires the Host header to be preserved.

See the reverse proxy documentation <docs/reverse_proxy.md>_, where the example configurations have been updated to show how to set these headers.

(Users of Caddy <https://caddyserver.com/>_ are unaffected, since we believe it sets X-Forwarded-Proto by default.)

Upgrading to v1.27.0

Changes to callback URI for OAuth2 / OpenID Connect and SAML2

This version changes the URI used for callbacks from OAuth2 and SAML2 identity providers:

  • If your server is configured for single sign-on via an OpenID Connect or OAuth2 identity provider, you will need to add [synapse public baseurl]/_synapse/client/oidc/callback to the list of permitted "redirect URIs" at the identity provider.

    See docs/openid.md <docs/openid.md>_ for more information on setting up OpenID Connect.

  • If your server is configured for single sign-on via a SAML2 identity provider, you will need to add [synapse public baseurl]/_synapse/client/saml2/authn_response as a permitted "ACS location" (also known as "allowed callback URLs") at the identity provider.

    The "Issuer" in the "AuthnRequest" to the SAML2 identity provider is also updated to [synapse public baseurl]/_synapse/client/saml2/metadata.xml. If your SAML2 identity provider uses this property to validate or otherwise identify Synapse, its configuration will need to be updated to use the new URL. Alternatively you could create a new, separate "EntityDescriptor" in your SAML2 identity provider with the new URLs and leave the URLs in the existing "EntityDescriptor" as they were.

Changes to HTML templates

The HTML templates for SSO and email notifications now have Jinja2's autoescape <https://jinja.palletsprojects.com/en/2.11.x/api/#autoescaping>_ enabled for files ending in .html, .htm, and .xml. If you have customised these templates and see issues when viewing them you might need to update them. It is expected that most configurations will need no changes.

If you have customised the templates names for these templates, it is recommended to verify they end in .html to ensure autoescape is enabled.

The above applies to the following templates:

  • add_threepid.html
  • add_threepid_failure.html
  • add_threepid_success.html
  • notice_expiry.html
  • notice_expiry.html
  • notif_mail.html (which, by default, includes room.html and notif.html)
  • password_reset.html
  • password_reset_confirmation.html
  • password_reset_failure.html
  • password_reset_success.html
  • registration.html
  • registration_failure.html
  • registration_success.html
  • sso_account_deactivated.html
  • sso_auth_bad_user.html
  • sso_auth_confirm.html
  • sso_auth_success.html
  • sso_error.html
  • sso_login_idp_picker.html
  • sso_redirect_confirm.html

Upgrading to v1.26.0

Rolling back to v1.25.0 after a failed upgrade

v1.26.0 includes a lot of large changes. If something problematic occurs, you may want to roll-back to a previous version of Synapse. Because v1.26.0 also includes a new database schema version, reverting that version is also required alongside the generic rollback instructions mentioned above. In short, to roll back to v1.25.0 you need to:

  1. Stop the server

  2. Decrease the schema version in the database:

    .. code:: sql

    UPDATE schema_version SET version = 58;

  3. Delete the ignored users & chain cover data:

    .. code:: sql

    DROP TABLE IF EXISTS ignored_users; UPDATE rooms SET has_auth_chain_index = false;

    For PostgreSQL run:

    .. code:: sql

    TRUNCATE event_auth_chain_links; TRUNCATE event_auth_chains;

    For SQLite run:

    .. code:: sql

    DELETE FROM event_auth_chain_links; DELETE FROM event_auth_chains;

  4. Mark the deltas as not run (so they will re-run on upgrade).

    .. code:: sql

    DELETE FROM applied_schema_deltas WHERE version = 59 AND file = "59/01ignored_user.py"; DELETE FROM applied_schema_deltas WHERE version = 59 AND file = "59/06chain_cover_index.sql";

  5. Downgrade Synapse by following the instructions for your installation method in the "Rolling back to older versions" section above.

Upgrading to v1.25.0

Last release supporting Python 3.5

This is the last release of Synapse which guarantees support with Python 3.5, which passed its upstream End of Life date several months ago.

We will attempt to maintain support through March 2021, but without guarantees.

In the future, Synapse will follow upstream schedules for ending support of older versions of Python and PostgreSQL. Please upgrade to at least Python 3.6 and PostgreSQL 9.6 as soon as possible.

Blacklisting IP ranges

Synapse v1.25.0 includes new settings, ip_range_blacklist and ip_range_whitelist, for controlling outgoing requests from Synapse for federation, identity servers, push, and for checking key validity for third-party invite events. The previous setting, federation_ip_range_blacklist, is deprecated. The new ip_range_blacklist defaults to private IP ranges if it is not defined.

If you have never customised federation_ip_range_blacklist it is recommended that you remove that setting.

If you have customised federation_ip_range_blacklist you should update the setting name to ip_range_blacklist.

If you have a custom push server that is reached via private IP space you may need to customise ip_range_blacklist or ip_range_whitelist.

Upgrading to v1.24.0

Custom OpenID Connect mapping provider breaking change

This release allows the OpenID Connect mapping provider to perform normalisation of the localpart of the Matrix ID. This allows for the mapping provider to specify different algorithms, instead of the default way.

If your Synapse configuration uses a custom mapping provider (oidc_config.user_mapping_provider.module is specified and not equal to synapse.handlers.oidc_handler.JinjaOidcMappingProvider) then you must ensure that map_user_attributes of the mapping provider performs some normalisation of the localpart returned. To match previous behaviour you can use the map_username_to_mxid_localpart function provided by Synapse. An example is shown below:

.. code-block:: python

from synapse.types import map_username_to_mxid_localpart

class MyMappingProvider: def map_user_attributes(self, userinfo, token): # ... your custom logic ... sso_user_id = ... localpart = map_username_to_mxid_localpart(sso_user_id)

      return {"localpart": localpart}

Removal historical Synapse Admin API

Historically, the Synapse Admin API has been accessible under:

  • /_matrix/client/api/v1/admin
  • /_matrix/client/unstable/admin
  • /_matrix/client/r0/admin
  • /_synapse/admin/v1

The endpoints with /_matrix/client/* prefixes have been removed as of v1.24.0. The Admin API is now only accessible under:

  • /_synapse/admin/v1

The only exception is the /admin/whois endpoint, which is also available via the client-server API <https://matrix.org/docs/spec/client_server/r0.6.1#get-matrix-client-r0-admin-whois-userid>_.

The deprecation of the old endpoints was announced with Synapse 1.20.0 (released on 2020-09-22) and makes it easier for homeserver admins to lock down external access to the Admin API endpoints.

Upgrading to v1.23.0

Structured logging configuration breaking changes

This release deprecates use of the structured: true logging configuration for structured logging. If your logging configuration contains structured: true then it should be modified based on the structured logging documentation <https://github.com/matrix-org/synapse/blob/master/docs/structured_logging.md>_.

The structured and drains logging options are now deprecated and should be replaced by standard logging configuration of handlers and formatters.

A future will release of Synapse will make using structured: true an error.

Upgrading to v1.22.0

ThirdPartyEventRules breaking changes

This release introduces a backwards-incompatible change to modules making use of ThirdPartyEventRules in Synapse. If you make use of a module defined under the third_party_event_rules config option, please make sure it is updated to handle the below change:

The http_client argument is no longer passed to modules as they are initialised. Instead, modules are expected to make use of the http_client property on the ModuleApi class. Modules are now passed a module_api argument during initialisation, which is an instance of ModuleApi. ModuleApi instances have a http_client property which acts the same as the http_client argument previously passed to ThirdPartyEventRules modules.

Upgrading to v1.21.0

Forwarding /_synapse/client through your reverse proxy

The reverse proxy documentation <https://github.com/matrix-org/synapse/blob/develop/docs/reverse_proxy.md>_ has been updated to include reverse proxy directives for /_synapse/client/* endpoints. As the user password reset flow now uses endpoints under this prefix, you must update your reverse proxy configurations for user password reset to work.

Additionally, note that the Synapse worker documentation <https://github.com/matrix-org/synapse/blob/develop/docs/workers.md>_ has been updated to state that the /_synapse/client/password_reset/email/submit_token endpoint can be handled by all workers. If you make use of Synapse's worker feature, please update your reverse proxy configuration to reflect this change.

New HTML templates

A new HTML template, password_reset_confirmation.html <https://github.com/matrix-org/synapse/blob/develop/synapse/res/templates/password_reset_confirmation.html>_, has been added to the synapse/res/templates directory. If you are using a custom template directory, you may want to copy the template over and modify it.

Note that as of v1.20.0, templates do not need to be included in custom template directories for Synapse to start. The default templates will be used if a custom template cannot be found.

This page will appear to the user after clicking a password reset link that has been emailed to them.

To complete password reset, the page must include a way to make a POST request to /_synapse/client/password_reset/{medium}/submit_token with the query parameters from the original link, presented as a URL-encoded form. See the file itself for more details.

Updated Single Sign-on HTML Templates

The saml_error.html template was removed from Synapse and replaced with the sso_error.html template. If your Synapse is configured to use SAML and a custom sso_redirect_confirm_template_dir configuration then any customisations of the saml_error.html template will need to be merged into the sso_error.html template. These templates are similar, but the parameters are slightly different:

  • The msg parameter should be renamed to error_description.
  • There is no longer a code parameter for the response code.
  • A string error parameter is available that includes a short hint of why a user is seeing the error page.

Upgrading to v1.18.0

Docker -py3 suffix will be removed in future versions

From 10th August 2020, we will no longer publish Docker images with the -py3 tag suffix. The images tagged with the -py3 suffix have been identical to the non-suffixed tags since release 0.99.0, and the suffix is obsolete.

On 10th August, we will remove the latest-py3 tag. Existing per-release tags (such as v1.18.0-py3) will not be removed, but no new -py3 tags will be added.

Scripts relying on the -py3 suffix will need to be updated.

When setting up worker processes, we now recommend the use of a Redis server for replication. The old direct TCP connection method is deprecated and will be removed in a future release. See docs/workers.md <docs/workers.md>_ for more details.

Upgrading to v1.14.0

This version includes a database update which is run as part of the upgrade, and which may take a couple of minutes in the case of a large server. Synapse will not respond to HTTP requests while this update is taking place.

Upgrading to v1.13.0

Incorrect database migration in old synapse versions

A bug was introduced in Synapse 1.4.0 which could cause the room directory to be incomplete or empty if Synapse was upgraded directly from v1.2.1 or earlier, to versions between v1.4.0 and v1.12.x.

This will not be a problem for Synapse installations which were:

  • created at v1.4.0 or later,
  • upgraded via v1.3.x, or
  • upgraded straight from v1.2.1 or earlier to v1.13.0 or later.

If completeness of the room directory is a concern, installations which are affected can be repaired as follows:

  1. Run the following sql from a psql or sqlite3 console:

    .. code:: sql

    INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES ('populate_stats_process_rooms', '{}', 'current_state_events_membership');

    INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES ('populate_stats_process_users', '{}', 'populate_stats_process_rooms');

  2. Restart synapse.

New Single Sign-on HTML Templates

New templates (sso_auth_confirm.html, sso_auth_success.html, and sso_account_deactivated.html) were added to Synapse. If your Synapse is configured to use SSO and a custom sso_redirect_confirm_template_dir configuration then these templates will need to be copied from synapse/res/templates <synapse/res/templates>_ into that directory.

Synapse SSO Plugins Method Deprecation

Plugins using the complete_sso_login method of synapse.module_api.ModuleApi should update to using the async/await version complete_sso_login_async which includes additional checks. The non-async version is considered deprecated.

Rolling back to v1.12.4 after a failed upgrade

v1.13.0 includes a lot of large changes. If something problematic occurs, you may want to roll-back to a previous version of Synapse. Because v1.13.0 also includes a new database schema version, reverting that version is also required alongside the generic rollback instructions mentioned above. In short, to roll back to v1.12.4 you need to:

  1. Stop the server

  2. Decrease the schema version in the database:

    .. code:: sql

    UPDATE schema_version SET version = 57;

  3. Downgrade Synapse by following the instructions for your installation method in the "Rolling back to older versions" section above.

Upgrading to v1.12.0

This version includes a database update which is run as part of the upgrade, and which may take some time (several hours in the case of a large server). Synapse will not respond to HTTP requests while this update is taking place.

This is only likely to be a problem in the case of a server which is participating in many rooms.

  1. As with all upgrades, it is recommended that you have a recent backup of your database which can be used for recovery in the event of any problems.

  2. As an initial check to see if you will be affected, you can try running the following query from the psql or sqlite3 console. It is safe to run it while Synapse is still running.

    .. code:: sql

    SELECT MAX(q.v) FROM ( SELECT ( SELECT ej.json AS v FROM state_events se INNER JOIN event_json ej USING (event_id) WHERE se.room_id=rooms.room_id AND se.type='m.room.create' AND se.state_key='' LIMIT 1 ) FROM rooms WHERE rooms.room_version IS NULL ) q;

    This query will take about the same amount of time as the upgrade process: ie, if it takes 5 minutes, then it is likely that Synapse will be unresponsive for 5 minutes during the upgrade.

    If you consider an outage of this duration to be acceptable, no further action is necessary and you can simply start Synapse 1.12.0.

    If you would prefer to reduce the downtime, continue with the steps below.

  3. The easiest workaround for this issue is to manually create a new index before upgrading. On PostgreSQL, his can be done as follows:

    .. code:: sql

    CREATE INDEX CONCURRENTLY tmp_upgrade_1_12_0_index ON state_events(room_id) WHERE type = 'm.room.create';

    The above query may take some time, but is also safe to run while Synapse is running.

    We assume that no SQLite users have databases large enough to be affected. If you are affected, you can run a similar query, omitting the CONCURRENTLY keyword. Note however that this operation may in itself cause Synapse to stop running for some time. Synapse admins are reminded that SQLite is not recommended for use outside a test environment <https://github.com/matrix-org/synapse/blob/master/README.rst#using-postgresql>_.

  4. Once the index has been created, the SELECT query in step 1 above should complete quickly. It is therefore safe to upgrade to Synapse 1.12.0.

  5. Once Synapse 1.12.0 has successfully started and is responding to HTTP requests, the temporary index can be removed:

    .. code:: sql

    DROP INDEX tmp_upgrade_1_12_0_index;

Upgrading to v1.10.0

Synapse will now log a warning on start up if used with a PostgreSQL database that has a non-recommended locale set.

See docs/postgres.md <docs/postgres.md>_ for details.

Upgrading to v1.8.0

Specifying a log_file config option will now cause Synapse to refuse to start, and should be replaced by with the log_config option. Support for the log_file option was removed in v1.3.0 and has since had no effect.

Upgrading to v1.7.0

In an attempt to configure Synapse in a privacy preserving way, the default behaviours of allow_public_rooms_without_auth and allow_public_rooms_over_federation have been inverted. This means that by default, only authenticated users querying the Client/Server API will be able to query the room directory, and relatedly that the server will not share room directory information with other servers over federation.

If your installation does not explicitly set these settings one way or the other and you want either setting to be true then it will necessary to update your homeserver configuration file accordingly.

For more details on the surrounding context see our explainer <https://matrix.org/blog/2019/11/09/avoiding-unwelcome-visitors-on-private-matrix-servers>_.

Upgrading to v1.5.0

This release includes a database migration which may take several minutes to complete if there are a large number (more than a million or so) of entries in the devices table. This is only likely to a be a problem on very large installations.

Upgrading to v1.4.0

New custom templates

If you have configured a custom template directory with the email.template_dir option, be aware that there are new templates regarding registration and threepid management (see below) that must be included.

  • registration.html and registration.txt
  • registration_success.html and registration_failure.html
  • add_threepid.html and add_threepid.txt
  • add_threepid_failure.html and add_threepid_success.html

Synapse will expect these files to exist inside the configured template directory, and will fail to start if they are absent. To view the default templates, see synapse/res/templates <https://github.com/matrix-org/synapse/tree/master/synapse/res/templates>_.

3pid verification changes

Note: As of this release, users will be unable to add phone numbers or email addresses to their accounts, without changes to the Synapse configuration. This includes adding an email address during registration.

It is possible for a user to associate an email address or phone number with their account, for a number of reasons:

  • for use when logging in, as an alternative to the user id.
  • in the case of email, as an alternative contact to help with account recovery.
  • in the case of email, to receive notifications of missed messages.

Before an email address or phone number can be added to a user's account, or before such an address is used to carry out a password-reset, Synapse must confirm the operation with the owner of the email address or phone number. It does this by sending an email or text giving the user a link or token to confirm receipt. This process is known as '3pid verification'. ('3pid', or 'threepid', stands for third-party identifier, and we use it to refer to external identifiers such as email addresses and phone numbers.)

Previous versions of Synapse delegated the task of 3pid verification to an identity server by default. In most cases this server is vector.im or matrix.org.

In Synapse 1.4.0, for security and privacy reasons, the homeserver will no longer delegate this task to an identity server by default. Instead, the server administrator will need to explicitly decide how they would like the verification messages to be sent.

In the medium term, the vector.im and matrix.org identity servers will disable support for delegated 3pid verification entirely. However, in order to ease the transition, they will retain the capability for a limited period. Delegated email verification will be disabled on Monday 2nd December 2019 (giving roughly 2 months notice). Disabling delegated SMS verification will follow some time after that once SMS verification support lands in Synapse.

Once delegated 3pid verification support has been disabled in the vector.im and matrix.org identity servers, all Synapse versions that depend on those instances will be unable to verify email and phone numbers through them. There are no imminent plans to remove delegated 3pid verification from Sydent generally. (Sydent is the identity server project that backs the vector.im and matrix.org instances).

Email

Following upgrade, to continue verifying email (e.g. as part of the
registration process), admins can either:-

* Configure Synapse to use an email server.
* Run or choose an identity server which allows delegated email verification
  and delegate to it.

Configure SMTP in Synapse
+++++++++++++++++++++++++

To configure an SMTP server for Synapse, modify the configuration section
headed ``email``, and be sure to have at least the ``smtp_host, smtp_port``
and ``notif_from`` fields filled out.

You may also need to set ``smtp_user``, ``smtp_pass``, and
``require_transport_security``.

See the `sample configuration file <docs/sample_config.yaml>`_ for more details
on these settings.

Delegate email to an identity server
++++++++++++++++++++++++++++++++++++

Some admins will wish to continue using email verification as part of the
registration process, but will not immediately have an appropriate SMTP server
at hand.

To this end, we will continue to support email verification delegation via the
``vector.im`` and ``matrix.org`` identity servers for two months. Support for
delegated email verification will be disabled on Monday 2nd December.

The ``account_threepid_delegates`` dictionary defines whether the homeserver
should delegate an external server (typically an `identity server
<https://matrix.org/docs/spec/identity_service/r0.2.1>`_) to handle sending
confirmation messages via email and SMS.

So to delegate email verification, in ``homeserver.yaml``, set
``account_threepid_delegates.email`` to the base URL of an identity server. For
example:

.. code:: yaml

   account_threepid_delegates:
       email: https://example.com     # Delegate email sending to example.com

Note that ``account_threepid_delegates.email`` replaces the deprecated
``email.trust_identity_server_for_password_resets``: if
``email.trust_identity_server_for_password_resets`` is set to ``true``, and
``account_threepid_delegates.email`` is not set, then the first entry in
``trusted_third_party_id_servers`` will be used as the
``account_threepid_delegate`` for email. This is to ensure compatibility with
existing Synapse installs that set up external server handling for these tasks
before v1.4.0. If ``email.trust_identity_server_for_password_resets`` is
``true`` and no trusted identity server domains are configured, Synapse will
report an error and refuse to start.

If ``email.trust_identity_server_for_password_resets`` is ``false`` or absent
and no ``email`` delegate is configured in ``account_threepid_delegates``,
then Synapse will send email verification messages itself, using the configured
SMTP server (see above).
that type.

Phone numbers

Synapse does not support phone-number verification itself, so the only way to maintain the ability for users to add phone numbers to their accounts will be by continuing to delegate phone number verification to the matrix.org and vector.im identity servers (or another identity server that supports SMS sending).

The account_threepid_delegates dictionary defines whether the homeserver should delegate an external server (typically an identity server <https://matrix.org/docs/spec/identity_service/r0.2.1>_) to handle sending confirmation messages via email and SMS.

So to delegate phone number verification, in homeserver.yaml, set account_threepid_delegates.msisdn to the base URL of an identity server. For example:

.. code:: yaml

account_threepid_delegates: msisdn: https://example.com # Delegate sms sending to example.com

The matrix.org and vector.im identity servers will continue to support delegated phone number verification via SMS until such time as it is possible for admins to configure their servers to perform phone number verification directly. More details will follow in a future release.

Rolling back to v1.3.1

If you encounter problems with v1.4.0, it should be possible to roll back to v1.3.1, subject to the following:

  • The 'room statistics' engine was heavily reworked in this release (see #5971 <https://github.com/matrix-org/synapse/pull/5971>_), including significant changes to the database schema, which are not easily reverted. This will cause the room statistics engine to stop updating when you downgrade.

    The room statistics are essentially unused in v1.3.1 (in future versions of Synapse, they will be used to populate the room directory), so there should be no loss of functionality. However, the statistics engine will write errors to the logs, which can be avoided by setting the following in homeserver.yaml:

    .. code:: yaml

    stats: enabled: false

    Don't forget to re-enable it when you upgrade again, in preparation for its use in the room directory!

Upgrading to v1.2.0

Some counter metrics have been renamed, with the old names deprecated. See the metrics documentation <docs/metrics-howto.md#renaming-of-metrics--deprecation-of-old-names-in-12>_ for details.

Upgrading to v1.1.0

Synapse v1.1.0 removes support for older Python and PostgreSQL versions, as outlined in our deprecation notice <https://matrix.org/blog/2019/04/08/synapse-deprecating-postgres-9-4-and-python-2-x>_.

Minimum Python Version

Synapse v1.1.0 has a minimum Python requirement of Python 3.5. Python 3.6 or Python 3.7 are recommended as they have improved internal string handling, significantly reducing memory usage.

If you use current versions of the Matrix.org-distributed Debian packages or Docker images, action is not required.

If you install Synapse in a Python virtual environment, please see "Upgrading to v0.34.0" for notes on setting up a new virtualenv under Python 3.

Minimum PostgreSQL Version

If using PostgreSQL under Synapse, you will need to use PostgreSQL 9.5 or above. Please see the PostgreSQL documentation <https://www.postgresql.org/docs/11/upgrading.html>_ for more details on upgrading your database.

Upgrading to v1.0

Validation of TLS certificates

Synapse v1.0 is the first release to enforce validation of TLS certificates for the federation API. It is therefore essential that your certificates are correctly configured. See the FAQ <docs/MSC1711_certificates_FAQ.md>_ for more information.

Note, v1.0 installations will also no longer be able to federate with servers that have not correctly configured their certificates.

In rare cases, it may be desirable to disable certificate checking: for example, it might be essential to be able to federate with a given legacy server in a closed federation. This can be done in one of two ways:-

  • Configure the global switch federation_verify_certificates to false.
  • Configure a whitelist of server domains to trust via federation_certificate_verification_whitelist.

See the sample configuration file <docs/sample_config.yaml>_ for more details on these settings.

Email

When a user requests a password reset, Synapse will send an email to the user to confirm the request.

Previous versions of Synapse delegated the job of sending this email to an identity server. If the identity server was somehow malicious or became compromised, it would be theoretically possible to hijack an account through this means.

Therefore, by default, Synapse v1.0 will send the confirmation email itself. If Synapse is not configured with an SMTP server, password reset via email will be disabled.

To configure an SMTP server for Synapse, modify the configuration section headed email, and be sure to have at least the smtp_host, smtp_port and notif_from fields filled out. You may also need to set smtp_user, smtp_pass, and require_transport_security.

If you are absolutely certain that you wish to continue using an identity server for password resets, set trust_identity_server_for_password_resets to true.

See the sample configuration file <docs/sample_config.yaml>_ for more details on these settings.

New email templates

Some new templates have been added to the default template directory for the purpose of the homeserver sending its own password reset emails. If you have configured a custom template_dir in your Synapse config, these files will need to be added.

password_reset.html and password_reset.txt are HTML and plain text templates respectively that contain the contents of what will be emailed to the user upon attempting to reset their password via email. password_reset_success.html and password_reset_failure.html are HTML files that the content of which (assuming no redirect URL is set) will be shown to the user after they attempt to click the link in the email sent to them.

Upgrading to v0.99.0

Please be aware that, before Synapse v1.0 is released around March 2019, you will need to replace any self-signed certificates with those verified by a root CA. Information on how to do so can be found at the ACME docs <docs/ACME.md>_.

For more information on configuring TLS certificates see the FAQ <docs/MSC1711_certificates_FAQ.md>_.

Upgrading to v0.34.0

  1. This release is the first to fully support Python 3. Synapse will now run on Python versions 3.5, or 3.6 (as well as 2.7). We recommend switching to Python 3, as it has been shown to give performance improvements.

    For users who have installed Synapse into a virtualenv, we recommend doing this by creating a new virtualenv. For example::

    virtualenv -p python3 ~/synapse/env3
source ~/synapse/env3/bin/activate
pip install matrix-synapse

    You can then start synapse as normal, having activated the new virtualenv::

    cd ~/synapse
source env3/bin/activate
synctl start

    Users who have installed from distribution packages should see the relevant package documentation. See below for notes on Debian packages.

    • When upgrading to Python 3, you must make sure that your log files are configured as UTF-8, by adding encoding: utf8 to the RotatingFileHandler configuration (if you have one) in your <server>.log.config file. For example, if your log.config file contains::

      handlers: file: class: logging.handlers.RotatingFileHandler formatter: precise filename: homeserver.log maxBytes: 104857600 backupCount: 10 filters: [context] console: class: logging.StreamHandler formatter: precise filters: [context]

      Then you should update this to be::

      handlers: file: class: logging.handlers.RotatingFileHandler formatter: precise filename: homeserver.log maxBytes: 104857600 backupCount: 10 filters: [context] encoding: utf8 console: class: logging.StreamHandler formatter: precise filters: [context]

      There is no need to revert this change if downgrading to Python 2.

    We are also making available Debian packages which will run Synapse on Python 3. You can switch to these packages with apt-get install matrix-synapse-py3, however, please read debian/NEWS <https://github.com/matrix-org/synapse/blob/release-v0.34.0/debian/NEWS>_ before doing so. The existing matrix-synapse packages will continue to use Python 2 for the time being.

  2. This release removes the riot.im from the default list of trusted identity servers.

    If riot.im is in your homeserver's list of trusted_third_party_id_servers, you should remove it. It was added in case a hypothetical future identity server was put there. If you don't remove it, users may be unable to deactivate their accounts.

  3. This release no longer installs the (unmaintained) Matrix Console web client as part of the default installation. It is possible to re-enable it by installing it separately and setting the web_client_location config option, but please consider switching to another client.

Upgrading to v0.33.7

This release removes the example email notification templates from res/templates (they are now internal to the python package). This should only affect you if you (a) deploy your Synapse instance from a git checkout or a github snapshot URL, and (b) have email notifications enabled.

If you have email notifications enabled, you should ensure that email.template_dir is either configured to point at a directory where you have installed customised templates, or leave it unset to use the default templates.

Upgrading to v0.27.3

This release expands the anonymous usage stats sent if the opt-in report_stats configuration is set to true. We now capture RSS memory and cpu use at a very coarse level. This requires administrators to install the optional psutil python module.

We would appreciate it if you could assist by ensuring this module is available and report_stats is enabled. This will let us see if performance changes to synapse are having an impact to the general community.

Upgrading to v0.15.0

If you want to use the new URL previewing API (/_matrix/media/r0/preview_url) then you have to explicitly enable it in the config and update your dependencies dependencies. See README.rst for details.

Upgrading to v0.11.0

This release includes the option to send anonymous usage stats to matrix.org, and requires that administrators explictly opt in or out by setting the report_stats option to either true or false.

We would really appreciate it if you could help our project out by reporting anonymized usage statistics from your homeserver. Only very basic aggregate data (e.g. number of users) will be reported, but it helps us to track the growth of the Matrix community, and helps us to make Matrix a success, as well as to convince other networks that they should peer with us.

Upgrading to v0.9.0

Application services have had a breaking API change in this version.

They can no longer register themselves with a home server using the AS HTTP API. This decision was made because a compromised application service with free reign to register any regex in effect grants full read/write access to the home server if a regex of .* is used. An attack where a compromised AS re-registers itself with .* was deemed too big of a security risk to ignore, and so the ability to register with the HS remotely has been removed.

It has been replaced by specifying a list of application service registrations in homeserver.yaml::

app_service_config_files: ["registration-01.yaml", "registration-02.yaml"]

Where registration-01.yaml looks like::

url: # e.g. "https://my.application.service.com" as_token: hs_token: sender_localpart: # This is a new field which denotes the user_id localpart when using the AS token namespaces: users: - exclusive: regex: # e.g. "@prefix_.*" aliases: - exclusive: regex: rooms: - exclusive: regex:

Upgrading to v0.8.0

Servers which use captchas will need to add their public key to::

static/client/register/register_config.js

window.matrixRegistrationConfig = {
    recaptcha_public_key: "YOUR_PUBLIC_KEY"
};

This is required in order to support registration fallback (typically used on mobile devices).

Upgrading to v0.7.0

New dependencies are:

  • pydenticon
  • simplejson
  • syutil
  • matrix-angular-sdk

To pull in these dependencies in a virtual env, run::

python synapse/python_dependencies.py | xargs -n 1 pip install

Upgrading to v0.6.0

To pull in new dependencies, run::

python setup.py develop --user

This update includes a change to the database schema. To upgrade you first need to upgrade the database by running::

python scripts/upgrade_db_to_v0.6.0.py <db> <server_name> <signing_key>

Where <db> is the location of the database, <server_name> is the server name as specified in the synapse configuration, and <signing_key> is the location of the signing key as specified in the synapse configuration.

This may take some time to complete. Failures of signatures and content hashes can safely be ignored.

Upgrading to v0.5.1

Depending on precisely when you installed v0.5.0 you may have ended up with a stale release of the reference matrix webclient installed as a python module. To uninstall it and ensure you are depending on the latest module, please run::

$ pip uninstall syweb

Upgrading to v0.5.0

The webclient has been split out into a seperate repository/pacakage in this release. Before you restart your homeserver you will need to pull in the webclient package by running::

python setup.py develop --user

This release completely changes the database schema and so requires upgrading it before starting the new version of the homeserver.

The script "database-prepare-for-0.5.0.sh" should be used to upgrade the database. This will save all user information, such as logins and profiles, but will otherwise purge the database. This includes messages, which rooms the home server was a member of and room alias mappings.

If you would like to keep your history, please take a copy of your database file and ask for help in #matrix:matrix.org. The upgrade process is, unfortunately, non trivial and requires human intervention to resolve any resulting conflicts during the upgrade process.

Before running the command the homeserver should be first completely shutdown. To run it, simply specify the location of the database, e.g.:

./scripts/database-prepare-for-0.5.0.sh "homeserver.db"

Once this has successfully completed it will be safe to restart the homeserver. You may notice that the homeserver takes a few seconds longer to restart than usual as it reinitializes the database.

On startup of the new version, users can either rejoin remote rooms using room aliases or by being reinvited. Alternatively, if any other homeserver sends a message to a room that the homeserver was previously in the local HS will automatically rejoin the room.

Upgrading to v0.4.0

This release needs an updated syutil version. Run::

python setup.py develop

You will also need to upgrade your configuration as the signing key format has changed. Run::

python -m synapse.app.homeserver --config-path <CONFIG> --generate-config

Upgrading to v0.3.0

This registration API now closely matches the login API. This introduces a bit more backwards and forwards between the HS and the client, but this improves the overall flexibility of the API. You can now GET on /register to retrieve a list of valid registration flows. Upon choosing one, they are submitted in the same way as login, e.g::

{ type: m.login.password, user: foo, password: bar }

The default HS supports 2 flows, with and without Identity Server email authentication. Enabling captcha on the HS will add in an extra step to all flows: m.login.recaptcha which must be completed before you can transition to the next stage. There is a new login type: m.login.email.identity which contains the threepidCreds key which were previously sent in the original register request. For more information on this, see the specification.

Web Client

The VoIP specification has changed between v0.2.0 and v0.3.0. Users should refresh any browser tabs to get the latest web client code. Users on v0.2.0 of the web client will not be able to call those on v0.3.0 and vice versa.

Upgrading to v0.2.0

The home server now requires setting up of SSL config before it can run. To automatically generate default config use::

$ python synapse/app/homeserver.py \
    --server-name machine.my.domain.name \
    --bind-port 8448 \
    --config-path homeserver.config \
    --generate-config

This config can be edited if desired, for example to specify a different SSL certificate to use. Once done you can run the home server using::

$ python synapse/app/homeserver.py --config-path homeserver.config

See the README.rst for more information.

Also note that some config options have been renamed, including:

  • "host" to "server-name"
  • "database" to "database-path"
  • "port" to "bind-port" and "unsecure-port"

Upgrading to v0.0.1

This release completely changes the database schema and so requires upgrading it before starting the new version of the homeserver.

The script "database-prepare-for-0.0.1.sh" should be used to upgrade the database. This will save all user information, such as logins and profiles, but will otherwise purge the database. This includes messages, which rooms the home server was a member of and room alias mappings.

Before running the command the homeserver should be first completely shutdown. To run it, simply specify the location of the database, e.g.:

./scripts/database-prepare-for-0.0.1.sh "homeserver.db"

Once this has successfully completed it will be safe to restart the homeserver. You may notice that the homeserver takes a few seconds longer to restart than usual as it reinitializes the database.

On startup of the new version, users can either rejoin remote rooms using room aliases or by being reinvited. Alternatively, if any other homeserver sends a message to a room that the homeserver was previously in the local HS will automatically rejoin the room.

MSC1711 Certificates FAQ

Historical Note

This document was originally written to guide server admins through the upgrade path towards Synapse 1.0. Specifically, MSC1711 required that all servers present valid TLS certificates on their federation API. Admins were encouraged to achieve compliance from version 0.99.0 (released in February 2019) ahead of version 1.0 (released June 2019) enforcing the certificate checks.

Much of what follows is now outdated since most admins will have already upgraded, however it may be of use to those with old installs returning to the project.

If you are setting up a server from scratch you almost certainly should look at the installation guide instead.

Introduction

The goal of Synapse 0.99.0 is to act as a stepping stone to Synapse 1.0.0. It supports the r0.1 release of the server to server specification, but is compatible with both the legacy Matrix federation behaviour (pre-r0.1) as well as post-r0.1 behaviour, in order to allow for a smooth upgrade across the federation.

The most important thing to know is that Synapse 1.0.0 will require a valid TLS certificate on federation endpoints. Self signed certificates will not be sufficient.

Synapse 0.99.0 makes it easy to configure TLS certificates and will interoperate with both >= 1.0.0 servers as well as existing servers yet to upgrade.

It is critical that all admins upgrade to 0.99.0 and configure a valid TLS certificate. Admins will have 1 month to do so, after which 1.0.0 will be released and those servers without a valid certificate will not longer be able to federate with >= 1.0.0 servers.

Full details on how to carry out this configuration change is given below. A timeline and some frequently asked questions are also given below.

For more details and context on the release of the r0.1 Server/Server API and imminent Matrix 1.0 release, you can also see our main talk from FOSDEM 2019.

Contents

  • Timeline
  • Configuring certificates for compatibility with Synapse 1.0
  • FAQ
    • Synapse 0.99.0 has just been released, what do I need to do right now?
    • How do I upgrade?
    • What will happen if I do not set up a valid federation certificate immediately?
    • What will happen if I do nothing at all?
    • When do I need a SRV record or .well-known URI?
    • Can I still use an SRV record?
    • I have created a .well-known URI. Do I still need an SRV record?
    • It used to work just fine, why are you breaking everything?
    • Can I manage my own certificates rather than having Synapse renew certificates itself?
    • Do you still recommend against using a reverse proxy on the federation port?
    • Do I still need to give my TLS certificates to Synapse if I am using a reverse proxy?
    • Do I need the same certificate for the client and federation port?
    • How do I tell Synapse to reload my keys/certificates after I replace them?

Timeline

5th Feb 2019 - Synapse 0.99.0 is released.

All server admins are encouraged to upgrade.

0.99.0:

  • provides support for ACME to make setting up Let's Encrypt certs easy, as well as .well-known support.

  • does not enforce that a valid CA cert is present on the federation API, but rather makes it easy to set one up.

  • provides support for .well-known

Admins should upgrade and configure a valid CA cert. Homeservers that require a .well-known entry (see below), should retain their SRV record and use it alongside their .well-known record.

10th June 2019 - Synapse 1.0.0 is released

1.0.0 is scheduled for release on 10th June. In accordance with the the S2S spec 1.0.0 will enforce certificate validity. This means that any homeserver without a valid certificate after this point will no longer be able to federate with 1.0.0 servers.

Configuring certificates for compatibility with Synapse 1.0.0

If you do not currently have an SRV record

In this case, your server_name points to the host where your Synapse is running. There is no need to create a .well-known URI or an SRV record, but you will need to give Synapse a valid, signed, certificate.

If you do have an SRV record currently

If you are using an SRV record, your matrix domain (server_name) may not point to the same host that your Synapse is running on (the 'target domain'). (If it does, you can follow the recommendation above; otherwise, read on.)

Let's assume that your server_name is example.com, and your Synapse is hosted at a target domain of customer.example.net. Currently you should have an SRV record which looks like:

_matrix._tcp.example.com. IN SRV 10 5 8000 customer.example.net.

In this situation, you have three choices for how to proceed:

Option 1: give Synapse a certificate for your matrix domain

Synapse 1.0 will expect your server to present a TLS certificate for your server_name (example.com in the above example). You can achieve this by acquiring a certificate for the server_name yourself (for example, using certbot), and giving it and the key to Synapse via tls_certificate_path and tls_private_key_path.

Option 2: run Synapse behind a reverse proxy

If you have an existing reverse proxy set up with correct TLS certificates for your domain, you can simply route all traffic through the reverse proxy by updating the SRV record appropriately (or removing it, if the proxy listens on 8448).

See reverse_proxy.md for information on setting up a reverse proxy.

Option 3: add a .well-known file to delegate your matrix traffic

This will allow you to keep Synapse on a separate domain, without having to give it a certificate for the matrix domain.

You can do this with a .well-known file as follows:

  1. Keep the SRV record in place - it is needed for backwards compatibility with Synapse 0.34 and earlier.

  2. Give Synapse a certificate corresponding to the target domain (customer.example.net in the above example). You can do this by acquire a certificate for the target domain and giving it to Synapse via tls_certificate_path and tls_private_key_path.

  3. Restart Synapse to ensure the new certificate is loaded.

  4. Arrange for a .well-known file at https://<server_name>/.well-known/matrix/server with contents:

    {"m.server": "<target server name>"}

    where the target server name is resolved as usual (i.e. SRV lookup, falling back to talking to port 8448).

    In the above example, where synapse is listening on port 8000, https://example.com/.well-known/matrix/server should have m.server set to one of:

    1. customer.example.net ─ with a SRV record on _matrix._tcp.customer.example.com pointing to port 8000, or:

    2. customer.example.net ─ updating synapse to listen on the default port 8448, or:

    3. customer.example.net:8000 ─ ensuring that if there is a reverse proxy on customer.example.net:8000 it correctly handles HTTP requests with Host header set to customer.example.net:8000.

FAQ

Synapse 0.99.0 has just been released, what do I need to do right now?

Upgrade as soon as you can in preparation for Synapse 1.0.0, and update your TLS certificates as above.

What will happen if I do not set up a valid federation certificate immediately?

Nothing initially, but once 1.0.0 is in the wild it will not be possible to federate with 1.0.0 servers.

What will happen if I do nothing at all?

If the admin takes no action at all, and remains on a Synapse < 0.99.0 then the homeserver will be unable to federate with those who have implemented .well-known. Then, as above, once the month upgrade window has expired the homeserver will not be able to federate with any Synapse >= 1.0.0

When do I need a SRV record or .well-known URI?

If your homeserver listens on the default federation port (8448), and your server_name points to the host that your homeserver runs on, you do not need an SRV record or .well-known/matrix/server URI.

For instance, if you registered example.com and pointed its DNS A record at a fresh Upcloud VPS or similar, you could install Synapse 0.99 on that host, giving it a server_name of example.com, and it would automatically generate a valid TLS certificate for you via Let's Encrypt and no SRV record or .well-known URI would be needed.

This is the common case, although you can add an SRV record or .well-known/matrix/server URI for completeness if you wish.

However, if your server does not listen on port 8448, or if your server_name does not point to the host that your homeserver runs on, you will need to let other servers know how to find it.

In this case, you should see "If you do have an SRV record currently" above.

Can I still use an SRV record?

Firstly, if you didn't need an SRV record before (because your server is listening on port 8448 of your server_name), you certainly don't need one now: the defaults are still the same.

If you previously had an SRV record, you can keep using it provided you are able to give Synapse a TLS certificate corresponding to your server name. For example, suppose you had the following SRV record, which directs matrix traffic for example.com to matrix.example.com:443:

_matrix._tcp.example.com. IN SRV 10 5 443 matrix.example.com

In this case, Synapse must be given a certificate for example.com - or be configured to acquire one from Let's Encrypt.

If you are unable to give Synapse a certificate for your server_name, you will also need to use a .well-known URI instead. However, see also "I have created a .well-known URI. Do I still need an SRV record?".

I have created a .well-known URI. Do I still need an SRV record?

As of Synapse 0.99, Synapse will first check for the existence of a .well-known URI and follow any delegation it suggests. It will only then check for the existence of an SRV record.

That means that the SRV record will often be redundant. However, you should remember that there may still be older versions of Synapse in the federation which do not understand .well-known URIs, so if you removed your SRV record you would no longer be able to federate with them.

It is therefore best to leave the SRV record in place for now. Synapse 0.34 and earlier will follow the SRV record (and not care about the invalid certificate). Synapse 0.99 and later will follow the .well-known URI, with the correct certificate chain.

It used to work just fine, why are you breaking everything?

We have always wanted Matrix servers to be as easy to set up as possible, and so back when we started federation in 2014 we didn't want admins to have to go through the cumbersome process of buying a valid TLS certificate to run a server. This was before Let's Encrypt came along and made getting a free and valid TLS certificate straightforward. So instead, we adopted a system based on Perspectives: an approach where you check a set of "notary servers" (in practice, homeservers) to vouch for the validity of a certificate rather than having it signed by a CA. As long as enough different notaries agree on the certificate's validity, then it is trusted.

However, in practice this has never worked properly. Most people only use the default notary server (matrix.org), leading to inadvertent centralisation which we want to eliminate. Meanwhile, we never implemented the full consensus algorithm to query the servers participating in a room to determine consensus on whether a given certificate is valid. This is fiddly to get right (especially in face of sybil attacks), and we found ourselves questioning whether it was worth the effort to finish the work and commit to maintaining a secure certificate validation system as opposed to focusing on core Matrix development.

Meanwhile, Let's Encrypt came along in 2016, and put the final nail in the coffin of the Perspectives project (which was already pretty dead). So, the Spec Core Team decided that a better approach would be to mandate valid TLS certificates for federation alongside the rest of the Web. More details can be found in MSC1711.

This results in a breaking change, which is disruptive, but absolutely critical for the security model. However, the existence of Let's Encrypt as a trivial way to replace the old self-signed certificates with valid CA-signed ones helps smooth things over massively, especially as Synapse can now automate Let's Encrypt certificate generation if needed.

Can I manage my own certificates rather than having Synapse renew certificates itself?

Yes, you are welcome to manage your certificates yourself. Synapse will only attempt to obtain certificates from Let's Encrypt if you configure it to do so.The only requirement is that there is a valid TLS cert present for federation end points.

Do you still recommend against using a reverse proxy on the federation port?

We no longer actively recommend against using a reverse proxy. Many admins will find it easier to direct federation traffic to a reverse proxy and manage their own TLS certificates, and this is a supported configuration.

See reverse_proxy.md for information on setting up a reverse proxy.

Do I still need to give my TLS certificates to Synapse if I am using a reverse proxy?

Practically speaking, this is no longer necessary.

If you are using a reverse proxy for all of your TLS traffic, then you can set no_tls: True. In that case, the only reason Synapse needs the certificate is to populate a legacy 'tls_fingerprints' field in the federation API. This is ignored by Synapse 0.99.0 and later, and the only time pre-0.99 Synapses will check it is when attempting to fetch the server keys - and generally this is delegated via matrix.org, which is on 0.99.0.

However, there is a bug in Synapse 0.99.0 4554 which prevents Synapse from starting if you do not give it a TLS certificate. To work around this, you can give it any TLS certificate at all. This will be fixed soon.

Do I need the same certificate for the client and federation port?

No. There is nothing stopping you from using different certificates, particularly if you are using a reverse proxy. However, Synapse will use the same certificate on any ports where TLS is configured.

How do I tell Synapse to reload my keys/certificates after I replace them?

Synapse will reload the keys and certificates when it receives a SIGHUP - for example kill -HUP $(cat homeserver.pid). Alternatively, simply restart Synapse, though this will result in downtime while it restarts.

Setting up federation

Federation is the process by which users on different servers can participate in the same room. For this to work, those other servers must be able to contact yours to send messages.

The server_name configured in the Synapse configuration file (often homeserver.yaml) defines how resources (users, rooms, etc.) will be identified (eg: @user:example.com, #room:example.com). By default, it is also the domain that other servers will use to try to reach your server (via port 8448). This is easy to set up and will work provided you set the server_name to match your machine's public DNS hostname.

For this default configuration to work, you will need to listen for TLS connections on port 8448. The preferred way to do that is by using a reverse proxy: see reverse_proxy.md for instructions on how to correctly set one up.

In some cases you might not want to run Synapse on the machine that has the server_name as its public DNS hostname, or you might want federation traffic to use a different port than 8448. For example, you might want to have your user names look like @user:example.com, but you want to run Synapse on synapse.example.com on port 443. This can be done using delegation, which allows an admin to control where federation traffic should be sent. See delegate.md for instructions on how to set this up.

Once federation has been configured, you should be able to join a room over federation. A good place to start is #synapse:matrix.org - a room for Synapse admins.

Troubleshooting

You can use the federation tester to check if your homeserver is configured correctly. Alternatively try the JSON API used by the federation tester. Note that you'll have to modify this URL to replace DOMAIN with your server_name. Hitting the API directly provides extra detail.

The typical failure mode for federation is that when the server tries to join a room, it is rejected with "401: Unauthorized". Generally this means that other servers in the room could not access yours. (Joining a room over federation is a complicated dance which requires connections in both directions).

Another common problem is that people on other servers can't join rooms that you invite them to. This can be caused by an incorrectly-configured reverse proxy: see reverse_proxy.md for instructions on how to correctly configure a reverse proxy.

Known issues

HTTP 308 Permanent Redirect redirects are not followed: Due to missing features in the HTTP library used by Synapse, 308 redirects are currently not followed by federating servers, which can cause M_UNKNOWN or 401 Unauthorized errors. This may affect users who are redirecting apex-to-www (e.g. example.com -> www.example.com), and especially users of the Kubernetes Nginx Ingress module, which uses 308 redirect codes by default. For those Kubernetes users, this Stackoverflow post might be helpful. For other users, switching to a 301 Moved Permanently code may be an option. 308 redirect codes will be supported properly in a future release of Synapse.

Running a demo federation of Synapses

If you want to get up and running quickly with a trio of homeservers in a private federation, there is a script in the demo directory. This is mainly useful just for development purposes. See demo/README.

Configuration

This section contains information on tweaking Synapse via the various options in the configuration file. A configuration file should have been generated when you installed Synapse.

Homeserver Sample Configuration File

Below is a sample homeserver configuration file. The homeserver configuration file can be tweaked to change the behaviour of your homeserver. A restart of the server is generally required to apply any changes made to this file.

Note that the contents below are not intended to be copied and used as the basis for a real homeserver.yaml. Instead, if you are starting from scratch, please generate a fresh config using Synapse by following the instructions in Installation.

# This file is maintained as an up-to-date snapshot of the default
# homeserver.yaml configuration generated by Synapse.
#
# It is intended to act as a reference for the default configuration,
# helping admins keep track of new options and other changes, and compare
# their configs with the current default.  As such, many of the actual
# config values shown are placeholders.
#
# It is *not* intended to be copied and used as the basis for a real
# homeserver.yaml. Instead, if you are starting from scratch, please generate
# a fresh config using Synapse by following the instructions in INSTALL.md.

# Configuration options that take a time period can be set using a number
# followed by a letter. Letters have the following meanings:
# s = second
# m = minute
# h = hour
# d = day
# w = week
# y = year
# For example, setting redaction_retention_period: 5m would remove redacted
# messages from the database after 5 minutes, rather than 5 months.

################################################################################

# Configuration file for Synapse.
#
# This is a YAML file: see [1] for a quick introduction. Note in particular
# that *indentation is important*: all the elements of a list or dictionary
# should have the same indentation.
#
# [1] https://docs.ansible.com/ansible/latest/reference_appendices/YAMLSyntax.html


## Modules ##

# Server admins can expand Synapse's functionality with external modules.
#
# See https://matrix-org.github.io/synapse/develop/modules.html for more
# documentation on how to configure or create custom modules for Synapse.
#
modules:
    # - module: my_super_module.MySuperClass
    #   config:
    #       do_thing: true
    # - module: my_other_super_module.SomeClass
    #   config: {}


## Server ##

# The public-facing domain of the server
#
# The server_name name will appear at the end of usernames and room addresses
# created on this server. For example if the server_name was example.com,
# usernames on this server would be in the format @user:example.com
#
# In most cases you should avoid using a matrix specific subdomain such as
# matrix.example.com or synapse.example.com as the server_name for the same
# reasons you wouldn't use user@email.example.com as your email address.
# See https://github.com/matrix-org/synapse/blob/master/docs/delegate.md
# for information on how to host Synapse on a subdomain while preserving
# a clean server_name.
#
# The server_name cannot be changed later so it is important to
# configure this correctly before you start Synapse. It should be all
# lowercase and may contain an explicit port.
# Examples: matrix.org, localhost:8080
#
server_name: "SERVERNAME"

# When running as a daemon, the file to store the pid in
#
pid_file: DATADIR/homeserver.pid

# The absolute URL to the web client which /_matrix/client will redirect
# to if 'webclient' is configured under the 'listeners' configuration.
#
# This option can be also set to the filesystem path to the web client
# which will be served at /_matrix/client/ if 'webclient' is configured
# under the 'listeners' configuration, however this is a security risk:
# https://github.com/matrix-org/synapse#security-note
#
#web_client_location: https://riot.example.com/

# The public-facing base URL that clients use to access this Homeserver (not
# including _matrix/...). This is the same URL a user might enter into the
# 'Custom Homeserver URL' field on their client. If you use Synapse with a
# reverse proxy, this should be the URL to reach Synapse via the proxy.
# Otherwise, it should be the URL to reach Synapse's client HTTP listener (see
# 'listeners' below).
#
#public_baseurl: https://example.com/

# Set the soft limit on the number of file descriptors synapse can use
# Zero is used to indicate synapse should set the soft limit to the
# hard limit.
#
#soft_file_limit: 0

# Presence tracking allows users to see the state (e.g online/offline)
# of other local and remote users.
#
presence:
  # Uncomment to disable presence tracking on this homeserver. This option
  # replaces the previous top-level 'use_presence' option.
  #
  #enabled: false

  # Presence routers are third-party modules that can specify additional logic
  # to where presence updates from users are routed.
  #
  presence_router:
    # The custom module's class. Uncomment to use a custom presence router module.
    #
    #module: "my_custom_router.PresenceRouter"

    # Configuration options of the custom module. Refer to your module's
    # documentation for available options.
    #
    #config:
    #  example_option: 'something'

# Whether to require authentication to retrieve profile data (avatars,
# display names) of other users through the client API. Defaults to
# 'false'. Note that profile data is also available via the federation
# API, unless allow_profile_lookup_over_federation is set to false.
#
#require_auth_for_profile_requests: true

# Uncomment to require a user to share a room with another user in order
# to retrieve their profile information. Only checked on Client-Server
# requests. Profile requests from other servers should be checked by the
# requesting server. Defaults to 'false'.
#
#limit_profile_requests_to_users_who_share_rooms: true

# Uncomment to prevent a user's profile data from being retrieved and
# displayed in a room until they have joined it. By default, a user's
# profile data is included in an invite event, regardless of the values
# of the above two settings, and whether or not the users share a server.
# Defaults to 'true'.
#
#include_profile_data_on_invite: false

# If set to 'true', removes the need for authentication to access the server's
# public rooms directory through the client API, meaning that anyone can
# query the room directory. Defaults to 'false'.
#
#allow_public_rooms_without_auth: true

# If set to 'true', allows any other homeserver to fetch the server's public
# rooms directory via federation. Defaults to 'false'.
#
#allow_public_rooms_over_federation: true

# The default room version for newly created rooms.
#
# Known room versions are listed here:
# https://matrix.org/docs/spec/#complete-list-of-room-versions
#
# For example, for room version 1, default_room_version should be set
# to "1".
#
#default_room_version: "6"

# The GC threshold parameters to pass to `gc.set_threshold`, if defined
#
#gc_thresholds: [700, 10, 10]

# The minimum time in seconds between each GC for a generation, regardless of
# the GC thresholds. This ensures that we don't do GC too frequently.
#
# A value of `[1s, 10s, 30s]` indicates that a second must pass between consecutive
# generation 0 GCs, etc.
#
# Defaults to `[1s, 10s, 30s]`.
#
#gc_min_interval: [0.5s, 30s, 1m]

# Set the limit on the returned events in the timeline in the get
# and sync operations. The default value is 100. -1 means no upper limit.
#
# Uncomment the following to increase the limit to 5000.
#
#filter_timeline_limit: 5000

# Whether room invites to users on this server should be blocked
# (except those sent by local server admins). The default is False.
#
#block_non_admin_invites: true

# Room searching
#
# If disabled, new messages will not be indexed for searching and users
# will receive errors when searching for messages. Defaults to enabled.
#
#enable_search: false

# Prevent outgoing requests from being sent to the following blacklisted IP address
# CIDR ranges. If this option is not specified then it defaults to private IP
# address ranges (see the example below).
#
# The blacklist applies to the outbound requests for federation, identity servers,
# push servers, and for checking key validity for third-party invite events.
#
# (0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
# listed here, since they correspond to unroutable addresses.)
#
# This option replaces federation_ip_range_blacklist in Synapse v1.25.0.
#
#ip_range_blacklist:
#  - '127.0.0.0/8'
#  - '10.0.0.0/8'
#  - '172.16.0.0/12'
#  - '192.168.0.0/16'
#  - '100.64.0.0/10'
#  - '192.0.0.0/24'
#  - '169.254.0.0/16'
#  - '192.88.99.0/24'
#  - '198.18.0.0/15'
#  - '192.0.2.0/24'
#  - '198.51.100.0/24'
#  - '203.0.113.0/24'
#  - '224.0.0.0/4'
#  - '::1/128'
#  - 'fe80::/10'
#  - 'fc00::/7'
#  - '2001:db8::/32'
#  - 'ff00::/8'
#  - 'fec0::/10'

# List of IP address CIDR ranges that should be allowed for federation,
# identity servers, push servers, and for checking key validity for
# third-party invite events. This is useful for specifying exceptions to
# wide-ranging blacklisted target IP ranges - e.g. for communication with
# a push server only visible in your network.
#
# This whitelist overrides ip_range_blacklist and defaults to an empty
# list.
#
#ip_range_whitelist:
#   - '192.168.1.1'

# List of ports that Synapse should listen on, their purpose and their
# configuration.
#
# Options for each listener include:
#
#   port: the TCP port to bind to
#
#   bind_addresses: a list of local addresses to listen on. The default is
#       'all local interfaces'.
#
#   type: the type of listener. Normally 'http', but other valid options are:
#       'manhole' (see docs/manhole.md),
#       'metrics' (see docs/metrics-howto.md),
#       'replication' (see docs/workers.md).
#
#   tls: set to true to enable TLS for this listener. Will use the TLS
#       key/cert specified in tls_private_key_path / tls_certificate_path.
#
#   x_forwarded: Only valid for an 'http' listener. Set to true to use the
#       X-Forwarded-For header as the client IP. Useful when Synapse is
#       behind a reverse-proxy.
#
#   resources: Only valid for an 'http' listener. A list of resources to host
#       on this port. Options for each resource are:
#
#       names: a list of names of HTTP resources. See below for a list of
#           valid resource names.
#
#       compress: set to true to enable HTTP compression for this resource.
#
#   additional_resources: Only valid for an 'http' listener. A map of
#        additional endpoints which should be loaded via dynamic modules.
#
# Valid resource names are:
#
#   client: the client-server API (/_matrix/client), and the synapse admin
#       API (/_synapse/admin). Also implies 'media' and 'static'.
#
#   consent: user consent forms (/_matrix/consent). See
#       docs/consent_tracking.md.
#
#   federation: the server-server API (/_matrix/federation). Also implies
#       'media', 'keys', 'openid'
#
#   keys: the key discovery API (/_matrix/keys).
#
#   media: the media API (/_matrix/media).
#
#   metrics: the metrics interface. See docs/metrics-howto.md.
#
#   openid: OpenID authentication.
#
#   replication: the HTTP replication API (/_synapse/replication). See
#       docs/workers.md.
#
#   static: static resources under synapse/static (/_matrix/static). (Mostly
#       useful for 'fallback authentication'.)
#
#   webclient: A web client. Requires web_client_location to be set.
#
listeners:
  # TLS-enabled listener: for when matrix traffic is sent directly to synapse.
  #
  # Disabled by default. To enable it, uncomment the following. (Note that you
  # will also need to give Synapse a TLS key and certificate: see the TLS section
  # below.)
  #
  #- port: 8448
  #  type: http
  #  tls: true
  #  resources:
  #    - names: [client, federation]

  # Unsecure HTTP listener: for when matrix traffic passes through a reverse proxy
  # that unwraps TLS.
  #
  # If you plan to use a reverse proxy, please see
  # https://github.com/matrix-org/synapse/blob/master/docs/reverse_proxy.md.
  #
  - port: 8008
    tls: false
    type: http
    x_forwarded: true
    bind_addresses: ['::1', '127.0.0.1']

    resources:
      - names: [client, federation]
        compress: false

    # example additional_resources:
    #
    #additional_resources:
    #  "/_matrix/my/custom/endpoint":
    #    module: my_module.CustomRequestHandler
    #    config: {}

  # Turn on the twisted ssh manhole service on localhost on the given
  # port.
  #
  #- port: 9000
  #  bind_addresses: ['::1', '127.0.0.1']
  #  type: manhole

# Forward extremities can build up in a room due to networking delays between
# homeservers. Once this happens in a large room, calculation of the state of
# that room can become quite expensive. To mitigate this, once the number of
# forward extremities reaches a given threshold, Synapse will send an
# org.matrix.dummy_event event, which will reduce the forward extremities
# in the room.
#
# This setting defines the threshold (i.e. number of forward extremities in the
# room) at which dummy events are sent. The default value is 10.
#
#dummy_events_threshold: 5


## Homeserver blocking ##

# How to reach the server admin, used in ResourceLimitError
#
#admin_contact: 'mailto:admin@server.com'

# Global blocking
#
#hs_disabled: false
#hs_disabled_message: 'Human readable reason for why the HS is blocked'

# Monthly Active User Blocking
#
# Used in cases where the admin or server owner wants to limit to the
# number of monthly active users.
#
# 'limit_usage_by_mau' disables/enables monthly active user blocking. When
# enabled and a limit is reached the server returns a 'ResourceLimitError'
# with error type Codes.RESOURCE_LIMIT_EXCEEDED
#
# 'max_mau_value' is the hard limit of monthly active users above which
# the server will start blocking user actions.
#
# 'mau_trial_days' is a means to add a grace period for active users. It
# means that users must be active for this number of days before they
# can be considered active and guards against the case where lots of users
# sign up in a short space of time never to return after their initial
# session.
#
# 'mau_limit_alerting' is a means of limiting client side alerting
# should the mau limit be reached. This is useful for small instances
# where the admin has 5 mau seats (say) for 5 specific people and no
# interest increasing the mau limit further. Defaults to True, which
# means that alerting is enabled
#
#limit_usage_by_mau: false
#max_mau_value: 50
#mau_trial_days: 2
#mau_limit_alerting: false

# If enabled, the metrics for the number of monthly active users will
# be populated, however no one will be limited. If limit_usage_by_mau
# is true, this is implied to be true.
#
#mau_stats_only: false

# Sometimes the server admin will want to ensure certain accounts are
# never blocked by mau checking. These accounts are specified here.
#
#mau_limit_reserved_threepids:
#  - medium: 'email'
#    address: 'reserved_user@example.com'

# Used by phonehome stats to group together related servers.
#server_context: context

# Resource-constrained homeserver settings
#
# When this is enabled, the room "complexity" will be checked before a user
# joins a new remote room. If it is above the complexity limit, the server will
# disallow joining, or will instantly leave.
#
# Room complexity is an arbitrary measure based on factors such as the number of
# users in the room.
#
limit_remote_rooms:
  # Uncomment to enable room complexity checking.
  #
  #enabled: true

  # the limit above which rooms cannot be joined. The default is 1.0.
  #
  #complexity: 0.5

  # override the error which is returned when the room is too complex.
  #
  #complexity_error: "This room is too complex."

  # allow server admins to join complex rooms. Default is false.
  #
  #admins_can_join: true

# Whether to require a user to be in the room to add an alias to it.
# Defaults to 'true'.
#
#require_membership_for_aliases: false

# Whether to allow per-room membership profiles through the send of membership
# events with profile information that differ from the target's global profile.
# Defaults to 'true'.
#
#allow_per_room_profiles: false

# How long to keep redacted events in unredacted form in the database. After
# this period redacted events get replaced with their redacted form in the DB.
#
# Defaults to `7d`. Set to `null` to disable.
#
#redaction_retention_period: 28d

# How long to track users' last seen time and IPs in the database.
#
# Defaults to `28d`. Set to `null` to disable clearing out of old rows.
#
#user_ips_max_age: 14d

# Message retention policy at the server level.
#
# Room admins and mods can define a retention period for their rooms using the
# 'm.room.retention' state event, and server admins can cap this period by setting
# the 'allowed_lifetime_min' and 'allowed_lifetime_max' config options.
#
# If this feature is enabled, Synapse will regularly look for and purge events
# which are older than the room's maximum retention period. Synapse will also
# filter events received over federation so that events that should have been
# purged are ignored and not stored again.
#
retention:
  # The message retention policies feature is disabled by default. Uncomment the
  # following line to enable it.
  #
  #enabled: true

  # Default retention policy. If set, Synapse will apply it to rooms that lack the
  # 'm.room.retention' state event. Currently, the value of 'min_lifetime' doesn't
  # matter much because Synapse doesn't take it into account yet.
  #
  #default_policy:
  #  min_lifetime: 1d
  #  max_lifetime: 1y

  # Retention policy limits. If set, and the state of a room contains a
  # 'm.room.retention' event in its state which contains a 'min_lifetime' or a
  # 'max_lifetime' that's out of these bounds, Synapse will cap the room's policy
  # to these limits when running purge jobs.
  #
  #allowed_lifetime_min: 1d
  #allowed_lifetime_max: 1y

  # Server admins can define the settings of the background jobs purging the
  # events which lifetime has expired under the 'purge_jobs' section.
  #
  # If no configuration is provided, a single job will be set up to delete expired
  # events in every room daily.
  #
  # Each job's configuration defines which range of message lifetimes the job
  # takes care of. For example, if 'shortest_max_lifetime' is '2d' and
  # 'longest_max_lifetime' is '3d', the job will handle purging expired events in
  # rooms whose state defines a 'max_lifetime' that's both higher than 2 days, and
  # lower than or equal to 3 days. Both the minimum and the maximum value of a
  # range are optional, e.g. a job with no 'shortest_max_lifetime' and a
  # 'longest_max_lifetime' of '3d' will handle every room with a retention policy
  # which 'max_lifetime' is lower than or equal to three days.
  #
  # The rationale for this per-job configuration is that some rooms might have a
  # retention policy with a low 'max_lifetime', where history needs to be purged
  # of outdated messages on a more frequent basis than for the rest of the rooms
  # (e.g. every 12h), but not want that purge to be performed by a job that's
  # iterating over every room it knows, which could be heavy on the server.
  #
  # If any purge job is configured, it is strongly recommended to have at least
  # a single job with neither 'shortest_max_lifetime' nor 'longest_max_lifetime'
  # set, or one job without 'shortest_max_lifetime' and one job without
  # 'longest_max_lifetime' set. Otherwise some rooms might be ignored, even if
  # 'allowed_lifetime_min' and 'allowed_lifetime_max' are set, because capping a
  # room's policy to these values is done after the policies are retrieved from
  # Synapse's database (which is done using the range specified in a purge job's
  # configuration).
  #
  #purge_jobs:
  #  - longest_max_lifetime: 3d
  #    interval: 12h
  #  - shortest_max_lifetime: 3d
  #    interval: 1d

# Inhibits the /requestToken endpoints from returning an error that might leak
# information about whether an e-mail address is in use or not on this
# homeserver.
# Note that for some endpoints the error situation is the e-mail already being
# used, and for others the error is entering the e-mail being unused.
# If this option is enabled, instead of returning an error, these endpoints will
# act as if no error happened and return a fake session ID ('sid') to clients.
#
#request_token_inhibit_3pid_errors: true

# A list of domains that the domain portion of 'next_link' parameters
# must match.
#
# This parameter is optionally provided by clients while requesting
# validation of an email or phone number, and maps to a link that
# users will be automatically redirected to after validation
# succeeds. Clients can make use this parameter to aid the validation
# process.
#
# The whitelist is applied whether the homeserver or an
# identity server is handling validation.
#
# The default value is no whitelist functionality; all domains are
# allowed. Setting this value to an empty list will instead disallow
# all domains.
#
#next_link_domain_whitelist: ["matrix.org"]


## TLS ##

# PEM-encoded X509 certificate for TLS.
# This certificate, as of Synapse 1.0, will need to be a valid and verifiable
# certificate, signed by a recognised Certificate Authority.
#
# Be sure to use a `.pem` file that includes the full certificate chain including
# any intermediate certificates (for instance, if using certbot, use
# `fullchain.pem` as your certificate, not `cert.pem`).
#
#tls_certificate_path: "CONFDIR/SERVERNAME.tls.crt"

# PEM-encoded private key for TLS
#
#tls_private_key_path: "CONFDIR/SERVERNAME.tls.key"

# Whether to verify TLS server certificates for outbound federation requests.
#
# Defaults to `true`. To disable certificate verification, uncomment the
# following line.
#
#federation_verify_certificates: false

# The minimum TLS version that will be used for outbound federation requests.
#
# Defaults to `1`. Configurable to `1`, `1.1`, `1.2`, or `1.3`. Note
# that setting this value higher than `1.2` will prevent federation to most
# of the public Matrix network: only configure it to `1.3` if you have an
# entirely private federation setup and you can ensure TLS 1.3 support.
#
#federation_client_minimum_tls_version: 1.2

# Skip federation certificate verification on the following whitelist
# of domains.
#
# This setting should only be used in very specific cases, such as
# federation over Tor hidden services and similar. For private networks
# of homeservers, you likely want to use a private CA instead.
#
# Only effective if federation_verify_certicates is `true`.
#
#federation_certificate_verification_whitelist:
#  - lon.example.com
#  - *.domain.com
#  - *.onion

# List of custom certificate authorities for federation traffic.
#
# This setting should only normally be used within a private network of
# homeservers.
#
# Note that this list will replace those that are provided by your
# operating environment. Certificates must be in PEM format.
#
#federation_custom_ca_list:
#  - myCA1.pem
#  - myCA2.pem
#  - myCA3.pem


## Federation ##

# Restrict federation to the following whitelist of domains.
# N.B. we recommend also firewalling your federation listener to limit
# inbound federation traffic as early as possible, rather than relying
# purely on this application-layer restriction.  If not specified, the
# default is to whitelist everything.
#
#federation_domain_whitelist:
#  - lon.example.com
#  - nyc.example.com
#  - syd.example.com

# Report prometheus metrics on the age of PDUs being sent to and received from
# the following domains. This can be used to give an idea of "delay" on inbound
# and outbound federation, though be aware that any delay can be due to problems
# at either end or with the intermediate network.
#
# By default, no domains are monitored in this way.
#
#federation_metrics_domains:
#  - matrix.org
#  - example.com

# Uncomment to disable profile lookup over federation. By default, the
# Federation API allows other homeservers to obtain profile data of any user
# on this homeserver. Defaults to 'true'.
#
#allow_profile_lookup_over_federation: false

# Uncomment to disable device display name lookup over federation. By default, the
# Federation API allows other homeservers to obtain device display names of any user
# on this homeserver. Defaults to 'true'.
#
#allow_device_name_lookup_over_federation: false


## Caching ##

# Caching can be configured through the following options.
#
# A cache 'factor' is a multiplier that can be applied to each of
# Synapse's caches in order to increase or decrease the maximum
# number of entries that can be stored.

# The number of events to cache in memory. Not affected by
# caches.global_factor.
#
#event_cache_size: 10K

caches:
   # Controls the global cache factor, which is the default cache factor
   # for all caches if a specific factor for that cache is not otherwise
   # set.
   #
   # This can also be set by the "SYNAPSE_CACHE_FACTOR" environment
   # variable. Setting by environment variable takes priority over
   # setting through the config file.
   #
   # Defaults to 0.5, which will half the size of all caches.
   #
   #global_factor: 1.0

   # A dictionary of cache name to cache factor for that individual
   # cache. Overrides the global cache factor for a given cache.
   #
   # These can also be set through environment variables comprised
   # of "SYNAPSE_CACHE_FACTOR_" + the name of the cache in capital
   # letters and underscores. Setting by environment variable
   # takes priority over setting through the config file.
   # Ex. SYNAPSE_CACHE_FACTOR_GET_USERS_WHO_SHARE_ROOM_WITH_USER=2.0
   #
   # Some caches have '*' and other characters that are not
   # alphanumeric or underscores. These caches can be named with or
   # without the special characters stripped. For example, to specify
   # the cache factor for `*stateGroupCache*` via an environment
   # variable would be `SYNAPSE_CACHE_FACTOR_STATEGROUPCACHE=2.0`.
   #
   per_cache_factors:
     #get_users_who_share_room_with_user: 2.0


## Database ##

# The 'database' setting defines the database that synapse uses to store all of
# its data.
#
# 'name' gives the database engine to use: either 'sqlite3' (for SQLite) or
# 'psycopg2' (for PostgreSQL).
#
# 'args' gives options which are passed through to the database engine,
# except for options starting 'cp_', which are used to configure the Twisted
# connection pool. For a reference to valid arguments, see:
#   * for sqlite: https://docs.python.org/3/library/sqlite3.html#sqlite3.connect
#   * for postgres: https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-PARAMKEYWORDS
#   * for the connection pool: https://twistedmatrix.com/documents/current/api/twisted.enterprise.adbapi.ConnectionPool.html#__init__
#
#
# Example SQLite configuration:
#
#database:
#  name: sqlite3
#  args:
#    database: /path/to/homeserver.db
#
#
# Example Postgres configuration:
#
#database:
#  name: psycopg2
#  args:
#    user: synapse_user
#    password: secretpassword
#    database: synapse
#    host: localhost
#    port: 5432
#    cp_min: 5
#    cp_max: 10
#
# For more information on using Synapse with Postgres, see `docs/postgres.md`.
#
database:
  name: sqlite3
  args:
    database: DATADIR/homeserver.db


## Logging ##

# A yaml python logging config file as described by
# https://docs.python.org/3.7/library/logging.config.html#configuration-dictionary-schema
#
log_config: "CONFDIR/SERVERNAME.log.config"


## Ratelimiting ##

# Ratelimiting settings for client actions (registration, login, messaging).
#
# Each ratelimiting configuration is made of two parameters:
#   - per_second: number of requests a client can send per second.
#   - burst_count: number of requests a client can send before being throttled.
#
# Synapse currently uses the following configurations:
#   - one for messages that ratelimits sending based on the account the client
#     is using
#   - one for registration that ratelimits registration requests based on the
#     client's IP address.
#   - one for login that ratelimits login requests based on the client's IP
#     address.
#   - one for login that ratelimits login requests based on the account the
#     client is attempting to log into.
#   - one for login that ratelimits login requests based on the account the
#     client is attempting to log into, based on the amount of failed login
#     attempts for this account.
#   - one for ratelimiting redactions by room admins. If this is not explicitly
#     set then it uses the same ratelimiting as per rc_message. This is useful
#     to allow room admins to deal with abuse quickly.
#   - two for ratelimiting number of rooms a user can join, "local" for when
#     users are joining rooms the server is already in (this is cheap) vs
#     "remote" for when users are trying to join rooms not on the server (which
#     can be more expensive)
#   - one for ratelimiting how often a user or IP can attempt to validate a 3PID.
#   - two for ratelimiting how often invites can be sent in a room or to a
#     specific user.
#
# The defaults are as shown below.
#
#rc_message:
#  per_second: 0.2
#  burst_count: 10
#
#rc_registration:
#  per_second: 0.17
#  burst_count: 3
#
#rc_login:
#  address:
#    per_second: 0.17
#    burst_count: 3
#  account:
#    per_second: 0.17
#    burst_count: 3
#  failed_attempts:
#    per_second: 0.17
#    burst_count: 3
#
#rc_admin_redaction:
#  per_second: 1
#  burst_count: 50
#
#rc_joins:
#  local:
#    per_second: 0.1
#    burst_count: 10
#  remote:
#    per_second: 0.01
#    burst_count: 10
#
#rc_3pid_validation:
#  per_second: 0.003
#  burst_count: 5
#
#rc_invites:
#  per_room:
#    per_second: 0.3
#    burst_count: 10
#  per_user:
#    per_second: 0.003
#    burst_count: 5

# Ratelimiting settings for incoming federation
#
# The rc_federation configuration is made up of the following settings:
#   - window_size: window size in milliseconds
#   - sleep_limit: number of federation requests from a single server in
#     a window before the server will delay processing the request.
#   - sleep_delay: duration in milliseconds to delay processing events
#     from remote servers by if they go over the sleep limit.
#   - reject_limit: maximum number of concurrent federation requests
#     allowed from a single server
#   - concurrent: number of federation requests to concurrently process
#     from a single server
#
# The defaults are as shown below.
#
#rc_federation:
#  window_size: 1000
#  sleep_limit: 10
#  sleep_delay: 500
#  reject_limit: 50
#  concurrent: 3

# Target outgoing federation transaction frequency for sending read-receipts,
# per-room.
#
# If we end up trying to send out more read-receipts, they will get buffered up
# into fewer transactions.
#
#federation_rr_transactions_per_room_per_second: 50



## Media Store ##

# Enable the media store service in the Synapse master. Uncomment the
# following if you are using a separate media store worker.
#
#enable_media_repo: false

# Directory where uploaded images and attachments are stored.
#
media_store_path: "DATADIR/media_store"

# Media storage providers allow media to be stored in different
# locations.
#
#media_storage_providers:
#  - module: file_system
#    # Whether to store newly uploaded local files
#    store_local: false
#    # Whether to store newly downloaded remote files
#    store_remote: false
#    # Whether to wait for successful storage for local uploads
#    store_synchronous: false
#    config:
#       directory: /mnt/some/other/directory

# The largest allowed upload size in bytes
#
# If you are using a reverse proxy you may also need to set this value in
# your reverse proxy's config. Notably Nginx has a small max body size by default.
# See https://matrix-org.github.io/synapse/develop/reverse_proxy.html.
#
#max_upload_size: 50M

# Maximum number of pixels that will be thumbnailed
#
#max_image_pixels: 32M

# Whether to generate new thumbnails on the fly to precisely match
# the resolution requested by the client. If true then whenever
# a new resolution is requested by the client the server will
# generate a new thumbnail. If false the server will pick a thumbnail
# from a precalculated list.
#
#dynamic_thumbnails: false

# List of thumbnails to precalculate when an image is uploaded.
#
#thumbnail_sizes:
#  - width: 32
#    height: 32
#    method: crop
#  - width: 96
#    height: 96
#    method: crop
#  - width: 320
#    height: 240
#    method: scale
#  - width: 640
#    height: 480
#    method: scale
#  - width: 800
#    height: 600
#    method: scale

# Is the preview URL API enabled?
#
# 'false' by default: uncomment the following to enable it (and specify a
# url_preview_ip_range_blacklist blacklist).
#
#url_preview_enabled: true

# List of IP address CIDR ranges that the URL preview spider is denied
# from accessing.  There are no defaults: you must explicitly
# specify a list for URL previewing to work.  You should specify any
# internal services in your network that you do not want synapse to try
# to connect to, otherwise anyone in any Matrix room could cause your
# synapse to issue arbitrary GET requests to your internal services,
# causing serious security issues.
#
# (0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
# listed here, since they correspond to unroutable addresses.)
#
# This must be specified if url_preview_enabled is set. It is recommended that
# you uncomment the following list as a starting point.
#
#url_preview_ip_range_blacklist:
#  - '127.0.0.0/8'
#  - '10.0.0.0/8'
#  - '172.16.0.0/12'
#  - '192.168.0.0/16'
#  - '100.64.0.0/10'
#  - '192.0.0.0/24'
#  - '169.254.0.0/16'
#  - '192.88.99.0/24'
#  - '198.18.0.0/15'
#  - '192.0.2.0/24'
#  - '198.51.100.0/24'
#  - '203.0.113.0/24'
#  - '224.0.0.0/4'
#  - '::1/128'
#  - 'fe80::/10'
#  - 'fc00::/7'
#  - '2001:db8::/32'
#  - 'ff00::/8'
#  - 'fec0::/10'

# List of IP address CIDR ranges that the URL preview spider is allowed
# to access even if they are specified in url_preview_ip_range_blacklist.
# This is useful for specifying exceptions to wide-ranging blacklisted
# target IP ranges - e.g. for enabling URL previews for a specific private
# website only visible in your network.
#
#url_preview_ip_range_whitelist:
#   - '192.168.1.1'

# Optional list of URL matches that the URL preview spider is
# denied from accessing.  You should use url_preview_ip_range_blacklist
# in preference to this, otherwise someone could define a public DNS
# entry that points to a private IP address and circumvent the blacklist.
# This is more useful if you know there is an entire shape of URL that
# you know that will never want synapse to try to spider.
#
# Each list entry is a dictionary of url component attributes as returned
# by urlparse.urlsplit as applied to the absolute form of the URL.  See
# https://docs.python.org/2/library/urlparse.html#urlparse.urlsplit
# The values of the dictionary are treated as an filename match pattern
# applied to that component of URLs, unless they start with a ^ in which
# case they are treated as a regular expression match.  If all the
# specified component matches for a given list item succeed, the URL is
# blacklisted.
#
#url_preview_url_blacklist:
#  # blacklist any URL with a username in its URI
#  - username: '*'
#
#  # blacklist all *.google.com URLs
#  - netloc: 'google.com'
#  - netloc: '*.google.com'
#
#  # blacklist all plain HTTP URLs
#  - scheme: 'http'
#
#  # blacklist http(s)://www.acme.com/foo
#  - netloc: 'www.acme.com'
#    path: '/foo'
#
#  # blacklist any URL with a literal IPv4 address
#  - netloc: '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'

# The largest allowed URL preview spidering size in bytes
#
#max_spider_size: 10M

# A list of values for the Accept-Language HTTP header used when
# downloading webpages during URL preview generation. This allows
# Synapse to specify the preferred languages that URL previews should
# be in when communicating with remote servers.
#
# Each value is a IETF language tag; a 2-3 letter identifier for a
# language, optionally followed by subtags separated by '-', specifying
# a country or region variant.
#
# Multiple values can be provided, and a weight can be added to each by
# using quality value syntax (;q=). '*' translates to any language.
#
# Defaults to "en".
#
# Example:
#
# url_preview_accept_language:
#   - en-UK
#   - en-US;q=0.9
#   - fr;q=0.8
#   - *;q=0.7
#
url_preview_accept_language:
#   - en


## Captcha ##
# See docs/CAPTCHA_SETUP.md for full details of configuring this.

# This homeserver's ReCAPTCHA public key. Must be specified if
# enable_registration_captcha is enabled.
#
#recaptcha_public_key: "YOUR_PUBLIC_KEY"

# This homeserver's ReCAPTCHA private key. Must be specified if
# enable_registration_captcha is enabled.
#
#recaptcha_private_key: "YOUR_PRIVATE_KEY"

# Uncomment to enable ReCaptcha checks when registering, preventing signup
# unless a captcha is answered. Requires a valid ReCaptcha
# public/private key. Defaults to 'false'.
#
#enable_registration_captcha: true

# The API endpoint to use for verifying m.login.recaptcha responses.
# Defaults to "https://www.recaptcha.net/recaptcha/api/siteverify".
#
#recaptcha_siteverify_api: "https://my.recaptcha.site"


## TURN ##

# The public URIs of the TURN server to give to clients
#
#turn_uris: []

# The shared secret used to compute passwords for the TURN server
#
#turn_shared_secret: "YOUR_SHARED_SECRET"

# The Username and password if the TURN server needs them and
# does not use a token
#
#turn_username: "TURNSERVER_USERNAME"
#turn_password: "TURNSERVER_PASSWORD"

# How long generated TURN credentials last
#
#turn_user_lifetime: 1h

# Whether guests should be allowed to use the TURN server.
# This defaults to True, otherwise VoIP will be unreliable for guests.
# However, it does introduce a slight security risk as it allows users to
# connect to arbitrary endpoints without having first signed up for a
# valid account (e.g. by passing a CAPTCHA).
#
#turn_allow_guests: true


## Registration ##
#
# Registration can be rate-limited using the parameters in the "Ratelimiting"
# section of this file.

# Enable registration for new users.
#
#enable_registration: false

# Time that a user's session remains valid for, after they log in.
#
# Note that this is not currently compatible with guest logins.
#
# Note also that this is calculated at login time: changes are not applied
# retrospectively to users who have already logged in.
#
# By default, this is infinite.
#
#session_lifetime: 24h

# The user must provide all of the below types of 3PID when registering.
#
#registrations_require_3pid:
#  - email
#  - msisdn

# Explicitly disable asking for MSISDNs from the registration
# flow (overrides registrations_require_3pid if MSISDNs are set as required)
#
#disable_msisdn_registration: true

# Mandate that users are only allowed to associate certain formats of
# 3PIDs with accounts on this server.
#
#allowed_local_3pids:
#  - medium: email
#    pattern: '^[^@]+@matrix\.org$'
#  - medium: email
#    pattern: '^[^@]+@vector\.im$'
#  - medium: msisdn
#    pattern: '\+44'

# Enable 3PIDs lookup requests to identity servers from this server.
#
#enable_3pid_lookup: true

# If set, allows registration of standard or admin accounts by anyone who
# has the shared secret, even if registration is otherwise disabled.
#
#registration_shared_secret: <PRIVATE STRING>

# Set the number of bcrypt rounds used to generate password hash.
# Larger numbers increase the work factor needed to generate the hash.
# The default number is 12 (which equates to 2^12 rounds).
# N.B. that increasing this will exponentially increase the time required
# to register or login - e.g. 24 => 2^24 rounds which will take >20 mins.
#
#bcrypt_rounds: 12

# Allows users to register as guests without a password/email/etc, and
# participate in rooms hosted on this server which have been made
# accessible to anonymous users.
#
#allow_guest_access: false

# The identity server which we suggest that clients should use when users log
# in on this server.
#
# (By default, no suggestion is made, so it is left up to the client.
# This setting is ignored unless public_baseurl is also set.)
#
#default_identity_server: https://matrix.org

# Handle threepid (email/phone etc) registration and password resets through a set of
# *trusted* identity servers. Note that this allows the configured identity server to
# reset passwords for accounts!
#
# Be aware that if `email` is not set, and SMTP options have not been
# configured in the email config block, registration and user password resets via
# email will be globally disabled.
#
# Additionally, if `msisdn` is not set, registration and password resets via msisdn
# will be disabled regardless, and users will not be able to associate an msisdn
# identifier to their account. This is due to Synapse currently not supporting
# any method of sending SMS messages on its own.
#
# To enable using an identity server for operations regarding a particular third-party
# identifier type, set the value to the URL of that identity server as shown in the
# examples below.
#
# Servers handling the these requests must answer the `/requestToken` endpoints defined
# by the Matrix Identity Service API specification:
# https://matrix.org/docs/spec/identity_service/latest
#
# If a delegate is specified, the config option public_baseurl must also be filled out.
#
account_threepid_delegates:
    #email: https://example.com     # Delegate email sending to example.com
    #msisdn: http://localhost:8090  # Delegate SMS sending to this local process

# Whether users are allowed to change their displayname after it has
# been initially set. Useful when provisioning users based on the
# contents of a third-party directory.
#
# Does not apply to server administrators. Defaults to 'true'
#
#enable_set_displayname: false

# Whether users are allowed to change their avatar after it has been
# initially set. Useful when provisioning users based on the contents
# of a third-party directory.
#
# Does not apply to server administrators. Defaults to 'true'
#
#enable_set_avatar_url: false

# Whether users can change the 3PIDs associated with their accounts
# (email address and msisdn).
#
# Defaults to 'true'
#
#enable_3pid_changes: false

# Users who register on this homeserver will automatically be joined
# to these rooms.
#
# By default, any room aliases included in this list will be created
# as a publicly joinable room when the first user registers for the
# homeserver. This behaviour can be customised with the settings below.
# If the room already exists, make certain it is a publicly joinable
# room. The join rule of the room must be set to 'public'.
#
#auto_join_rooms:
#  - "#example:example.com"

# Where auto_join_rooms are specified, setting this flag ensures that the
# the rooms exist by creating them when the first user on the
# homeserver registers.
#
# By default the auto-created rooms are publicly joinable from any federated
# server. Use the autocreate_auto_join_rooms_federated and
# autocreate_auto_join_room_preset settings below to customise this behaviour.
#
# Setting to false means that if the rooms are not manually created,
# users cannot be auto-joined since they do not exist.
#
# Defaults to true. Uncomment the following line to disable automatically
# creating auto-join rooms.
#
#autocreate_auto_join_rooms: false

# Whether the auto_join_rooms that are auto-created are available via
# federation. Only has an effect if autocreate_auto_join_rooms is true.
#
# Note that whether a room is federated cannot be modified after
# creation.
#
# Defaults to true: the room will be joinable from other servers.
# Uncomment the following to prevent users from other homeservers from
# joining these rooms.
#
#autocreate_auto_join_rooms_federated: false

# The room preset to use when auto-creating one of auto_join_rooms. Only has an
# effect if autocreate_auto_join_rooms is true.
#
# This can be one of "public_chat", "private_chat", or "trusted_private_chat".
# If a value of "private_chat" or "trusted_private_chat" is used then
# auto_join_mxid_localpart must also be configured.
#
# Defaults to "public_chat", meaning that the room is joinable by anyone, including
# federated servers if autocreate_auto_join_rooms_federated is true (the default).
# Uncomment the following to require an invitation to join these rooms.
#
#autocreate_auto_join_room_preset: private_chat

# The local part of the user id which is used to create auto_join_rooms if
# autocreate_auto_join_rooms is true. If this is not provided then the
# initial user account that registers will be used to create the rooms.
#
# The user id is also used to invite new users to any auto-join rooms which
# are set to invite-only.
#
# It *must* be configured if autocreate_auto_join_room_preset is set to
# "private_chat" or "trusted_private_chat".
#
# Note that this must be specified in order for new users to be correctly
# invited to any auto-join rooms which have been set to invite-only (either
# at the time of creation or subsequently).
#
# Note that, if the room already exists, this user must be joined and
# have the appropriate permissions to invite new members.
#
#auto_join_mxid_localpart: system

# When auto_join_rooms is specified, setting this flag to false prevents
# guest accounts from being automatically joined to the rooms.
#
# Defaults to true.
#
#auto_join_rooms_for_guests: false


## Account Validity ##

# Optional account validity configuration. This allows for accounts to be denied
# any request after a given period.
#
# Once this feature is enabled, Synapse will look for registered users without an
# expiration date at startup and will add one to every account it found using the
# current settings at that time.
# This means that, if a validity period is set, and Synapse is restarted (it will
# then derive an expiration date from the current validity period), and some time
# after that the validity period changes and Synapse is restarted, the users'
# expiration dates won't be updated unless their account is manually renewed. This
# date will be randomly selected within a range [now + period - d ; now + period],
# where d is equal to 10% of the validity period.
#
account_validity:
  # The account validity feature is disabled by default. Uncomment the
  # following line to enable it.
  #
  #enabled: true

  # The period after which an account is valid after its registration. When
  # renewing the account, its validity period will be extended by this amount
  # of time. This parameter is required when using the account validity
  # feature.
  #
  #period: 6w

  # The amount of time before an account's expiry date at which Synapse will
  # send an email to the account's email address with a renewal link. By
  # default, no such emails are sent.
  #
  # If you enable this setting, you will also need to fill out the 'email' and
  # 'public_baseurl' configuration sections.
  #
  #renew_at: 1w

  # The subject of the email sent out with the renewal link. '%(app)s' can be
  # used as a placeholder for the 'app_name' parameter from the 'email'
  # section.
  #
  # Note that the placeholder must be written '%(app)s', including the
  # trailing 's'.
  #
  # If this is not set, a default value is used.
  #
  #renew_email_subject: "Renew your %(app)s account"

  # Directory in which Synapse will try to find templates for the HTML files to
  # serve to the user when trying to renew an account. If not set, default
  # templates from within the Synapse package will be used.
  #
  # The currently available templates are:
  #
  # * account_renewed.html: Displayed to the user after they have successfully
  #       renewed their account.
  #
  # * account_previously_renewed.html: Displayed to the user if they attempt to
  #       renew their account with a token that is valid, but that has already
  #       been used. In this case the account is not renewed again.
  #
  # * invalid_token.html: Displayed to the user when they try to renew an account
  #       with an unknown or invalid renewal token.
  #
  # See https://github.com/matrix-org/synapse/tree/master/synapse/res/templates for
  # default template contents.
  #
  # The file name of some of these templates can be configured below for legacy
  # reasons.
  #
  #template_dir: "res/templates"

  # A custom file name for the 'account_renewed.html' template.
  #
  # If not set, the file is assumed to be named "account_renewed.html".
  #
  #account_renewed_html_path: "account_renewed.html"

  # A custom file name for the 'invalid_token.html' template.
  #
  # If not set, the file is assumed to be named "invalid_token.html".
  #
  #invalid_token_html_path: "invalid_token.html"


## Metrics ###

# Enable collection and rendering of performance metrics
#
#enable_metrics: false

# Enable sentry integration
# NOTE: While attempts are made to ensure that the logs don't contain
# any sensitive information, this cannot be guaranteed. By enabling
# this option the sentry server may therefore receive sensitive
# information, and it in turn may then diseminate sensitive information
# through insecure notification channels if so configured.
#
#sentry:
#    dsn: "..."

# Flags to enable Prometheus metrics which are not suitable to be
# enabled by default, either for performance reasons or limited use.
#
metrics_flags:
    # Publish synapse_federation_known_servers, a gauge of the number of
    # servers this homeserver knows about, including itself. May cause
    # performance problems on large homeservers.
    #
    #known_servers: true

# Whether or not to report anonymized homeserver usage statistics.
#
#report_stats: true|false

# The endpoint to report the anonymized homeserver usage statistics to.
# Defaults to https://matrix.org/report-usage-stats/push
#
#report_stats_endpoint: https://example.com/report-usage-stats/push


## API Configuration ##

# Controls for the state that is shared with users who receive an invite
# to a room
#
room_prejoin_state:
   # By default, the following state event types are shared with users who
   # receive invites to the room:
   #
   # - m.room.join_rules
   # - m.room.canonical_alias
   # - m.room.avatar
   # - m.room.encryption
   # - m.room.name
   # - m.room.create
   #
   # Uncomment the following to disable these defaults (so that only the event
   # types listed in 'additional_event_types' are shared). Defaults to 'false'.
   #
   #disable_default_event_types: true

   # Additional state event types to share with users when they are invited
   # to a room.
   #
   # By default, this list is empty (so only the default event types are shared).
   #
   #additional_event_types:
   #  - org.example.custom.event.type


# A list of application service config files to use
#
#app_service_config_files:
#  - app_service_1.yaml
#  - app_service_2.yaml

# Uncomment to enable tracking of application service IP addresses. Implicitly
# enables MAU tracking for application service users.
#
#track_appservice_user_ips: true


# a secret which is used to sign access tokens. If none is specified,
# the registration_shared_secret is used, if one is given; otherwise,
# a secret key is derived from the signing key.
#
#macaroon_secret_key: <PRIVATE STRING>

# a secret which is used to calculate HMACs for form values, to stop
# falsification of values. Must be specified for the User Consent
# forms to work.
#
#form_secret: <PRIVATE STRING>

## Signing Keys ##

# Path to the signing key to sign messages with
#
signing_key_path: "CONFDIR/SERVERNAME.signing.key"

# The keys that the server used to sign messages with but won't use
# to sign new messages.
#
old_signing_keys:
  # For each key, `key` should be the base64-encoded public key, and
  # `expired_ts`should be the time (in milliseconds since the unix epoch) that
  # it was last used.
  #
  # It is possible to build an entry from an old signing.key file using the
  # `export_signing_key` script which is provided with synapse.
  #
  # For example:
  #
  #"ed25519:id": { key: "base64string", expired_ts: 123456789123 }

# How long key response published by this server is valid for.
# Used to set the valid_until_ts in /key/v2 APIs.
# Determines how quickly servers will query to check which keys
# are still valid.
#
#key_refresh_interval: 1d

# The trusted servers to download signing keys from.
#
# When we need to fetch a signing key, each server is tried in parallel.
#
# Normally, the connection to the key server is validated via TLS certificates.
# Additional security can be provided by configuring a `verify key`, which
# will make synapse check that the response is signed by that key.
#
# This setting supercedes an older setting named `perspectives`. The old format
# is still supported for backwards-compatibility, but it is deprecated.
#
# 'trusted_key_servers' defaults to matrix.org, but using it will generate a
# warning on start-up. To suppress this warning, set
# 'suppress_key_server_warning' to true.
#
# Options for each entry in the list include:
#
#    server_name: the name of the server. required.
#
#    verify_keys: an optional map from key id to base64-encoded public key.
#       If specified, we will check that the response is signed by at least
#       one of the given keys.
#
#    accept_keys_insecurely: a boolean. Normally, if `verify_keys` is unset,
#       and federation_verify_certificates is not `true`, synapse will refuse
#       to start, because this would allow anyone who can spoof DNS responses
#       to masquerade as the trusted key server. If you know what you are doing
#       and are sure that your network environment provides a secure connection
#       to the key server, you can set this to `true` to override this
#       behaviour.
#
# An example configuration might look like:
#
#trusted_key_servers:
#  - server_name: "my_trusted_server.example.com"
#    verify_keys:
#      "ed25519:auto": "abcdefghijklmnopqrstuvwxyzabcdefghijklmopqr"
#  - server_name: "my_other_trusted_server.example.com"
#
trusted_key_servers:
  - server_name: "matrix.org"

# Uncomment the following to disable the warning that is emitted when the
# trusted_key_servers include 'matrix.org'. See above.
#
#suppress_key_server_warning: true

# The signing keys to use when acting as a trusted key server. If not specified
# defaults to the server signing key.
#
# Can contain multiple keys, one per line.
#
#key_server_signing_keys_path: "key_server_signing_keys.key"


## Single sign-on integration ##

# The following settings can be used to make Synapse use a single sign-on
# provider for authentication, instead of its internal password database.
#
# You will probably also want to set the following options to `false` to
# disable the regular login/registration flows:
#   * enable_registration
#   * password_config.enabled
#
# You will also want to investigate the settings under the "sso" configuration
# section below.

# Enable SAML2 for registration and login. Uses pysaml2.
#
# At least one of `sp_config` or `config_path` must be set in this section to
# enable SAML login.
#
# Once SAML support is enabled, a metadata file will be exposed at
# https://<server>:<port>/_synapse/client/saml2/metadata.xml, which you may be able to
# use to configure your SAML IdP with. Alternatively, you can manually configure
# the IdP to use an ACS location of
# https://<server>:<port>/_synapse/client/saml2/authn_response.
#
saml2_config:
  # `sp_config` is the configuration for the pysaml2 Service Provider.
  # See pysaml2 docs for format of config.
  #
  # Default values will be used for the 'entityid' and 'service' settings,
  # so it is not normally necessary to specify them unless you need to
  # override them.
  #
  sp_config:
    # Point this to the IdP's metadata. You must provide either a local
    # file via the `local` attribute or (preferably) a URL via the
    # `remote` attribute.
    #
    #metadata:
    #  local: ["saml2/idp.xml"]
    #  remote:
    #    - url: https://our_idp/metadata.xml

    # Allowed clock difference in seconds between the homeserver and IdP.
    #
    # Uncomment the below to increase the accepted time difference from 0 to 3 seconds.
    #
    #accepted_time_diff: 3

    # By default, the user has to go to our login page first. If you'd like
    # to allow IdP-initiated login, set 'allow_unsolicited: true' in a
    # 'service.sp' section:
    #
    #service:
    #  sp:
    #    allow_unsolicited: true

    # The examples below are just used to generate our metadata xml, and you
    # may well not need them, depending on your setup. Alternatively you
    # may need a whole lot more detail - see the pysaml2 docs!

    #description: ["My awesome SP", "en"]
    #name: ["Test SP", "en"]

    #ui_info:
    #  display_name:
    #    - lang: en
    #      text: "Display Name is the descriptive name of your service."
    #  description:
    #    - lang: en
    #      text: "Description should be a short paragraph explaining the purpose of the service."
    #  information_url:
    #    - lang: en
    #      text: "https://example.com/terms-of-service"
    #  privacy_statement_url:
    #    - lang: en
    #      text: "https://example.com/privacy-policy"
    #  keywords:
    #    - lang: en
    #      text: ["Matrix", "Element"]
    #  logo:
    #    - lang: en
    #      text: "https://example.com/logo.svg"
    #      width: "200"
    #      height: "80"

    #organization:
    #  name: Example com
    #  display_name:
    #    - ["Example co", "en"]
    #  url: "http://example.com"

    #contact_person:
    #  - given_name: Bob
    #    sur_name: "the Sysadmin"
    #    email_address": ["admin@example.com"]
    #    contact_type": technical

  # Instead of putting the config inline as above, you can specify a
  # separate pysaml2 configuration file:
  #
  #config_path: "CONFDIR/sp_conf.py"

  # The lifetime of a SAML session. This defines how long a user has to
  # complete the authentication process, if allow_unsolicited is unset.
  # The default is 15 minutes.
  #
  #saml_session_lifetime: 5m

  # An external module can be provided here as a custom solution to
  # mapping attributes returned from a saml provider onto a matrix user.
  #
  user_mapping_provider:
    # The custom module's class. Uncomment to use a custom module.
    #
    #module: mapping_provider.SamlMappingProvider

    # Custom configuration values for the module. Below options are
    # intended for the built-in provider, they should be changed if
    # using a custom module. This section will be passed as a Python
    # dictionary to the module's `parse_config` method.
    #
    config:
      # The SAML attribute (after mapping via the attribute maps) to use
      # to derive the Matrix ID from. 'uid' by default.
      #
      # Note: This used to be configured by the
      # saml2_config.mxid_source_attribute option. If that is still
      # defined, its value will be used instead.
      #
      #mxid_source_attribute: displayName

      # The mapping system to use for mapping the saml attribute onto a
      # matrix ID.
      #
      # Options include:
      #  * 'hexencode' (which maps unpermitted characters to '=xx')
      #  * 'dotreplace' (which replaces unpermitted characters with
      #     '.').
      # The default is 'hexencode'.
      #
      # Note: This used to be configured by the
      # saml2_config.mxid_mapping option. If that is still defined, its
      # value will be used instead.
      #
      #mxid_mapping: dotreplace

  # In previous versions of synapse, the mapping from SAML attribute to
  # MXID was always calculated dynamically rather than stored in a
  # table. For backwards- compatibility, we will look for user_ids
  # matching such a pattern before creating a new account.
  #
  # This setting controls the SAML attribute which will be used for this
  # backwards-compatibility lookup. Typically it should be 'uid', but if
  # the attribute maps are changed, it may be necessary to change it.
  #
  # The default is 'uid'.
  #
  #grandfathered_mxid_source_attribute: upn

  # It is possible to configure Synapse to only allow logins if SAML attributes
  # match particular values. The requirements can be listed under
  # `attribute_requirements` as shown below. All of the listed attributes must
  # match for the login to be permitted.
  #
  #attribute_requirements:
  #  - attribute: userGroup
  #    value: "staff"
  #  - attribute: department
  #    value: "sales"

  # If the metadata XML contains multiple IdP entities then the `idp_entityid`
  # option must be set to the entity to redirect users to.
  #
  # Most deployments only have a single IdP entity and so should omit this
  # option.
  #
  #idp_entityid: 'https://our_idp/entityid'


# List of OpenID Connect (OIDC) / OAuth 2.0 identity providers, for registration
# and login.
#
# Options for each entry include:
#
#   idp_id: a unique identifier for this identity provider. Used internally
#       by Synapse; should be a single word such as 'github'.
#
#       Note that, if this is changed, users authenticating via that provider
#       will no longer be recognised as the same user!
#
#       (Use "oidc" here if you are migrating from an old "oidc_config"
#       configuration.)
#
#   idp_name: A user-facing name for this identity provider, which is used to
#       offer the user a choice of login mechanisms.
#
#   idp_icon: An optional icon for this identity provider, which is presented
#       by clients and Synapse's own IdP picker page. If given, must be an
#       MXC URI of the format mxc://<server-name>/<media-id>. (An easy way to
#       obtain such an MXC URI is to upload an image to an (unencrypted) room
#       and then copy the "url" from the source of the event.)
#
#   idp_brand: An optional brand for this identity provider, allowing clients
#       to style the login flow according to the identity provider in question.
#       See the spec for possible options here.
#
#   discover: set to 'false' to disable the use of the OIDC discovery mechanism
#       to discover endpoints. Defaults to true.
#
#   issuer: Required. The OIDC issuer. Used to validate tokens and (if discovery
#       is enabled) to discover the provider's endpoints.
#
#   client_id: Required. oauth2 client id to use.
#
#   client_secret: oauth2 client secret to use. May be omitted if
#        client_secret_jwt_key is given, or if client_auth_method is 'none'.
#
#   client_secret_jwt_key: Alternative to client_secret: details of a key used
#      to create a JSON Web Token to be used as an OAuth2 client secret. If
#      given, must be a dictionary with the following properties:
#
#          key: a pem-encoded signing key. Must be a suitable key for the
#              algorithm specified. Required unless 'key_file' is given.
#
#          key_file: the path to file containing a pem-encoded signing key file.
#              Required unless 'key' is given.
#
#          jwt_header: a dictionary giving properties to include in the JWT
#              header. Must include the key 'alg', giving the algorithm used to
#              sign the JWT, such as "ES256", using the JWA identifiers in
#              RFC7518.
#
#          jwt_payload: an optional dictionary giving properties to include in
#              the JWT payload. Normally this should include an 'iss' key.
#
#   client_auth_method: auth method to use when exchanging the token. Valid
#       values are 'client_secret_basic' (default), 'client_secret_post' and
#       'none'.
#
#   scopes: list of scopes to request. This should normally include the "openid"
#       scope. Defaults to ["openid"].
#
#   authorization_endpoint: the oauth2 authorization endpoint. Required if
#       provider discovery is disabled.
#
#   token_endpoint: the oauth2 token endpoint. Required if provider discovery is
#       disabled.
#
#   userinfo_endpoint: the OIDC userinfo endpoint. Required if discovery is
#       disabled and the 'openid' scope is not requested.
#
#   jwks_uri: URI where to fetch the JWKS. Required if discovery is disabled and
#       the 'openid' scope is used.
#
#   skip_verification: set to 'true' to skip metadata verification. Use this if
#       you are connecting to a provider that is not OpenID Connect compliant.
#       Defaults to false. Avoid this in production.
#
#   user_profile_method: Whether to fetch the user profile from the userinfo
#       endpoint. Valid values are: 'auto' or 'userinfo_endpoint'.
#
#       Defaults to 'auto', which fetches the userinfo endpoint if 'openid' is
#       included in 'scopes'. Set to 'userinfo_endpoint' to always fetch the
#       userinfo endpoint.
#
#   allow_existing_users: set to 'true' to allow a user logging in via OIDC to
#       match a pre-existing account instead of failing. This could be used if
#       switching from password logins to OIDC. Defaults to false.
#
#   user_mapping_provider: Configuration for how attributes returned from a OIDC
#       provider are mapped onto a matrix user. This setting has the following
#       sub-properties:
#
#       module: The class name of a custom mapping module. Default is
#           'synapse.handlers.oidc.JinjaOidcMappingProvider'.
#           See https://github.com/matrix-org/synapse/blob/master/docs/sso_mapping_providers.md#openid-mapping-providers
#           for information on implementing a custom mapping provider.
#
#       config: Configuration for the mapping provider module. This section will
#           be passed as a Python dictionary to the user mapping provider
#           module's `parse_config` method.
#
#           For the default provider, the following settings are available:
#
#             subject_claim: name of the claim containing a unique identifier
#                 for the user. Defaults to 'sub', which OpenID Connect
#                 compliant providers should provide.
#
#             localpart_template: Jinja2 template for the localpart of the MXID.
#                 If this is not set, the user will be prompted to choose their
#                 own username (see 'sso_auth_account_details.html' in the 'sso'
#                 section of this file).
#
#             display_name_template: Jinja2 template for the display name to set
#                 on first login. If unset, no displayname will be set.
#
#             email_template: Jinja2 template for the email address of the user.
#                 If unset, no email address will be added to the account.
#
#             extra_attributes: a map of Jinja2 templates for extra attributes
#                 to send back to the client during login.
#                 Note that these are non-standard and clients will ignore them
#                 without modifications.
#
#           When rendering, the Jinja2 templates are given a 'user' variable,
#           which is set to the claims returned by the UserInfo Endpoint and/or
#           in the ID Token.
#
#   It is possible to configure Synapse to only allow logins if certain attributes
#   match particular values in the OIDC userinfo. The requirements can be listed under
#   `attribute_requirements` as shown below. All of the listed attributes must
#   match for the login to be permitted. Additional attributes can be added to
#   userinfo by expanding the `scopes` section of the OIDC config to retrieve
#   additional information from the OIDC provider.
#
#   If the OIDC claim is a list, then the attribute must match any value in the list.
#   Otherwise, it must exactly match the value of the claim. Using the example
#   below, the `family_name` claim MUST be "Stephensson", but the `groups`
#   claim MUST contain "admin".
#
#   attribute_requirements:
#     - attribute: family_name
#       value: "Stephensson"
#     - attribute: groups
#       value: "admin"
#
# See https://github.com/matrix-org/synapse/blob/master/docs/openid.md
# for information on how to configure these options.
#
# For backwards compatibility, it is also possible to configure a single OIDC
# provider via an 'oidc_config' setting. This is now deprecated and admins are
# advised to migrate to the 'oidc_providers' format. (When doing that migration,
# use 'oidc' for the idp_id to ensure that existing users continue to be
# recognised.)
#
oidc_providers:
  # Generic example
  #
  #- idp_id: my_idp
  #  idp_name: "My OpenID provider"
  #  idp_icon: "mxc://example.com/mediaid"
  #  discover: false
  #  issuer: "https://accounts.example.com/"
  #  client_id: "provided-by-your-issuer"
  #  client_secret: "provided-by-your-issuer"
  #  client_auth_method: client_secret_post
  #  scopes: ["openid", "profile"]
  #  authorization_endpoint: "https://accounts.example.com/oauth2/auth"
  #  token_endpoint: "https://accounts.example.com/oauth2/token"
  #  userinfo_endpoint: "https://accounts.example.com/userinfo"
  #  jwks_uri: "https://accounts.example.com/.well-known/jwks.json"
  #  skip_verification: true
  #  user_mapping_provider:
  #    config:
  #      subject_claim: "id"
  #      localpart_template: "{{ user.login }}"
  #      display_name_template: "{{ user.name }}"
  #      email_template: "{{ user.email }}"
  #  attribute_requirements:
  #    - attribute: userGroup
  #      value: "synapseUsers"


# Enable Central Authentication Service (CAS) for registration and login.
#
cas_config:
  # Uncomment the following to enable authorization against a CAS server.
  # Defaults to false.
  #
  #enabled: true

  # The URL of the CAS authorization endpoint.
  #
  #server_url: "https://cas-server.com"

  # The attribute of the CAS response to use as the display name.
  #
  # If unset, no displayname will be set.
  #
  #displayname_attribute: name

  # It is possible to configure Synapse to only allow logins if CAS attributes
  # match particular values. All of the keys in the mapping below must exist
  # and the values must match the given value. Alternately if the given value
  # is None then any value is allowed (the attribute just must exist).
  # All of the listed attributes must match for the login to be permitted.
  #
  #required_attributes:
  #  userGroup: "staff"
  #  department: None


# Additional settings to use with single-sign on systems such as OpenID Connect,
# SAML2 and CAS.
#
sso:
    # A list of client URLs which are whitelisted so that the user does not
    # have to confirm giving access to their account to the URL. Any client
    # whose URL starts with an entry in the following list will not be subject
    # to an additional confirmation step after the SSO login is completed.
    #
    # WARNING: An entry such as "https://my.client" is insecure, because it
    # will also match "https://my.client.evil.site", exposing your users to
    # phishing attacks from evil.site. To avoid this, include a slash after the
    # hostname: "https://my.client/".
    #
    # If public_baseurl is set, then the login fallback page (used by clients
    # that don't natively support the required login flows) is whitelisted in
    # addition to any URLs in this list.
    #
    # By default, this list is empty.
    #
    #client_whitelist:
    #  - https://riot.im/develop
    #  - https://my.custom.client/

    # Uncomment to keep a user's profile fields in sync with information from
    # the identity provider. Currently only syncing the displayname is
    # supported. Fields are checked on every SSO login, and are updated
    # if necessary.
    #
    # Note that enabling this option will override user profile information,
    # regardless of whether users have opted-out of syncing that
    # information when first signing in. Defaults to false.
    #
    #update_profile_information: true

    # Directory in which Synapse will try to find the template files below.
    # If not set, or the files named below are not found within the template
    # directory, default templates from within the Synapse package will be used.
    #
    # Synapse will look for the following templates in this directory:
    #
    # * HTML page to prompt the user to choose an Identity Provider during
    #   login: 'sso_login_idp_picker.html'.
    #
    #   This is only used if multiple SSO Identity Providers are configured.
    #
    #   When rendering, this template is given the following variables:
    #     * redirect_url: the URL that the user will be redirected to after
    #       login.
    #
    #     * server_name: the homeserver's name.
    #
    #     * providers: a list of available Identity Providers. Each element is
    #       an object with the following attributes:
    #
    #         * idp_id: unique identifier for the IdP
    #         * idp_name: user-facing name for the IdP
    #         * idp_icon: if specified in the IdP config, an MXC URI for an icon
    #              for the IdP
    #         * idp_brand: if specified in the IdP config, a textual identifier
    #              for the brand of the IdP
    #
    #   The rendered HTML page should contain a form which submits its results
    #   back as a GET request, with the following query parameters:
    #
    #     * redirectUrl: the client redirect URI (ie, the `redirect_url` passed
    #       to the template)
    #
    #     * idp: the 'idp_id' of the chosen IDP.
    #
    # * HTML page to prompt new users to enter a userid and confirm other
    #   details: 'sso_auth_account_details.html'. This is only shown if the
    #   SSO implementation (with any user_mapping_provider) does not return
    #   a localpart.
    #
    #   When rendering, this template is given the following variables:
    #
    #     * server_name: the homeserver's name.
    #
    #     * idp: details of the SSO Identity Provider that the user logged in
    #       with: an object with the following attributes:
    #
    #         * idp_id: unique identifier for the IdP
    #         * idp_name: user-facing name for the IdP
    #         * idp_icon: if specified in the IdP config, an MXC URI for an icon
    #              for the IdP
    #         * idp_brand: if specified in the IdP config, a textual identifier
    #              for the brand of the IdP
    #
    #     * user_attributes: an object containing details about the user that
    #       we received from the IdP. May have the following attributes:
    #
    #         * display_name: the user's display_name
    #         * emails: a list of email addresses
    #
    #   The template should render a form which submits the following fields:
    #
    #     * username: the localpart of the user's chosen user id
    #
    # * HTML page allowing the user to consent to the server's terms and
    #   conditions. This is only shown for new users, and only if
    #   `user_consent.require_at_registration` is set.
    #
    #   When rendering, this template is given the following variables:
    #
    #     * server_name: the homeserver's name.
    #
    #     * user_id: the user's matrix proposed ID.
    #
    #     * user_profile.display_name: the user's proposed display name, if any.
    #
    #     * consent_version: the version of the terms that the user will be
    #       shown
    #
    #     * terms_url: a link to the page showing the terms.
    #
    #   The template should render a form which submits the following fields:
    #
    #     * accepted_version: the version of the terms accepted by the user
    #       (ie, 'consent_version' from the input variables).
    #
    # * HTML page for a confirmation step before redirecting back to the client
    #   with the login token: 'sso_redirect_confirm.html'.
    #
    #   When rendering, this template is given the following variables:
    #
    #     * redirect_url: the URL the user is about to be redirected to.
    #
    #     * display_url: the same as `redirect_url`, but with the query
    #                    parameters stripped. The intention is to have a
    #                    human-readable URL to show to users, not to use it as
    #                    the final address to redirect to.
    #
    #     * server_name: the homeserver's name.
    #
    #     * new_user: a boolean indicating whether this is the user's first time
    #          logging in.
    #
    #     * user_id: the user's matrix ID.
    #
    #     * user_profile.avatar_url: an MXC URI for the user's avatar, if any.
    #           None if the user has not set an avatar.
    #
    #     * user_profile.display_name: the user's display name. None if the user
    #           has not set a display name.
    #
    # * HTML page which notifies the user that they are authenticating to confirm
    #   an operation on their account during the user interactive authentication
    #   process: 'sso_auth_confirm.html'.
    #
    #   When rendering, this template is given the following variables:
    #     * redirect_url: the URL the user is about to be redirected to.
    #
    #     * description: the operation which the user is being asked to confirm
    #
    #     * idp: details of the Identity Provider that we will use to confirm
    #       the user's identity: an object with the following attributes:
    #
    #         * idp_id: unique identifier for the IdP
    #         * idp_name: user-facing name for the IdP
    #         * idp_icon: if specified in the IdP config, an MXC URI for an icon
    #              for the IdP
    #         * idp_brand: if specified in the IdP config, a textual identifier
    #              for the brand of the IdP
    #
    # * HTML page shown after a successful user interactive authentication session:
    #   'sso_auth_success.html'.
    #
    #   Note that this page must include the JavaScript which notifies of a successful authentication
    #   (see https://matrix.org/docs/spec/client_server/r0.6.0#fallback).
    #
    #   This template has no additional variables.
    #
    # * HTML page shown after a user-interactive authentication session which
    #   does not map correctly onto the expected user: 'sso_auth_bad_user.html'.
    #
    #   When rendering, this template is given the following variables:
    #     * server_name: the homeserver's name.
    #     * user_id_to_verify: the MXID of the user that we are trying to
    #       validate.
    #
    # * HTML page shown during single sign-on if a deactivated user (according to Synapse's database)
    #   attempts to login: 'sso_account_deactivated.html'.
    #
    #   This template has no additional variables.
    #
    # * HTML page to display to users if something goes wrong during the
    #   OpenID Connect authentication process: 'sso_error.html'.
    #
    #   When rendering, this template is given two variables:
    #     * error: the technical name of the error
    #     * error_description: a human-readable message for the error
    #
    # You can see the default templates at:
    # https://github.com/matrix-org/synapse/tree/master/synapse/res/templates
    #
    #template_dir: "res/templates"


# JSON web token integration. The following settings can be used to make
# Synapse JSON web tokens for authentication, instead of its internal
# password database.
#
# Each JSON Web Token needs to contain a "sub" (subject) claim, which is
# used as the localpart of the mxid.
#
# Additionally, the expiration time ("exp"), not before time ("nbf"),
# and issued at ("iat") claims are validated if present.
#
# Note that this is a non-standard login type and client support is
# expected to be non-existent.
#
# See https://github.com/matrix-org/synapse/blob/master/docs/jwt.md.
#
#jwt_config:
    # Uncomment the following to enable authorization using JSON web
    # tokens. Defaults to false.
    #
    #enabled: true

    # This is either the private shared secret or the public key used to
    # decode the contents of the JSON web token.
    #
    # Required if 'enabled' is true.
    #
    #secret: "provided-by-your-issuer"

    # The algorithm used to sign the JSON web token.
    #
    # Supported algorithms are listed at
    # https://pyjwt.readthedocs.io/en/latest/algorithms.html
    #
    # Required if 'enabled' is true.
    #
    #algorithm: "provided-by-your-issuer"

    # The issuer to validate the "iss" claim against.
    #
    # Optional, if provided the "iss" claim will be required and
    # validated for all JSON web tokens.
    #
    #issuer: "provided-by-your-issuer"

    # A list of audiences to validate the "aud" claim against.
    #
    # Optional, if provided the "aud" claim will be required and
    # validated for all JSON web tokens.
    #
    # Note that if the "aud" claim is included in a JSON web token then
    # validation will fail without configuring audiences.
    #
    #audiences:
    #    - "provided-by-your-issuer"


password_config:
   # Uncomment to disable password login
   #
   #enabled: false

   # Uncomment to disable authentication against the local password
   # database. This is ignored if `enabled` is false, and is only useful
   # if you have other password_providers.
   #
   #localdb_enabled: false

   # Uncomment and change to a secret random string for extra security.
   # DO NOT CHANGE THIS AFTER INITIAL SETUP!
   #
   #pepper: "EVEN_MORE_SECRET"

   # Define and enforce a password policy. Each parameter is optional.
   # This is an implementation of MSC2000.
   #
   policy:
      # Whether to enforce the password policy.
      # Defaults to 'false'.
      #
      #enabled: true

      # Minimum accepted length for a password.
      # Defaults to 0.
      #
      #minimum_length: 15

      # Whether a password must contain at least one digit.
      # Defaults to 'false'.
      #
      #require_digit: true

      # Whether a password must contain at least one symbol.
      # A symbol is any character that's not a number or a letter.
      # Defaults to 'false'.
      #
      #require_symbol: true

      # Whether a password must contain at least one lowercase letter.
      # Defaults to 'false'.
      #
      #require_lowercase: true

      # Whether a password must contain at least one lowercase letter.
      # Defaults to 'false'.
      #
      #require_uppercase: true

ui_auth:
    # The amount of time to allow a user-interactive authentication session
    # to be active.
    #
    # This defaults to 0, meaning the user is queried for their credentials
    # before every action, but this can be overridden to allow a single
    # validation to be re-used.  This weakens the protections afforded by
    # the user-interactive authentication process, by allowing for multiple
    # (and potentially different) operations to use the same validation session.
    #
    # This is ignored for potentially "dangerous" operations (including
    # deactivating an account, modifying an account password, and
    # adding a 3PID).
    #
    # Uncomment below to allow for credential validation to last for 15
    # seconds.
    #
    #session_timeout: "15s"


# Configuration for sending emails from Synapse.
#
email:
  # The hostname of the outgoing SMTP server to use. Defaults to 'localhost'.
  #
  #smtp_host: mail.server

  # The port on the mail server for outgoing SMTP. Defaults to 25.
  #
  #smtp_port: 587

  # Username/password for authentication to the SMTP server. By default, no
  # authentication is attempted.
  #
  #smtp_user: "exampleusername"
  #smtp_pass: "examplepassword"

  # Uncomment the following to require TLS transport security for SMTP.
  # By default, Synapse will connect over plain text, and will then switch to
  # TLS via STARTTLS *if the SMTP server supports it*. If this option is set,
  # Synapse will refuse to connect unless the server supports STARTTLS.
  #
  #require_transport_security: true

  # notif_from defines the "From" address to use when sending emails.
  # It must be set if email sending is enabled.
  #
  # The placeholder '%(app)s' will be replaced by the application name,
  # which is normally 'app_name' (below), but may be overridden by the
  # Matrix client application.
  #
  # Note that the placeholder must be written '%(app)s', including the
  # trailing 's'.
  #
  #notif_from: "Your Friendly %(app)s homeserver <noreply@example.com>"

  # app_name defines the default value for '%(app)s' in notif_from and email
  # subjects. It defaults to 'Matrix'.
  #
  #app_name: my_branded_matrix_server

  # Uncomment the following to enable sending emails for messages that the user
  # has missed. Disabled by default.
  #
  #enable_notifs: true

  # Uncomment the following to disable automatic subscription to email
  # notifications for new users. Enabled by default.
  #
  #notif_for_new_users: false

  # Custom URL for client links within the email notifications. By default
  # links will be based on "https://matrix.to".
  #
  # (This setting used to be called riot_base_url; the old name is still
  # supported for backwards-compatibility but is now deprecated.)
  #
  #client_base_url: "http://localhost/riot"

  # Configure the time that a validation email will expire after sending.
  # Defaults to 1h.
  #
  #validation_token_lifetime: 15m

  # The web client location to direct users to during an invite. This is passed
  # to the identity server as the org.matrix.web_client_location key. Defaults
  # to unset, giving no guidance to the identity server.
  #
  #invite_client_location: https://app.element.io

  # Directory in which Synapse will try to find the template files below.
  # If not set, or the files named below are not found within the template
  # directory, default templates from within the Synapse package will be used.
  #
  # Synapse will look for the following templates in this directory:
  #
  # * The contents of email notifications of missed events: 'notif_mail.html' and
  #   'notif_mail.txt'.
  #
  # * The contents of account expiry notice emails: 'notice_expiry.html' and
  #   'notice_expiry.txt'.
  #
  # * The contents of password reset emails sent by the homeserver:
  #   'password_reset.html' and 'password_reset.txt'
  #
  # * An HTML page that a user will see when they follow the link in the password
  #   reset email. The user will be asked to confirm the action before their
  #   password is reset: 'password_reset_confirmation.html'
  #
  # * HTML pages for success and failure that a user will see when they confirm
  #   the password reset flow using the page above: 'password_reset_success.html'
  #   and 'password_reset_failure.html'
  #
  # * The contents of address verification emails sent during registration:
  #   'registration.html' and 'registration.txt'
  #
  # * HTML pages for success and failure that a user will see when they follow
  #   the link in an address verification email sent during registration:
  #   'registration_success.html' and 'registration_failure.html'
  #
  # * The contents of address verification emails sent when an address is added
  #   to a Matrix account: 'add_threepid.html' and 'add_threepid.txt'
  #
  # * HTML pages for success and failure that a user will see when they follow
  #   the link in an address verification email sent when an address is added
  #   to a Matrix account: 'add_threepid_success.html' and
  #   'add_threepid_failure.html'
  #
  # You can see the default templates at:
  # https://github.com/matrix-org/synapse/tree/master/synapse/res/templates
  #
  #template_dir: "res/templates"

  # Subjects to use when sending emails from Synapse.
  #
  # The placeholder '%(app)s' will be replaced with the value of the 'app_name'
  # setting above, or by a value dictated by the Matrix client application.
  #
  # If a subject isn't overridden in this configuration file, the value used as
  # its example will be used.
  #
  #subjects:

    # Subjects for notification emails.
    #
    # On top of the '%(app)s' placeholder, these can use the following
    # placeholders:
    #
    #   * '%(person)s', which will be replaced by the display name of the user(s)
    #      that sent the message(s), e.g. "Alice and Bob".
    #   * '%(room)s', which will be replaced by the name of the room the
    #      message(s) have been sent to, e.g. "My super room".
    #
    # See the example provided for each setting to see which placeholder can be
    # used and how to use them.
    #
    # Subject to use to notify about one message from one or more user(s) in a
    # room which has a name.
    #message_from_person_in_room: "[%(app)s] You have a message on %(app)s from %(person)s in the %(room)s room..."
    #
    # Subject to use to notify about one message from one or more user(s) in a
    # room which doesn't have a name.
    #message_from_person: "[%(app)s] You have a message on %(app)s from %(person)s..."
    #
    # Subject to use to notify about multiple messages from one or more users in
    # a room which doesn't have a name.
    #messages_from_person: "[%(app)s] You have messages on %(app)s from %(person)s..."
    #
    # Subject to use to notify about multiple messages in a room which has a
    # name.
    #messages_in_room: "[%(app)s] You have messages on %(app)s in the %(room)s room..."
    #
    # Subject to use to notify about multiple messages in multiple rooms.
    #messages_in_room_and_others: "[%(app)s] You have messages on %(app)s in the %(room)s room and others..."
    #
    # Subject to use to notify about multiple messages from multiple persons in
    # multiple rooms. This is similar to the setting above except it's used when
    # the room in which the notification was triggered has no name.
    #messages_from_person_and_others: "[%(app)s] You have messages on %(app)s from %(person)s and others..."
    #
    # Subject to use to notify about an invite to a room which has a name.
    #invite_from_person_to_room: "[%(app)s] %(person)s has invited you to join the %(room)s room on %(app)s..."
    #
    # Subject to use to notify about an invite to a room which doesn't have a
    # name.
    #invite_from_person: "[%(app)s] %(person)s has invited you to chat on %(app)s..."

    # Subject for emails related to account administration.
    #
    # On top of the '%(app)s' placeholder, these one can use the
    # '%(server_name)s' placeholder, which will be replaced by the value of the
    # 'server_name' setting in your Synapse configuration.
    #
    # Subject to use when sending a password reset email.
    #password_reset: "[%(server_name)s] Password reset"
    #
    # Subject to use when sending a verification email to assert an address's
    # ownership.
    #email_validation: "[%(server_name)s] Validate your email"


# Password providers allow homeserver administrators to integrate
# their Synapse installation with existing authentication methods
# ex. LDAP, external tokens, etc.
#
# For more information and known implementations, please see
# https://github.com/matrix-org/synapse/blob/master/docs/password_auth_providers.md
#
# Note: instances wishing to use SAML or CAS authentication should
# instead use the `saml2_config` or `cas_config` options,
# respectively.
#
password_providers:
#    # Example config for an LDAP auth provider
#    - module: "ldap_auth_provider.LdapAuthProvider"
#      config:
#        enabled: true
#        uri: "ldap://ldap.example.com:389"
#        start_tls: true
#        base: "ou=users,dc=example,dc=com"
#        attributes:
#           uid: "cn"
#           mail: "email"
#           name: "givenName"
#        #bind_dn:
#        #bind_password:
#        #filter: "(objectClass=posixAccount)"



## Push ##

push:
  # Clients requesting push notifications can either have the body of
  # the message sent in the notification poke along with other details
  # like the sender, or just the event ID and room ID (`event_id_only`).
  # If clients choose the former, this option controls whether the
  # notification request includes the content of the event (other details
  # like the sender are still included). For `event_id_only` push, it
  # has no effect.
  #
  # For modern android devices the notification content will still appear
  # because it is loaded by the app. iPhone, however will send a
  # notification saying only that a message arrived and who it came from.
  #
  # The default value is "true" to include message details. Uncomment to only
  # include the event ID and room ID in push notification payloads.
  #
  #include_content: false

  # When a push notification is received, an unread count is also sent.
  # This number can either be calculated as the number of unread messages
  # for the user, or the number of *rooms* the user has unread messages in.
  #
  # The default value is "true", meaning push clients will see the number of
  # rooms with unread messages in them. Uncomment to instead send the number
  # of unread messages.
  #
  #group_unread_count_by_room: false


## Rooms ##

# Controls whether locally-created rooms should be end-to-end encrypted by
# default.
#
# Possible options are "all", "invite", and "off". They are defined as:
#
# * "all": any locally-created room
# * "invite": any room created with the "private_chat" or "trusted_private_chat"
#             room creation presets
# * "off": this option will take no effect
#
# The default value is "off".
#
# Note that this option will only affect rooms created after it is set. It
# will also not affect rooms created by other servers.
#
#encryption_enabled_by_default_for_room_type: invite


# Uncomment to allow non-server-admin users to create groups on this server
#
#enable_group_creation: true

# If enabled, non server admins can only create groups with local parts
# starting with this prefix
#
#group_creation_prefix: "unofficial_"



# User Directory configuration
#
user_directory:
    # Defines whether users can search the user directory. If false then
    # empty responses are returned to all queries. Defaults to true.
    #
    # Uncomment to disable the user directory.
    #
    #enabled: false

    # Defines whether to search all users visible to your HS when searching
    # the user directory, rather than limiting to users visible in public
    # rooms. Defaults to false.
    #
    # If you set it true, you'll have to rebuild the user_directory search
    # indexes, see:
    # https://github.com/matrix-org/synapse/blob/master/docs/user_directory.md
    #
    # Uncomment to return search results containing all known users, even if that
    # user does not share a room with the requester.
    #
    #search_all_users: true

    # Defines whether to prefer local users in search query results.
    # If True, local users are more likely to appear above remote users
    # when searching the user directory. Defaults to false.
    #
    # Uncomment to prefer local over remote users in user directory search
    # results.
    #
    #prefer_local_users: true


# User Consent configuration
#
# for detailed instructions, see
# https://github.com/matrix-org/synapse/blob/master/docs/consent_tracking.md
#
# Parts of this section are required if enabling the 'consent' resource under
# 'listeners', in particular 'template_dir' and 'version'.
#
# 'template_dir' gives the location of the templates for the HTML forms.
# This directory should contain one subdirectory per language (eg, 'en', 'fr'),
# and each language directory should contain the policy document (named as
# '<version>.html') and a success page (success.html).
#
# 'version' specifies the 'current' version of the policy document. It defines
# the version to be served by the consent resource if there is no 'v'
# parameter.
#
# 'server_notice_content', if enabled, will send a user a "Server Notice"
# asking them to consent to the privacy policy. The 'server_notices' section
# must also be configured for this to work. Notices will *not* be sent to
# guest users unless 'send_server_notice_to_guests' is set to true.
#
# 'block_events_error', if set, will block any attempts to send events
# until the user consents to the privacy policy. The value of the setting is
# used as the text of the error.
#
# 'require_at_registration', if enabled, will add a step to the registration
# process, similar to how captcha works. Users will be required to accept the
# policy before their account is created.
#
# 'policy_name' is the display name of the policy users will see when registering
# for an account. Has no effect unless `require_at_registration` is enabled.
# Defaults to "Privacy Policy".
#
#user_consent:
#  template_dir: res/templates/privacy
#  version: 1.0
#  server_notice_content:
#    msgtype: m.text
#    body: >-
#      To continue using this homeserver you must review and agree to the
#      terms and conditions at %(consent_uri)s
#  send_server_notice_to_guests: true
#  block_events_error: >-
#    To continue using this homeserver you must review and agree to the
#    terms and conditions at %(consent_uri)s
#  require_at_registration: false
#  policy_name: Privacy Policy
#



# Settings for local room and user statistics collection. See
# docs/room_and_user_statistics.md.
#
stats:
  # Uncomment the following to disable room and user statistics. Note that doing
  # so may cause certain features (such as the room directory) not to work
  # correctly.
  #
  #enabled: false

  # The size of each timeslice in the room_stats_historical and
  # user_stats_historical tables, as a time period. Defaults to "1d".
  #
  #bucket_size: 1h


# Server Notices room configuration
#
# Uncomment this section to enable a room which can be used to send notices
# from the server to users. It is a special room which cannot be left; notices
# come from a special "notices" user id.
#
# If you uncomment this section, you *must* define the system_mxid_localpart
# setting, which defines the id of the user which will be used to send the
# notices.
#
# It's also possible to override the room name, the display name of the
# "notices" user, and the avatar for the user.
#
#server_notices:
#  system_mxid_localpart: notices
#  system_mxid_display_name: "Server Notices"
#  system_mxid_avatar_url: "mxc://server.com/oumMVlgDnLYFaPVkExemNVVZ"
#  room_name: "Server Notices"



# Uncomment to disable searching the public room list. When disabled
# blocks searching local and remote room lists for local and remote
# users by always returning an empty list for all queries.
#
#enable_room_list_search: false

# The `alias_creation` option controls who's allowed to create aliases
# on this server.
#
# The format of this option is a list of rules that contain globs that
# match against user_id, room_id and the new alias (fully qualified with
# server name). The action in the first rule that matches is taken,
# which can currently either be "allow" or "deny".
#
# Missing user_id/room_id/alias fields default to "*".
#
# If no rules match the request is denied. An empty list means no one
# can create aliases.
#
# Options for the rules include:
#
#   user_id: Matches against the creator of the alias
#   alias: Matches against the alias being created
#   room_id: Matches against the room ID the alias is being pointed at
#   action: Whether to "allow" or "deny" the request if the rule matches
#
# The default is:
#
#alias_creation_rules:
#  - user_id: "*"
#    alias: "*"
#    room_id: "*"
#    action: allow

# The `room_list_publication_rules` option controls who can publish and
# which rooms can be published in the public room list.
#
# The format of this option is the same as that for
# `alias_creation_rules`.
#
# If the room has one or more aliases associated with it, only one of
# the aliases needs to match the alias rule. If there are no aliases
# then only rules with `alias: *` match.
#
# If no rules match the request is denied. An empty list means no one
# can publish rooms.
#
# Options for the rules include:
#
#   user_id: Matches against the creator of the alias
#   room_id: Matches against the room ID being published
#   alias: Matches against any current local or canonical aliases
#            associated with the room
#   action: Whether to "allow" or "deny" the request if the rule matches
#
# The default is:
#
#room_list_publication_rules:
#  - user_id: "*"
#    alias: "*"
#    room_id: "*"
#    action: allow


# Server admins can define a Python module that implements extra rules for
# allowing or denying incoming events. In order to work, this module needs to
# override the methods defined in synapse/events/third_party_rules.py.
#
# This feature is designed to be used in closed federations only, where each
# participating server enforces the same rules.
#
#third_party_event_rules:
#  module: "my_custom_project.SuperRulesSet"
#  config:
#    example_option: 'things'


## Opentracing ##

# These settings enable opentracing, which implements distributed tracing.
# This allows you to observe the causal chains of events across servers
# including requests, key lookups etc., across any server running
# synapse or any other other services which supports opentracing
# (specifically those implemented with Jaeger).
#
opentracing:
    # tracing is disabled by default. Uncomment the following line to enable it.
    #
    #enabled: true

    # The list of homeservers we wish to send and receive span contexts and span baggage.
    # See docs/opentracing.rst.
    #
    # This is a list of regexes which are matched against the server_name of the
    # homeserver.
    #
    # By default, it is empty, so no servers are matched.
    #
    #homeserver_whitelist:
    #  - ".*"

    # A list of the matrix IDs of users whose requests will always be traced,
    # even if the tracing system would otherwise drop the traces due to
    # probabilistic sampling.
    #
    # By default, the list is empty.
    #
    #force_tracing_for_users:
    #  - "@user1:server_name"
    #  - "@user2:server_name"

    # Jaeger can be configured to sample traces at different rates.
    # All configuration options provided by Jaeger can be set here.
    # Jaeger's configuration is mostly related to trace sampling which
    # is documented here:
    # https://www.jaegertracing.io/docs/latest/sampling/.
    #
    #jaeger_config:
    #  sampler:
    #    type: const
    #    param: 1
    #  logging:
    #    false


## Workers ##

# Disables sending of outbound federation transactions on the main process.
# Uncomment if using a federation sender worker.
#
#send_federation: false

# It is possible to run multiple federation sender workers, in which case the
# work is balanced across them.
#
# This configuration must be shared between all federation sender workers, and if
# changed all federation sender workers must be stopped at the same time and then
# started, to ensure that all instances are running with the same config (otherwise
# events may be dropped).
#
#federation_sender_instances:
#  - federation_sender1

# When using workers this should be a map from `worker_name` to the
# HTTP replication listener of the worker, if configured.
#
#instance_map:
#  worker1:
#    host: localhost
#    port: 8034

# Experimental: When using workers you can define which workers should
# handle event persistence and typing notifications. Any worker
# specified here must also be in the `instance_map`.
#
#stream_writers:
#  events: worker1
#  typing: worker1

# The worker that is used to run background tasks (e.g. cleaning up expired
# data). If not provided this defaults to the main process.
#
#run_background_tasks_on: worker1

# A shared secret used by the replication APIs to authenticate HTTP requests
# from workers.
#
# By default this is unused and traffic is not authenticated.
#
#worker_replication_secret: ""


# Configuration for Redis when using workers. This *must* be enabled when
# using workers (unless using old style direct TCP configuration).
#
redis:
  # Uncomment the below to enable Redis support.
  #
  #enabled: true

  # Optional host and port to use to connect to redis. Defaults to
  # localhost and 6379
  #
  #host: localhost
  #port: 6379

  # Optional password if configured on the Redis instance
  #
  #password: <secret_password>

Logging Sample Configuration File

Below is a sample logging configuration file. This file can be tweaked to control how your homeserver will output logs. A restart of the server is generally required to apply any changes made to this file.

Note that the contents below are not intended to be copied and used as the basis for a real homeserver.yaml. Instead, if you are starting from scratch, please generate a fresh config using Synapse by following the instructions in Installation.

# Log configuration for Synapse.
#
# This is a YAML file containing a standard Python logging configuration
# dictionary. See [1] for details on the valid settings.
#
# Synapse also supports structured logging for machine readable logs which can
# be ingested by ELK stacks. See [2] for details.
#
# [1]: https://docs.python.org/3.7/library/logging.config.html#configuration-dictionary-schema
# [2]: https://github.com/matrix-org/synapse/blob/master/docs/structured_logging.md

version: 1

formatters:
    precise:
        format: '%(asctime)s - %(name)s - %(lineno)d - %(levelname)s - %(request)s - %(message)s'

handlers:
    file:
        class: logging.handlers.TimedRotatingFileHandler
        formatter: precise
        filename: /var/log/matrix-synapse/homeserver.log
        when: midnight
        backupCount: 3  # Does not include the current log file.
        encoding: utf8

    # Default to buffering writes to log file for efficiency. This means that
    # will be a delay for INFO/DEBUG logs to get written, but WARNING/ERROR
    # logs will still be flushed immediately.
    buffer:
        class: logging.handlers.MemoryHandler
        target: file
        # The capacity is the number of log lines that are buffered before
        # being written to disk. Increasing this will lead to better
        # performance, at the expensive of it taking longer for log lines to
        # be written to disk.
        capacity: 10
        flushLevel: 30  # Flush for WARNING logs as well

    # A handler that writes logs to stderr. Unused by default, but can be used
    # instead of "buffer" and "file" in the logger handlers.
    console:
        class: logging.StreamHandler
        formatter: precise

loggers:
    synapse.storage.SQL:
        # beware: increasing this to DEBUG will make synapse log sensitive
        # information such as access tokens.
        level: INFO

    twisted:
        # We send the twisted logging directly to the file handler,
        # to work around https://github.com/matrix-org/synapse/issues/3471
        # when using "buffer" logger. Use "console" to log to stderr instead.
        handlers: [file]
        propagate: false

root:
    level: INFO

    # Write logs to the `buffer` handler, which will buffer them together in memory,
    # then write them to a file.
    #
    # Replace "buffer" with "console" to log to stderr instead. (Note that you'll
    # also need to update the configuration for the `twisted` logger above, in
    # this case.)
    #
    handlers: [buffer]

disable_existing_loggers: false
``__`

Structured Logging

A structured logging system can be useful when your logs are destined for a machine to parse and process. By maintaining its machine-readable characteristics, it enables more efficient searching and aggregations when consumed by software such as the "ELK stack".

Synapse's structured logging system is configured via the file that Synapse's log_config config option points to. The file should include a formatter which uses the synapse.logging.TerseJsonFormatter class included with Synapse and a handler which uses the above formatter.

There is also a synapse.logging.JsonFormatter option which does not include a timestamp in the resulting JSON. This is useful if the log ingester adds its own timestamp.

A structured logging configuration looks similar to the following:

version: 1

formatters:
    structured:
        class: synapse.logging.TerseJsonFormatter

handlers:
    file:
        class: logging.handlers.TimedRotatingFileHandler
        formatter: structured
        filename: /path/to/my/logs/homeserver.log
        when: midnight
        backupCount: 3  # Does not include the current log file.
        encoding: utf8

loggers:
    synapse:
        level: INFO
        handlers: [remote]
    synapse.storage.SQL:
        level: WARNING

The above logging config will set Synapse as 'INFO' logging level by default, with the SQL layer at 'WARNING', and will log to a file, stored as JSON.

It is also possible to figure Synapse to log to a remote endpoint by using the synapse.logging.RemoteHandler class included with Synapse. It takes the following arguments:

  • host: Hostname or IP address of the log aggregator.
  • port: Numerical port to contact on the host.
  • maximum_buffer: (Optional, defaults to 1000) The maximum buffer size to allow.

A remote structured logging configuration looks similar to the following:

version: 1

formatters:
    structured:
        class: synapse.logging.TerseJsonFormatter

handlers:
    remote:
        class: synapse.logging.RemoteHandler
        formatter: structured
        host: 10.1.2.3
        port: 9999

loggers:
    synapse:
        level: INFO
        handlers: [remote]
    synapse.storage.SQL:
        level: WARNING

The above logging config will set Synapse as 'INFO' logging level by default, with the SQL layer at 'WARNING', and will log JSON formatted messages to a remote endpoint at 10.1.2.3:9999.

Upgrading from legacy structured logging configuration

Versions of Synapse prior to v1.23.0 included a custom structured logging configuration which is deprecated. It used a structured: true flag and configured drains instead of handlers and formatters.

Synapse currently automatically converts the old configuration to the new configuration, but this will be removed in a future version of Synapse. The following reference can be used to update your configuration. Based on the drain type, we can pick a new handler:

  1. For a type of console, console_json, or console_json_terse: a handler with a class of logging.StreamHandler and a stream of ext://sys.stdout or ext://sys.stderr should be used.
  2. For a type of file or file_json: a handler of logging.FileHandler with a location of the file path should be used.
  3. For a type of network_json_terse: a handler of synapse.logging.RemoteHandler with the host and port should be used.

Then based on the drain type we can pick a new formatter:

  1. For a type of console or file no formatter is necessary.
  2. For a type of console_json or file_json: a formatter of synapse.logging.JsonFormatter should be used.
  3. For a type of console_json_terse or network_json_terse: a formatter of synapse.logging.TerseJsonFormatter should be used.

For each new handler and formatter they should be added to the logging configuration and then assigned to either a logger or the root logger.

An example legacy configuration:

structured: true

loggers:
    synapse:
        level: INFO
    synapse.storage.SQL:
        level: WARNING

drains:
    console:
        type: console
        location: stdout
    file:
        type: file_json
        location: homeserver.log

Would be converted into a new configuration:

version: 1

formatters:
    json:
        class: synapse.logging.JsonFormatter

handlers:
    console:
        class: logging.StreamHandler
        location: ext://sys.stdout
    file:
        class: logging.FileHandler
        formatter: json
        filename: homeserver.log

loggers:
    synapse:
        level: INFO
        handlers: [console, file]
    synapse.storage.SQL:
        level: WARNING

The new logging configuration is a bit more verbose, but significantly more flexible. It allows for configuration that were not previously possible, such as sending plain logs over the network, or using different handlers for different modules.

User Authentication

Synapse supports multiple methods of authenticating users, either out-of-the-box or through custom pluggable authentication modules.

Included in Synapse is support for authenticating users via:

  • A username and password.
  • An email address and password.
  • Single Sign-On through the SAML, Open ID Connect or CAS protocols.
  • JSON Web Tokens.
  • An administrator's shared secret.

Synapse can additionally be extended to support custom authentication schemes through optional "password auth provider" modules.

Configuring Synapse to authenticate against an OpenID Connect provider

Synapse can be configured to use an OpenID Connect Provider (OP) for authentication, instead of its own local password database.

Any OP should work with Synapse, as long as it supports the authorization code flow. There are a few options for that:

  • start a local OP. Synapse has been tested with Hydra and Dex. Note that for an OP to work, it should be served under a secure (HTTPS) origin. A certificate signed with a self-signed, locally trusted CA should work. In that case, start Synapse with a SSL_CERT_FILE environment variable set to the path of the CA.

  • set up a SaaS OP, like Google, Auth0 or Okta. Synapse has been tested with Auth0 and Google.

It may also be possible to use other OAuth2 providers which provide the authorization code grant type, such as Github.

Preparing Synapse

The OpenID integration in Synapse uses the authlib library, which must be installed as follows:

  • The relevant libraries are included in the Docker images and Debian packages provided by matrix.org so no further action is needed.

  • If you installed Synapse into a virtualenv, run /path/to/env/bin/pip install matrix-synapse[oidc] to install the necessary dependencies.

  • For other installation mechanisms, see the documentation provided by the maintainer.

To enable the OpenID integration, you should then add a section to the oidc_providers setting in your configuration file (or uncomment one of the existing examples). See sample_config.yaml for some sample settings, as well as the text below for example configurations for specific providers.

Sample configs

Here are a few configs for providers that should work with Synapse.

Microsoft Azure Active Directory

Azure AD can act as an OpenID Connect Provider. Register a new application under App registrations in the Azure AD management console. The RedirectURI for your application should point to your matrix server: [synapse public baseurl]/_synapse/client/oidc/callback

Go to Certificates & secrets and register a new client secret. Make note of your Directory (tenant) ID as it will be used in the Azure links. Edit your Synapse config file and change the oidc_config section:

oidc_providers:
  - idp_id: microsoft
    idp_name: Microsoft
    issuer: "https://login.microsoftonline.com/<tenant id>/v2.0"
    client_id: "<client id>"
    client_secret: "<client secret>"
    scopes: ["openid", "profile"]
    authorization_endpoint: "https://login.microsoftonline.com/<tenant id>/oauth2/v2.0/authorize"
    token_endpoint: "https://login.microsoftonline.com/<tenant id>/oauth2/v2.0/token"
    userinfo_endpoint: "https://graph.microsoft.com/oidc/userinfo"

    user_mapping_provider:
      config:
        localpart_template: "{{ user.preferred_username.split('@')[0] }}"
        display_name_template: "{{ user.name }}"

Dex

Dex is a simple, open-source, certified OpenID Connect Provider. Although it is designed to help building a full-blown provider with an external database, it can be configured with static passwords in a config file.

Follow the Getting Started guide to install Dex.

Edit examples/config-dev.yaml config file from the Dex repo to add a client:

staticClients:
- id: synapse
  secret: secret
  redirectURIs:
  - '[synapse public baseurl]/_synapse/client/oidc/callback'
  name: 'Synapse'

Run with dex serve examples/config-dev.yaml.

Synapse config:

oidc_providers:
  - idp_id: dex
    idp_name: "My Dex server"
    skip_verification: true # This is needed as Dex is served on an insecure endpoint
    issuer: "http://127.0.0.1:5556/dex"
    client_id: "synapse"
    client_secret: "secret"
    scopes: ["openid", "profile"]
    user_mapping_provider:
      config:
        localpart_template: "{{ user.name }}"
        display_name_template: "{{ user.name|capitalize }}"

Keycloak

Keycloak is an opensource IdP maintained by Red Hat.

Follow the Getting Started Guide to install Keycloak and set up a realm.

  1. Click Clients in the sidebar and click Create

  2. Fill in the fields as below:

FieldValue
Client IDsynapse
Client Protocolopenid-connect
  1. Click Save
  2. Fill in the fields as below:
FieldValue
Client IDsynapse
EnabledOn
Client Protocolopenid-connect
Access Typeconfidential
Valid Redirect URIs[synapse public baseurl]/_synapse/client/oidc/callback
  1. Click Save
  2. On the Credentials tab, update the fields:
FieldValue
Client AuthenticatorClient ID and Secret
  1. Click Regenerate Secret
  2. Copy Secret
oidc_providers:
  - idp_id: keycloak
    idp_name: "My KeyCloak server"
    issuer: "https://127.0.0.1:8443/auth/realms/{realm_name}"
    client_id: "synapse"
    client_secret: "copy secret generated from above"
    scopes: ["openid", "profile"]
    user_mapping_provider:
      config:
        localpart_template: "{{ user.preferred_username }}"
        display_name_template: "{{ user.name }}"

Auth0

  1. Create a regular web application for Synapse

  2. Set the Allowed Callback URLs to [synapse public baseurl]/_synapse/client/oidc/callback

  3. Add a rule to add the preferred_username claim.

    Code sample 
    function addPersistenceAttribute(user, context, callback) {
  user.user_metadata = user.user_metadata || {};
  user.user_metadata.preferred_username = user.user_metadata.preferred_username || user.user_id;
  context.idToken.preferred_username = user.user_metadata.preferred_username;

  auth0.users.updateUserMetadata(user.user_id, user.user_metadata)
    .then(function(){
        callback(null, user, context);
    })
    .catch(function(err){
        callback(err);
    });
}

Synapse config:

oidc_providers:
  - idp_id: auth0
    idp_name: Auth0
    issuer: "https://your-tier.eu.auth0.com/" # TO BE FILLED
    client_id: "your-client-id" # TO BE FILLED
    client_secret: "your-client-secret" # TO BE FILLED
    scopes: ["openid", "profile"]
    user_mapping_provider:
      config:
        localpart_template: "{{ user.preferred_username }}"
        display_name_template: "{{ user.name }}"

GitHub

GitHub is a bit special as it is not an OpenID Connect compliant provider, but just a regular OAuth2 provider.

The /user API endpoint can be used to retrieve information on the authenticated user. As the Synapse login mechanism needs an attribute to uniquely identify users, and that endpoint does not return a sub property, an alternative subject_claim has to be set.

  1. Create a new OAuth application: https://github.com/settings/applications/new.
  2. Set the callback URL to [synapse public baseurl]/_synapse/client/oidc/callback.

Synapse config:

oidc_providers:
  - idp_id: github
    idp_name: Github
    idp_brand: "github"  # optional: styling hint for clients
    discover: false
    issuer: "https://github.com/"
    client_id: "your-client-id" # TO BE FILLED
    client_secret: "your-client-secret" # TO BE FILLED
    authorization_endpoint: "https://github.com/login/oauth/authorize"
    token_endpoint: "https://github.com/login/oauth/access_token"
    userinfo_endpoint: "https://api.github.com/user"
    scopes: ["read:user"]
    user_mapping_provider:
      config:
        subject_claim: "id"
        localpart_template: "{{ user.login }}"
        display_name_template: "{{ user.name }}"

Google

  1. Set up a project in the Google API Console (see https://developers.google.com/identity/protocols/oauth2/openid-connect#appsetup).
  2. add an "OAuth Client ID" for a Web Application under "Credentials".
  3. Copy the Client ID and Client Secret, and add the following to your synapse config: 
    oidc_providers:
  - idp_id: google
    idp_name: Google
    idp_brand: "google"  # optional: styling hint for clients
    issuer: "https://accounts.google.com/"
    client_id: "your-client-id" # TO BE FILLED
    client_secret: "your-client-secret" # TO BE FILLED
    scopes: ["openid", "profile"]
    user_mapping_provider:
      config:
        localpart_template: "{{ user.given_name|lower }}"
        display_name_template: "{{ user.name }}"
  4. Back in the Google console, add this Authorized redirect URI: [synapse public baseurl]/_synapse/client/oidc/callback.

Twitch

  1. Setup a developer account on Twitch
  2. Obtain the OAuth 2.0 credentials by creating an app
  3. Add this OAuth Redirect URL: [synapse public baseurl]/_synapse/client/oidc/callback

Synapse config:

oidc_providers:
  - idp_id: twitch
    idp_name: Twitch
    issuer: "https://id.twitch.tv/oauth2/"
    client_id: "your-client-id" # TO BE FILLED
    client_secret: "your-client-secret" # TO BE FILLED
    client_auth_method: "client_secret_post"
    user_mapping_provider:
      config:
        localpart_template: "{{ user.preferred_username }}"
        display_name_template: "{{ user.name }}"

GitLab

  1. Create a new application.
  2. Add the read_user and openid scopes.
  3. Add this Callback URL: [synapse public baseurl]/_synapse/client/oidc/callback

Synapse config:

oidc_providers:
  - idp_id: gitlab
    idp_name: Gitlab
    idp_brand: "gitlab"  # optional: styling hint for clients
    issuer: "https://gitlab.com/"
    client_id: "your-client-id" # TO BE FILLED
    client_secret: "your-client-secret" # TO BE FILLED
    client_auth_method: "client_secret_post"
    scopes: ["openid", "read_user"]
    user_profile_method: "userinfo_endpoint"
    user_mapping_provider:
      config:
        localpart_template: '{{ user.nickname }}'
        display_name_template: '{{ user.name }}'

Facebook

Like Github, Facebook provide a custom OAuth2 API rather than an OIDC-compliant one so requires a little more configuration.

  1. You will need a Facebook developer account. You can register for one here.
  2. On the apps page of the developer console, "Create App", and choose "Build Connected Experiences".
  3. Once the app is created, add "Facebook Login" and choose "Web". You don't need to go through the whole form here.
  4. In the left-hand menu, open "Products"/"Facebook Login"/"Settings".
    • Add [synapse public baseurl]/_synapse/client/oidc/callback as an OAuth Redirect URL.
  5. In the left-hand menu, open "Settings/Basic". Here you can copy the "App ID" and "App Secret" for use below.

Synapse config:

  - idp_id: facebook
    idp_name: Facebook
    idp_brand: "facebook"  # optional: styling hint for clients
    discover: false
    issuer: "https://facebook.com"
    client_id: "your-client-id" # TO BE FILLED
    client_secret: "your-client-secret" # TO BE FILLED
    scopes: ["openid", "email"]
    authorization_endpoint: https://facebook.com/dialog/oauth
    token_endpoint: https://graph.facebook.com/v9.0/oauth/access_token
    user_profile_method: "userinfo_endpoint"
    userinfo_endpoint: "https://graph.facebook.com/v9.0/me?fields=id,name,email,picture"
    user_mapping_provider:
      config:
        subject_claim: "id"
        display_name_template: "{{ user.name }}"

Relevant documents:

  • https://developers.facebook.com/docs/facebook-login/manually-build-a-login-flow
  • Using Facebook's Graph API: https://developers.facebook.com/docs/graph-api/using-graph-api/
  • Reference to the User endpoint: https://developers.facebook.com/docs/graph-api/reference/user

Gitea

Gitea is, like Github, not an OpenID provider, but just an OAuth2 provider.

The /user API endpoint can be used to retrieve information on the authenticated user. As the Synapse login mechanism needs an attribute to uniquely identify users, and that endpoint does not return a sub property, an alternative subject_claim has to be set.

  1. Create a new application.
  2. Add this Callback URL: [synapse public baseurl]/_synapse/client/oidc/callback

Synapse config:

oidc_providers:
  - idp_id: gitea
    idp_name: Gitea
    discover: false
    issuer: "https://your-gitea.com/"
    client_id: "your-client-id" # TO BE FILLED
    client_secret: "your-client-secret" # TO BE FILLED
    client_auth_method: client_secret_post
    scopes: [] # Gitea doesn't support Scopes
    authorization_endpoint: "https://your-gitea.com/login/oauth/authorize"
    token_endpoint: "https://your-gitea.com/login/oauth/access_token"
    userinfo_endpoint: "https://your-gitea.com/api/v1/user"
    user_mapping_provider:
      config:
        subject_claim: "id"
        localpart_template: "{{ user.login }}"
        display_name_template: "{{ user.full_name }}"

XWiki

Install OpenID Connect Provider extension in your XWiki instance.

Synapse config:

oidc_providers:
  - idp_id: xwiki
    idp_name: "XWiki"
    issuer: "https://myxwikihost/xwiki/oidc/"
    client_id: "your-client-id" # TO BE FILLED
    client_auth_method: none
    scopes: ["openid", "profile"]
    user_profile_method: "userinfo_endpoint"
    user_mapping_provider:
      config:
        localpart_template: "{{ user.preferred_username }}"
        display_name_template: "{{ user.name }}"

Apple

Configuring "Sign in with Apple" (SiWA) requires an Apple Developer account.

You will need to create a new "Services ID" for SiWA, and create and download a private key with "SiWA" enabled.

As well as the private key file, you will need:

  • Client ID: the "identifier" you gave the "Services ID"
  • Team ID: a 10-character ID associated with your developer account.
  • Key ID: the 10-character identifier for the key.

https://help.apple.com/developer-account/?lang=en#/dev77c875b7e has more documentation on setting up SiWA.

The synapse config will look like this:

  - idp_id: apple
    idp_name: Apple
    issuer: "https://appleid.apple.com"
    client_id: "your-client-id" # Set to the "identifier" for your "ServicesID"
    client_auth_method: "client_secret_post"
    client_secret_jwt_key:
      key_file: "/path/to/AuthKey_KEYIDCODE.p8"  # point to your key file
      jwt_header:
        alg: ES256
        kid: "KEYIDCODE"   # Set to the 10-char Key ID
      jwt_payload:
        iss: TEAMIDCODE    # Set to the 10-char Team ID
    scopes: ["name", "email", "openid"]
    authorization_endpoint: https://appleid.apple.com/auth/authorize?response_mode=form_post
    user_mapping_provider:
      config:
        email_template: "{{ user.email }}"

SSO Mapping Providers

A mapping provider is a Python class (loaded via a Python module) that works out how to map attributes of a SSO response to Matrix-specific user attributes. Details such as user ID localpart, displayname, and even avatar URLs are all things that can be mapped from talking to a SSO service.

As an example, a SSO service may return the email address "john.smith@example.com" for a user, whereas Synapse will need to figure out how to turn that into a displayname when creating a Matrix user for this individual. It may choose John Smith, or Smith, John [Example.com] or any number of variations. As each Synapse configuration may want something different, this is where SAML mapping providers come into play.

SSO mapping providers are currently supported for OpenID and SAML SSO configurations. Please see the details below for how to implement your own.

It is up to the mapping provider whether the user should be assigned a predefined Matrix ID based on the SSO attributes, or if the user should be allowed to choose their own username.

In the first case - where users are automatically allocated a Matrix ID - it is the responsibility of the mapping provider to normalise the SSO attributes and map them to a valid Matrix ID. The specification for Matrix IDs has some information about what is considered valid.

If the mapping provider does not assign a Matrix ID, then Synapse will automatically serve an HTML page allowing the user to pick their own username.

External mapping providers are provided to Synapse in the form of an external Python module. You can retrieve this module from PyPI or elsewhere, but it must be importable via Synapse (e.g. it must be in the same virtualenv as Synapse). The Synapse config is then modified to point to the mapping provider (and optionally provide additional configuration for it).

OpenID Mapping Providers

The OpenID mapping provider can be customized by editing the oidc_config.user_mapping_provider.module config option.

oidc_config.user_mapping_provider.config allows you to provide custom configuration options to the module. Check with the module's documentation for what options it provides (if any). The options listed by default are for the user mapping provider built in to Synapse. If using a custom module, you should comment these options out and use those specified by the module instead.

Building a Custom OpenID Mapping Provider

A custom mapping provider must specify the following methods:

  • __init__(self, parsed_config)
    • Arguments:
      • parsed_config - A configuration object that is the return value of the parse_config method. You should set any configuration options needed by the module here.
  • parse_config(config)
    • This method should have the @staticmethod decoration.
    • Arguments:
      • config - A dict representing the parsed content of the oidc_config.user_mapping_provider.config homeserver config option. Runs on homeserver startup. Providers should extract and validate any option values they need here.
    • Whatever is returned will be passed back to the user mapping provider module's __init__ method during construction.
  • get_remote_user_id(self, userinfo)
    • Arguments:
      • userinfo - A authlib.oidc.core.claims.UserInfo object to extract user information from.
    • This method must return a string, which is the unique, immutable identifier for the user. Commonly the sub claim of the response.
  • map_user_attributes(self, userinfo, token, failures)
    • This method must be async.
    • Arguments:
      • userinfo - A authlib.oidc.core.claims.UserInfo object to extract user information from.
      • token - A dictionary which includes information necessary to make further requests to the OpenID provider.
      • failures - An int that represents the amount of times the returned mxid localpart mapping has failed. This should be used to create a deduplicated mxid localpart which should be returned instead. For example, if this method returns john.doe as the value of localpart in the returned dict, and that is already taken on the homeserver, this method will be called again with the same parameters but with failures=1. The method should then return a different localpart value, such as john.doe1.
    • Returns a dictionary with two keys:
      • localpart: A string, used to generate the Matrix ID. If this is None, the user is prompted to pick their own username. This is only used during a user's first login. Once a localpart has been associated with a remote user ID (see get_remote_user_id) it cannot be updated.
      • displayname: An optional string, the display name for the user.
  • get_extra_attributes(self, userinfo, token)

    • This method must be async.

    • Arguments:

      • userinfo - A authlib.oidc.core.claims.UserInfo object to extract user information from.
      • token - A dictionary which includes information necessary to make further requests to the OpenID provider.

    • Returns a dictionary that is suitable to be serialized to JSON. This will be returned as part of the response during a successful login.

      Note that care should be taken to not overwrite any of the parameters usually returned as part of the login response.

Default OpenID Mapping Provider

Synapse has a built-in OpenID mapping provider if a custom provider isn't specified in the config. It is located at synapse.handlers.oidc.JinjaOidcMappingProvider.

SAML Mapping Providers

The SAML mapping provider can be customized by editing the saml2_config.user_mapping_provider.module config option.

saml2_config.user_mapping_provider.config allows you to provide custom configuration options to the module. Check with the module's documentation for what options it provides (if any). The options listed by default are for the user mapping provider built in to Synapse. If using a custom module, you should comment these options out and use those specified by the module instead.

Building a Custom SAML Mapping Provider

A custom mapping provider must specify the following methods:

  • __init__(self, parsed_config, module_api)
    • Arguments:
      • parsed_config - A configuration object that is the return value of the parse_config method. You should set any configuration options needed by the module here.
      • module_api - a synapse.module_api.ModuleApi object which provides the stable API available for extension modules.
  • parse_config(config)
    • This method should have the @staticmethod decoration.
    • Arguments:
      • config - A dict representing the parsed content of the saml_config.user_mapping_provider.config homeserver config option. Runs on homeserver startup. Providers should extract and validate any option values they need here.
    • Whatever is returned will be passed back to the user mapping provider module's __init__ method during construction.
  • get_saml_attributes(config)
    • This method should have the @staticmethod decoration.
    • Arguments:
      • config - A object resulting from a call to parse_config.
    • Returns a tuple of two sets. The first set equates to the SAML auth response attributes that are required for the module to function, whereas the second set consists of those attributes which can be used if available, but are not necessary.
  • get_remote_user_id(self, saml_response, client_redirect_url)
    • Arguments:
      • saml_response - A saml2.response.AuthnResponse object to extract user information from.
      • client_redirect_url - A string, the URL that the client will be redirected to.
    • This method must return a string, which is the unique, immutable identifier for the user. Commonly the uid claim of the response.
  • saml_response_to_user_attributes(self, saml_response, failures, client_redirect_url)

    • Arguments:

      • saml_response - A saml2.response.AuthnResponse object to extract user information from.
      • failures - An int that represents the amount of times the returned mxid localpart mapping has failed. This should be used to create a deduplicated mxid localpart which should be returned instead. For example, if this method returns john.doe as the value of mxid_localpart in the returned dict, and that is already taken on the homeserver, this method will be called again with the same parameters but with failures=1. The method should then return a different mxid_localpart value, such as john.doe1.
      • client_redirect_url - A string, the URL that the client will be redirected to.

    • This method must return a dictionary, which will then be used by Synapse to build a new user. The following keys are allowed:

      • mxid_localpart - A string, the mxid localpart of the new user. If this is None, the user is prompted to pick their own username. This is only used during a user's first login. Once a localpart has been associated with a remote user ID (see get_remote_user_id) it cannot be updated.
      • displayname - The displayname of the new user. If not provided, will default to the value of mxid_localpart.
      • emails - A list of emails for the new user. If not provided, will default to an empty list.

      Alternatively it can raise a synapse.api.errors.RedirectException to redirect the user to another page. This is useful to prompt the user for additional information, e.g. if you want them to provide their own username. It is the responsibility of the mapping provider to either redirect back to client_redirect_url (including any additional information) or to complete registration using methods from the ModuleApi.

Default SAML Mapping Provider

Synapse has a built-in SAML mapping provider if a custom provider isn't specified in the config. It is located at synapse.handlers.saml.DefaultSamlMappingProvider.

Password auth provider modules

Password auth providers offer a way for server administrators to integrate their Synapse installation with an existing authentication system.

A password auth provider is a Python class which is dynamically loaded into Synapse, and provides a number of methods by which it can integrate with the authentication system.

This document serves as a reference for those looking to implement their own password auth providers. Additionally, here is a list of known password auth provider module implementations:

Required methods

Password auth provider classes must provide the following methods:

  • parse_config(config) This method is passed the config object for this module from the homeserver configuration file.

    It should perform any appropriate sanity checks on the provided configuration, and return an object which is then passed into __init__.

    This method should have the @staticmethod decoration.

  • __init__(self, config, account_handler)

    The constructor is passed the config object returned by parse_config, and a synapse.module_api.ModuleApi object which allows the password provider to check if accounts exist and/or create new ones.

Optional methods

Password auth provider classes may optionally provide the following methods:

  • get_db_schema_files(self)

    This method, if implemented, should return an Iterable of (name, stream) pairs of database schema files. Each file is applied in turn at initialisation, and a record is then made in the database so that it is not re-applied on the next start.

  • get_supported_login_types(self)

    This method, if implemented, should return a dict mapping from a login type identifier (such as m.login.password) to an iterable giving the fields which must be provided by the user in the submission to the /login API. These fields are passed in the login_dict dictionary to check_auth.

    For example, if a password auth provider wants to implement a custom login type of com.example.custom_login, where the client is expected to pass the fields secret1 and secret2, the provider should implement this method and return the following dict:

    {"com.example.custom_login": ("secret1", "secret2")}

  • check_auth(self, username, login_type, login_dict)

    This method does the real work. If implemented, it will be called for each login attempt where the login type matches one of the keys returned by get_supported_login_types.

    It is passed the (possibly unqualified) user field provided by the client, the login type, and a dictionary of login secrets passed by the client.

    The method should return an Awaitable object, which resolves to the canonical @localpart:domain user ID if authentication is successful, and None if not.

    Alternatively, the Awaitable can resolve to a (str, func) tuple, in which case the second field is a callback which will be called with the result from the /login call (including access_token, device_id, etc.)

  • check_3pid_auth(self, medium, address, password)

    This method, if implemented, is called when a user attempts to register or log in with a third party identifier, such as email. It is passed the medium (ex. "email"), an address (ex. "jdoe@example.com") and the user's password.

    The method should return an Awaitable object, which resolves to a str containing the user's (canonical) User id if authentication was successful, and None if not.

    As with check_auth, the Awaitable may alternatively resolve to a (user_id, callback) tuple.

  • check_password(self, user_id, password)

    This method provides a simpler interface than get_supported_login_types and check_auth for password auth providers that just want to provide a mechanism for validating m.login.password logins.

    If implemented, it will be called to check logins with an m.login.password login type. It is passed a qualified @localpart:domain user id, and the password provided by the user.

    The method should return an Awaitable object, which resolves to True if authentication is successful, and False if not.

  • on_logged_out(self, user_id, device_id, access_token)

    This method, if implemented, is called when a user logs out. It is passed the qualified user ID, the ID of the deactivated device (if any: access tokens are occasionally created without an associated device ID), and the (now deactivated) access token.

    It may return an Awaitable object; the logout request will wait for the Awaitable to complete, but the result is ignored.

JWT Login Type

Synapse comes with a non-standard login type to support JSON Web Tokens. In general the documentation for the login endpoint is still valid (and the mechanism works similarly to the token based login).

To log in using a JSON Web Token, clients should submit a /login request as follows:

{
  "type": "org.matrix.login.jwt",
  "token": "<jwt>"
}

Note that the login type of m.login.jwt is supported, but is deprecated. This will be removed in a future version of Synapse.

The token field should include the JSON web token with the following claims:

  • The sub (subject) claim is required and should encode the local part of the user ID.
  • The expiration time (exp), not before time (nbf), and issued at (iat) claims are optional, but validated if present.
  • The issuer (iss) claim is optional, but required and validated if configured.
  • The audience (aud) claim is optional, but required and validated if configured. Providing the audience claim when not configured will cause validation to fail.

In the case that the token is not valid, the homeserver must respond with 403 Forbidden and an error code of M_FORBIDDEN.

As with other login types, there are additional fields (e.g. device_id and initial_device_display_name) which can be included in the above request.

Preparing Synapse

The JSON Web Token integration in Synapse uses the PyJWT library, which must be installed as follows:

  • The relevant libraries are included in the Docker images and Debian packages provided by matrix.org so no further action is needed.

  • If you installed Synapse into a virtualenv, run /path/to/env/bin/pip install synapse[pyjwt] to install the necessary dependencies.

  • For other installation mechanisms, see the documentation provided by the maintainer.

To enable the JSON web token integration, you should then add an jwt_config section to your configuration file (or uncomment the enabled: true line in the existing section). See sample_config.yaml for some sample settings.

How to test JWT as a developer

Although JSON Web Tokens are typically generated from an external server, the examples below use PyJWT directly.

  1. Configure Synapse with JWT logins, note that this example uses a pre-shared secret and an algorithm of HS256:

    jwt_config:
    enabled: true
    secret: "my-secret-token"
    algorithm: "HS256"

  2. Generate a JSON web token:

    $ pyjwt --key=my-secret-token --alg=HS256 encode sub=test-user
eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJ0ZXN0LXVzZXIifQ.Ag71GT8v01UO3w80aqRPTeuVPBIBZkYhNTJJ-_-zQIc

  3. Query for the login types and ensure org.matrix.login.jwt is there:

    curl http://localhost:8080/_matrix/client/r0/login

  4. Login used the generated JSON web token from above:

    $ curl http://localhost:8082/_matrix/client/r0/login -X POST \
    --data '{"type":"org.matrix.login.jwt","token":"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJ0ZXN0LXVzZXIifQ.Ag71GT8v01UO3w80aqRPTeuVPBIBZkYhNTJJ-_-zQIc"}'
{
    "access_token": "<access token>",
    "device_id": "ACBDEFGHI",
    "home_server": "localhost:8080",
    "user_id": "@test-user:localhost:8480"
}

You should now be able to use the returned access token to query the client API.

Overview

A captcha can be enabled on your homeserver to help prevent bots from registering accounts. Synapse currently uses Google's reCAPTCHA service which requires API keys from Google.

Getting API keys

  1. Create a new site at https://www.google.com/recaptcha/admin/create
  2. Set the label to anything you want
  3. Set the type to reCAPTCHA v2 using the "I'm not a robot" Checkbox option. This is the only type of captcha that works with Synapse.
  4. Add the public hostname for your server, as set in public_baseurl in homeserver.yaml, to the list of authorized domains. If you have not set public_baseurl, use server_name.
  5. Agree to the terms of service and submit.
  6. Copy your site key and secret key and add them to your homeserver.yaml configuration file 
    recaptcha_public_key: YOUR_SITE_KEY
recaptcha_private_key: YOUR_SECRET_KEY
  7. Enable the CAPTCHA for new registrations 
    enable_registration_captcha: true
  8. Go to the settings page for the CAPTCHA you just created
  9. Uncheck the "Verify the origin of reCAPTCHA solutions" checkbox so that the captcha can be displayed in any client. If you do not disable this option then you must specify the domains of every client that is allowed to display the CAPTCHA.

Configuring IP used for auth

The reCAPTCHA API requires that the IP address of the user who solved the CAPTCHA is sent. If the client is connecting through a proxy or load balancer, it may be required to use the X-Forwarded-For (XFF) header instead of the origin IP address. This can be configured using the x_forwarded directive in the listeners section of the homeserver.yaml configuration file.

Registering an Application Service

The registration of new application services depends on the homeserver used. In synapse, you need to create a new configuration file for your AS and add it to the list specified under the app_service_config_files config option in your synapse config.

For example:

app_service_config_files:
- /home/matrix/.synapse/<your-AS>.yaml

The format of the AS configuration file is as follows:

url: <base url of AS>
as_token: <token AS will add to requests to HS>
hs_token: <token HS will add to requests to AS>
sender_localpart: <localpart of AS user>
namespaces:
  users:  # List of users we're interested in
    - exclusive: <bool>
      regex: <regex>
      group_id: <group>
    - ...
  aliases: []  # List of aliases we're interested in
  rooms: [] # List of room ids we're interested in

exclusive: If enabled, only this application service is allowed to register users in its namespace(s). group_id: All users of this application service are dynamically joined to this group. This is useful for e.g user organisation or flairs.

See the spec for further details on how application services work.

Server Notices

'Server Notices' are a new feature introduced in Synapse 0.30. They provide a channel whereby server administrators can send messages to users on the server.

They are used as part of communication of the server polices(see consent_tracking.md), however the intention is that they may also find a use for features such as "Message of the day".

This is a feature specific to Synapse, but it uses standard Matrix communication mechanisms, so should work with any Matrix client.

User experience

When the user is first sent a server notice, they will get an invitation to a room (typically called 'Server Notices', though this is configurable in homeserver.yaml). They will be unable to reject this invitation - attempts to do so will receive an error.

Once they accept the invitation, they will see the notice message in the room history; it will appear to have come from the 'server notices user' (see below).

The user is prevented from sending any messages in this room by the power levels.

Having joined the room, the user can leave the room if they want. Subsequent server notices will then cause a new room to be created.

Synapse configuration

Server notices come from a specific user id on the server. Server administrators are free to choose the user id - something like server is suggested, meaning the notices will come from @server:<your_server_name>. Once the Server Notices user is configured, that user id becomes a special, privileged user, so administrators should ensure that it is not already allocated.

In order to support server notices, it is necessary to add some configuration to the homeserver.yaml file. In particular, you should add a server_notices section, which should look like this:

server_notices:
   system_mxid_localpart: server
   system_mxid_display_name: "Server Notices"
   system_mxid_avatar_url: "mxc://server.com/oumMVlgDnLYFaPVkExemNVVZ"
   room_name: "Server Notices"

The only compulsory setting is system_mxid_localpart, which defines the user id of the Server Notices user, as above. room_name defines the name of the room which will be created.

system_mxid_display_name and system_mxid_avatar_url can be used to set the displayname and avatar of the Server Notices user.

Sending notices

To send server notices to users you can use the admin_api.

Support in Synapse for tracking agreement to server terms and conditions

Synapse 0.30 introduces support for tracking whether users have agreed to the terms and conditions set by the administrator of a server - and blocking access to the server until they have.

There are several parts to this functionality; each requires some specific configuration in homeserver.yaml to be enabled.

Note that various parts of the configuation and this document refer to the "privacy policy": agreement with a privacy policy is one particular use of this feature, but of course adminstrators can specify other terms and conditions unrelated to "privacy" per se.

Collecting policy agreement from a user

Synapse can be configured to serve the user a simple policy form with an "accept" button. Clicking "Accept" records the user's acceptance in the database and shows a success page.

To enable this, first create templates for the policy and success pages. These should be stored on the local filesystem.

These templates use the Jinja2 templating language, and docs/privacy_policy_templates gives examples of the sort of thing that can be done.

Note that the templates must be stored under a name giving the language of the template - currently this must always be en (for "English"); internationalisation support is intended for the future.

The template for the policy itself should be versioned and named according to the version: for example 1.0.html. The version of the policy which the user has agreed to is stored in the database.

Once the templates are in place, make the following changes to homeserver.yaml:

  1. Add a user_consent section, which should look like:

    user_consent:
  template_dir: privacy_policy_templates
  version: 1.0

    template_dir points to the directory containing the policy templates. version defines the version of the policy which will be served to the user. In the example above, Synapse will serve privacy_policy_templates/en/1.0.html.

  2. Add a form_secret setting at the top level:

    form_secret: "<unique secret>"

    This should be set to an arbitrary secret string (try pwgen -y 30 to generate suitable secrets).

    More on what this is used for below.

  3. Add consent wherever the client resource is currently enabled in the listeners configuration. For example:

    listeners:
  - port: 8008
    resources:
      - names:
        - client
        - consent

Finally, ensure that jinja2 is installed. If you are using a virtualenv, this should be a matter of pip install Jinja2. On debian, try apt-get install python-jinja2.

Once this is complete, and the server has been restarted, try visiting https://<server>/_matrix/consent. If correctly configured, this should give an error "Missing string query parameter 'u'". It is now possible to manually construct URIs where users can give their consent.

  1. Add the following to your configuration:

    user_consent:
  require_at_registration: true
  policy_name: "Privacy Policy" # or whatever you'd like to call the policy

  2. In your consent templates, make use of the public_version variable to see if an unauthenticated user is viewing the page. This is typically wrapped around the form that would be used to actually agree to the document:

    {% if not public_version %}
  <!-- The variables used here are only provided when the 'u' param is given to the homeserver -->
  <form method="post" action="consent">
    <input type="hidden" name="v" value="{{version}}"/>
    <input type="hidden" name="u" value="{{user}}"/>
    <input type="hidden" name="h" value="{{userhmac}}"/>
    <input type="submit" value="Sure thing!"/>
  </form>
{% endif %}

  3. Restart Synapse to apply the changes.

Visiting https://<server>/_matrix/consent should now give you a view of the privacy document. This is what users will be able to see when registering for accounts.

It may be useful to manually construct the "consent URI" for a given user - for instance, in order to send them an email asking them to consent. To do this, take the base https://<server>/_matrix/consent URL and add the following query parameters:

  • u: the user id of the user. This can either be a full MXID (@user:server.com) or just the localpart (user).

  • h: hex-encoded HMAC-SHA256 of u using the form_secret as a key. It is possible to calculate this on the commandline with something like:

    echo -n '<user>' | openssl sha256 -hmac '<form_secret>'

    This should result in a URI which looks something like: https://<server>/_matrix/consent?u=<user>&h=68a152465a4d....

Note that not providing a u parameter will be interpreted as wanting to view the document from an unauthenticated perspective, such as prior to registration. Therefore, the h parameter is not required in this scenario. To enable this behaviour, set require_at_registration to true in your user_consent config.

Sending users a server notice asking them to agree to the policy

It is possible to configure Synapse to send a server notice to anybody who has not yet agreed to the current version of the policy. To do so:

  • ensure that the consent resource is configured, as in the previous section

  • ensure that server notices are configured, as in server_notices.md.

  • Add server_notice_content under user_consent in homeserver.yaml. For example:

    user_consent:
  server_notice_content:
    msgtype: m.text
    body: >-
      Please give your consent to the privacy policy at %(consent_uri)s.

    Synapse automatically replaces the placeholder %(consent_uri)s with the consent uri for that user.

  • ensure that public_baseurl is set in homeserver.yaml, and gives the base URI that clients use to connect to the server. (It is used to construct consent_uri in the server notice.)

Blocking users from using the server until they agree to the policy

Synapse can be configured to block any attempts to join rooms or send messages until the user has given their agreement to the policy. (Joining the server notices room is exempted from this).

To enable this, add block_events_error under user_consent. For example:

user_consent:
  block_events_error: >-
    You can't send any messages until you consent to the privacy policy at
    %(consent_uri)s.

Synapse automatically replaces the placeholder %(consent_uri)s with the consent uri for that user.

ensure that public_baseurl is set in homeserver.yaml, and gives the base URI that clients use to connect to the server. (It is used to construct consent_uri in the error.)

URL Previews

Design notes on a URL previewing service for Matrix:

Options are:

  1. Have an AS which listens for URLs, downloads them, and inserts an event that describes their metadata.
  • Pros:
    • Decouples the implementation entirely from Synapse.
    • Uses existing Matrix events & content repo to store the metadata.
  • Cons:
    • Which AS should provide this service for a room, and why should you trust it?
    • Doesn't work well with E2E; you'd have to cut the AS into every room
    • the AS would end up subscribing to every room anyway.
  1. Have a generic preview API (nothing to do with Matrix) that provides a previewing service:
  • Pros:
    • Simple and flexible; can be used by any clients at any point
  • Cons:
    • If each HS provides one of these independently, all the HSes in a room may needlessly DoS the target URI
    • We need somewhere to store the URL metadata rather than just using Matrix itself
    • We can't piggyback on matrix to distribute the metadata between HSes.
  1. Make the synapse of the sending user responsible for spidering the URL and inserting an event asynchronously which describes the metadata.
  • Pros:
    • Works transparently for all clients
    • Piggy-backs nicely on using Matrix for distributing the metadata.
    • No confusion as to which AS
  • Cons:
    • Doesn't work with E2E
    • We might want to decouple the implementation of the spider from the HS, given spider behaviour can be quite complicated and evolve much more rapidly than the HS. It's more like a bot than a core part of the server.
  1. Make the sending client use the preview API and insert the event itself when successful.
  • Pros:
    • Works well with E2E
    • No custom server functionality
    • Lets the client customise the preview that they send (like on FB)
  • Cons:
    • Entirely specific to the sending client, whereas it'd be nice if /any/ URL was correctly previewed if clients support it.
  1. Have the option of specifying a shared (centralised) previewing service used by a room, to avoid all the different HSes in the room DoSing the target.

Best solution is probably a combination of both 2 and 4.

  • Sending clients do their best to create and send a preview at the point of sending the message, perhaps delaying the message until the preview is computed? (This also lets the user validate the preview before sending)
  • Receiving clients have the option of going and creating their own preview if one doesn't arrive soon enough (or if the original sender didn't create one)

This is a bit magical though in that the preview could come from two entirely different sources - the sending HS or your local one. However, this can always be exposed to users: "Generate your own URL previews if none are available?"

This is tantamount also to senders calculating their own thumbnails for sending in advance of the main content - we are trusting the sender not to lie about the content in the thumbnail. Whereas currently thumbnails are calculated by the receiving homeserver to avoid this attack.

However, this kind of phishing attack does exist whether we let senders pick their thumbnails or not, in that a malicious sender can send normal text messages around the attachment claiming it to be legitimate. We could rely on (future) reputation/abuse management to punish users who phish (be it with bogus metadata or bogus descriptions). Bogus metadata is particularly bad though, especially if it's avoidable.

As a first cut, let's do #2 and have the receiver hit the API to calculate its own previews (as it does currently for image thumbnails). We can then extend/optimise this to option 4 as a special extra if needed.

API

GET /_matrix/media/r0/preview_url?url=http://wherever.com
200 OK
{
    "og:type"        : "article"
    "og:url"         : "https://twitter.com/matrixdotorg/status/684074366691356672"
    "og:title"       : "Matrix on Twitter"
    "og:image"       : "https://pbs.twimg.com/profile_images/500400952029888512/yI0qtFi7_400x400.png"
    "og:description" : "“Synapse 0.12 is out! Lots of polishing, performance &amp;amp; bugfixes: /sync API, /r0 prefix, fulltext search, 3PID invites https://t.co/5alhXLLEGP”"
    "og:site_name"   : "Twitter"
}
  • Downloads the URL
    • If HTML, just stores it in RAM and parses it for OG meta tags
      • Download any media OG meta tags to the media repo, and refer to them in the OG via mxc:// URIs.
    • If a media filetype we know we can thumbnail: store it on disk, and hand it to the thumbnailer. Generate OG meta tags from the thumbnailer contents.
    • Otherwise, don't bother downloading further.

User Directory API Implementation

The user directory is currently maintained based on the 'visible' users on this particular server - i.e. ones which your account shares a room with, or who are present in a publicly viewable room present on the server.

The directory info is stored in various tables, which can (typically after DB corruption) get stale or out of sync. If this happens, for now the solution to fix it is to execute the SQL here and then restart synapse. This should then start a background task to flush the current tables and regenerate the directory.

Message retention policies

Synapse admins can enable support for message retention policies on their homeserver. Message retention policies exist at a room level, follow the semantics described in MSC1763, and allow server and room admins to configure how long messages should be kept in a homeserver's database before being purged from it. Please note that, as this feature isn't part of the Matrix specification yet, this implementation is to be considered as experimental.

A message retention policy is mainly defined by its max_lifetime parameter, which defines how long a message can be kept around after it was sent to the room. If a room doesn't have a message retention policy, and there's no default one for a given server, then no message sent in that room is ever purged on that server.

MSC1763 also specifies semantics for a min_lifetime parameter which defines the amount of time after which an event can get purged (after it was sent to the room), but Synapse doesn't currently support it beyond registering it.

Both max_lifetime and min_lifetime are optional parameters.

Note that message retention policies don't apply to state events.

Once an event reaches its expiry date (defined as the time it was sent plus the value for max_lifetime in the room), two things happen:

  • Synapse stops serving the event to clients via any endpoint.
  • The message gets picked up by the next purge job (see the "Purge jobs" section) and is removed from Synapse's database.

Since purge jobs don't run continuously, this means that an event might stay in a server's database for longer than the value for max_lifetime in the room would allow, though hidden from clients.

Similarly, if a server (with support for message retention policies enabled) receives from another server an event that should have been purged according to its room's policy, then the receiving server will process and store that event until it's picked up by the next purge job, though it will always hide it from clients.

Synapse requires at least one message in each room, so it will never delete the last message in a room. It will, however, hide it from clients.

Server configuration

Support for this feature can be enabled and configured in the retention section of the Synapse configuration file (see the sample file).

To enable support for message retention policies, set the setting enabled in this section to true.

Default policy

A default message retention policy is a policy defined in Synapse's configuration that is used by Synapse for every room that doesn't have a message retention policy configured in its state. This allows server admins to ensure that messages are never kept indefinitely in a server's database.

A default policy can be defined as such, in the retention section of the configuration file:

  default_policy:
    min_lifetime: 1d
    max_lifetime: 1y

Here, min_lifetime and max_lifetime have the same meaning and level of support as previously described. They can be expressed either as a duration (using the units s (seconds), m (minutes), h (hours), d (days), w (weeks) and y (years)) or as a number of milliseconds.

Purge jobs

Purge jobs are the jobs that Synapse runs in the background to purge expired events from the database. They are only run if support for message retention policies is enabled in the server's configuration. If no configuration for purge jobs is configured by the server admin, Synapse will use a default configuration, which is described in the sample configuration file.

Some server admins might want a finer control on when events are removed depending on an event's room's policy. This can be done by setting the purge_jobs sub-section in the retention section of the configuration file. An example of such configuration could be:

  purge_jobs:
    - longest_max_lifetime: 3d
      interval: 12h
    - shortest_max_lifetime: 3d
      longest_max_lifetime: 1w
      interval: 1d
    - shortest_max_lifetime: 1w
      interval: 2d

In this example, we define three jobs:

  • one that runs twice a day (every 12 hours) and purges events in rooms which policy's max_lifetime is lower or equal to 3 days.
  • one that runs once a day and purges events in rooms which policy's max_lifetime is between 3 days and a week.
  • one that runs once every 2 days and purges events in rooms which policy's max_lifetime is greater than a week.

Note that this example is tailored to show different configurations and features slightly more jobs than it's probably necessary (in practice, a server admin would probably consider it better to replace the two last jobs with one that runs once a day and handles rooms which which policy's max_lifetime is greater than 3 days).

Keep in mind, when configuring these jobs, that a purge job can become quite heavy on the server if it targets many rooms, therefore prefer having jobs with a low interval that target a limited set of rooms. Also make sure to include a job with no minimum and one with no maximum to make sure your configuration handles every policy.

As previously mentioned in this documentation, while a purge job that runs e.g. every day means that an expired event might stay in the database for up to a day after its expiry, Synapse hides expired events from clients as soon as they expire, so the event is not visible to local users between its expiry date and the moment it gets purged from the server's database.

Lifetime limits

Server admins can set limits on the values of max_lifetime to use when purging old events in a room. These limits can be defined as such in the retention section of the configuration file:

  allowed_lifetime_min: 1d
  allowed_lifetime_max: 1y

The limits are considered when running purge jobs. If necessary, the effective value of max_lifetime will be brought between allowed_lifetime_min and allowed_lifetime_max (inclusive). This means that, if the value of max_lifetime defined in the room's state is lower than allowed_lifetime_min, the value of allowed_lifetime_min will be used instead. Likewise, if the value of max_lifetime is higher than allowed_lifetime_max, the value of allowed_lifetime_max will be used instead.

In the example above, we ensure Synapse never deletes events that are less than one day old, and that it always deletes events that are over a year old.

If a default policy is set, and its max_lifetime value is lower than allowed_lifetime_min or higher than allowed_lifetime_max, the same process applies.

Both parameters are optional; if one is omitted Synapse won't use it to adjust the effective value of max_lifetime.

Like other settings in this section, these parameters can be expressed either as a duration or as a number of milliseconds.

Room configuration

To configure a room's message retention policy, a room's admin or moderator needs to send a state event in that room with the type m.room.retention and the following content:

{
    "max_lifetime": ...
}

In this event's content, the max_lifetime parameter has the same meaning as previously described, and needs to be expressed in milliseconds. The event's content can also include a min_lifetime parameter, which has the same meaning and limited support as previously described.

Note that over every server in the room, only the ones with support for message retention policies will actually remove expired events. This support is currently not enabled by default in Synapse.

Note on reclaiming disk space

While purge jobs actually delete data from the database, the disk space used by the database might not decrease immediately on the database's host. However, even though the database engine won't free up the disk space, it will start writing new data into where the purged data was.

If you want to reclaim the freed disk space anyway and return it to the operating system, the server admin needs to run VACUUM FULL; (or VACUUM; for SQLite databases) on Synapse's database (see the related PostgreSQL documentation).

Modules

Synapse supports extending its functionality by configuring external modules.

Using modules

To use a module on Synapse, add it to the modules section of the configuration file:

modules:
  - module: my_super_module.MySuperClass
    config:
      do_thing: true
  - module: my_other_super_module.SomeClass
    config: {}

Each module is defined by a path to a Python class as well as a configuration. This information for a given module should be available in the module's own documentation.

Note: When using third-party modules, you effectively allow someone else to run custom code on your Synapse homeserver. Server admins are encouraged to verify the provenance of the modules they use on their homeserver and make sure the modules aren't running malicious code on their instance.

Also note that we are currently in the process of migrating module interfaces to this system. While some interfaces might be compatible with it, others still require configuring modules in another part of Synapse's configuration file. Currently, only the spam checker interface is compatible with this new system.

Writing a module

A module is a Python class that uses Synapse's module API to interact with the homeserver. It can register callbacks that Synapse will call on specific operations, as well as web resources to attach to Synapse's web server.

When instantiated, a module is given its parsed configuration as well as an instance of the synapse.module_api.ModuleApi class. The configuration is a dictionary, and is either the output of the module's parse_config static method (see below), or the configuration associated with the module in Synapse's configuration file.

See the documentation for the ModuleApi class here.

Handling the module's configuration

A module can implement the following static method:

@staticmethod
def parse_config(config: dict) -> dict

This method is given a dictionary resulting from parsing the YAML configuration for the module. It may modify it (for example by parsing durations expressed as strings (e.g. "5d") into milliseconds, etc.), and return the modified dictionary. It may also verify that the configuration is correct, and raise an instance of synapse.module_api.errors.ConfigError if not.

Registering a web resource

Modules can register web resources onto Synapse's web server using the following module API method:

def ModuleApi.register_web_resource(path: str, resource: IResource)

The path is the full absolute path to register the resource at. For example, if you register a resource for the path /_synapse/client/my_super_module/say_hello, Synapse will serve it at http(s)://[HS_URL]/_synapse/client/my_super_module/say_hello. Note that Synapse does not allow registering resources for several sub-paths in the /_matrix namespace (such as anything under /_matrix/client for example). It is strongly recommended that modules register their web resources under the /_synapse/client namespace.

The provided resource is a Python class that implements Twisted's IResource interface (such as Resource).

Only one resource can be registered for a given path. If several modules attempt to register a resource for the same path, the module that appears first in Synapse's configuration file takes priority.

Modules must register their web resources in their __init__ method.

Registering a callback

Modules can use Synapse's module API to register callbacks. Callbacks are functions that Synapse will call when performing specific actions. Callbacks must be asynchronous, and are split in categories. A single module may implement callbacks from multiple categories, and is under no obligation to implement all callbacks from the categories it registers callbacks for.

Spam checker callbacks

To register one of the callbacks described in this section, a module needs to use the module API's register_spam_checker_callbacks method. The callback functions are passed to register_spam_checker_callbacks as keyword arguments, with the callback name as the argument name and the function as its value. This is demonstrated in the example below.

The available spam checker callbacks are:

async def check_event_for_spam(event: "synapse.events.EventBase") -> Union[bool, str]

Called when receiving an event from a client or via federation. The module can return either a bool to indicate whether the event must be rejected because of spam, or a str to indicate the event must be rejected because of spam and to give a rejection reason to forward to clients.

async def user_may_invite(inviter: str, invitee: str, room_id: str) -> bool

Called when processing an invitation. The module must return a bool indicating whether the inviter can invite the invitee to the given room. Both inviter and invitee are represented by their Matrix user ID (i.e. @alice:example.com).

async def user_may_create_room(user: str) -> bool

Called when processing a room creation request. The module must return a bool indicating whether the given user (represented by their Matrix user ID) is allowed to create a room.

async def user_may_create_room_alias(user: str, room_alias: "synapse.types.RoomAlias") -> bool

Called when trying to associate an alias with an existing room. The module must return a bool indicating whether the given user (represented by their Matrix user ID) is allowed to set the given alias.

async def user_may_publish_room(user: str, room_id: str) -> bool

Called when trying to publish a room to the homeserver's public rooms directory. The module must return a bool indicating whether the given user (represented by their Matrix user ID) is allowed to publish the given room.

async def check_username_for_spam(user_profile: Dict[str, str]) -> bool

Called when computing search results in the user directory. The module must return a bool indicating whether the given user profile can appear in search results. The profile is represented as a dictionary with the following keys:

  • user_id: The Matrix ID for this user.
  • display_name: The user's display name.
  • avatar_url: The mxc:// URL to the user's avatar.

The module is given a copy of the original dictionary, so modifying it from within the module cannot modify a user's profile when included in user directory search results.

async def check_registration_for_spam(
    email_threepid: Optional[dict],
    username: Optional[str],
    request_info: Collection[Tuple[str, str]],
    auth_provider_id: Optional[str] = None,
) -> "synapse.spam_checker_api.RegistrationBehaviour"

Called when registering a new user. The module must return a RegistrationBehaviour indicating whether the registration can go through or must be denied, or whether the user may be allowed to register but will be shadow banned.

The arguments passed to this callback are:

  • email_threepid: The email address used for registering, if any.
  • username: The username the user would like to register. Can be None, meaning that Synapse will generate one later.
  • request_info: A collection of tuples, which first item is a user agent, and which second item is an IP address. These user agents and IP addresses are the ones that were used during the registration process.
  • auth_provider_id: The identifier of the SSO authentication provider, if any.
async def check_media_file_for_spam(
    file_wrapper: "synapse.rest.media.v1.media_storage.ReadableFileWrapper",
    file_info: "synapse.rest.media.v1._base.FileInfo"
) -> bool

Called when storing a local or remote file. The module must return a boolean indicating whether the given file can be stored in the homeserver's media store.

Porting an existing module that uses the old interface

In order to port a module that uses Synapse's old module interface, its author needs to:

  • ensure the module's callbacks are all asynchronous.
  • register their callbacks using one or more of the register_[...]_callbacks methods from the ModuleApi class in the module's __init__ method (see this section for more info).

Additionally, if the module is packaged with an additional web resource, the module should register this resource in its __init__ method using the register_web_resource method from the ModuleApi class (see this section for more info).

The module's author should also update any example in the module's configuration to only use the new modules section in Synapse's configuration file (see this section for more info).

Example

The example below is a module that implements the spam checker callback user_may_create_room to deny room creation to user @evilguy:example.com, and registers a web resource to the path /_synapse/client/demo/hello that returns a JSON object.

import json

from twisted.web.resource import Resource
from twisted.web.server import Request

from synapse.module_api import ModuleApi


class DemoResource(Resource):
    def __init__(self, config):
        super(DemoResource, self).__init__()
        self.config = config

    def render_GET(self, request: Request):
        name = request.args.get(b"name")[0]
        request.setHeader(b"Content-Type", b"application/json")
        return json.dumps({"hello": name})


class DemoModule:
    def __init__(self, config: dict, api: ModuleApi):
        self.config = config
        self.api = api

        self.api.register_web_resource(
            path="/_synapse/client/demo/hello",
            resource=DemoResource(self.config),
        )

        self.api.register_spam_checker_callbacks(
            user_may_create_room=self.user_may_create_room,
        )

    @staticmethod
    def parse_config(config):
        return config

    async def user_may_create_room(self, user: str) -> bool:
        if user == "@evilguy:example.com":
            return False

        return True

Note: this page of the Synapse documentation is now deprecated. For up to date documentation on setting up or writing a spam checker module, please see this page.

Handling spam in Synapse

Synapse has support to customize spam checking behavior. It can plug into a variety of events and affect how they are presented to users on your homeserver.

The spam checking behavior is implemented as a Python class, which must be able to be imported by the running Synapse.

Python spam checker class

The Python class is instantiated with two objects:

  • Any configuration (see below).
  • An instance of synapse.module_api.ModuleApi.

It then implements methods which return a boolean to alter behavior in Synapse. All the methods must be defined.

There's a generic method for checking every event (check_event_for_spam), as well as some specific methods:

  • user_may_invite
  • user_may_create_room
  • user_may_create_room_alias
  • user_may_publish_room
  • check_username_for_spam
  • check_registration_for_spam
  • check_media_file_for_spam

The details of each of these methods (as well as their inputs and outputs) are documented in the synapse.events.spamcheck.SpamChecker class.

The ModuleApi class provides a way for the custom spam checker class to call back into the homeserver internals.

Additionally, a parse_config method is mandatory and receives the plugin config dictionary. After parsing, It must return an object which will be passed to __init__ later.

Example

from synapse.spam_checker_api import RegistrationBehaviour

class ExampleSpamChecker:
    def __init__(self, config, api):
        self.config = config
        self.api = api

    @staticmethod
    def parse_config(config):
        return config
        
    async def check_event_for_spam(self, foo):
        return False  # allow all events

    async def user_may_invite(self, inviter_userid, invitee_userid, room_id):
        return True  # allow all invites

    async def user_may_create_room(self, userid):
        return True  # allow all room creations

    async def user_may_create_room_alias(self, userid, room_alias):
        return True  # allow all room aliases

    async def user_may_publish_room(self, userid, room_id):
        return True  # allow publishing of all rooms

    async def check_username_for_spam(self, user_profile):
        return False  # allow all usernames

    async def check_registration_for_spam(
        self,
        email_threepid,
        username,
        request_info,
        auth_provider_id,
    ):
        return RegistrationBehaviour.ALLOW  # allow all registrations

    async def check_media_file_for_spam(self, file_wrapper, file_info):
        return False  # allow all media

Configuration

Modify the spam_checker section of your homeserver.yaml in the following manner:

Create a list entry with the keys module and config.

  • module should point to the fully qualified Python class that implements your custom logic, e.g. my_module.ExampleSpamChecker.

  • config is a dictionary that gets passed to the spam checker class.

Example

This section might look like:

spam_checker:
  - module: my_module.ExampleSpamChecker
    config:
      # Enable or disable a specific option in ExampleSpamChecker.
      my_custom_option: true

More spam checkers can be added in tandem by appending more items to the list. An action is blocked when at least one of the configured spam checkers flags it.

Examples

The Mjolnir project is a full fledged example using the Synapse spam checking API, including a bot for dynamic configuration.

Presence Router Module

Synapse supports configuring a module that can specify additional users (local or remote) to should receive certain presence updates from local users.

Note that routing presence via Application Service transactions is not currently supported.

The presence routing module is implemented as a Python class, which will be imported by the running Synapse.

Python Presence Router Class

The Python class is instantiated with two objects:

  • A configuration object of some type (see below).
  • An instance of synapse.module_api.ModuleApi.

It then implements methods related to presence routing.

Note that one method of ModuleApi that may be useful is:

async def ModuleApi.send_local_online_presence_to(users: Iterable[str]) -> None

which can be given a list of local or remote MXIDs to broadcast known, online user presence to (for those users that the receiving user is considered interested in). It does not include state for users who are currently offline, and it can only be called on workers that support sending federation. Additionally, this method must only be called from the process that has been configured to write to the the presence stream. By default, this is the main process, but another worker can be configured to do so.

Module structure

Below is a list of possible methods that can be implemented, and whether they are required.

parse_config

def parse_config(config_dict: dict) -> Any

Required. A static method that is passed a dictionary of config options, and should return a validated config object. This method is described further in Configuration.

get_users_for_states

async def get_users_for_states(
    self,
    state_updates: Iterable[UserPresenceState],
) -> Dict[str, Set[UserPresenceState]]:

Required. An asynchronous method that is passed an iterable of user presence state. This method can determine whether a given presence update should be sent to certain users. It does this by returning a dictionary with keys representing local or remote Matrix User IDs, and values being a python set of synapse.handlers.presence.UserPresenceState instances.

Synapse will then attempt to send the specified presence updates to each user when possible.

get_interested_users

async def get_interested_users(self, user_id: str) -> Union[Set[str], str]

Required. An asynchronous method that is passed a single Matrix User ID. This method is expected to return the users that the passed in user may be interested in the presence of. Returned users may be local or remote. The presence routed as a result of what this method returns is sent in addition to the updates already sent between users that share a room together. Presence updates are deduplicated.

This method should return a python set of Matrix User IDs, or the object synapse.events.presence_router.PresenceRouter.ALL_USERS to indicate that the passed user should receive presence information for all known users.

For clarity, if the user @alice:example.org is passed to this method, and the Set {"@bob:example.com", "@charlie:somewhere.org"} is returned, this signifies that Alice should receive presence updates sent by Bob and Charlie, regardless of whether these users share a room.

Example

Below is an example implementation of a presence router class.

from typing import Dict, Iterable, Set, Union
from synapse.events.presence_router import PresenceRouter
from synapse.handlers.presence import UserPresenceState
from synapse.module_api import ModuleApi

class PresenceRouterConfig:
    def __init__(self):
        # Config options with their defaults
        # A list of users to always send all user presence updates to
        self.always_send_to_users = []  # type: List[str]
        
        # A list of users to ignore presence updates for. Does not affect
        # shared-room presence relationships
        self.blacklisted_users = []  # type: List[str]

class ExamplePresenceRouter:
    """An example implementation of synapse.presence_router.PresenceRouter.
    Supports routing all presence to a configured set of users, or a subset
    of presence from certain users to members of certain rooms.

    Args:
        config: A configuration object.
        module_api: An instance of Synapse's ModuleApi.
    """
    def __init__(self, config: PresenceRouterConfig, module_api: ModuleApi):
        self._config = config
        self._module_api = module_api

    @staticmethod
    def parse_config(config_dict: dict) -> PresenceRouterConfig:
        """Parse a configuration dictionary from the homeserver config, do
        some validation and return a typed PresenceRouterConfig.

        Args:
            config_dict: The configuration dictionary.

        Returns:
            A validated config object.
        """
        # Initialise a typed config object
        config = PresenceRouterConfig()
        always_send_to_users = config_dict.get("always_send_to_users")
        blacklisted_users = config_dict.get("blacklisted_users")

        # Do some validation of config options... otherwise raise a
        # synapse.config.ConfigError.
        config.always_send_to_users = always_send_to_users
        config.blacklisted_users = blacklisted_users

        return config

    async def get_users_for_states(
        self,
        state_updates: Iterable[UserPresenceState],
    ) -> Dict[str, Set[UserPresenceState]]:
        """Given an iterable of user presence updates, determine where each one
        needs to go. Returned results will not affect presence updates that are
        sent between users who share a room.

        Args:
            state_updates: An iterable of user presence state updates.

        Returns:
          A dictionary of user_id -> set of UserPresenceState that the user should 
          receive.
        """
        destination_users = {}  # type: Dict[str, Set[UserPresenceState]

        # Ignore any updates for blacklisted users
        desired_updates = set()
        for update in state_updates:
            if update.state_key not in self._config.blacklisted_users:
                desired_updates.add(update)

        # Send all presence updates to specific users
        for user_id in self._config.always_send_to_users:
            destination_users[user_id] = desired_updates

        return destination_users

    async def get_interested_users(
        self,
        user_id: str,
    ) -> Union[Set[str], PresenceRouter.ALL_USERS]:
        """
        Retrieve a list of users that `user_id` is interested in receiving the
        presence of. This will be in addition to those they share a room with.
        Optionally, the object PresenceRouter.ALL_USERS can be returned to indicate
        that this user should receive all incoming local and remote presence updates.

        Note that this method will only be called for local users.

        Args:
          user_id: A user requesting presence updates.

        Returns:
          A set of user IDs to return additional presence updates for, or
          PresenceRouter.ALL_USERS to return presence updates for all other users.
        """
        if user_id in self._config.always_send_to_users:
            return PresenceRouter.ALL_USERS

        return set()

A note on get_users_for_states and get_interested_users

Both of these methods are effectively two different sides of the same coin. The logic regarding which users should receive updates for other users should be the same between them.

get_users_for_states is called when presence updates come in from either federation or local users, and is used to either direct local presence to remote users, or to wake up the sync streams of local users to collect remote presence.

In contrast, get_interested_users is used to determine the users that presence should be fetched for when a local user is syncing. This presence is then retrieved, before being fed through get_users_for_states once again, with only the syncing user's routing information pulled from the resulting dictionary.

Their routing logic should thus line up, else you may run into unintended behaviour.

Configuration

Once you've crafted your module and installed it into the same Python environment as Synapse, amend your homeserver config file with the following.

presence:
  routing_module:
    module: my_module.ExamplePresenceRouter
    config:
      # Any configuration options for your module. The below is an example.
      # of setting options for ExamplePresenceRouter.
      always_send_to_users: ["@presence_gobbler:example.org"]
      blacklisted_users:
        - "@alice:example.com"
        - "@bob:example.com"
      ...

The contents of config will be passed as a Python dictionary to the static parse_config method of your class. The object returned by this method will then be passed to the __init__ method of your module as config.

Scaling synapse via workers

For small instances it recommended to run Synapse in the default monolith mode. For larger instances where performance is a concern it can be helpful to split out functionality into multiple separate python processes. These processes are called 'workers', and are (eventually) intended to scale horizontally independently.

Synapse's worker support is under active development and subject to change as we attempt to rapidly scale ever larger Synapse instances. However we are documenting it here to help admins needing a highly scalable Synapse instance similar to the one running matrix.org.

All processes continue to share the same database instance, and as such, workers only work with PostgreSQL-based Synapse deployments. SQLite should only be used for demo purposes and any admin considering workers should already be running PostgreSQL.

See also Matrix.org blog post for a higher level overview.

Main process/worker communication

The processes communicate with each other via a Synapse-specific protocol called 'replication' (analogous to MySQL- or Postgres-style database replication) which feeds streams of newly written data between processes so they can be kept in sync with the database state.

When configured to do so, Synapse uses a Redis pub/sub channel to send the replication stream between all configured Synapse processes. Additionally, processes may make HTTP requests to each other, primarily for operations which need to wait for a reply ─ such as sending an event.

Redis support was added in v1.13.0 with it becoming the recommended method in v1.18.0. It replaced the old direct TCP connections (which is deprecated as of v1.18.0) to the main process. With Redis, rather than all the workers connecting to the main process, all the workers and the main process connect to Redis, which relays replication commands between processes. This can give a significant cpu saving on the main process and will be a prerequisite for upcoming performance improvements.

If Redis support is enabled Synapse will use it as a shared cache, as well as a pub/sub mechanism.

See the Architectural diagram section at the end for a visualisation of what this looks like.

Setting up workers

A Redis server is required to manage the communication between the processes. The Redis server should be installed following the normal procedure for your distribution (e.g. apt install redis-server on Debian). It is safe to use an existing Redis deployment if you have one.

Once installed, check that Redis is running and accessible from the host running Synapse, for example by executing echo PING | nc -q1 localhost 6379 and seeing a response of +PONG.

The appropriate dependencies must also be installed for Synapse. If using a virtualenv, these can be installed with:

pip install "matrix-synapse[redis]"

Note that these dependencies are included when synapse is installed with pip install matrix-synapse[all]. They are also included in the debian packages from matrix.org and in the docker images at https://hub.docker.com/r/matrixdotorg/synapse/.

To make effective use of the workers, you will need to configure an HTTP reverse-proxy such as nginx or haproxy, which will direct incoming requests to the correct worker, or to the main synapse instance. See reverse_proxy.md for information on setting up a reverse proxy.

When using workers, each worker process has its own configuration file which contains settings specific to that worker, such as the HTTP listener that it provides (if any), logging configuration, etc.

Normally, the worker processes are configured to read from a shared configuration file as well as the worker-specific configuration files. This makes it easier to keep common configuration settings synchronised across all the processes.

The main process is somewhat special in this respect: it does not normally need its own configuration file and can take all of its configuration from the shared configuration file.

Shared configuration

Normally, only a couple of changes are needed to make an existing configuration file suitable for use with workers. First, you need to enable an "HTTP replication listener" for the main process; and secondly, you need to enable redis-based replication. Optionally, a shared secret can be used to authenticate HTTP traffic between workers. For example:

# extend the existing `listeners` section. This defines the ports that the
# main process will listen on.
listeners:
  # The HTTP replication port
  - port: 9093
    bind_address: '127.0.0.1'
    type: http
    resources:
     - names: [replication]

# Add a random shared secret to authenticate traffic.
worker_replication_secret: ""

redis:
    enabled: true

See the sample config for the full documentation of each option.

Under no circumstances should the replication listener be exposed to the public internet; it has no authentication and is unencrypted.

Worker configuration

In the config file for each worker, you must specify the type of worker application (worker_app), and you should specify a unique name for the worker (worker_name). The currently available worker applications are listed below. You must also specify the HTTP replication endpoint that it should talk to on the main synapse process. worker_replication_host should specify the host of the main synapse and worker_replication_http_port should point to the HTTP replication port. If the worker will handle HTTP requests then the worker_listeners option should be set with a http listener, in the same way as the listeners option in the shared config.

For example:

worker_app: synapse.app.generic_worker
worker_name: worker1

# The replication listener on the main synapse process.
worker_replication_host: 127.0.0.1
worker_replication_http_port: 9093

worker_listeners:
 - type: http
   port: 8083
   resources:
     - names:
       - client
       - federation

worker_log_config: /home/matrix/synapse/config/worker1_log_config.yaml

...is a full configuration for a generic worker instance, which will expose a plain HTTP endpoint on port 8083 separately serving various endpoints, e.g. /sync, which are listed below.

Obviously you should configure your reverse-proxy to route the relevant endpoints to the worker (localhost:8083 in the above example).

Running Synapse with workers

Finally, you need to start your worker processes. This can be done with either synctl or your distribution's preferred service manager such as systemd. We recommend the use of systemd where available: for information on setting up systemd to start synapse workers, see systemd-with-workers. To use synctl, see synctl_workers.md.

Available worker applications

synapse.app.generic_worker

This worker can handle API requests matching the following regular expressions:

# Sync requests
^/_matrix/client/(v2_alpha|r0)/sync$
^/_matrix/client/(api/v1|v2_alpha|r0)/events$
^/_matrix/client/(api/v1|r0)/initialSync$
^/_matrix/client/(api/v1|r0)/rooms/[^/]+/initialSync$

# Federation requests
^/_matrix/federation/v1/event/
^/_matrix/federation/v1/state/
^/_matrix/federation/v1/state_ids/
^/_matrix/federation/v1/backfill/
^/_matrix/federation/v1/get_missing_events/
^/_matrix/federation/v1/publicRooms
^/_matrix/federation/v1/query/
^/_matrix/federation/v1/make_join/
^/_matrix/federation/v1/make_leave/
^/_matrix/federation/v1/send_join/
^/_matrix/federation/v2/send_join/
^/_matrix/federation/v1/send_leave/
^/_matrix/federation/v2/send_leave/
^/_matrix/federation/v1/invite/
^/_matrix/federation/v2/invite/
^/_matrix/federation/v1/query_auth/
^/_matrix/federation/v1/event_auth/
^/_matrix/federation/v1/exchange_third_party_invite/
^/_matrix/federation/v1/user/devices/
^/_matrix/federation/v1/get_groups_publicised$
^/_matrix/key/v2/query

# Inbound federation transaction request
^/_matrix/federation/v1/send/

# Client API requests
^/_matrix/client/(api/v1|r0|unstable)/publicRooms$
^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/joined_members$
^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/context/.*$
^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/members$
^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/state$
^/_matrix/client/(api/v1|r0|unstable)/account/3pid$
^/_matrix/client/(api/v1|r0|unstable)/devices$
^/_matrix/client/(api/v1|r0|unstable)/keys/query$
^/_matrix/client/(api/v1|r0|unstable)/keys/changes$
^/_matrix/client/versions$
^/_matrix/client/(api/v1|r0|unstable)/voip/turnServer$
^/_matrix/client/(api/v1|r0|unstable)/joined_groups$
^/_matrix/client/(api/v1|r0|unstable)/publicised_groups$
^/_matrix/client/(api/v1|r0|unstable)/publicised_groups/
^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/event/
^/_matrix/client/(api/v1|r0|unstable)/joined_rooms$
^/_matrix/client/(api/v1|r0|unstable)/search$

# Registration/login requests
^/_matrix/client/(api/v1|r0|unstable)/login$
^/_matrix/client/(r0|unstable)/register$

# Event sending requests
^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/redact
^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/send
^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/state/
^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/(join|invite|leave|ban|unban|kick)$
^/_matrix/client/(api/v1|r0|unstable)/join/
^/_matrix/client/(api/v1|r0|unstable)/profile/

Additionally, the following REST endpoints can be handled for GET requests:

^/_matrix/federation/v1/groups/

Pagination requests can also be handled, but all requests for a given room must be routed to the same instance. Additionally, care must be taken to ensure that the purge history admin API is not used while pagination requests for the room are in flight:

^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/messages$

Additionally, the following endpoints should be included if Synapse is configured to use SSO (you only need to include the ones for whichever SSO provider you're using):

# for all SSO providers
^/_matrix/client/(api/v1|r0|unstable)/login/sso/redirect
^/_synapse/client/pick_idp$
^/_synapse/client/pick_username
^/_synapse/client/new_user_consent$
^/_synapse/client/sso_register$

# OpenID Connect requests.
^/_synapse/client/oidc/callback$

# SAML requests.
^/_synapse/client/saml2/authn_response$

# CAS requests.
^/_matrix/client/(api/v1|r0|unstable)/login/cas/ticket$

Ensure that all SSO logins go to a single process. For multiple workers not handling the SSO endpoints properly, see #7530 and #9427.

Note that a HTTP listener with client and federation resources must be configured in the worker_listeners option in the worker config.

Load balancing

It is possible to run multiple instances of this worker app, with incoming requests being load-balanced between them by the reverse-proxy. However, different endpoints have different characteristics and so admins may wish to run multiple groups of workers handling different endpoints so that load balancing can be done in different ways.

For /sync and /initialSync requests it will be more efficient if all requests from a particular user are routed to a single instance. Extracting a user ID from the access token or Authorization header is currently left as an exercise for the reader. Admins may additionally wish to separate out /sync requests that have a since query parameter from those that don't (and /initialSync), as requests that don't are known as "initial sync" that happens when a user logs in on a new device and can be very resource intensive, so isolating these requests will stop them from interfering with other users ongoing syncs.

Federation and client requests can be balanced via simple round robin.

The inbound federation transaction request ^/_matrix/federation/v1/send/ should be balanced by source IP so that transactions from the same remote server go to the same process.

Registration/login requests can be handled separately purely to help ensure that unexpected load doesn't affect new logins and sign ups.

Finally, event sending requests can be balanced by the room ID in the URI (or the full URI, or even just round robin), the room ID is the path component after /rooms/. If there is a large bridge connected that is sending or may send lots of events, then a dedicated set of workers can be provisioned to limit the effects of bursts of events from that bridge on events sent by normal users.

Stream writers

Additionally, there is experimental support for moving writing of specific streams (such as events) off of the main process to a particular worker. (This is only supported with Redis-based replication.)

Currently supported streams are events and typing.

To enable this, the worker must have a HTTP replication listener configured, have a worker_name and be listed in the instance_map config. For example to move event persistence off to a dedicated worker, the shared configuration would include:

instance_map:
    event_persister1:
        host: localhost
        port: 8034

stream_writers:
    events: event_persister1

The events stream also experimentally supports having multiple writers, where work is sharded between them by room ID. Note that you must restart all worker instances when adding or removing event persisters. An example stream_writers configuration with multiple writers:

stream_writers:
    events:
        - event_persister1
        - event_persister2

Background tasks

There is also experimental support for moving background tasks to a separate worker. Background tasks are run periodically or started via replication. Exactly which tasks are configured to run depends on your Synapse configuration (e.g. if stats is enabled).

To enable this, the worker must have a worker_name and can be configured to run background tasks. For example, to move background tasks to a dedicated worker, the shared configuration would include:

run_background_tasks_on: background_worker

You might also wish to investigate the update_user_directory and media_instance_running_background_jobs settings.

synapse.app.pusher

Handles sending push notifications to sygnal and email. Doesn't handle any REST endpoints itself, but you should set start_pushers: False in the shared configuration file to stop the main synapse sending push notifications.

To run multiple instances at once the pusher_instances option should list all pusher instances by their worker name, e.g.:

pusher_instances:
    - pusher_worker1
    - pusher_worker2

synapse.app.appservice

Handles sending output traffic to Application Services. Doesn't handle any REST endpoints itself, but you should set notify_appservices: False in the shared configuration file to stop the main synapse sending appservice notifications.

Note this worker cannot be load-balanced: only one instance should be active.

synapse.app.federation_sender

Handles sending federation traffic to other servers. Doesn't handle any REST endpoints itself, but you should set send_federation: False in the shared configuration file to stop the main synapse sending this traffic.

If running multiple federation senders then you must list each instance in the federation_sender_instances option by their worker_name. All instances must be stopped and started when adding or removing instances. For example:

federation_sender_instances:
    - federation_sender1
    - federation_sender2

synapse.app.media_repository

Handles the media repository. It can handle all endpoints starting with:

/_matrix/media/

... and the following regular expressions matching media-specific administration APIs:

^/_synapse/admin/v1/purge_media_cache$
^/_synapse/admin/v1/room/.*/media.*$
^/_synapse/admin/v1/user/.*/media.*$
^/_synapse/admin/v1/media/.*$
^/_synapse/admin/v1/quarantine_media/.*$

You should also set enable_media_repo: False in the shared configuration file to stop the main synapse running background jobs related to managing the media repository.

In the media_repository worker configuration file, configure the http listener to expose the media resource. For example:

    worker_listeners:
     - type: http
       port: 8085
       resources:
         - names:
           - media

Note that if running multiple media repositories they must be on the same server and you must configure a single instance to run the background tasks, e.g.:

    media_instance_running_background_jobs: "media-repository-1"

Note that if a reverse proxy is used , then /_matrix/media/ must be routed for both inbound client and federation requests (if they are handled separately).

synapse.app.user_dir

Handles searches in the user directory. It can handle REST endpoints matching the following regular expressions:

^/_matrix/client/(api/v1|r0|unstable)/user_directory/search$

When using this worker you must also set update_user_directory: False in the shared configuration file to stop the main synapse running background jobs related to updating the user directory.

synapse.app.frontend_proxy

Proxies some frequently-requested client endpoints to add caching and remove load from the main synapse. It can handle REST endpoints matching the following regular expressions:

^/_matrix/client/(api/v1|r0|unstable)/keys/upload

If use_presence is False in the homeserver config, it can also handle REST endpoints matching the following regular expressions:

^/_matrix/client/(api/v1|r0|unstable)/presence/[^/]+/status

This "stub" presence handler will pass through GET request but make the PUT effectively a no-op.

It will proxy any requests it cannot handle to the main synapse instance. It must therefore be configured with the location of the main instance, via the worker_main_http_uri setting in the frontend_proxy worker configuration file. For example:

worker_main_http_uri: http://127.0.0.1:8008

Historical apps

Note: Historically there used to be more apps, however they have been amalgamated into a single synapse.app.generic_worker app. The remaining apps are ones that do specific processing unrelated to requests, e.g. the pusher that handles sending out push notifications for new events. The intention is for all these to be folded into the generic_worker app and to use config to define which processes handle the various proccessing such as push notifications.

Migration from old config

There are two main independent changes that have been made: introducing Redis support and merging apps into synapse.app.generic_worker. Both these changes are backwards compatible and so no changes to the config are required, however server admins are encouraged to plan to migrate to Redis as the old style direct TCP replication config is deprecated.

To migrate to Redis add the redis config as above, and optionally remove the TCP replication listener from master and worker_replication_port from worker config.

To migrate apps to use synapse.app.generic_worker simply update the worker_app option in the worker configs, and where worker are started (e.g. in systemd service files, but not required for synctl).

Architectural diagram

The following shows an example setup using Redis and a reverse proxy:

                     Clients & Federation
                              |
                              v
                        +-----------+
                        |           |
                        |  Reverse  |
                        |  Proxy    |
                        |           |
                        +-----------+
                            | | |
                            | | | HTTP requests
        +-------------------+ | +-----------+
        |                 +---+             |
        |                 |                 |
        v                 v                 v
+--------------+  +--------------+  +--------------+  +--------------+
|   Main       |  |   Generic    |  |   Generic    |  |  Event       |
|   Process    |  |   Worker 1   |  |   Worker 2   |  |  Persister   |
+--------------+  +--------------+  +--------------+  +--------------+
      ^    ^          |   ^   |         |   ^   |          ^    ^
      |    |          |   |   |         |   |   |          |    |
      |    |          |   |   |  HTTP   |   |   |          |    |
      |    +----------+<--|---|---------+   |   |          |    |
      |                   |   +-------------|-->+----------+    |
      |                   |                 |                   |
      |                   |                 |                   |
      v                   v                 v                   v
====================================================================
                                                         Redis pub/sub channel

Using synctl with workers

If you want to use synctl to manage your synapse processes, you will need to create an an additional configuration file for the main synapse process. That configuration should look like this:

worker_app: synapse.app.homeserver

Additionally, each worker app must be configured with the name of a "pid file", to which it will write its process ID when it starts. For example, for a synchrotron, you might write:

worker_pid_file: /home/matrix/synapse/worker1.pid

Finally, to actually run your worker-based synapse, you must pass synctl the -a commandline option to tell it to operate on all the worker configurations found in the given directory, e.g.:

synctl -a $CONFIG/workers start

Currently one should always restart all workers when restarting or upgrading synapse, unless you explicitly know it's safe not to. For instance, restarting synapse without restarting all the synchrotrons may result in broken typing notifications.

To manipulate a specific worker, you pass the -w option to synctl:

synctl -w $CONFIG/workers/worker1.yaml restart

Setting up Synapse with Workers and Systemd

This is a setup for managing synapse with systemd, including support for managing workers. It provides a matrix-synapse service for the master, as well as a matrix-synapse-worker@ service template for any workers you require. Additionally, to group the required services, it sets up a matrix-synapse.target.

See the folder system for the systemd unit files.

The folder workers contains an example configuration for the federation_reader worker.

Synapse configuration files

See workers.md for information on how to set up the configuration files and reverse-proxy correctly. You can find an example worker config in the workers folder.

Systemd manages daemonization itself, so ensure that none of the configuration files set either daemonize or worker_daemonize.

The config files of all workers are expected to be located in /etc/matrix-synapse/workers. If you want to use a different location, edit the provided *.service files accordingly.

There is no need for a separate configuration file for the master process.

Set up

  1. Adjust synapse configuration files as above.
  2. Copy the *.service and *.target files in system to /etc/systemd/system.
  3. Run systemctl daemon-reload to tell systemd to load the new unit files.
  4. Run systemctl enable matrix-synapse.service. This will configure the synapse master process to be started as part of the matrix-synapse.target target.
  5. For each worker process to be enabled, run systemctl enable matrix-synapse-worker@<worker_name>.service. For each <worker_name>, there should be a corresponding configuration file. /etc/matrix-synapse/workers/<worker_name>.yaml.
  6. Start all the synapse processes with systemctl start matrix-synapse.target.
  7. Tell systemd to start synapse on boot with systemctl enable matrix-synapse.target.

Usage

Once the services are correctly set up, you can use the following commands to manage your synapse installation:

# Restart Synapse master and all workers
systemctl restart matrix-synapse.target

# Stop Synapse and all workers
systemctl stop matrix-synapse.target

# Restart the master alone
systemctl start matrix-synapse.service

# Restart a specific worker (eg. federation_reader); the master is
# unaffected by this.
systemctl restart matrix-synapse-worker@federation_reader.service

# Add a new worker (assuming all configs are set up already)
systemctl enable matrix-synapse-worker@federation_writer.service
systemctl restart matrix-synapse.target

Hardening

Optional: If further hardening is desired, the file override-hardened.conf may be copied from contrib/systemd/override-hardened.conf in this repository to the location /etc/systemd/system/matrix-synapse.service.d/override-hardened.conf (the directory may have to be created). It enables certain sandboxing features in systemd to further secure the synapse service. You may read the comments to understand what the override file is doing. The same file will need to be copied to /etc/systemd/system/matrix-synapse-worker@.service.d/override-hardened-worker.conf (this directory may also have to be created) in order to apply the same hardening options to any worker processes.

Once these files have been copied to their appropriate locations, simply reload systemd's manager config files and restart all Synapse services to apply the hardening options. They will automatically be applied at every restart as long as the override files are present at the specified locations.

systemctl daemon-reload

# Restart services
systemctl restart matrix-synapse.target

In order to see their effect, you may run systemd-analyze security matrix-synapse.service before and after applying the hardening options to see the changes being applied at a glance.

Administration

This section contains information on managing your Synapse homeserver. This includes:

  • Managing users, rooms and media via the Admin API.
  • Setting up metrics and monitoring to give you insight into your homeserver's health.
  • Configuring structured logging.

The Admin API

Authenticate as a server admin

Many of the API calls in the admin api will require an access_token for a server admin. (Note that a server admin is distinct from a room admin.)

A user can be marked as a server admin by updating the database directly, e.g.:

UPDATE users SET admin = 1 WHERE name = '@foo:bar.com';

A new server admin user can also be created using the register_new_matrix_user command. This is a script that is located in the scripts/ directory, or possibly already on your $PATH depending on how Synapse was installed.

Finding your user's access_token is client-dependent, but will usually be shown in the client's settings.

Making an Admin API request

Once you have your access_token, you will need to authenticate each request to an Admin API endpoint by providing the token as either a query parameter or a request header. To add it as a request header in cURL:

curl --header "Authorization: Bearer <access_token>" <the_rest_of_your_API_request>

For more details on access tokens in Matrix, please refer to the complete matrix spec documentation.

Account validity API

This API allows a server administrator to manage the validity of an account. To use it, you must enable the account validity feature (under account_validity) in Synapse's configuration.

Renew account

This API extends the validity of an account by as much time as configured in the period parameter from the account_validity configuration.

The API is:

POST /_synapse/admin/v1/account_validity/validity

with the following body:

{
    "user_id": "<user ID for the account to renew>",
    "expiration_ts": 0,
    "enable_renewal_emails": true
}

expiration_ts is an optional parameter and overrides the expiration date, which otherwise defaults to now + validity period.

enable_renewal_emails is also an optional parameter and enables/disables sending renewal emails to the user. Defaults to true.

The API returns with the new expiration date for this account, as a timestamp in milliseconds since epoch:

{
    "expiration_ts": 0
}

Delete a local group

This API lets a server admin delete a local group. Doing so will kick all users out of the group so that their clients will correctly handle the group being deleted.

The API is:

POST /_synapse/admin/v1/delete_group/<group_id>

To use it, you will need to authenticate by providing an access_token for a server admin: see Admin API.

Show reported events

This API returns information about reported events.

The api is:

GET /_synapse/admin/v1/event_reports?from=0&limit=10

To use it, you will need to authenticate by providing an access_token for a server admin: see Admin API.

It returns a JSON body like the following:

{
    "event_reports": [
        {
            "event_id": "$bNUFCwGzWca1meCGkjp-zwslF-GfVcXukvRLI1_FaVY",
            "id": 2,
            "reason": "foo",
            "score": -100,
            "received_ts": 1570897107409,
            "canonical_alias": "#alias1:matrix.org",
            "room_id": "!ERAgBpSOcCCuTJqQPk:matrix.org",
            "name": "Matrix HQ",
            "sender": "@foobar:matrix.org",
            "user_id": "@foo:matrix.org"
        },
        {
            "event_id": "$3IcdZsDaN_En-S1DF4EMCy3v4gNRKeOJs8W5qTOKj4I",
            "id": 3,
            "reason": "bar",
            "score": -100,
            "received_ts": 1598889612059,
            "canonical_alias": "#alias2:matrix.org",
            "room_id": "!eGvUQuTCkHGVwNMOjv:matrix.org",
            "name": "Your room name here",
            "sender": "@foobar:matrix.org",
            "user_id": "@bar:matrix.org"
        }
    ],
    "next_token": 2,
    "total": 4
}

To paginate, check for next_token and if present, call the endpoint again with from set to the value of next_token. This will return a new page.

If the endpoint does not return a next_token then there are no more reports to paginate through.

URL parameters:

  • limit: integer - Is optional but is used for pagination, denoting the maximum number of items to return in this call. Defaults to 100.
  • from: integer - Is optional but used for pagination, denoting the offset in the returned results. This should be treated as an opaque value and not explicitly set to anything other than the return value of next_token from a previous call. Defaults to 0.
  • dir: string - Direction of event report order. Whether to fetch the most recent first (b) or the oldest first (f). Defaults to b.
  • user_id: string - Is optional and filters to only return users with user IDs that contain this value. This is the user who reported the event and wrote the reason.
  • room_id: string - Is optional and filters to only return rooms with room IDs that contain this value.

Response

The following fields are returned in the JSON response body:

  • id: integer - ID of event report.
  • received_ts: integer - The timestamp (in milliseconds since the unix epoch) when this report was sent.
  • room_id: string - The ID of the room in which the event being reported is located.
  • name: string - The name of the room.
  • event_id: string - The ID of the reported event.
  • user_id: string - This is the user who reported the event and wrote the reason.
  • reason: string - Comment made by the user_id in this report. May be blank or null.
  • score: integer - Content is reported based upon a negative score, where -100 is "most offensive" and 0 is "inoffensive". May be null.
  • sender: string - This is the ID of the user who sent the original message/event that was reported.
  • canonical_alias: string - The canonical alias of the room. null if the room does not have a canonical alias set.
  • next_token: integer - Indication for pagination. See above.
  • total: integer - Total number of event reports related to the query (user_id and room_id).

Show details of a specific event report

This API returns information about a specific event report.

The api is:

GET /_synapse/admin/v1/event_reports/<report_id>

To use it, you will need to authenticate by providing an access_token for a server admin: see Admin API.

It returns a JSON body like the following:

{
    "event_id": "$bNUFCwGzWca1meCGkjp-zwslF-GfVcXukvRLI1_FaVY",
    "event_json": {
        "auth_events": [
            "$YK4arsKKcc0LRoe700pS8DSjOvUT4NDv0HfInlMFw2M",
            "$oggsNXxzPFRE3y53SUNd7nsj69-QzKv03a1RucHu-ws"
        ],
        "content": {
            "body": "matrix.org: This Week in Matrix",
            "format": "org.matrix.custom.html",
            "formatted_body": "<strong>matrix.org</strong>:<br><a href=\"https://matrix.org/blog/\"><strong>This Week in Matrix</strong></a>",
            "msgtype": "m.notice"
        },
        "depth": 546,
        "hashes": {
            "sha256": "xK1//xnmvHJIOvbgXlkI8eEqdvoMmihVDJ9J4SNlsAw"
        },
        "origin": "matrix.org",
        "origin_server_ts": 1592291711430,
        "prev_events": [
            "$YK4arsKKcc0LRoe700pS8DSjOvUT4NDv0HfInlMFw2M"
        ],
        "prev_state": [],
        "room_id": "!ERAgBpSOcCCuTJqQPk:matrix.org",
        "sender": "@foobar:matrix.org",
        "signatures": {
            "matrix.org": {
                "ed25519:a_JaEG": "cs+OUKW/iHx5pEidbWxh0UiNNHwe46Ai9LwNz+Ah16aWDNszVIe2gaAcVZfvNsBhakQTew51tlKmL2kspXk/Dg"
            }
        },
        "type": "m.room.message",
        "unsigned": {
            "age_ts": 1592291711430,
        }
    },
    "id": <report_id>,
    "reason": "foo",
    "score": -100,
    "received_ts": 1570897107409,
    "canonical_alias": "#alias1:matrix.org",
    "room_id": "!ERAgBpSOcCCuTJqQPk:matrix.org",
    "name": "Matrix HQ",
    "sender": "@foobar:matrix.org",
    "user_id": "@foo:matrix.org"
}

URL parameters:

  • report_id: string - The ID of the event report.

Response

The following fields are returned in the JSON response body:

  • id: integer - ID of event report.
  • received_ts: integer - The timestamp (in milliseconds since the unix epoch) when this report was sent.
  • room_id: string - The ID of the room in which the event being reported is located.
  • name: string - The name of the room.
  • event_id: string - The ID of the reported event.
  • user_id: string - This is the user who reported the event and wrote the reason.
  • reason: string - Comment made by the user_id in this report. May be blank.
  • score: integer - Content is reported based upon a negative score, where -100 is "most offensive" and 0 is "inoffensive".
  • sender: string - This is the ID of the user who sent the original message/event that was reported.
  • canonical_alias: string - The canonical alias of the room. null if the room does not have a canonical alias set.
  • event_json: object - Details of the original event that was reported.

Contents

Querying media

These APIs allow extracting media information from the homeserver.

List all media in a room

This API gets a list of known media in a room. However, it only shows media from unencrypted events or rooms.

The API is:

GET /_synapse/admin/v1/room/<room_id>/media

To use it, you will need to authenticate by providing an access_token for a server admin: see Admin API.

The API returns a JSON body like the following:

{
  "local": [
    "mxc://localhost/xwvutsrqponmlkjihgfedcba",
    "mxc://localhost/abcdefghijklmnopqrstuvwx"
  ],
  "remote": [
    "mxc://matrix.org/xwvutsrqponmlkjihgfedcba",
    "mxc://matrix.org/abcdefghijklmnopqrstuvwx"
  ]
}

List all media uploaded by a user

Listing all media that has been uploaded by a local user can be achieved through the use of the List media of a user Admin API.

Quarantine media

Quarantining media means that it is marked as inaccessible by users. It applies to any local media, and any locally-cached copies of remote media.

The media file itself (and any thumbnails) is not deleted from the server.

Quarantining media by ID

This API quarantines a single piece of local or remote media.

Request:

POST /_synapse/admin/v1/media/quarantine/<server_name>/<media_id>

{}

Where server_name is in the form of example.org, and media_id is in the form of abcdefg12345....

Response:

{}

Remove media from quarantine by ID

This API removes a single piece of local or remote media from quarantine.

Request:

POST /_synapse/admin/v1/media/unquarantine/<server_name>/<media_id>

{}

Where server_name is in the form of example.org, and media_id is in the form of abcdefg12345....

Response:

{}

Quarantining media in a room

This API quarantines all local and remote media in a room.

Request:

POST /_synapse/admin/v1/room/<room_id>/media/quarantine

{}

Where room_id is in the form of !roomid12345:example.org.

Response:

{
  "num_quarantined": 10
}

The following fields are returned in the JSON response body:

  • num_quarantined: integer - The number of media items successfully quarantined

Note that there is a legacy endpoint, POST /_synapse/admin/v1/quarantine_media/<room_id>, that operates the same. However, it is deprecated and may be removed in a future release.

Quarantining all media of a user

This API quarantines all local media that a local user has uploaded. That is to say, if you would like to quarantine media uploaded by a user on a remote homeserver, you should instead use one of the other APIs.

Request:

POST /_synapse/admin/v1/user/<user_id>/media/quarantine

{}

URL Parameters

  • user_id: string - User ID in the form of @bob:example.org

Response:

{
  "num_quarantined": 10
}

The following fields are returned in the JSON response body:

  • num_quarantined: integer - The number of media items successfully quarantined

Protecting media from being quarantined

This API protects a single piece of local media from being quarantined using the above APIs. This is useful for sticker packs and other shared media which you do not want to get quarantined, especially when quarantining media in a room.

Request:

POST /_synapse/admin/v1/media/protect/<media_id>

{}

Where media_id is in the form of abcdefg12345....

Response:

{}

Unprotecting media from being quarantined

This API reverts the protection of a media.

Request:

POST /_synapse/admin/v1/media/unprotect/<media_id>

{}

Where media_id is in the form of abcdefg12345....

Response:

{}

Delete local media

This API deletes the local media from the disk of your own server. This includes any local thumbnails and copies of media downloaded from remote homeservers. This API will not affect media that has been uploaded to external media repositories (e.g https://github.com/turt2live/matrix-media-repo/). See also Purge Remote Media API.

Delete a specific local media

Delete a specific media_id.

Request:

DELETE /_synapse/admin/v1/media/<server_name>/<media_id>

{}

URL Parameters

  • server_name: string - The name of your local server (e.g matrix.org)
  • media_id: string - The ID of the media (e.g abcdefghijklmnopqrstuvwx)

Response:

{
  "deleted_media": [
    "abcdefghijklmnopqrstuvwx"
  ],
  "total": 1
}

The following fields are returned in the JSON response body:

  • deleted_media: an array of strings - List of deleted media_id
  • total: integer - Total number of deleted media_id

Delete local media by date or size

Request:

POST /_synapse/admin/v1/media/<server_name>/delete?before_ts=<before_ts>

{}

URL Parameters

  • server_name: string - The name of your local server (e.g matrix.org).
  • before_ts: string representing a positive integer - Unix timestamp in ms. Files that were last used before this timestamp will be deleted. It is the timestamp of last access and not the timestamp creation.
  • size_gt: Optional - string representing a positive integer - Size of the media in bytes. Files that are larger will be deleted. Defaults to 0.
  • keep_profiles: Optional - string representing a boolean - Switch to also delete files that are still used in image data (e.g user profile, room avatar). If false these files will be deleted. Defaults to true.

Response:

{
  "deleted_media": [
    "abcdefghijklmnopqrstuvwx",
    "abcdefghijklmnopqrstuvwz"
  ],
  "total": 2
}

The following fields are returned in the JSON response body:

  • deleted_media: an array of strings - List of deleted media_id
  • total: integer - Total number of deleted media_id

Purge Remote Media API

The purge remote media API allows server admins to purge old cached remote media.

The API is:

POST /_synapse/admin/v1/purge_media_cache?before_ts=<unix_timestamp_in_ms>

{}

URL Parameters

  • unix_timestamp_in_ms: string representing a positive integer - Unix timestamp in ms. All cached media that was last accessed before this timestamp will be removed.

Response:

{
  "deleted": 10
}

The following fields are returned in the JSON response body:

  • deleted: integer - The number of media items successfully deleted

To use it, you will need to authenticate by providing an access_token for a server admin: see Admin API.

If the user re-requests purged remote media, synapse will re-request the media from the originating server.

Purge History API

The purge history API allows server admins to purge historic events from their database, reclaiming disk space.

Depending on the amount of history being purged a call to the API may take several minutes or longer. During this period users will not be able to paginate further back in the room from the point being purged from.

Note that Synapse requires at least one message in each room, so it will never delete the last message in a room.

The API is:

POST /_synapse/admin/v1/purge_history/<room_id>[/<event_id>]

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

By default, events sent by local users are not deleted, as they may represent the only copies of this content in existence. (Events sent by remote users are deleted.)

Room state data (such as joins, leaves, topic) is always preserved.

To delete local message events as well, set delete_local_events in the body:

{
   "delete_local_events": true
}

The caller must specify the point in the room to purge up to. This can be specified by including an event_id in the URI, or by setting a purge_up_to_event_id or purge_up_to_ts in the request body. If an event id is given, that event (and others at the same graph depth) will be retained. If purge_up_to_ts is given, it should be a timestamp since the unix epoch, in milliseconds.

The API starts the purge running, and returns immediately with a JSON body with a purge id:

{
    "purge_id": "<opaque id>"
}

Purge status query

It is possible to poll for updates on recent purges with a second API;

GET /_synapse/admin/v1/purge_history_status/<purge_id>

Again, you will need to authenticate by providing an access_token for a server admin.

This API returns a JSON body like the following:

{
    "status": "active"
}

The status will be one of active, complete, or failed.

Reclaim disk space (Postgres)

To reclaim the disk space and return it to the operating system, you need to run VACUUM FULL; on the database.

https://www.postgresql.org/docs/current/sql-vacuum.html

Deprecated: Purge room API

The old Purge room API is deprecated and will be removed in a future release. See the new Delete Room API for more details.

This API will remove all trace of a room from your database.

All local users must have left the room before it can be removed.

The API is:

POST /_synapse/admin/v1/purge_room

{
    "room_id": "!room:id"
}

You must authenticate using the access token of an admin user.

Shared-Secret Registration

This API allows for the creation of users in an administrative and non-interactive way. This is generally used for bootstrapping a Synapse instance with administrator accounts.

To authenticate yourself to the server, you will need both the shared secret (registration_shared_secret in the homeserver configuration), and a one-time nonce. If the registration shared secret is not configured, this API is not enabled.

To fetch the nonce, you need to request one from the API:

> GET /_synapse/admin/v1/register

< {"nonce": "thisisanonce"}

Once you have the nonce, you can make a POST to the same URL with a JSON body containing the nonce, username, password, whether they are an admin (optional, False by default), and a HMAC digest of the content. Also you can set the displayname (optional, username by default).

As an example:

> POST /_synapse/admin/v1/register
> {
   "nonce": "thisisanonce",
   "username": "pepper_roni",
   "displayname": "Pepper Roni",
   "password": "pizza",
   "admin": true,
   "mac": "mac_digest_here"
  }

< {
   "access_token": "token_here",
   "user_id": "@pepper_roni:localhost",
   "home_server": "test",
   "device_id": "device_id_here"
  }

The MAC is the hex digest output of the HMAC-SHA1 algorithm, with the key being the shared secret and the content being the nonce, user, password, either the string "admin" or "notadmin", and optionally the user_type each separated by NULs. For an example of generation in Python:

import hmac, hashlib

def generate_mac(nonce, user, password, admin=False, user_type=None):

    mac = hmac.new(
      key=shared_secret,
      digestmod=hashlib.sha1,
    )

    mac.update(nonce.encode('utf8'))
    mac.update(b"\x00")
    mac.update(user.encode('utf8'))
    mac.update(b"\x00")
    mac.update(password.encode('utf8'))
    mac.update(b"\x00")
    mac.update(b"admin" if admin else b"notadmin")
    if user_type:
        mac.update(b"\x00")
        mac.update(user_type.encode('utf8'))

    return mac.hexdigest()

Edit Room Membership API

This API allows an administrator to join an user account with a given user_id to a room with a given room_id_or_alias. You can only modify the membership of local users. The server administrator must be in the room and have permission to invite users.

Parameters

The following parameters are available:

  • user_id - Fully qualified user: for example, @user:server.com.
  • room_id_or_alias - The room identifier or alias to join: for example, !636q39766251:server.com.

Usage

POST /_synapse/admin/v1/join/<room_id_or_alias>

{
  "user_id": "@user:server.com"
}

To use it, you will need to authenticate by providing an access_token for a server admin: see Admin API.

Response:

{
  "room_id": "!636q39766251:server.com"
}

Contents

List Room API

The List Room admin API allows server admins to get a list of rooms on their server. There are various parameters available that allow for filtering and sorting the returned list. This API supports pagination.

Parameters

The following query parameters are available:

  • from - Offset in the returned list. Defaults to 0.
  • limit - Maximum amount of rooms to return. Defaults to 100.
  • order_by - The method in which to sort the returned list of rooms. Valid values are:
    • alphabetical - Same as name. This is deprecated.
    • size - Same as joined_members. This is deprecated.
    • name - Rooms are ordered alphabetically by room name. This is the default.
    • canonical_alias - Rooms are ordered alphabetically by main alias address of the room.
    • joined_members - Rooms are ordered by the number of members. Largest to smallest.
    • joined_local_members - Rooms are ordered by the number of local members. Largest to smallest.
    • version - Rooms are ordered by room version. Largest to smallest.
    • creator - Rooms are ordered alphabetically by creator of the room.
    • encryption - Rooms are ordered alphabetically by the end-to-end encryption algorithm.
    • federatable - Rooms are ordered by whether the room is federatable.
    • public - Rooms are ordered by visibility in room list.
    • join_rules - Rooms are ordered alphabetically by join rules of the room.
    • guest_access - Rooms are ordered alphabetically by guest access option of the room.
    • history_visibility - Rooms are ordered alphabetically by visibility of history of the room.
    • state_events - Rooms are ordered by number of state events. Largest to smallest.
  • dir - Direction of room order. Either f for forwards or b for backwards. Setting this value to b will reverse the above sort order. Defaults to f.
  • search_term - Filter rooms by their room name. Search term can be contained in any part of the room name. Defaults to no filtering.

The following fields are possible in the JSON response body:

  • rooms - An array of objects, each containing information about a room.
    • Room objects contain the following fields:
      • room_id - The ID of the room.
      • name - The name of the room.
      • canonical_alias - The canonical (main) alias address of the room.
      • joined_members - How many users are currently in the room.
      • joined_local_members - How many local users are currently in the room.
      • version - The version of the room as a string.
      • creator - The user_id of the room creator.
      • encryption - Algorithm of end-to-end encryption of messages. Is null if encryption is not active.
      • federatable - Whether users on other servers can join this room.
      • public - Whether the room is visible in room directory.
      • join_rules - The type of rules used for users wishing to join this room. One of: ["public", "knock", "invite", "private"].
      • guest_access - Whether guests can join the room. One of: ["can_join", "forbidden"].
      • history_visibility - Who can see the room history. One of: ["invited", "joined", "shared", "world_readable"].
      • state_events - Total number of state_events of a room. Complexity of the room.
  • offset - The current pagination offset in rooms. This parameter should be used instead of next_token for room offset as next_token is not intended to be parsed.
  • total_rooms - The total number of rooms this query can return. Using this and offset, you have enough information to know the current progression through the list.
  • next_batch - If this field is present, we know that there are potentially more rooms on the server that did not all fit into this response. We can use next_batch to get the "next page" of results. To do so, simply repeat your request, setting the from parameter to the value of next_batch.
  • prev_batch - If this field is present, it is possible to paginate backwards. Use prev_batch for the from value in the next request to get the "previous page" of results.

Usage

A standard request with no filtering:

GET /_synapse/admin/v1/rooms

{}

Response:

{
  "rooms": [
    {
      "room_id": "!OGEhHVWSdvArJzumhm:matrix.org",
      "name": "Matrix HQ",
      "canonical_alias": "#matrix:matrix.org",
      "joined_members": 8326,
      "joined_local_members": 2,
      "version": "1",
      "creator": "@foo:matrix.org",
      "encryption": null,
      "federatable": true,
      "public": true,
      "join_rules": "invite",
      "guest_access": null,
      "history_visibility": "shared",
      "state_events": 93534
    },
    ... (8 hidden items) ...
    {
      "room_id": "!xYvNcQPhnkrdUmYczI:matrix.org",
      "name": "This Week In Matrix (TWIM)",
      "canonical_alias": "#twim:matrix.org",
      "joined_members": 314,
      "joined_local_members": 20,
      "version": "4",
      "creator": "@foo:matrix.org",
      "encryption": "m.megolm.v1.aes-sha2",
      "federatable": true,
      "public": false,
      "join_rules": "invite",
      "guest_access": null,
      "history_visibility": "shared",
      "state_events": 8345
    }
  ],
  "offset": 0,
  "total_rooms": 10
}

Filtering by room name:

GET /_synapse/admin/v1/rooms?search_term=TWIM

{}

Response:

{
  "rooms": [
    {
      "room_id": "!xYvNcQPhnkrdUmYczI:matrix.org",
      "name": "This Week In Matrix (TWIM)",
      "canonical_alias": "#twim:matrix.org",
      "joined_members": 314,
      "joined_local_members": 20,
      "version": "4",
      "creator": "@foo:matrix.org",
      "encryption": "m.megolm.v1.aes-sha2",
      "federatable": true,
      "public": false,
      "join_rules": "invite",
      "guest_access": null,
      "history_visibility": "shared",
      "state_events": 8
    }
  ],
  "offset": 0,
  "total_rooms": 1
}

Paginating through a list of rooms:

GET /_synapse/admin/v1/rooms?order_by=size

{}

Response:

{
  "rooms": [
    {
      "room_id": "!OGEhHVWSdvArJzumhm:matrix.org",
      "name": "Matrix HQ",
      "canonical_alias": "#matrix:matrix.org",
      "joined_members": 8326,
      "joined_local_members": 2,
      "version": "1",
      "creator": "@foo:matrix.org",
      "encryption": null,
      "federatable": true,
      "public": true,
      "join_rules": "invite",
      "guest_access": null,
      "history_visibility": "shared",
      "state_events": 93534
    },
    ... (98 hidden items) ...
    {
      "room_id": "!xYvNcQPhnkrdUmYczI:matrix.org",
      "name": "This Week In Matrix (TWIM)",
      "canonical_alias": "#twim:matrix.org",
      "joined_members": 314,
      "joined_local_members": 20,
      "version": "4",
      "creator": "@foo:matrix.org",
      "encryption": "m.megolm.v1.aes-sha2",
      "federatable": true,
      "public": false,
      "join_rules": "invite",
      "guest_access": null,
      "history_visibility": "shared",
      "state_events": 8345
    }
  ],
  "offset": 0,
  "total_rooms": 150
  "next_token": 100
}

The presence of the next_token parameter tells us that there are more rooms than returned in this request, and we need to make another request to get them. To get the next batch of room results, we repeat our request, setting the from parameter to the value of next_token.

GET /_synapse/admin/v1/rooms?order_by=size&from=100

{}

Response:

{
  "rooms": [
    {
      "room_id": "!mscvqgqpHYjBGDxNym:matrix.org",
      "name": "Music Theory",
      "canonical_alias": "#musictheory:matrix.org",
      "joined_members": 127,
      "joined_local_members": 2,
      "version": "1",
      "creator": "@foo:matrix.org",
      "encryption": null,
      "federatable": true,
      "public": true,
      "join_rules": "invite",
      "guest_access": null,
      "history_visibility": "shared",
      "state_events": 93534
    },
    ... (48 hidden items) ...
    {
      "room_id": "!twcBhHVdZlQWuuxBhN:termina.org.uk",
      "name": "weechat-matrix",
      "canonical_alias": "#weechat-matrix:termina.org.uk",
      "joined_members": 137,
      "joined_local_members": 20,
      "version": "4",
      "creator": "@foo:termina.org.uk",
      "encryption": null,
      "federatable": true,
      "public": true,
      "join_rules": "invite",
      "guest_access": null,
      "history_visibility": "shared",
      "state_events": 8345
    }
  ],
  "offset": 100,
  "prev_batch": 0,
  "total_rooms": 150
}

Once the next_token parameter is no longer present, we know we've reached the end of the list.

Room Details API

The Room Details admin API allows server admins to get all details of a room.

The following fields are possible in the JSON response body:

  • room_id - The ID of the room.
  • name - The name of the room.
  • topic - The topic of the room.
  • avatar - The mxc URI to the avatar of the room.
  • canonical_alias - The canonical (main) alias address of the room.
  • joined_members - How many users are currently in the room.
  • joined_local_members - How many local users are currently in the room.
  • joined_local_devices - How many local devices are currently in the room.
  • version - The version of the room as a string.
  • creator - The user_id of the room creator.
  • encryption - Algorithm of end-to-end encryption of messages. Is null if encryption is not active.
  • federatable - Whether users on other servers can join this room.
  • public - Whether the room is visible in room directory.
  • join_rules - The type of rules used for users wishing to join this room. One of: ["public", "knock", "invite", "private"].
  • guest_access - Whether guests can join the room. One of: ["can_join", "forbidden"].
  • history_visibility - Who can see the room history. One of: ["invited", "joined", "shared", "world_readable"].
  • state_events - Total number of state_events of a room. Complexity of the room.

Usage

A standard request:

GET /_synapse/admin/v1/rooms/<room_id>

{}

Response:

{
  "room_id": "!mscvqgqpHYjBGDxNym:matrix.org",
  "name": "Music Theory",
  "avatar": "mxc://matrix.org/AQDaVFlbkQoErdOgqWRgiGSV",
  "topic": "Theory, Composition, Notation, Analysis",
  "canonical_alias": "#musictheory:matrix.org",
  "joined_members": 127,
  "joined_local_members": 2,
  "joined_local_devices": 2,
  "version": "1",
  "creator": "@foo:matrix.org",
  "encryption": null,
  "federatable": true,
  "public": true,
  "join_rules": "invite",
  "guest_access": null,
  "history_visibility": "shared",
  "state_events": 93534
}

Room Members API

The Room Members admin API allows server admins to get a list of all members of a room.

The response includes the following fields:

  • members - A list of all the members that are present in the room, represented by their ids.
  • total - Total number of members in the room.

Usage

A standard request:

GET /_synapse/admin/v1/rooms/<room_id>/members

{}

Response:

{
  "members": [
    "@foo:matrix.org",
    "@bar:matrix.org",
    "@foobar:matrix.org"
  ],
  "total": 3
}

Room State API

The Room State admin API allows server admins to get a list of all state events in a room.

The response includes the following fields:

  • state - The current state of the room at the time of request.

Usage

A standard request:

GET /_synapse/admin/v1/rooms/<room_id>/state

{}

Response:

{
  "state": [
    {"type": "m.room.create", "state_key": "", "etc": true},
    {"type": "m.room.power_levels", "state_key": "", "etc": true},
    {"type": "m.room.name", "state_key": "", "etc": true}
  ]
}

Delete Room API

The Delete Room admin API allows server admins to remove rooms from server and block these rooms.

Shuts down a room. Moves all local users and room aliases automatically to a new room if new_room_user_id is set. Otherwise local users only leave the room without any information.

The new room will be created with the user specified by the new_room_user_id parameter as room administrator and will contain a message explaining what happened. Users invited to the new room will have power level -10 by default, and thus be unable to speak.

If block is True it prevents new joins to the old room.

This API will remove all trace of the old room from your database after removing all local users. If purge is true (the default), all traces of the old room will be removed from your database after removing all local users. If you do not want this to happen, set purge to false. Depending on the amount of history being purged a call to the API may take several minutes or longer.

The local server will only have the power to move local user and room aliases to the new room. Users on other servers will be unaffected.

The API is:

DELETE /_synapse/admin/v1/rooms/<room_id>

with a body of:

{
    "new_room_user_id": "@someuser:example.com",
    "room_name": "Content Violation Notification",
    "message": "Bad Room has been shutdown due to content violations on this server. Please review our Terms of Service.",
    "block": true,
    "purge": true
}

To use it, you will need to authenticate by providing an access_token for a server admin: see Admin API.

A response body like the following is returned:

{
    "kicked_users": [
        "@foobar:example.com"
    ],
    "failed_to_kick_users": [],
    "local_aliases": [
        "#badroom:example.com",
        "#evilsaloon:example.com"
    ],
    "new_room_id": "!newroomid:example.com"
}

Parameters

The following parameters should be set in the URL:

  • room_id - The ID of the room.

The following JSON body parameters are available:

  • new_room_user_id - Optional. If set, a new room will be created with this user ID as the creator and admin, and all users in the old room will be moved into that room. If not set, no new room will be created and the users will just be removed from the old room. The user ID must be on the local server, but does not necessarily have to belong to a registered user.
  • room_name - Optional. A string representing the name of the room that new users will be invited to. Defaults to Content Violation Notification
  • message - Optional. A string containing the first message that will be sent as new_room_user_id in the new room. Ideally this will clearly convey why the original room was shut down. Defaults to Sharing illegal content on this server is not permitted and rooms in violation will be blocked.
  • block - Optional. If set to true, this room will be added to a blocking list, preventing future attempts to join the room. Defaults to false.
  • purge - Optional. If set to true, it will remove all traces of the room from your database. Defaults to true.
  • force_purge - Optional, and ignored unless purge is true. If set to true, it will force a purge to go ahead even if there are local users still in the room. Do not use this unless a regular purge operation fails, as it could leave those users' clients in a confused state.

The JSON body must not be empty. The body must be at least {}.

Response

The following fields are returned in the JSON response body:

  • kicked_users - An array of users (user_id) that were kicked.
  • failed_to_kick_users - An array of users (user_id) that that were not kicked.
  • local_aliases - An array of strings representing the local aliases that were migrated from the old room to the new.
  • new_room_id - A string representing the room ID of the new room.

Undoing room shutdowns

Note: This guide may be outdated by the time you read it. By nature of room shutdowns being performed at the database level, the structure can and does change without notice.

First, it's important to understand that a room shutdown is very destructive. Undoing a shutdown is not as simple as pretending it never happened - work has to be done to move forward instead of resetting the past. In fact, in some cases it might not be possible to recover at all:

  • If the room was invite-only, your users will need to be re-invited.
  • If the room no longer has any members at all, it'll be impossible to rejoin.
  • The first user to rejoin will have to do so via an alias on a different server.

With all that being said, if you still want to try and recover the room:

  1. For safety reasons, shut down Synapse.
  2. In the database, run DELETE FROM blocked_rooms WHERE room_id = '!example:example.org';
    • For caution: it's recommended to run this in a transaction: BEGIN; DELETE ...;, verify you got 1 result, then COMMIT;.
    • The room ID is the same one supplied to the shutdown room API, not the Content Violation room.
  3. Restart Synapse.

You will have to manually handle, if you so choose, the following:

  • Aliases that would have been redirected to the Content Violation room.
  • Users that would have been booted from the room (and will have been force-joined to the Content Violation room).
  • Removal of the Content Violation room if desired.

Deprecated endpoint

The previous deprecated API will be removed in a future release, it was:

POST /_synapse/admin/v1/rooms/<room_id>/delete

It behaves the same way than the current endpoint except the path and the method.

Make Room Admin API

Grants another user the highest power available to a local user who is in the room. If the user is not in the room, and it is not publicly joinable, then invite the user.

By default the server admin (the caller) is granted power, but another user can optionally be specified, e.g.:

    POST /_synapse/admin/v1/rooms/<room_id_or_alias>/make_room_admin
    {
        "user_id": "@foo:example.com"
    }

Forward Extremities Admin API

Enables querying and deleting forward extremities from rooms. When a lot of forward extremities accumulate in a room, performance can become degraded. For details, see #1760.

Check for forward extremities

To check the status of forward extremities for a room:

    GET /_synapse/admin/v1/rooms/<room_id_or_alias>/forward_extremities

A response as follows will be returned:

{
  "count": 1,
  "results": [
    {
      "event_id": "$M5SP266vsnxctfwFgFLNceaCo3ujhRtg_NiiHabcdefgh",
      "state_group": 439,
      "depth": 123,
      "received_ts": 1611263016761
    }
  ]
}

Deleting forward extremities

WARNING: Please ensure you know what you're doing and have read the related issue #1760. Under no situations should this API be executed as an automated maintenance task!

If a room has lots of forward extremities, the extra can be deleted as follows:

    DELETE /_synapse/admin/v1/rooms/<room_id_or_alias>/forward_extremities

A response as follows will be returned, indicating the amount of forward extremities that were deleted.

{
  "deleted": 1
}

Event Context API

This API lets a client find the context of an event. This is designed primarily to investigate abuse reports.

GET /_synapse/admin/v1/rooms/<room_id>/context/<event_id>

This API mimmicks GET /_matrix/client/r0/rooms/{roomId}/context/{eventId}. Please refer to the link for all details on parameters and reseponse.

Example response:

{
  "end": "t29-57_2_0_2",
  "events_after": [
    {
      "content": {
        "body": "This is an example text message",
        "msgtype": "m.text",
        "format": "org.matrix.custom.html",
        "formatted_body": "<b>This is an example text message</b>"
      },
      "type": "m.room.message",
      "event_id": "$143273582443PhrSn:example.org",
      "room_id": "!636q39766251:example.com",
      "sender": "@example:example.org",
      "origin_server_ts": 1432735824653,
      "unsigned": {
        "age": 1234
      }
    }
  ],
  "event": {
    "content": {
      "body": "filename.jpg",
      "info": {
        "h": 398,
        "w": 394,
        "mimetype": "image/jpeg",
        "size": 31037
      },
      "url": "mxc://example.org/JWEIFJgwEIhweiWJE",
      "msgtype": "m.image"
    },
    "type": "m.room.message",
    "event_id": "$f3h4d129462ha:example.com",
    "room_id": "!636q39766251:example.com",
    "sender": "@example:example.org",
    "origin_server_ts": 1432735824653,
    "unsigned": {
      "age": 1234
    }
  },
  "events_before": [
    {
      "content": {
        "body": "something-important.doc",
        "filename": "something-important.doc",
        "info": {
          "mimetype": "application/msword",
          "size": 46144
        },
        "msgtype": "m.file",
        "url": "mxc://example.org/FHyPlCeYUSFFxlgbQYZmoEoe"
      },
      "type": "m.room.message",
      "event_id": "$143273582443PhrSn:example.org",
      "room_id": "!636q39766251:example.com",
      "sender": "@example:example.org",
      "origin_server_ts": 1432735824653,
      "unsigned": {
        "age": 1234
      }
    }
  ],
  "start": "t27-54_2_0_2",
  "state": [
    {
      "content": {
        "creator": "@example:example.org",
        "room_version": "1",
        "m.federate": true,
        "predecessor": {
          "event_id": "$something:example.org",
          "room_id": "!oldroom:example.org"
        }
      },
      "type": "m.room.create",
      "event_id": "$143273582443PhrSn:example.org",
      "room_id": "!636q39766251:example.com",
      "sender": "@example:example.org",
      "origin_server_ts": 1432735824653,
      "unsigned": {
        "age": 1234
      },
      "state_key": ""
    },
    {
      "content": {
        "membership": "join",
        "avatar_url": "mxc://example.org/SEsfnsuifSDFSSEF",
        "displayname": "Alice Margatroid"
      },
      "type": "m.room.member",
      "event_id": "$143273582443PhrSn:example.org",
      "room_id": "!636q39766251:example.com",
      "sender": "@example:example.org",
      "origin_server_ts": 1432735824653,
      "unsigned": {
        "age": 1234
      },
      "state_key": "@alice:example.org"
    }
  ]
}

Server Notices

The API to send notices is as follows:

POST /_synapse/admin/v1/send_server_notice

or:

PUT /_synapse/admin/v1/send_server_notice/{txnId}

You will need to authenticate with an access token for an admin user.

When using the PUT form, retransmissions with the same transaction ID will be ignored in the same way as with PUT /_matrix/client/r0/rooms/{roomId}/send/{eventType}/{txnId}.

The request body should look something like the following:

{
    "user_id": "@target_user:server_name",
    "content": {
        "msgtype": "m.text",
        "body": "This is my message"
    }
}

You can optionally include the following additional parameters:

  • type: the type of event. Defaults to m.room.message.
  • state_key: Setting this will result in a state event being sent.

Once the notice has been sent, the API will return the following response:

{
    "event_id": "<event_id>"
}

Note that server notices must be enabled in homeserver.yaml before this API can be used. See server_notices.md for more information.

Deprecated: Shutdown room API

The old Shutdown room API is deprecated and will be removed in a future release. See the new Delete Room API for more details.

Shuts down a room, preventing new joins and moves local users and room aliases automatically to a new room. The new room will be created with the user specified by the new_room_user_id parameter as room administrator and will contain a message explaining what happened. Users invited to the new room will have power level -10 by default, and thus be unable to speak. The old room's power levels will be changed to disallow any further invites or joins.

The local server will only have the power to move local user and room aliases to the new room. Users on other servers will be unaffected.

API

You will need to authenticate with an access token for an admin user.

URL

POST /_synapse/admin/v1/shutdown_room/{room_id}

URL Parameters

  • room_id - The ID of the room (e.g !someroom:example.com)

JSON Body Parameters

  • new_room_user_id - Required. A string representing the user ID of the user that will admin the new room that all users in the old room will be moved to.
  • room_name - Optional. A string representing the name of the room that new users will be invited to.
  • message - Optional. A string containing the first message that will be sent as new_room_user_id in the new room. Ideally this will clearly convey why the original room was shut down.

If not specified, the default value of room_name is "Content Violation Notification". The default value of message is "Sharing illegal content on othis server is not permitted and rooms in violation will be blocked."

Response Parameters

  • kicked_users - An integer number representing the number of users that were kicked.
  • failed_to_kick_users - An integer number representing the number of users that were not kicked.
  • local_aliases - An array of strings representing the local aliases that were migrated from the old room to the new.
  • new_room_id - A string representing the room ID of the new room.

Example

Request:

POST /_synapse/admin/v1/shutdown_room/!somebadroom%3Aexample.com

{
    "new_room_user_id": "@someuser:example.com",
    "room_name": "Content Violation Notification",
    "message": "Bad Room has been shutdown due to content violations on this server. Please review our Terms of Service."
}

Response:

{
    "kicked_users": 5,
    "failed_to_kick_users": 0,
    "local_aliases": ["#badroom:example.com", "#evilsaloon:example.com],
    "new_room_id": "!newroomid:example.com",
},

Undoing room shutdowns

Note: This guide may be outdated by the time you read it. By nature of room shutdowns being performed at the database level, the structure can and does change without notice.

First, it's important to understand that a room shutdown is very destructive. Undoing a shutdown is not as simple as pretending it never happened - work has to be done to move forward instead of resetting the past. In fact, in some cases it might not be possible to recover at all:

  • If the room was invite-only, your users will need to be re-invited.
  • If the room no longer has any members at all, it'll be impossible to rejoin.
  • The first user to rejoin will have to do so via an alias on a different server.

With all that being said, if you still want to try and recover the room:

  1. For safety reasons, shut down Synapse.
  2. In the database, run DELETE FROM blocked_rooms WHERE room_id = '!example:example.org';
    • For caution: it's recommended to run this in a transaction: BEGIN; DELETE ...;, verify you got 1 result, then COMMIT;.
    • The room ID is the same one supplied to the shutdown room API, not the Content Violation room.
  3. Restart Synapse.

You will have to manually handle, if you so choose, the following:

  • Aliases that would have been redirected to the Content Violation room.
  • Users that would have been booted from the room (and will have been force-joined to the Content Violation room).
  • Removal of the Content Violation room if desired.

Users' media usage statistics

Returns information about all local media usage of users. Gives the possibility to filter them by time and user.

The API is:

GET /_synapse/admin/v1/statistics/users/media

To use it, you will need to authenticate by providing an access_token for a server admin: see Admin API.

A response body like the following is returned:

{
  "users": [
    {
      "displayname": "foo_user_0",
      "media_count": 2,
      "media_length": 134,
      "user_id": "@foo_user_0:test"
    },
    {
      "displayname": "foo_user_1",
      "media_count": 2,
      "media_length": 134,
      "user_id": "@foo_user_1:test"
    }
  ],
  "next_token": 3,
  "total": 10
}

To paginate, check for next_token and if present, call the endpoint again with from set to the value of next_token. This will return a new page.

If the endpoint does not return a next_token then there are no more reports to paginate through.

Parameters

The following parameters should be set in the URL:

  • limit: string representing a positive integer - Is optional but is used for pagination, denoting the maximum number of items to return in this call. Defaults to 100.
  • from: string representing a positive integer - Is optional but used for pagination, denoting the offset in the returned results. This should be treated as an opaque value and not explicitly set to anything other than the return value of next_token from a previous call. Defaults to 0.
  • order_by - string - The method in which to sort the returned list of users. Valid values are:
    • user_id - Users are ordered alphabetically by user_id. This is the default.
    • displayname - Users are ordered alphabetically by displayname.
    • media_length - Users are ordered by the total size of uploaded media in bytes. Smallest to largest.
    • media_count - Users are ordered by number of uploaded media. Smallest to largest.
  • from_ts - string representing a positive integer - Considers only files created at this timestamp or later. Unix timestamp in ms.
  • until_ts - string representing a positive integer - Considers only files created at this timestamp or earlier. Unix timestamp in ms.
  • search_term - string - Filter users by their user ID localpart or displayname. The search term can be found in any part of the string. Defaults to no filtering.
  • dir - string - Direction of order. Either f for forwards or b for backwards. Setting this value to b will reverse the above sort order. Defaults to f.

Response

The following fields are returned in the JSON response body:

  • users - An array of objects, each containing information about the user and their local media. Objects contain the following fields:
    • displayname - string - Displayname of this user.
    • media_count - integer - Number of uploaded media by this user.
    • media_length - integer - Size of uploaded media in bytes by this user.
    • user_id - string - Fully-qualified user ID (ex. @user:server.com).
  • next_token - integer - Opaque value used for pagination. See above.
  • total - integer - Total number of users after filtering.

User Admin API

Query User Account

This API returns information about a specific user account.

The api is:

GET /_synapse/admin/v2/users/<user_id>

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

It returns a JSON body like the following:

{
    "displayname": "User",
    "threepids": [
        {
            "medium": "email",
            "address": "<user_mail_1>"
        },
        {
            "medium": "email",
            "address": "<user_mail_2>"
        }
    ],
    "avatar_url": "<avatar_url>",
    "admin": 0,
    "deactivated": 0,
    "shadow_banned": 0,
    "password_hash": "$2b$12$p9B4GkqYdRTPGD",
    "creation_ts": 1560432506,
    "appservice_id": null,
    "consent_server_notice_sent": null,
    "consent_version": null
}

URL parameters:

  • user_id: fully-qualified user id: for example, @user:server.com.

Create or modify Account

This API allows an administrator to create or modify a user account with a specific user_id.

This api is:

PUT /_synapse/admin/v2/users/<user_id>

with a body of:

{
    "password": "user_password",
    "displayname": "User",
    "threepids": [
        {
            "medium": "email",
            "address": "<user_mail_1>"
        },
        {
            "medium": "email",
            "address": "<user_mail_2>"
        }
    ],
    "avatar_url": "<avatar_url>",
    "admin": false,
    "deactivated": false
}

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

URL parameters:

  • user_id: fully-qualified user id: for example, @user:server.com.

Body parameters:

  • password, optional. If provided, the user's password is updated and all devices are logged out.

  • displayname, optional, defaults to the value of user_id.

  • threepids, optional, allows setting the third-party IDs (email, msisdn) belonging to a user.

  • avatar_url, optional, must be a MXC URI.

  • admin, optional, defaults to false.

  • deactivated, optional. If unspecified, deactivation state will be left unchanged on existing accounts and set to false for new accounts. A user cannot be erased by deactivating with this API. For details on deactivating users see Deactivate Account.

If the user already exists then optional parameters default to the current value.

In order to re-activate an account deactivated must be set to false. If users do not login via single-sign-on, a new password must be provided.

List Accounts

This API returns all local user accounts. By default, the response is ordered by ascending user ID.

GET /_synapse/admin/v2/users?from=0&limit=10&guests=false

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

A response body like the following is returned:

{
    "users": [
        {
            "name": "<user_id1>",
            "is_guest": 0,
            "admin": 0,
            "user_type": null,
            "deactivated": 0,
            "shadow_banned": 0,
            "displayname": "<User One>",
            "avatar_url": null
        }, {
            "name": "<user_id2>",
            "is_guest": 0,
            "admin": 1,
            "user_type": null,
            "deactivated": 0,
            "shadow_banned": 0,
            "displayname": "<User Two>",
            "avatar_url": "<avatar_url>"
        }
    ],
    "next_token": "100",
    "total": 200
}

To paginate, check for next_token and if present, call the endpoint again with from set to the value of next_token. This will return a new page.

If the endpoint does not return a next_token then there are no more users to paginate through.

Parameters

The following parameters should be set in the URL:

  • user_id - Is optional and filters to only return users with user IDs that contain this value. This parameter is ignored when using the name parameter.

  • name - Is optional and filters to only return users with user ID localparts or displaynames that contain this value.

  • guests - string representing a bool - Is optional and if false will exclude guest users. Defaults to true to include guest users.

  • deactivated - string representing a bool - Is optional and if true will include deactivated users. Defaults to false to exclude deactivated users.

  • limit - string representing a positive integer - Is optional but is used for pagination, denoting the maximum number of items to return in this call. Defaults to 100.

  • from - string representing a positive integer - Is optional but used for pagination, denoting the offset in the returned results. This should be treated as an opaque value and not explicitly set to anything other than the return value of next_token from a previous call. Defaults to 0.

  • order_by - The method by which to sort the returned list of users. If the ordered field has duplicates, the second order is always by ascending name, which guarantees a stable ordering. Valid values are:

    • name - Users are ordered alphabetically by name. This is the default.
    • is_guest - Users are ordered by is_guest status.
    • admin - Users are ordered by admin status.
    • user_type - Users are ordered alphabetically by user_type.
    • deactivated - Users are ordered by deactivated status.
    • shadow_banned - Users are ordered by shadow_banned status.
    • displayname - Users are ordered alphabetically by displayname.
    • avatar_url - Users are ordered alphabetically by avatar URL.

  • dir - Direction of media order. Either f for forwards or b for backwards. Setting this value to b will reverse the above sort order. Defaults to f.

Caution. The database only has indexes on the columns name and created_ts. This means that if a different sort order is used (is_guest, admin, user_type, deactivated, shadow_banned, avatar_url or displayname), this can cause a large load on the database, especially for large environments.

Response

The following fields are returned in the JSON response body:

  • users - An array of objects, each containing information about an user. User objects contain the following fields:

    • name - string - Fully-qualified user ID (ex. @user:server.com).
    • is_guest - bool - Status if that user is a guest account.
    • admin - bool - Status if that user is a server administrator.
    • user_type - string - Type of the user. Normal users are type None. This allows user type specific behaviour. There are also types support and bot.
    • deactivated - bool - Status if that user has been marked as deactivated.
    • shadow_banned - bool - Status if that user has been marked as shadow banned.
    • displayname - string - The user's display name if they have set one.
    • avatar_url - string - The user's avatar URL if they have set one.

  • next_token: string representing a positive integer - Indication for pagination. See above.

  • total - integer - Total number of media.

Query current sessions for a user

This API returns information about the active sessions for a specific user.

The endpoints are:

GET /_synapse/admin/v1/whois/<user_id>

and:

GET /_matrix/client/r0/admin/whois/<userId>

See also: Client Server API Whois.

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

It returns a JSON body like the following:

{
    "user_id": "<user_id>",
    "devices": {
        "": {
            "sessions": [
                {
                    "connections": [
                        {
                            "ip": "1.2.3.4",
                            "last_seen": 1417222374433,
                            "user_agent": "Mozilla/5.0 ..."
                        },
                        {
                            "ip": "1.2.3.10",
                            "last_seen": 1417222374500,
                            "user_agent": "Dalvik/2.1.0 ..."
                        }
                    ]
                }
            ]
        }
    }
}

last_seen is measured in milliseconds since the Unix epoch.

Deactivate Account

This API deactivates an account. It removes active access tokens, resets the password, and deletes third-party IDs (to prevent the user requesting a password reset).

It can also mark the user as GDPR-erased. This means messages sent by the user will still be visible by anyone that was in the room when these messages were sent, but hidden from users joining the room afterwards.

The api is:

POST /_synapse/admin/v1/deactivate/<user_id>

with a body of:

{
    "erase": true
}

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

The erase parameter is optional and defaults to false. An empty body may be passed for backwards compatibility.

The following actions are performed when deactivating an user:

  • Try to unpind 3PIDs from the identity server
  • Remove all 3PIDs from the homeserver
  • Delete all devices and E2EE keys
  • Delete all access tokens
  • Delete the password hash
  • Removal from all rooms the user is a member of
  • Remove the user from the user directory
  • Reject all pending invites
  • Remove all account validity information related to the user

The following additional actions are performed during deactivation if erase is set to true:

  • Remove the user's display name
  • Remove the user's avatar URL
  • Mark the user as erased

Reset password

Changes the password of another user. This will automatically log the user out of all their devices.

The api is:

POST /_synapse/admin/v1/reset_password/<user_id>

with a body of:

{
   "new_password": "<secret>",
   "logout_devices": true
}

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

The parameter new_password is required. The parameter logout_devices is optional and defaults to true.

Get whether a user is a server administrator or not

The api is:

GET /_synapse/admin/v1/users/<user_id>/admin

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

A response body like the following is returned:

{
    "admin": true
}

Change whether a user is a server administrator or not

Note that you cannot demote yourself.

The api is:

PUT /_synapse/admin/v1/users/<user_id>/admin

with a body of:

{
    "admin": true
}

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

List room memberships of a user

Gets a list of all room_id that a specific user_id is member.

The API is:

GET /_synapse/admin/v1/users/<user_id>/joined_rooms

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

A response body like the following is returned:

    {
        "joined_rooms": [
            "!DuGcnbhHGaSZQoNQR:matrix.org",
            "!ZtSaPCawyWtxfWiIy:matrix.org"
        ],
        "total": 2
    }

The server returns the list of rooms of which the user and the server are member. If the user is local, all the rooms of which the user is member are returned.

Parameters

The following parameters should be set in the URL:

  • user_id - fully qualified: for example, @user:server.com.

Response

The following fields are returned in the JSON response body:

  • joined_rooms - An array of room_id.
  • total - Number of rooms.

List media of a user

Gets a list of all local media that a specific user_id has created. By default, the response is ordered by descending creation date and ascending media ID. The newest media is on top. You can change the order with parameters order_by and dir.

The API is:

GET /_synapse/admin/v1/users/<user_id>/media

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

A response body like the following is returned:

{
  "media": [
    {
      "created_ts": 100400,
      "last_access_ts": null,
      "media_id": "qXhyRzulkwLsNHTbpHreuEgo",
      "media_length": 67,
      "media_type": "image/png",
      "quarantined_by": null,
      "safe_from_quarantine": false,
      "upload_name": "test1.png"
    },
    {
      "created_ts": 200400,
      "last_access_ts": null,
      "media_id": "FHfiSnzoINDatrXHQIXBtahw",
      "media_length": 67,
      "media_type": "image/png",
      "quarantined_by": null,
      "safe_from_quarantine": false,
      "upload_name": "test2.png"
    }
  ],
  "next_token": 3,
  "total": 2
}

To paginate, check for next_token and if present, call the endpoint again with from set to the value of next_token. This will return a new page.

If the endpoint does not return a next_token then there are no more reports to paginate through.

Parameters

The following parameters should be set in the URL:

  • user_id - string - fully qualified: for example, @user:server.com.

  • limit: string representing a positive integer - Is optional but is used for pagination, denoting the maximum number of items to return in this call. Defaults to 100.

  • from: string representing a positive integer - Is optional but used for pagination, denoting the offset in the returned results. This should be treated as an opaque value and not explicitly set to anything other than the return value of next_token from a previous call. Defaults to 0.

  • order_by - The method by which to sort the returned list of media. If the ordered field has duplicates, the second order is always by ascending media_id, which guarantees a stable ordering. Valid values are:

    • media_id - Media are ordered alphabetically by media_id.
    • upload_name - Media are ordered alphabetically by name the media was uploaded with.
    • created_ts - Media are ordered by when the content was uploaded in ms. Smallest to largest. This is the default.
    • last_access_ts - Media are ordered by when the content was last accessed in ms. Smallest to largest.
    • media_length - Media are ordered by length of the media in bytes. Smallest to largest.
    • media_type - Media are ordered alphabetically by MIME-type.
    • quarantined_by - Media are ordered alphabetically by the user ID that initiated the quarantine request for this media.
    • safe_from_quarantine - Media are ordered by the status if this media is safe from quarantining.

  • dir - Direction of media order. Either f for forwards or b for backwards. Setting this value to b will reverse the above sort order. Defaults to f.

If neither order_by nor dir is set, the default order is newest media on top (corresponds to order_by = created_ts and dir = b).

Caution. The database only has indexes on the columns media_id, user_id and created_ts. This means that if a different sort order is used (upload_name, last_access_ts, media_length, media_type, quarantined_by or safe_from_quarantine), this can cause a large load on the database, especially for large environments.

Response

The following fields are returned in the JSON response body:

  • media - An array of objects, each containing information about a media. Media objects contain the following fields:

    • created_ts - integer - Timestamp when the content was uploaded in ms.

    • last_access_ts - integer - Timestamp when the content was last accessed in ms.

    • media_id - string - The id used to refer to the media.

    • media_length - integer - Length of the media in bytes.

    • media_type - string - The MIME-type of the media.

    • quarantined_by - string - The user ID that initiated the quarantine request for this media.

    • safe_from_quarantine - bool - Status if this media is safe from quarantining.

    • upload_name - string - The name the media was uploaded with.

  • next_token: integer - Indication for pagination. See above.

  • total - integer - Total number of media.

Login as a user

Get an access token that can be used to authenticate as that user. Useful for when admins wish to do actions on behalf of a user.

The API is:

POST /_synapse/admin/v1/users/<user_id>/login
{}

An optional valid_until_ms field can be specified in the request body as an integer timestamp that specifies when the token should expire. By default tokens do not expire.

A response body like the following is returned:

{
    "access_token": "<opaque_access_token_string>"
}

This API does not generate a new device for the user, and so will not appear their /devices list, and in general the target user should not be able to tell they have been logged in as.

To expire the token call the standard /logout API with the token.

Note: The token will expire if the admin user calls /logout/all from any of their devices, but the token will not expire if the target user does the same.

User devices

List all devices

Gets information about all devices for a specific user_id.

The API is:

GET /_synapse/admin/v2/users/<user_id>/devices

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

A response body like the following is returned:

{
  "devices": [
    {
      "device_id": "QBUAZIFURK",
      "display_name": "android",
      "last_seen_ip": "1.2.3.4",
      "last_seen_ts": 1474491775024,
      "user_id": "<user_id>"
    },
    {
      "device_id": "AUIECTSRND",
      "display_name": "ios",
      "last_seen_ip": "1.2.3.5",
      "last_seen_ts": 1474491775025,
      "user_id": "<user_id>"
    }
  ],
  "total": 2
}

Parameters

The following parameters should be set in the URL:

  • user_id - fully qualified: for example, @user:server.com.

Response

The following fields are returned in the JSON response body:

  • devices - An array of objects, each containing information about a device. Device objects contain the following fields:

    • device_id - Identifier of device.
    • display_name - Display name set by the user for this device. Absent if no name has been set.
    • last_seen_ip - The IP address where this device was last seen. (May be a few minutes out of date, for efficiency reasons).
    • last_seen_ts - The timestamp (in milliseconds since the unix epoch) when this devices was last seen. (May be a few minutes out of date, for efficiency reasons).
    • user_id - Owner of device.

  • total - Total number of user's devices.

Delete multiple devices

Deletes the given devices for a specific user_id, and invalidates any access token associated with them.

The API is:

POST /_synapse/admin/v2/users/<user_id>/delete_devices

{
  "devices": [
    "QBUAZIFURK",
    "AUIECTSRND"
  ],
}

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

An empty JSON dict is returned.

Parameters

The following parameters should be set in the URL:

  • user_id - fully qualified: for example, @user:server.com.

The following fields are required in the JSON request body:

  • devices - The list of device IDs to delete.

Show a device

Gets information on a single device, by device_id for a specific user_id.

The API is:

GET /_synapse/admin/v2/users/<user_id>/devices/<device_id>

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

A response body like the following is returned:

{
  "device_id": "<device_id>",
  "display_name": "android",
  "last_seen_ip": "1.2.3.4",
  "last_seen_ts": 1474491775024,
  "user_id": "<user_id>"
}

Parameters

The following parameters should be set in the URL:

  • user_id - fully qualified: for example, @user:server.com.
  • device_id - The device to retrieve.

Response

The following fields are returned in the JSON response body:

  • device_id - Identifier of device.
  • display_name - Display name set by the user for this device. Absent if no name has been set.
  • last_seen_ip - The IP address where this device was last seen. (May be a few minutes out of date, for efficiency reasons).
  • last_seen_ts - The timestamp (in milliseconds since the unix epoch) when this devices was last seen. (May be a few minutes out of date, for efficiency reasons).
  • user_id - Owner of device.

Update a device

Updates the metadata on the given device_id for a specific user_id.

The API is:

PUT /_synapse/admin/v2/users/<user_id>/devices/<device_id>

{
  "display_name": "My other phone"
}

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

An empty JSON dict is returned.

Parameters

The following parameters should be set in the URL:

  • user_id - fully qualified: for example, @user:server.com.
  • device_id - The device to update.

The following fields are required in the JSON request body:

  • display_name - The new display name for this device. If not given, the display name is unchanged.

Delete a device

Deletes the given device_id for a specific user_id, and invalidates any access token associated with it.

The API is:

DELETE /_synapse/admin/v2/users/<user_id>/devices/<device_id>

{}

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

An empty JSON dict is returned.

Parameters

The following parameters should be set in the URL:

  • user_id - fully qualified: for example, @user:server.com.
  • device_id - The device to delete.

List all pushers

Gets information about all pushers for a specific user_id.

The API is:

GET /_synapse/admin/v1/users/<user_id>/pushers

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

A response body like the following is returned:

{
  "pushers": [
    {
      "app_display_name":"HTTP Push Notifications",
      "app_id":"m.http",
      "data": {
        "url":"example.com"
      },
      "device_display_name":"pushy push",
      "kind":"http",
      "lang":"None",
      "profile_tag":"",
      "pushkey":"a@example.com"
    }
  ],
  "total": 1
}

Parameters

The following parameters should be set in the URL:

  • user_id - fully qualified: for example, @user:server.com.

Response

The following fields are returned in the JSON response body:

  • pushers - An array containing the current pushers for the user

    • app_display_name - string - A string that will allow the user to identify what application owns this pusher.

    • app_id - string - This is a reverse-DNS style identifier for the application. Max length, 64 chars.

    • data - A dictionary of information for the pusher implementation itself.

      • url - string - Required if kind is http. The URL to use to send notifications to.

      • format - string - The format to use when sending notifications to the Push Gateway.

    • device_display_name - string - A string that will allow the user to identify what device owns this pusher.

    • profile_tag - string - This string determines which set of device specific rules this pusher executes.

    • kind - string - The kind of pusher. "http" is a pusher that sends HTTP pokes.

    • lang - string - The preferred language for receiving notifications (e.g. 'en' or 'en-US')

    • profile_tag - string - This string determines which set of device specific rules this pusher executes.

    • pushkey - string - This is a unique identifier for this pusher. Max length, 512 bytes.

  • total - integer - Number of pushers.

See also the Client-Server API Spec on pushers.

Shadow-banning users

Shadow-banning is a useful tool for moderating malicious or egregiously abusive users. A shadow-banned users receives successful responses to their client-server API requests, but the events are not propagated into rooms. This can be an effective tool as it (hopefully) takes longer for the user to realise they are being moderated before pivoting to another account.

Shadow-banning a user should be used as a tool of last resort and may lead to confusing or broken behaviour for the client. A shadow-banned user will not receive any notification and it is generally more appropriate to ban or kick abusive users. A shadow-banned user will be unable to contact anyone on the server.

The API is:

POST /_synapse/admin/v1/users/<user_id>/shadow_ban

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

An empty JSON dict is returned.

Parameters

The following parameters should be set in the URL:

  • user_id - The fully qualified MXID: for example, @user:server.com. The user must be local.

Override ratelimiting for users

This API allows to override or disable ratelimiting for a specific user. There are specific APIs to set, get and delete a ratelimit.

Get status of ratelimit

The API is:

GET /_synapse/admin/v1/users/<user_id>/override_ratelimit

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

A response body like the following is returned:

{
  "messages_per_second": 0,
  "burst_count": 0
}

Parameters

The following parameters should be set in the URL:

  • user_id - The fully qualified MXID: for example, @user:server.com. The user must be local.

Response

The following fields are returned in the JSON response body:

  • messages_per_second - integer - The number of actions that can be performed in a second. 0 mean that ratelimiting is disabled for this user.
  • burst_count - integer - How many actions that can be performed before being limited.

If no custom ratelimit is set, an empty JSON dict is returned.

{}

Set ratelimit

The API is:

POST /_synapse/admin/v1/users/<user_id>/override_ratelimit

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

A response body like the following is returned:

{
  "messages_per_second": 0,
  "burst_count": 0
}

Parameters

The following parameters should be set in the URL:

  • user_id - The fully qualified MXID: for example, @user:server.com. The user must be local.

Body parameters:

  • messages_per_second - positive integer, optional. The number of actions that can be performed in a second. Defaults to 0.
  • burst_count - positive integer, optional. How many actions that can be performed before being limited. Defaults to 0.

To disable users' ratelimit set both values to 0.

Response

The following fields are returned in the JSON response body:

  • messages_per_second - integer - The number of actions that can be performed in a second.
  • burst_count - integer - How many actions that can be performed before being limited.

Delete ratelimit

The API is:

DELETE /_synapse/admin/v1/users/<user_id>/override_ratelimit

To use it, you will need to authenticate by providing an access_token for a server admin: Admin API

An empty JSON dict is returned.

{}

Parameters

The following parameters should be set in the URL:

  • user_id - The fully qualified MXID: for example, @user:server.com. The user must be local.

Version API

This API returns the running Synapse version and the Python version on which Synapse is being run. This is useful when a Synapse instance is behind a proxy that does not forward the 'Server' header (which also contains Synapse version information).

The api is:

GET /_synapse/admin/v1/server_version

It returns a JSON body like the following:

{
    "server_version": "0.99.2rc1 (b=develop, abcdef123)",
    "python_version": "3.6.8"
}

Using the synapse manhole

The "manhole" allows server administrators to access a Python shell on a running Synapse installation. This is a very powerful mechanism for administration and debugging.

Security Warning

Note that this will give administrative access to synapse to all users with shell access to the server. It should therefore not be enabled in environments where untrusted users have shell access.

To enable it, first uncomment the manhole listener configuration in homeserver.yaml. The configuration is slightly different if you're using docker.

Docker config

If you are using Docker, set bind_addresses to ['0.0.0.0'] as shown:

listeners:
  - port: 9000
    bind_addresses: ['0.0.0.0']
    type: manhole

When using docker run to start the server, you will then need to change the command to the following to include the manhole port forwarding. The -p 127.0.0.1:9000:9000 below is important: it ensures that access to the manhole is only possible for local users.

docker run -d --name synapse \
    --mount type=volume,src=synapse-data,dst=/data \
    -p 8008:8008 \
    -p 127.0.0.1:9000:9000 \
    matrixdotorg/synapse:latest

Native config

If you are not using docker, set bind_addresses to ['::1', '127.0.0.1'] as shown. The bind_addresses in the example below is important: it ensures that access to the manhole is only possible for local users).

listeners:
  - port: 9000
    bind_addresses: ['::1', '127.0.0.1']
    type: manhole

Accessing synapse manhole

Then restart synapse, and point an ssh client at port 9000 on localhost, using the username matrix:

ssh -p9000 matrix@localhost

The password is rabbithole.

This gives a Python REPL in which hs gives access to the synapse.server.HomeServer object - which in turn gives access to many other parts of the process.

Note that any call which returns a coroutine will need to be wrapped in ensureDeferred.

As a simple example, retrieving an event from the database:

>>> from twisted.internet import defer
>>> defer.ensureDeferred(hs.get_datastore().get_event('$1416420717069yeQaw:matrix.org'))
<Deferred at 0x7ff253fc6998 current result: <FrozenEvent event_id='$1416420717069yeQaw:matrix.org', type='m.room.create', state_key=''>>

How to monitor Synapse metrics using Prometheus

  1. Install Prometheus:

    Follow instructions at http://prometheus.io/docs/introduction/install/

  2. Enable Synapse metrics:

    There are two methods of enabling metrics in Synapse.

    The first serves the metrics as a part of the usual web server and can be enabled by adding the "metrics" resource to the existing listener as such:

      resources:
    - names:
      - client
      - metrics

    This provides a simple way of adding metrics to your Synapse installation, and serves under /_synapse/metrics. If you do not wish your metrics be publicly exposed, you will need to either filter it out at your load balancer, or use the second method.

    The second method runs the metrics server on a different port, in a different thread to Synapse. This can make it more resilient to heavy load meaning metrics cannot be retrieved, and can be exposed to just internal networks easier. The served metrics are available over HTTP only, and will be available at /_synapse/metrics.

    Add a new listener to homeserver.yaml:

      listeners:
    - type: metrics
      port: 9000
      bind_addresses:
        - '0.0.0.0'

    For both options, you will need to ensure that enable_metrics is set to True.

  3. Restart Synapse.

  4. Add a Prometheus target for Synapse.

    It needs to set the metrics_path to a non-default value (under scrape_configs):

      - job_name: "synapse"
    scrape_interval: 15s
    metrics_path: "/_synapse/metrics"
    static_configs:
      - targets: ["my.server.here:port"]

    where my.server.here is the IP address of Synapse, and port is the listener port configured with the metrics resource.

    If your prometheus is older than 1.5.2, you will need to replace static_configs in the above with target_groups.

  5. Restart Prometheus.

  6. Consider using the grafana dashboard and required recording rules

Monitoring workers

To monitor a Synapse installation using workers, every worker needs to be monitored independently, in addition to the main homeserver process. This is because workers don't send their metrics to the main homeserver process, but expose them directly (if they are configured to do so).

To allow collecting metrics from a worker, you need to add a metrics listener to its configuration, by adding the following under worker_listeners:

  - type: metrics
    bind_address: ''
    port: 9101

The bind_address and port parameters should be set so that the resulting listener can be reached by prometheus, and they don't clash with an existing worker. With this example, the worker's metrics would then be available on http://127.0.0.1:9101.

Example Prometheus target for Synapse with workers:

  - job_name: "synapse"
    scrape_interval: 15s
    metrics_path: "/_synapse/metrics"
    static_configs:
      - targets: ["my.server.here:port"]
        labels:
          instance: "my.server"
          job: "master"
          index: 1
      - targets: ["my.workerserver.here:port"]
        labels:
          instance: "my.server"
          job: "generic_worker"
          index: 1
      - targets: ["my.workerserver.here:port"]
        labels:
          instance: "my.server"
          job: "generic_worker"
          index: 2
      - targets: ["my.workerserver.here:port"]
        labels:
          instance: "my.server"
          job: "media_repository"
          index: 1

Labels (instance, job, index) can be defined as anything. The labels are used to group graphs in grafana.

Renaming of metrics & deprecation of old names in 1.2

Synapse 1.2 updates the Prometheus metrics to match the naming convention of the upstream prometheus_client. The old names are considered deprecated and will be removed in a future version of Synapse.

New NameOld Name
python_gc_objects_collected_totalpython_gc_objects_collected
python_gc_objects_uncollectable_totalpython_gc_objects_uncollectable
python_gc_collections_totalpython_gc_collections
process_cpu_seconds_totalprocess_cpu_seconds
synapse_federation_client_sent_transactions_totalsynapse_federation_client_sent_transactions
synapse_federation_client_events_processed_totalsynapse_federation_client_events_processed
synapse_event_processing_loop_count_totalsynapse_event_processing_loop_count
synapse_event_processing_loop_room_count_totalsynapse_event_processing_loop_room_count
synapse_util_metrics_block_count_totalsynapse_util_metrics_block_count
synapse_util_metrics_block_time_seconds_totalsynapse_util_metrics_block_time_seconds
synapse_util_metrics_block_ru_utime_seconds_totalsynapse_util_metrics_block_ru_utime_seconds
synapse_util_metrics_block_ru_stime_seconds_totalsynapse_util_metrics_block_ru_stime_seconds
synapse_util_metrics_block_db_txn_count_totalsynapse_util_metrics_block_db_txn_count
synapse_util_metrics_block_db_txn_duration_seconds_totalsynapse_util_metrics_block_db_txn_duration_seconds
synapse_util_metrics_block_db_sched_duration_seconds_totalsynapse_util_metrics_block_db_sched_duration_seconds
synapse_background_process_start_count_totalsynapse_background_process_start_count
synapse_background_process_ru_utime_seconds_totalsynapse_background_process_ru_utime_seconds
synapse_background_process_ru_stime_seconds_totalsynapse_background_process_ru_stime_seconds
synapse_background_process_db_txn_count_totalsynapse_background_process_db_txn_count
synapse_background_process_db_txn_duration_seconds_totalsynapse_background_process_db_txn_duration_seconds
synapse_background_process_db_sched_duration_seconds_totalsynapse_background_process_db_sched_duration_seconds
synapse_storage_events_persisted_events_totalsynapse_storage_events_persisted_events
synapse_storage_events_persisted_events_sep_totalsynapse_storage_events_persisted_events_sep
synapse_storage_events_state_delta_totalsynapse_storage_events_state_delta
synapse_storage_events_state_delta_single_event_totalsynapse_storage_events_state_delta_single_event
synapse_storage_events_state_delta_reuse_delta_totalsynapse_storage_events_state_delta_reuse_delta
synapse_federation_server_received_pdus_totalsynapse_federation_server_received_pdus
synapse_federation_server_received_edus_totalsynapse_federation_server_received_edus
synapse_handler_presence_notified_presence_totalsynapse_handler_presence_notified_presence
synapse_handler_presence_federation_presence_out_totalsynapse_handler_presence_federation_presence_out
synapse_handler_presence_presence_updates_totalsynapse_handler_presence_presence_updates
synapse_handler_presence_timers_fired_totalsynapse_handler_presence_timers_fired
synapse_handler_presence_federation_presence_totalsynapse_handler_presence_federation_presence
synapse_handler_presence_bump_active_time_totalsynapse_handler_presence_bump_active_time
synapse_federation_client_sent_edus_totalsynapse_federation_client_sent_edus
synapse_federation_client_sent_pdu_destinations_count_totalsynapse_federation_client_sent_pdu_destinations:count
synapse_federation_client_sent_pdu_destinations_totalsynapse_federation_client_sent_pdu_destinations:total
synapse_handlers_appservice_events_processed_totalsynapse_handlers_appservice_events_processed
synapse_notifier_notified_events_totalsynapse_notifier_notified_events
synapse_push_bulk_push_rule_evaluator_push_rules_invalidation_counter_totalsynapse_push_bulk_push_rule_evaluator_push_rules_invalidation_counter
synapse_push_bulk_push_rule_evaluator_push_rules_state_size_counter_totalsynapse_push_bulk_push_rule_evaluator_push_rules_state_size_counter
synapse_http_httppusher_http_pushes_processed_totalsynapse_http_httppusher_http_pushes_processed
synapse_http_httppusher_http_pushes_failed_totalsynapse_http_httppusher_http_pushes_failed
synapse_http_httppusher_badge_updates_processed_totalsynapse_http_httppusher_badge_updates_processed
synapse_http_httppusher_badge_updates_failed_totalsynapse_http_httppusher_badge_updates_failed

Removal of deprecated metrics & time based counters becoming histograms in 0.31.0

The duplicated metrics deprecated in Synapse 0.27.0 have been removed.

All time duration-based metrics have been changed to be seconds. This affects:

msec -> sec metrics
python_gc_time
python_twisted_reactor_tick_time
synapse_storage_query_time
synapse_storage_schedule_time
synapse_storage_transaction_time

Several metrics have been changed to be histograms, which sort entries into buckets and allow better analysis. The following metrics are now histograms:

Altered metrics
python_gc_time
python_twisted_reactor_pending_calls
python_twisted_reactor_tick_time
synapse_http_server_response_time_seconds
synapse_storage_query_time
synapse_storage_schedule_time
synapse_storage_transaction_time

Block and response metrics renamed for 0.27.0

Synapse 0.27.0 begins the process of rationalising the duplicate *:count metrics reported for the resource tracking for code blocks and HTTP requests.

At the same time, the corresponding *:total metrics are being renamed, as the :total suffix no longer makes sense in the absence of a corresponding :count metric.

To enable a graceful migration path, this release just adds new names for the metrics being renamed. A future release will remove the old ones.

The following table shows the new metrics, and the old metrics which they are replacing.

New nameOld name
synapse_util_metrics_block_countsynapse_util_metrics_block_timer:count
synapse_util_metrics_block_countsynapse_util_metrics_block_ru_utime:count
synapse_util_metrics_block_countsynapse_util_metrics_block_ru_stime:count
synapse_util_metrics_block_countsynapse_util_metrics_block_db_txn_count:count
synapse_util_metrics_block_countsynapse_util_metrics_block_db_txn_duration:count
synapse_util_metrics_block_time_secondssynapse_util_metrics_block_timer:total
synapse_util_metrics_block_ru_utime_secondssynapse_util_metrics_block_ru_utime:total
synapse_util_metrics_block_ru_stime_secondssynapse_util_metrics_block_ru_stime:total
synapse_util_metrics_block_db_txn_countsynapse_util_metrics_block_db_txn_count:total
synapse_util_metrics_block_db_txn_duration_secondssynapse_util_metrics_block_db_txn_duration:total
synapse_http_server_response_countsynapse_http_server_requests
synapse_http_server_response_countsynapse_http_server_response_time:count
synapse_http_server_response_countsynapse_http_server_response_ru_utime:count
synapse_http_server_response_countsynapse_http_server_response_ru_stime:count
synapse_http_server_response_countsynapse_http_server_response_db_txn_count:count
synapse_http_server_response_countsynapse_http_server_response_db_txn_duration:count
synapse_http_server_response_time_secondssynapse_http_server_response_time:total
synapse_http_server_response_ru_utime_secondssynapse_http_server_response_ru_utime:total
synapse_http_server_response_ru_stime_secondssynapse_http_server_response_ru_stime:total
synapse_http_server_response_db_txn_countsynapse_http_server_response_db_txn_count:total
synapse_http_server_response_db_txn_duration_secondssynapse_http_server_response_db_txn_duration:total

Standard Metric Names

As of synapse version 0.18.2, the format of the process-wide metrics has been changed to fit prometheus standard naming conventions. Additionally the units have been changed to seconds, from miliseconds.

New nameOld name
process_cpu_user_seconds_totalprocess_resource_utime / 1000
process_cpu_system_seconds_totalprocess_resource_stime / 1000
process_open_fds (no 'type' label)process_fds

The python-specific counts of garbage collector performance have been renamed.

New nameOld name
python_gc_timereactor_gc_time
python_gc_unreachable_totalreactor_gc_unreachable
python_gc_countsreactor_gc_counts

The twisted-specific reactor metrics have been renamed.

New nameOld name
python_twisted_reactor_pending_callsreactor_pending_calls
python_twisted_reactor_tick_timereactor_tick_time

Request log format

HTTP request logs are written by synapse (see site.py for details).

See the following for how to decode the dense data available from the default logging configuration.

2020-10-01 12:00:00,000 - synapse.access.http.8008 - 311 - INFO - PUT-1000- 192.168.0.1 - 8008 - {another-matrix-server.com} Processed request: 0.100sec/-0.000sec (0.000sec, 0.000sec) (0.001sec/0.090sec/3) 11B !200 "PUT /_matrix/federation/v1/send/1600000000000 HTTP/1.1" "Synapse/1.20.1" [0 dbevts]
-AAAAAAAAAAAAAAAAAAAAA-   -BBBBBBBBBBBBBBBBBBBBBB-   -C-   -DD-   -EEEEEE-  -FFFFFFFFF-   -GG-    -HHHHHHHHHHHHHHHHHHHHHHH-                     -IIIIII- -JJJJJJJ-  -KKKKKK-, -LLLLLL-  -MMMMMMM- -NNNNNN- O  -P- -QQ-  -RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR-   -SSSSSSSSSSSS-   -TTTTTT-
PartExplanation
AAAATimestamp request was logged (not recieved)
BBBBLogger name (synapse.access.(http\|https).<tag>, where 'tag' is defined in the listeners config section, normally the port)
CCCCLine number in code
DDDDLog Level
EEEERequest Identifier (This identifier is shared by related log lines)
FFFFSource IP (Or X-Forwarded-For if enabled)
GGGGServer Port
HHHHFederated Server or Local User making request (blank if unauthenticated or not supplied)
IIIITotal Time to process the request
JJJJTime to send response over network once generated (this may be negative if the socket is closed before the response is generated)
KKKKUserland CPU time
LLLLSystem CPU time
MMMMTotal time waiting for a free DB connection from the pool across all parallel DB work from this request
NNNNTotal time waiting for response to DB queries across all parallel DB work from this request
OOOOCount of DB transactions performed
PPPPResponse body size
QQQQResponse status code (prefixed with ! if the socket was closed before the response was generated)
RRRRRequest
SSSSUser-agent
TTTTEvents fetched from DB to service this request (note that this does not include events fetched from the cache)

MMMM / NNNN can be greater than IIII if there are multiple slow database queries running in parallel.

Some actions can result in multiple identical http requests, which will return the same data, but only the first request will report time/transactions in KKKK/LLLL/MMMM/NNNN/OOOO - the others will be awaiting the first query to return a response and will simultaneously return with the first request, but with very small processing times.

Contributing

Welcome to Synapse

This document aims to get you started with contributing to this repo!

1. Who can contribute to Synapse?

Everyone is welcome to contribute code to matrix.org projects, provided that they are willing to license their contributions under the same license as the project itself. We follow a simple 'inbound=outbound' model for contributions: the act of submitting an 'inbound' contribution means that the contributor agrees to license the code under the same terms as the project's overall 'outbound' license - in our case, this is almost always Apache Software License v2 (see LICENSE).

2. What do I need?

The code of Synapse is written in Python 3. To do pretty much anything, you'll need a recent version of Python 3.

The source code of Synapse is hosted on GitHub. You will also need a recent version of git.

For some tests, you will need a recent version of Docker.

3. Get the source.

The preferred and easiest way to contribute changes is to fork the relevant project on GitHub, and then create a pull request to ask us to pull your changes into our repo.

Please base your changes on the develop branch.

git clone git@github.com:YOUR_GITHUB_USER_NAME/synapse.git
git checkout develop

If you need help getting started with git, this is beyond the scope of the document, but you can find many good git tutorials on the web.

4. Install the dependencies

Under Unix (macOS, Linux, BSD, ...)

Once you have installed Python 3 and added the source, please open a terminal and setup a virtualenv, as follows:

cd path/where/you/have/cloned/the/repository
python3 -m venv ./env
source ./env/bin/activate
pip install -e ".[all,lint,mypy,test]"
pip install tox

This will install the developer dependencies for the project.

Under Windows

TBD

5. Get in touch.

Join our developer community on Matrix: #synapse-dev:matrix.org !

6. Pick an issue.

Fix your favorite problem or perhaps find a Good First Issue to work on.

7. Turn coffee and documentation into code and documentation!

Synapse's code style is documented here. Please follow it, including the conventions for the sample configuration file.

There is a growing amount of documentation located in the docs directory. This documentation is intended primarily for sysadmins running their own Synapse instance, as well as developers interacting externally with Synapse. docs/dev exists primarily to house documentation for Synapse developers. docs/admin_api houses documentation regarding Synapse's Admin API, which is used mostly by sysadmins and external service developers.

If you add new files added to either of these folders, please use GitHub-Flavoured Markdown.

Some documentation also exists in Synapse's GitHub Wiki, although this is primarily contributed to by community authors.

8. Test, test, test!

While you're developing and before submitting a patch, you'll want to test your code.

Run the linters.

The linters look at your code and do two things:

  • ensure that your code follows the coding style adopted by the project;
  • catch a number of errors in your code.

They're pretty fast, don't hesitate!

source ./env/bin/activate
./scripts-dev/lint.sh

Note that this script will modify your files to fix styling errors. Make sure that you have saved all your files.

If you wish to restrict the linters to only the files changed since the last commit (much faster!), you can instead run:

source ./env/bin/activate
./scripts-dev/lint.sh -d

Or if you know exactly which files you wish to lint, you can instead run:

source ./env/bin/activate
./scripts-dev/lint.sh path/to/file1.py path/to/file2.py path/to/folder

Run the unit tests.

The unit tests run parts of Synapse, including your changes, to see if anything was broken. They are slower than the linters but will typically catch more errors.

source ./env/bin/activate
trial tests

If you wish to only run some unit tests, you may specify another module instead of tests - or a test class or a method:

source ./env/bin/activate
trial tests.rest.admin.test_room tests.handlers.test_admin.ExfiltrateData.test_invite

If your tests fail, you may wish to look at the logs (the default log level is ERROR):

less _trial_temp/test.log

To increase the log level for the tests, set SYNAPSE_TEST_LOG_LEVEL:

SYNAPSE_TEST_LOG_LEVEL=DEBUG trial tests

Run the integration tests.

The integration tests are a more comprehensive suite of tests. They run a full version of Synapse, including your changes, to check if anything was broken. They are slower than the unit tests but will typically catch more errors.

The following command will let you run the integration test with the most common configuration:

$ docker run --rm -it -v /path/where/you/have/cloned/the/repository\:/src:ro -v /path/to/where/you/want/logs\:/logs matrixdotorg/sytest-synapse:py37

This configuration should generally cover your needs. For more details about other configurations, see documentation in the SyTest repo.

9. Submit your patch.

Once you're happy with your patch, it's time to prepare a Pull Request.

To prepare a Pull Request, please:

  1. verify that all the tests pass, including the coding style;
  2. sign off your contribution;
  3. git push your commit to your fork of Synapse;
  4. on GitHub, create the Pull Request;
  5. add a changelog entry and push it to your Pull Request;
  6. for most contributors, that's all - however, if you are a member of the organization matrix-org, on GitHub, please request a review from matrix.org / Synapse Core.

Changelog

All changes, even minor ones, need a corresponding changelog / newsfragment entry. These are managed by Towncrier.

To create a changelog entry, make a new file in the changelog.d directory named in the format of PRnumber.type. The type can be one of the following:

  • feature
  • bugfix
  • docker (for updates to the Docker image)
  • doc (for updates to the documentation)
  • removal (also used for deprecations)
  • misc (for internal-only changes)

This file will become part of our changelog at the next release, so the content of the file should be a short description of your change in the same style as the rest of the changelog. The file can contain Markdown formatting, and should end with a full stop (.) or an exclamation mark (!) for consistency.

Adding credits to the changelog is encouraged, we value your contributions and would like to have you shouted out in the release notes!

For example, a fix in PR #1234 would have its changelog entry in changelog.d/1234.bugfix, and contain content like:

The security levels of Florbs are now validated when received via the /federation/florb endpoint. Contributed by Jane Matrix.

If there are multiple pull requests involved in a single bugfix/feature/etc, then the content for each changelog.d file should be the same. Towncrier will merge the matching files together into a single changelog entry when we come to release.

How do I know what to call the changelog file before I create the PR?

Obviously, you don't know if you should call your newsfile 1234.bugfix or 5678.bugfix until you create the PR, which leads to a chicken-and-egg problem.

There are two options for solving this:

  1. Open the PR without a changelog file, see what number you got, and then add the changelog file to your branch (see Updating your pull request), or:

  2. Look at the list of all issues/PRs, add one to the highest number you see, and quickly open the PR before somebody else claims your number.

    This script might be helpful if you find yourself doing this a lot.

Sorry, we know it's a bit fiddly, but it's really helpful for us when we come to put together a release!

Debian changelog

Changes which affect the debian packaging files (in debian) are an exception to the rule that all changes require a changelog.d file.

In this case, you will need to add an entry to the debian changelog for the next release. For this, run the following command:

dch

This will make up a new version number (if there isn't already an unreleased version in flight), and open an editor where you can add a new changelog entry. (Our release process will ensure that the version number and maintainer name is corrected for the release.)

If your change affects both the debian packaging and files outside the debian directory, you will need both a regular newsfragment and an entry in the debian changelog. (Though typically such changes should be submitted as two separate pull requests.)

Sign off

In order to have a concrete record that your contribution is intentional and you agree to license it under the same terms as the project's license, we've adopted the same lightweight approach that the Linux Kernel submitting patches process, Docker, and many other projects use: the DCO (Developer Certificate of Origin: http://developercertificate.org/). This is a simple declaration that you wrote the contribution or otherwise have the right to contribute it to Matrix:

Developer Certificate of Origin
Version 1.1

Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
660 York Street, Suite 102,
San Francisco, CA 94110 USA

Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.

Developer's Certificate of Origin 1.1

By making a contribution to this project, I certify that:

(a) The contribution was created in whole or in part by me and I
    have the right to submit it under the open source license
    indicated in the file; or

(b) The contribution is based upon previous work that, to the best
    of my knowledge, is covered under an appropriate open source
    license and I have the right under that license to submit that
    work with modifications, whether created in whole or in part
    by me, under the same open source license (unless I am
    permitted to submit under a different license), as indicated
    in the file; or

(c) The contribution was provided directly to me by some other
    person who certified (a), (b) or (c) and I have not modified
    it.

(d) I understand and agree that this project and the contribution
    are public and that a record of the contribution (including all
    personal information I submit with it, including my sign-off) is
    maintained indefinitely and may be redistributed consistent with
    this project or the open source license(s) involved.

If you agree to this for your contribution, then all that's needed is to include the line in your commit or pull request comment:

Signed-off-by: Your Name <your@email.example.org>

We accept contributions under a legally identifiable name, such as your name on government documentation or common-law names (names claimed by legitimate usage or repute). Unfortunately, we cannot accept anonymous contributions at this time.

Git allows you to add this signoff automatically when using the -s flag to git commit, which uses the name and email set in your user.name and user.email git configs.

10. Turn feedback into better code.

Once the Pull Request is opened, you will see a few things:

  1. our automated CI (Continuous Integration) pipeline will run (again) the linters, the unit tests, the integration tests and more;
  2. one or more of the developers will take a look at your Pull Request and offer feedback.

From this point, you should:

  1. Look at the results of the CI pipeline.
    • If there is any error, fix the error.
  2. If a developer has requested changes, make these changes and let us know if it is ready for a developer to review again.
  3. Create a new commit with the changes.
    • Please do NOT overwrite the history. New commits make the reviewer's life easier.
    • Push this commits to your Pull Request.
  4. Back to 1.

Once both the CI and the developers are happy, the patch will be merged into Synapse and released shortly!

11. Find a new issue.

By now, you know the drill!

Notes for maintainers on merging PRs etc

There are some notes for those with commit access to the project on how we manage git here.

Conclusion

That's it! Matrix is a very open and collaborative project as you might expect given our obsession with open communication. If we're going to successfully matrix together all the fragmented communication technologies out there we are reliant on contributions and collaboration from the community to do so. So please get involved - and we hope you have as much fun hacking on Matrix as we do!

Code Style

Formatting tools

The Synapse codebase uses a number of code formatting tools in order to quickly and automatically check for formatting (and sometimes logical) errors in code.

The necessary tools are detailed below.

First install them with:

pip install -e ".[lint,mypy]"

  • black

    The Synapse codebase uses black as an opinionated code formatter, ensuring all comitted code is properly formatted.

    Have black auto-format your code (it shouldn't change any functionality) with:

    black . --exclude="\.tox|build|env"

  • flake8

    flake8 is a code checking tool. We require code to pass flake8 before being merged into the codebase.

    Check all application and test code with:

    flake8 synapse tests

  • isort

    isort ensures imports are nicely formatted, and can suggest and auto-fix issues such as double-importing.

    Auto-fix imports with:

    isort -rc synapse tests

    -rc means to recursively search the given directories.

It's worth noting that modern IDEs and text editors can run these tools automatically on save. It may be worth looking into whether this functionality is supported in your editor for a more convenient development workflow. It is not, however, recommended to run flake8 on save as it takes a while and is very resource intensive.

General rules

  • Naming:
    • Use camel case for class and type names
    • Use underscores for functions and variables.
  • Docstrings: should follow the google code style. See the examples in the sphinx documentation.
  • Imports:

    • Imports should be sorted by isort as described above.

    • Prefer to import classes and functions rather than packages or modules.

      Example:

      from synapse.types import UserID
...
user_id = UserID(local, server)

      is preferred over:

      from synapse import types
...
user_id = types.UserID(local, server)

      (or any other variant).

      This goes against the advice in the Google style guide, but it means that errors in the name are caught early (at import time).

    • Avoid wildcard imports (from synapse.types import *) and relative imports (from .types import UserID).

Configuration file format

The sample configuration file acts as a reference to Synapse's configuration options for server administrators. Remember that many readers will be unfamiliar with YAML and server administration in general, so that it is important that the file be as easy to understand as possible, which includes following a consistent format.

Some guidelines follow:

  • Sections should be separated with a heading consisting of a single line prefixed and suffixed with ##. There should be two blank lines before the section header, and one after.

  • Each option should be listed in the file with the following format:

    • A comment describing the setting. Each line of this comment should be prefixed with a hash (#) and a space.

      The comment should describe the default behaviour (ie, what happens if the setting is omitted), as well as what the effect will be if the setting is changed.

      Often, the comment end with something like "uncomment the following to ".

    • A line consisting of only #.

    • A commented-out example setting, prefixed with only #.

      For boolean (on/off) options, convention is that this example should be the opposite to the default (so the comment will end with "Uncomment the following to enable [or disable] ." For other options, the example should give some non-default value which is likely to be useful to the reader.

  • There should be a blank line between each option.

  • Where several settings are grouped into a single dict, avoid the convention where the whole block is commented out, resulting in comment lines starting # #, as this is hard to read and confusing to edit. Instead, leave the top-level config option uncommented, and follow the conventions above for sub-options. Ensure that your code correctly handles the top-level option being set to None (as it will be if no sub-options are enabled).

  • Lines should be wrapped at 80 characters.

  • Use two-space indents.

  • true and false are spelt thus (as opposed to True, etc.)

  • Use single quotes (') rather than double-quotes (") or backticks (`) to refer to configuration options.

Example:

## Frobnication ##

# The frobnicator will ensure that all requests are fully frobnicated.
# To enable it, uncomment the following.
#
#frobnicator_enabled: true

# By default, the frobnicator will frobnicate with the default frobber.
# The following will make it use an alternative frobber.
#
#frobincator_frobber: special_frobber

# Settings for the frobber
#
frobber:
  # frobbing speed. Defaults to 1.
  #
  #speed: 10

  # frobbing distance. Defaults to 1000.
  #
  #distance: 100

Note that the sample configuration is generated from the synapse code and is maintained by a script, scripts-dev/generate_sample_config. Making sure that the output from this script matches the desired format is left as an exercise for the reader!

Some notes on how we use git

On keeping the commit history clean

In an ideal world, our git commit history would be a linear progression of commits each of which contains a single change building on what came before. Here, by way of an arbitrary example, is the top of git log --graph b2dba0607:

clean git graph

Note how the commit comment explains clearly what is changing and why. Also note the absence of merge commits, as well as the absence of commits called things like (to pick a few culprits): “pep8”, “fix broken test”, “oops”, “typo”, or “Who's the president?”.

There are a number of reasons why keeping a clean commit history is a good thing:

  • From time to time, after a change lands, it turns out to be necessary to revert it, or to backport it to a release branch. Those operations are much easier when the change is contained in a single commit.

  • Similarly, it's much easier to answer questions like “is the fix for /publicRooms on the release branch?” if that change consists of a single commit.

  • Likewise: “what has changed on this branch in the last week?” is much clearer without merges and “pep8” commits everywhere.

  • Sometimes we need to figure out where a bug got introduced, or some behaviour changed. One way of doing that is with git bisect: pick an arbitrary commit between the known good point and the known bad point, and see how the code behaves. However, that strategy fails if the commit you chose is the middle of someone's epic branch in which they broke the world before putting it back together again.

One counterargument is that it is sometimes useful to see how a PR evolved as it went through review cycles. This is true, but that information is always available via the GitHub UI (or via the little-known refs/pull namespace).

Of course, in reality, things are more complicated than that. We have release branches as well as develop and master, and we deliberately merge changes between them. Bugs often slip through and have to be fixed later. That's all fine: this not a cast-iron rule which must be obeyed, but an ideal to aim towards.

Merges, squashes, rebases: wtf?

Ok, so that's what we'd like to achieve. How do we achieve it?

The TL;DR is: when you come to merge a pull request, you probably want to “squash and merge”:

squash and merge.

(This applies whether you are merging your own PR, or that of another contributor.)

“Squash and merge”1 takes all of the changes in the PR, and bundles them into a single commit. GitHub gives you the opportunity to edit the commit message before you confirm, and normally you should do so, because the default will be useless (again: * woops typo is not a useful thing to keep in the historical record).

The main problem with this approach comes when you have a series of pull requests which build on top of one another: as soon as you squash-merge the first PR, you'll end up with a stack of conflicts to resolve in all of the others. In general, it's best to avoid this situation in the first place by trying not to have multiple related PRs in flight at the same time. Still, sometimes that's not possible and doing a regular merge is the lesser evil.

Another occasion in which a regular merge makes more sense is a PR where you've deliberately created a series of commits each of which makes sense in its own right. For example: a PR which gradually propagates a refactoring operation through the codebase, or a PR which is the culmination of several other PRs. In this case the ability to figure out when a particular change/bug was introduced could be very useful.

Ultimately: this is not a hard-and-fast-rule. If in doubt, ask yourself “do each of the commits I am about to merge make sense in their own right”, but remember that we're just doing our best to balance “keeping the commit history clean” with other factors.

Git branching model

A lot of words have been written in the past about git branching models (no really, a lot). I tend to think the whole thing is overblown. Fundamentally, it's not that complicated. Here's how we do it.

Let's start with a picture:

branching model

It looks complicated, but it's really not. There's one basic rule: anyone is free to merge from any more-stable branch to any less-stable branch at any time2. (The principle behind this is that if a change is good enough for the more-stable branch, then it's also good enough go put in a less-stable branch.)

Meanwhile, merging (or squashing, as per the above) from a less-stable to a more-stable branch is a deliberate action in which you want to publish a change or a set of changes to (some subset of) the world: for example, this happens when a PR is landed, or as part of our release process.

So, what counts as a more- or less-stable branch? A little reflection will show that our active branches are ordered thus, from more-stable to less-stable:

  • master (tracks our last release).
  • release-vX.Y (the branch where we prepare the next release)3.
  • PR branches which are targeting the release.
  • develop (our "mainline" branch containing our bleeding-edge).
  • regular PR branches.

The corollary is: if you have a bugfix that needs to land in both release-vX.Y and develop, then you should base your PR on release-vX.Y, get it merged there, and then merge from release-vX.Y to develop. (If a fix lands in develop and we later need it in a release-branch, we can of course cherry-pick it, but landing it in the release branch first helps reduce the chance of annoying conflicts.)

[1]: “Squash and merge” is GitHub's term for this operation. Given that there is no merge involved, I'm not convinced it's the most intuitive name. ^

[2]: Well, anyone with commit access.^

[3]: Very, very occasionally (I think this has happened once in the history of Synapse), we've had two releases in flight at once. Obviously, release-v1.2 is more-stable than release-v1.3. ^

OpenTracing

Background

OpenTracing is a semi-standard being adopted by a number of distributed tracing platforms. It is a common api for facilitating vendor-agnostic tracing instrumentation. That is, we can use the OpenTracing api and select one of a number of tracer implementations to do the heavy lifting in the background. Our current selected implementation is Jaeger.

OpenTracing is a tool which gives an insight into the causal relationship of work done in and between servers. The servers each track events and report them to a centralised server - in Synapse's case: Jaeger. The basic unit used to represent events is the span. The span roughly represents a single piece of work that was done and the time at which it occurred. A span can have child spans, meaning that the work of the child had to be completed for the parent span to complete, or it can have follow-on spans which represent work that is undertaken as a result of the parent but is not depended on by the parent to in order to finish.

Since this is undertaken in a distributed environment a request to another server, such as an RPC or a simple GET, can be considered a span (a unit or work) for the local server. This causal link is what OpenTracing aims to capture and visualise. In order to do this metadata about the local server's span, i.e the 'span context', needs to be included with the request to the remote.

It is up to the remote server to decide what it does with the spans it creates. This is called the sampling policy and it can be configured through Jaeger's settings.

For OpenTracing concepts see https://opentracing.io/docs/overview/what-is-tracing/.

For more information about Jaeger's implementation see https://www.jaegertracing.io/docs/

Setting up OpenTracing

To receive OpenTracing spans, start up a Jaeger server. This can be done using docker like so:

docker run -d --name jaeger \
  -p 6831:6831/udp \
  -p 6832:6832/udp \
  -p 5778:5778 \
  -p 16686:16686 \
  -p 14268:14268 \
  jaegertracing/all-in-one:1

Latest documentation is probably at https://www.jaegertracing.io/docs/latest/getting-started.

Enable OpenTracing in Synapse

OpenTracing is not enabled by default. It must be enabled in the homeserver config by uncommenting the config options under opentracing as shown in the sample config. For example:

opentracing:
  enabled: true
  homeserver_whitelist:
    - "mytrustedhomeserver.org"
    - "*.myotherhomeservers.com"

Homeserver whitelisting

The homeserver whitelist is configured using regular expressions. A list of regular expressions can be given and their union will be compared when propagating any spans contexts to another homeserver.

Though it's mostly safe to send and receive span contexts to and from untrusted users since span contexts are usually opaque ids it can lead to two problems, namely:

  • If the span context is marked as sampled by the sending homeserver the receiver will sample it. Therefore two homeservers with wildly different sampling policies could incur higher sampling counts than intended.
  • Sending servers can attach arbitrary data to spans, known as 'baggage'. For safety this has been disabled in Synapse but that doesn't prevent another server sending you baggage which will be logged to OpenTracing's logs.

Configuring Jaeger

Sampling strategies can be set as in this document: https://www.jaegertracing.io/docs/latest/sampling/.

Synapse database schema files

Synapse's database schema is stored in the synapse.storage.schema module.

Logical databases

Synapse supports splitting its datastore across multiple physical databases (which can be useful for large installations), and the schema files are therefore split according to the logical database they apply to.

At the time of writing, the following "logical" databases are supported:

  • state - used to store Matrix room state (more specifically, state_groups, their relationships and contents).
  • main - stores everything else.

Additionally, the common directory contains schema files for tables which must be present on all physical databases.

Synapse schema versions

Synapse manages its database schema via "schema versions". These are mainly used to help avoid confusion if the Synapse codebase is rolled back after the database is updated. They work as follows:

  • The Synapse codebase defines a constant synapse.storage.schema.SCHEMA_VERSION which represents the expectations made about the database by that version. For example, as of Synapse v1.36, this is 59.

  • The database stores a "compatibility version" in schema_compat_version.compat_version which defines the SCHEMA_VERSION of the oldest version of Synapse which will work with the database. On startup, if compat_version is found to be newer than SCHEMA_VERSION, Synapse will refuse to start.

    Synapse automatically updates this field from synapse.storage.schema.SCHEMA_COMPAT_VERSION.

  • Whenever a backwards-incompatible change is made to the database format (normally via a delta file), synapse.storage.schema.SCHEMA_COMPAT_VERSION is also updated so that administrators can not accidentally roll back to a too-old version of Synapse.

Generally, the goal is to maintain compatibility with at least one or two previous releases of Synapse, so any substantial change tends to require multiple releases and a bit of forward-planning to get right.

As a worked example: we want to remove the room_stats_historical table. Here is how it might pan out.

  1. Replace any code that reads from room_stats_historical with alternative implementations, but keep writing to it in case of rollback to an earlier version. Also, increase synapse.storage.schema.SCHEMA_VERSION. In this instance, there is no existing code which reads from room_stats_historical, so our starting point is:

    v1.36.0: SCHEMA_VERSION=59, SCHEMA_COMPAT_VERSION=59

  2. Next (say in Synapse v1.37.0): remove the code that writes to room_stats_historical, but don’t yet remove the table in case of rollback to v1.36.0. Again, we increase synapse.storage.schema.SCHEMA_VERSION, but because we have not broken compatibility with v1.36, we do not yet update SCHEMA_COMPAT_VERSION. We now have:

    v1.37.0: SCHEMA_VERSION=60, SCHEMA_COMPAT_VERSION=59.

  3. Later (say in Synapse v1.38.0): we can remove the table altogether. This will break compatibility with v1.36.0, so we must update SCHEMA_COMPAT_VERSION accordingly. There is no need to update synapse.storage.schema.SCHEMA_VERSION, since there is no change to the Synapse codebase here. So we end up with:

    v1.38.0: SCHEMA_VERSION=60, SCHEMA_COMPAT_VERSION=60.

If in doubt about whether to update SCHEMA_VERSION or not, it is generally best to lean towards doing so.

Full schema dumps

In the full_schemas directories, only the most recently-numbered snapshot is used (54 at the time of writing). Older snapshots (eg, 16) are present for historical reference only.

Building full schema dumps

If you want to recreate these schemas, they need to be made from a database that has had all background updates run.

To do so, use scripts-dev/make_full_schema.sh. This will produce new full.sql.postgres and full.sql.sqlite files.

Ensure postgres is installed, then run:

./scripts-dev/make_full_schema.sh -p postgres_username -o output_dir/

NB at the time of writing, this script predates the split into separate state/main databases so will require updates to handle that correctly.

Boolean columns

Boolean columns require special treatment, since SQLite treats booleans the same as integers.

There are three separate aspects to this:

  • Any new boolean column must be added to the BOOLEAN_COLUMNS list in scripts/synapse_port_db. This tells the port script to cast the integer value from SQLite to a boolean before writing the value to the postgres database.

  • Before SQLite 3.23, TRUE and FALSE were not recognised as constants by SQLite, and the IS [NOT] TRUE/IS [NOT] FALSE operators were not supported. This makes it necessary to avoid using TRUE and FALSE constants in SQL commands.

    For example, to insert a TRUE value into the database, write:

    txn.execute("INSERT INTO tbl(col) VALUES (?)", (True, ))

  • Default values for new boolean columns present a particular difficulty. Generally it is best to create separate schema files for Postgres and SQLite. For example:

    # in 00delta.sql.postgres:
ALTER TABLE tbl ADD COLUMN col BOOLEAN DEFAULT FALSE;

    # in 00delta.sql.sqlite:
ALTER TABLE tbl ADD COLUMN col BOOLEAN DEFAULT 0;

    Note that there is a particularly insidious failure mode here: the Postgres flavour will be accepted by SQLite 3.22, but will give a column whose default value is the string "FALSE" - which, when cast back to a boolean in Python, evaluates to True.

Log Contexts

To help track the processing of individual requests, synapse uses a 'log context' to track which request it is handling at any given moment. This is done via a thread-local variable; a logging.Filter is then used to fish the information back out of the thread-local variable and add it to each log record.

Logcontexts are also used for CPU and database accounting, so that we can track which requests were responsible for high CPU use or database activity.

The synapse.logging.context module provides a facilities for managing the current log context (as well as providing the LoggingContextFilter class).

Deferreds make the whole thing complicated, so this document describes how it all works, and how to write code which follows the rules.

##Logcontexts without Deferreds

In the absence of any Deferred voodoo, things are simple enough. As with any code of this nature, the rule is that our function should leave things as it found them:

from synapse.logging import context         # omitted from future snippets

def handle_request(request_id):
    request_context = context.LoggingContext()

    calling_context = context.set_current_context(request_context)
    try:
        request_context.request = request_id
        do_request_handling()
        logger.debug("finished")
    finally:
        context.set_current_context(calling_context)

def do_request_handling():
    logger.debug("phew")  # this will be logged against request_id

LoggingContext implements the context management methods, so the above can be written much more succinctly as:

def handle_request(request_id):
    with context.LoggingContext() as request_context:
        request_context.request = request_id
        do_request_handling()
        logger.debug("finished")

def do_request_handling():
    logger.debug("phew")

Using logcontexts with Deferreds

Deferreds --- and in particular, defer.inlineCallbacks --- break the linear flow of code so that there is no longer a single entry point where we should set the logcontext and a single exit point where we should remove it.

Consider the example above, where do_request_handling needs to do some blocking operation, and returns a deferred:

@defer.inlineCallbacks
def handle_request(request_id):
    with context.LoggingContext() as request_context:
        request_context.request = request_id
        yield do_request_handling()
        logger.debug("finished")

In the above flow:

  • The logcontext is set
  • do_request_handling is called, and returns a deferred
  • handle_request yields the deferred
  • The inlineCallbacks wrapper of handle_request returns a deferred

So we have stopped processing the request (and will probably go on to start processing the next), without clearing the logcontext.

To circumvent this problem, synapse code assumes that, wherever you have a deferred, you will want to yield on it. To that end, whereever functions return a deferred, we adopt the following conventions:

Rules for functions returning deferreds:

  • If the deferred is already complete, the function returns with the same logcontext it started with.
  • If the deferred is incomplete, the function clears the logcontext before returning; when the deferred completes, it restores the logcontext before running any callbacks.

That sounds complicated, but actually it means a lot of code (including the example above) "just works". There are two cases:

  • If do_request_handling returns a completed deferred, then the logcontext will still be in place. In this case, execution will continue immediately after the yield; the "finished" line will be logged against the right context, and the with block restores the original context before we return to the caller.

  • If the returned deferred is incomplete, do_request_handling clears the logcontext before returning. The logcontext is therefore clear when handle_request yields the deferred. At that point, the inlineCallbacks wrapper adds a callback to the deferred, and returns another (incomplete) deferred to the caller, and it is safe to begin processing the next request.

    Once do_request_handling's deferred completes, it will reinstate the logcontext, before running the callback added by the inlineCallbacks wrapper. That callback runs the second half of handle_request, so again the "finished" line will be logged against the right context, and the with block restores the original context.

As an aside, it's worth noting that handle_request follows our rules -though that only matters if the caller has its own logcontext which it cares about.

The following sections describe pitfalls and helpful patterns when implementing these rules.

Always yield your deferreds

Whenever you get a deferred back from a function, you should yield on it as soon as possible. (Returning it directly to your caller is ok too, if you're not doing inlineCallbacks.) Do not pass go; do not do any logging; do not call any other functions.

@defer.inlineCallbacks
def fun():
    logger.debug("starting")
    yield do_some_stuff()       # just like this

    d = more_stuff()
    result = yield d            # also fine, of course

    return result

def nonInlineCallbacksFun():
    logger.debug("just a wrapper really")
    return do_some_stuff()      # this is ok too - the caller will yield on
                                # it anyway.

Provided this pattern is followed all the way back up to the callchain to where the logcontext was set, this will make things work out ok: provided do_some_stuff and more_stuff follow the rules above, then so will fun (as wrapped by inlineCallbacks) and nonInlineCallbacksFun.

It's all too easy to forget to yield: for instance if we forgot that do_some_stuff returned a deferred, we might plough on regardless. This leads to a mess; it will probably work itself out eventually, but not before a load of stuff has been logged against the wrong context. (Normally, other things will break, more obviously, if you forget to yield, so this tends not to be a major problem in practice.)

Of course sometimes you need to do something a bit fancier with your Deferreds - not all code follows the linear A-then-B-then-C pattern. Notes on implementing more complex patterns are in later sections.

Where you create a new Deferred, make it follow the rules

Most of the time, a Deferred comes from another synapse function. Sometimes, though, we need to make up a new Deferred, or we get a Deferred back from external code. We need to make it follow our rules.

The easy way to do it is with a combination of defer.inlineCallbacks, and context.PreserveLoggingContext. Suppose we want to implement sleep, which returns a deferred which will run its callbacks after a given number of seconds. That might look like:

# not a logcontext-rules-compliant function
def get_sleep_deferred(seconds):
    d = defer.Deferred()
    reactor.callLater(seconds, d.callback, None)
    return d

That doesn't follow the rules, but we can fix it by wrapping it with PreserveLoggingContext and yield ing on it:

@defer.inlineCallbacks
def sleep(seconds):
    with PreserveLoggingContext():
        yield get_sleep_deferred(seconds)

This technique works equally for external functions which return deferreds, or deferreds we have made ourselves.

You can also use context.make_deferred_yieldable, which just does the boilerplate for you, so the above could be written:

def sleep(seconds):
    return context.make_deferred_yieldable(get_sleep_deferred(seconds))

Fire-and-forget

Sometimes you want to fire off a chain of execution, but not wait for its result. That might look a bit like this:

@defer.inlineCallbacks
def do_request_handling():
    yield foreground_operation()

    # *don't* do this
    background_operation()

    logger.debug("Request handling complete")

@defer.inlineCallbacks
def background_operation():
    yield first_background_step()
    logger.debug("Completed first step")
    yield second_background_step()
    logger.debug("Completed second step")

The above code does a couple of steps in the background after do_request_handling has finished. The log lines are still logged against the request_context logcontext, which may or may not be desirable. There are two big problems with the above, however. The first problem is that, if background_operation returns an incomplete Deferred, it will expect its caller to yield immediately, so will have cleared the logcontext. In this example, that means that 'Request handling complete' will be logged without any context.

The second problem, which is potentially even worse, is that when the Deferred returned by background_operation completes, it will restore the original logcontext. There is nothing waiting on that Deferred, so the logcontext will leak into the reactor and possibly get attached to some arbitrary future operation.

There are two potential solutions to this.

One option is to surround the call to background_operation with a PreserveLoggingContext call. That will reset the logcontext before starting background_operation (so the context restored when the deferred completes will be the empty logcontext), and will restore the current logcontext before continuing the foreground process:

@defer.inlineCallbacks
def do_request_handling():
    yield foreground_operation()

    # start background_operation off in the empty logcontext, to
    # avoid leaking the current context into the reactor.
    with PreserveLoggingContext():
        background_operation()

    # this will now be logged against the request context
    logger.debug("Request handling complete")

Obviously that option means that the operations done in background_operation would be not be logged against a logcontext (though that might be fixed by setting a different logcontext via a with LoggingContext(...) in background_operation).

The second option is to use context.run_in_background, which wraps a function so that it doesn't reset the logcontext even when it returns an incomplete deferred, and adds a callback to the returned deferred to reset the logcontext. In other words, it turns a function that follows the Synapse rules about logcontexts and Deferreds into one which behaves more like an external function --- the opposite operation to that described in the previous section. It can be used like this:

@defer.inlineCallbacks
def do_request_handling():
    yield foreground_operation()

    context.run_in_background(background_operation)

    # this will now be logged against the request context
    logger.debug("Request handling complete")

Passing synapse deferreds into third-party functions

A typical example of this is where we want to collect together two or more deferred via defer.gatherResults:

d1 = operation1()
d2 = operation2()
d3 = defer.gatherResults([d1, d2])

This is really a variation of the fire-and-forget problem above, in that we are firing off d1 and d2 without yielding on them. The difference is that we now have third-party code attached to their callbacks. Anyway either technique given in the Fire-and-forget section will work.

Of course, the new Deferred returned by gatherResults needs to be wrapped in order to make it follow the logcontext rules before we can yield it, as described in Where you create a new Deferred, make it follow the rules.

So, option one: reset the logcontext before starting the operations to be gathered:

@defer.inlineCallbacks
def do_request_handling():
    with PreserveLoggingContext():
        d1 = operation1()
        d2 = operation2()
        result = yield defer.gatherResults([d1, d2])

In this case particularly, though, option two, of using context.preserve_fn almost certainly makes more sense, so that operation1 and operation2 are both logged against the original logcontext. This looks like:

@defer.inlineCallbacks
def do_request_handling():
    d1 = context.preserve_fn(operation1)()
    d2 = context.preserve_fn(operation2)()

    with PreserveLoggingContext():
        result = yield defer.gatherResults([d1, d2])

Was all this really necessary?

The conventions used work fine for a linear flow where everything happens in series via defer.inlineCallbacks and yield, but are certainly tricky to follow for any more exotic flows. It's hard not to wonder if we could have done something else.

We're not going to rewrite Synapse now, so the following is entirely of academic interest, but I'd like to record some thoughts on an alternative approach.

I briefly prototyped some code following an alternative set of rules. I think it would work, but I certainly didn't get as far as thinking how it would interact with concepts as complicated as the cache descriptors.

My alternative rules were:

  • functions always preserve the logcontext of their caller, whether or not they are returning a Deferred.
  • Deferreds returned by synapse functions run their callbacks in the same context as the function was orignally called in.

The main point of this scheme is that everywhere that sets the logcontext is responsible for clearing it before returning control to the reactor.

So, for example, if you were the function which started a with LoggingContext block, you wouldn't yield within it --- instead you'd start off the background process, and then leave the with block to wait for it:

def handle_request(request_id):
    with context.LoggingContext() as request_context:
        request_context.request = request_id
        d = do_request_handling()

    def cb(r):
        logger.debug("finished")

    d.addCallback(cb)
    return d

(in general, mixing with LoggingContext blocks and defer.inlineCallbacks in the same function leads to slighly counter-intuitive code, under this scheme).

Because we leave the original with block as soon as the Deferred is returned (as opposed to waiting for it to be resolved, as we do today), the logcontext is cleared before control passes back to the reactor; so if there is some code within do_request_handling which needs to wait for a Deferred to complete, there is no need for it to worry about clearing the logcontext before doing so:

def handle_request():
    r = do_some_stuff()
    r.addCallback(do_some_more_stuff)
    return r

--- and provided do_some_stuff follows the rules of returning a Deferred which runs its callbacks in the original logcontext, all is happy.

The business of a Deferred which runs its callbacks in the original logcontext isn't hard to achieve --- we have it today, in the shape of context._PreservingContextDeferred:

def do_some_stuff():
    deferred = do_some_io()
    pcd = _PreservingContextDeferred(LoggingContext.current_context())
    deferred.chainDeferred(pcd)
    return pcd

It turns out that, thanks to the way that Deferreds chain together, we automatically get the property of a context-preserving deferred with defer.inlineCallbacks, provided the final Defered the function yields on has that property. So we can just write:

@defer.inlineCallbacks
def handle_request():
    yield do_some_stuff()
    yield do_some_more_stuff()

To conclude: I think this scheme would have worked equally well, with less danger of messing it up, and probably made some more esoteric code easier to write. But again --- changing the conventions of the entire Synapse codebase is not a sensible option for the marginal improvement offered.

A note on garbage-collection of Deferred chains

It turns out that our logcontext rules do not play nicely with Deferred chains which get orphaned and garbage-collected.

Imagine we have some code that looks like this:

listener_queue = []

def on_something_interesting():
    for d in listener_queue:
        d.callback("foo")

@defer.inlineCallbacks
def await_something_interesting():
    new_deferred = defer.Deferred()
    listener_queue.append(new_deferred)

    with PreserveLoggingContext():
        yield new_deferred

Obviously, the idea here is that we have a bunch of things which are waiting for an event. (It's just an example of the problem here, but a relatively common one.)

Now let's imagine two further things happen. First of all, whatever was waiting for the interesting thing goes away. (Perhaps the request times out, or something even more interesting happens.)

Secondly, let's suppose that we decide that the interesting thing is never going to happen, and we reset the listener queue:

def reset_listener_queue():
    listener_queue.clear()

So, both ends of the deferred chain have now dropped their references, and the deferred chain is now orphaned, and will be garbage-collected at some point. Note that await_something_interesting is a generator function, and when Python garbage-collects generator functions, it gives them a chance to clean up by making the yield raise a GeneratorExit exception. In our case, that means that the __exit__ handler of PreserveLoggingContext will carefully restore the request context, but there is now nothing waiting for its return, so the request context is never cleared.

To reiterate, this problem only arises when both ends of a deferred chain are dropped. Dropping the the reference to a deferred you're supposed to be calling is probably bad practice, so this doesn't actually happen too much. Unfortunately, when it does happen, it will lead to leaked logcontexts which are incredibly hard to track down.

Replication Architecture

Motivation

We'd like to be able to split some of the work that synapse does into multiple python processes. In theory multiple synapse processes could share a single postgresql database and we'd scale up by running more synapse processes. However much of synapse assumes that only one process is interacting with the database, both for assigning unique identifiers when inserting into tables, notifying components about new updates, and for invalidating its caches.

So running multiple copies of the current code isn't an option. One way to run multiple processes would be to have a single writer process and multiple reader processes connected to the same database. In order to do this we'd need a way for the reader process to invalidate its in-memory caches when an update happens on the writer. One way to do this is for the writer to present an append-only log of updates which the readers can consume to invalidate their caches and to push updates to listening clients or pushers.

Synapse already stores much of its data as an append-only log so that it can correctly respond to /sync requests so the amount of code changes needed to expose the append-only log to the readers should be fairly minimal.

Architecture

The Replication Protocol

See tcp_replication.md

The Slaved DataStore

There are read-only version of the synapse storage layer in synapse/replication/slave/storage that use the response of the replication API to invalidate their caches.

TCP Replication

Motivation

Previously the workers used an HTTP long poll mechanism to get updates from the master, which had the problem of causing a lot of duplicate work on the server. This TCP protocol replaces those APIs with the aim of increased efficiency.

Overview

The protocol is based on fire and forget, line based commands. An example flow would be (where '>' indicates master to worker and '<' worker to master flows):

> SERVER example.com
< REPLICATE
> POSITION events master 53 53
> RDATA events master 54 ["$foo1:bar.com", ...]
> RDATA events master 55 ["$foo4:bar.com", ...]

The example shows the server accepting a new connection and sending its identity with the SERVER command, followed by the client server to respond with the position of all streams. The server then periodically sends RDATA commands which have the format RDATA <stream_name> <instance_name> <token> <row>, where the format of <row> is defined by the individual streams. The <instance_name> is the name of the Synapse process that generated the data (usually "master").

Error reporting happens by either the client or server sending an ERROR command, and usually the connection will be closed.

Since the protocol is a simple line based, its possible to manually connect to the server using a tool like netcat. A few things should be noted when manually using the protocol:

  • The federation stream is only available if federation sending has been disabled on the main process.
  • The server will only time connections out that have sent a PING command. If a ping is sent then the connection will be closed if no further commands are receieved within 15s. Both the client and server protocol implementations will send an initial PING on connection and ensure at least one command every 5s is sent (not necessarily PING).
  • RDATA commands usually include a numeric token, however if the stream has multiple rows to replicate per token the server will send multiple RDATA commands, with all but the last having a token of batch. See the documentation on commands.RdataCommand for further details.

Architecture

The basic structure of the protocol is line based, where the initial word of each line specifies the command. The rest of the line is parsed based on the command. For example, the RDATA command is defined as:

RDATA <stream_name> <instance_name> <token> <row_json>

(Note that <row_json> may contains spaces, but cannot contain newlines.)

Blank lines are ignored.

Keep alives

Both sides are expected to send at least one command every 5s or so, and should send a PING command if necessary. If either side do not receive a command within e.g. 15s then the connection should be closed.

Because the server may be connected to manually using e.g. netcat, the timeouts aren't enabled until an initial PING command is seen. Both the client and server implementations below send a PING command immediately on connection to ensure the timeouts are enabled.

This ensures that both sides can quickly realize if the tcp connection has gone and handle the situation appropriately.

Start up

When a new connection is made, the server:

  • Sends a SERVER command, which includes the identity of the server, allowing the client to detect if its connected to the expected server
  • Sends a PING command as above, to enable the client to time out connections promptly.

The client:

  • Sends a NAME command, allowing the server to associate a human friendly name with the connection. This is optional.
  • Sends a PING as above
  • Sends a REPLICATE to get the current position of all streams.
  • On receipt of a SERVER command, checks that the server name matches the expected server name.

Error handling

If either side detects an error it can send an ERROR command and close the connection.

If the client side loses the connection to the server it should reconnect, following the steps above.

Congestion

If the server sends messages faster than the client can consume them the server will first buffer a (fairly large) number of commands and then disconnect the client. This ensures that we don't queue up an unbounded number of commands in memory and gives us a potential oppurtunity to squawk loudly. When/if the client recovers it can reconnect to the server and ask for missed messages.

Reliability

In general the replication stream should be considered an unreliable transport since e.g. commands are not resent if the connection disappears.

The exception to that are the replication streams, i.e. RDATA commands, since these include tokens which can be used to restart the stream on connection errors.

The client should keep track of the token in the last RDATA command received for each stream so that on reconneciton it can start streaming from the correct place. Note: not all RDATA have valid tokens due to batching. See RdataCommand for more details.

Example

An example iteraction is shown below. Each line is prefixed with '>' or '<' to indicate which side is sending, these are not included on the wire:

* connection established *
> SERVER localhost:8823
> PING 1490197665618
< NAME synapse.app.appservice
< PING 1490197665618
< REPLICATE
> POSITION events master 1 1
> POSITION backfill master 1 1
> POSITION caches master 1 1
> RDATA caches master 2 ["get_user_by_id",["@01register-user:localhost:8823"],1490197670513]
> RDATA events master 14 ["$149019767112vOHxz:localhost:8823",
    "!AFDCvgApUmpdfVjIXm:localhost:8823","m.room.guest_access","",null]
< PING 1490197675618
> ERROR server stopping
* connection closed by server *

The POSITION command sent by the server is used to set the clients position without needing to send data with the RDATA command.

An example of a batched set of RDATA is:

> RDATA caches master batch ["get_user_by_id",["@test:localhost:8823"],1490197670513]
> RDATA caches master batch ["get_user_by_id",["@test2:localhost:8823"],1490197670513]
> RDATA caches master batch ["get_user_by_id",["@test3:localhost:8823"],1490197670513]
> RDATA caches master 54 ["get_user_by_id",["@test4:localhost:8823"],1490197670513]

In this case the client shouldn't advance their caches token until it sees the the last RDATA.

List of commands

The list of valid commands, with which side can send it: server (S) or client (C):

SERVER (S)

Sent at the start to identify which server the client is talking to

RDATA (S)

A single update in a stream

POSITION (S)

On receipt of a POSITION command clients should check if they have missed any updates, and if so then fetch them out of band. Sent in response to a REPLICATE command (but can happen at any time).

The POSITION command includes the source of the stream. Currently all streams are written by a single process (usually "master"). If fetching missing updates via HTTP API, rather than via the DB, then processes should make the request to the appropriate process.

Two positions are included, the "new" position and the last position sent respectively. This allows servers to tell instances that the positions have advanced but no data has been written, without clients needlessly checking to see if they have missed any updates.

ERROR (S, C)

There was an error

PING (S, C)

Sent periodically to ensure the connection is still alive

NAME (C)

Sent at the start by client to inform the server who they are

REPLICATE (C)

Asks the server for the current position of all streams.

USER_SYNC (C)

A user has started or stopped syncing on this process.

CLEAR_USER_SYNC (C)

The server should clear all associated user sync data from the worker.

This is used when a worker is shutting down.

FEDERATION_ACK (C)

Acknowledge receipt of some federation data

REMOTE_SERVER_UP (S, C)

Inform other processes that a remote server may have come back online.

See synapse/replication/tcp/commands.py for a detailed description and the format of each command.

Cache Invalidation Stream

The cache invalidation stream is used to inform workers when they need to invalidate any of their caches in the data store. This is done by streaming all cache invalidations done on master down to the workers, assuming that any caches on the workers also exist on the master.

Each individual cache invalidation results in a row being sent down replication, which includes the cache name (the name of the function) and they key to invalidate. For example:

> RDATA caches master 550953771 ["get_user_by_id", ["@bob:example.com"], 1550574873251]

Alternatively, an entire cache can be invalidated by sending down a null instead of the key. For example:

> RDATA caches master 550953772 ["get_user_by_id", null, 1550574873252]

However, there are times when a number of caches need to be invalidated at the same time with the same key. To reduce traffic we batch those invalidations into a single poke by defining a special cache name that workers understand to mean to expand to invalidate the correct caches.

Currently the special cache names are declared in synapse/storage/_base.py and are:

  1. cs_cache_fake ─ invalidates caches that depend on the current state

Internal Documentation

This section covers implementation documentation for various parts of Synapse.

If a developer is planning to make a change to a feature of Synapse, it can be useful for general documentation of how that feature is implemented to be available. This saves the developer time in place of needing to understand how the feature works by reading the code.

Documentation that would be more useful for the perspective of a system administrator, rather than a developer who's intending to change to code, should instead be placed under the Usage section of the documentation.

How to test SAML as a developer without a server

https://capriza.github.io/samling/samling.html (https://github.com/capriza/samling) is a great resource for being able to tinker with the SAML options within Synapse without needing to deploy and configure a complicated software stack.

To make Synapse (and therefore Riot) use it:

  1. Use the samling.html URL above or deploy your own and visit the IdP Metadata tab.
  2. Copy the XML to your clipboard.
  3. On your Synapse server, create a new file samling.xml next to your homeserver.yaml with the XML from step 2 as the contents.
  4. Edit your homeserver.yaml to include: 
    saml2_config:
  sp_config:
    allow_unknown_attributes: true  # Works around a bug with AVA Hashes: https://github.com/IdentityPython/pysaml2/issues/388
    metadata:
      local: ["samling.xml"]
  5. Ensure that your homeserver.yaml has a setting for public_baseurl: 
    public_baseurl: http://localhost:8080/
  6. Run apt-get install xmlsec1 and pip install --upgrade --force 'pysaml2>=4.5.0' to ensure the dependencies are installed and ready to go.
  7. Restart Synapse.

Then in Riot:

  1. Visit the login page with a Riot pointing at your homeserver.
  2. Click the Single Sign-On button.
  3. On the samling page, enter a Name Identifier and add a SAML Attribute for uid=your_localpart. The response must also be signed.
  4. Click "Next".
  5. Click "Post Response" (change nothing).
  6. You should be logged in.

If you try and repeat this process, you may be automatically logged in using the information you gave previously. To fix this, open your developer console (F12 or Ctrl+Shift+I) while on the samling page and clear the site data. In Chrome, this will be a button on the Application tab.

How to test CAS as a developer without a server

The django-mama-cas project is an easy to run CAS implementation built on top of Django.

Prerequisites

  1. Create a new virtualenv: python3 -m venv <your virtualenv>
  2. Activate your virtualenv: source /path/to/your/virtualenv/bin/activate
  3. Install Django and django-mama-cas: 
    python -m pip install "django<3" "django-mama-cas==2.4.0"
  4. Create a Django project in the current directory: 
    django-admin startproject cas_test .
  5. Follow the install directions for django-mama-cas
  6. Setup the SQLite database: python manage.py migrate
  7. Create a user: 
    python manage.py createsuperuser
    1. Use whatever you want as the username and password.
    2. Leave the other fields blank.
  8. Use the built-in Django test server to serve the CAS endpoints on port 8000: 
    python manage.py runserver

You should now have a Django project configured to serve CAS authentication with a single user created.

Configure Synapse (and Element) to use CAS

  1. Modify your homeserver.yaml to enable CAS and point it to your locally running Django test server: 
    cas_config:
  enabled: true
  server_url: "http://localhost:8000"
  service_url: "http://localhost:8081"
  #displayname_attribute: name
  #required_attributes:
  #    name: value
  2. Restart Synapse.

Note that the above configuration assumes the homeserver is running on port 8081 and that the CAS server is on port 8000, both on localhost.

Testing the configuration

Then in Element:

  1. Visit the login page with a Element pointing at your homeserver.
  2. Click the Single Sign-On button.
  3. Login using the credentials created with createsuperuser.
  4. You should be logged in.

If you want to repeat this process you'll need to manually logout first:

  1. http://localhost:8000/admin/
  2. Click "logout" in the top right.

Auth Chain Difference Algorithm

The auth chain difference algorithm is used by V2 state resolution, where a naive implementation can be a significant source of CPU and DB usage.

Definitions

A state set is a set of state events; e.g. the input of a state resolution algorithm is a collection of state sets.

The auth chain of a set of events are all the events' auth events and their auth events, recursively (i.e. the events reachable by walking the graph induced by an event's auth events links).

The auth chain difference of a collection of state sets is the union minus the intersection of the sets of auth chains corresponding to the state sets, i.e an event is in the auth chain difference if it is reachable by walking the auth event graph from at least one of the state sets but not from all of the state sets.

Breadth First Walk Algorithm

A way of calculating the auth chain difference without calculating the full auth chains for each state set is to do a parallel breadth first walk (ordered by depth) of each state set's auth chain. By tracking which events are reachable from each state set we can finish early if every pending event is reachable from every state set.

This can work well for state sets that have a small auth chain difference, but can be very inefficient for larger differences. However, this algorithm is still used if we don't have a chain cover index for the room (e.g. because we're in the process of indexing it).

Chain Cover Index

Synapse computes auth chain differences by pre-computing a "chain cover" index for the auth chain in a room, allowing efficient reachability queries like "is event A in the auth chain of event B". This is done by assigning every event a chain ID and sequence number (e.g. (5,3)), and having a map of links between chains (e.g. (5,3) -> (2,4)) such that A is reachable by B (i.e. A is in the auth chain of B) if and only if either:

  1. A and B have the same chain ID and A's sequence number is less than B's sequence number; or
  2. there is a link L between B's chain ID and A's chain ID such that L.start_seq_no <= B.seq_no and A.seq_no <= L.end_seq_no.

There are actually two potential implementations, one where we store links from each chain to every other reachable chain (the transitive closure of the links graph), and one where we remove redundant links (the transitive reduction of the links graph) e.g. if we have chains C3 -> C2 -> C1 then the link C3 -> C1 would not be stored. Synapse uses the former implementations so that it doesn't need to recurse to test reachability between chains.

Example

An example auth graph would look like the following, where chains have been formed based on type/state_key and are denoted by colour and are labelled with (chain ID, sequence number). Links are denoted by the arrows (links in grey are those that would be remove in the second implementation described above).

Example

Note that we don't include all links between events and their auth events, as most of those links would be redundant. For example, all events point to the create event, but each chain only needs the one link from it's base to the create event.

Using the Index

This index can be used to calculate the auth chain difference of the state sets by looking at the chain ID and sequence numbers reachable from each state set:

  1. For every state set lookup the chain ID/sequence numbers of each state event
  2. Use the index to find all chains and the maximum sequence number reachable from each state set.
  3. The auth chain difference is then all events in each chain that have sequence numbers between the maximum sequence number reachable from any state set and the minimum reachable by all state sets (if any).

Note that steps 2 is effectively calculating the auth chain for each state set (in terms of chain IDs and sequence numbers), and step 3 is calculating the difference between the union and intersection of the auth chains.

Worked Example

For example, given the above graph, we can calculate the difference between state sets consisting of:

  1. S1: Alice's invite (4,1) and Bob's second join (2,2); and
  2. S2: Alice's second join (4,3) and Bob's first join (2,1).

Using the index we see that the following auth chains are reachable from each state set:

  1. S1: (1,1), (2,2), (3,1) & (4,1)
  2. S2: (1,1), (2,1), (3,2) & (4,3)

And so, for each the ranges that are in the auth chain difference:

  1. Chain 1: None, (since everything can reach the create event).
  2. Chain 2: The range (1, 2] (i.e. just 2), as 1 is reachable by all state sets and the maximum reachable is 2 (corresponding to Bob's second join).
  3. Chain 3: Similarly the range (1, 2] (corresponding to the second power level).
  4. Chain 4: The range (1, 3] (corresponding to both of Alice's joins).

So the final result is: Bob's second join (2,2), the second power level (3,2) and both of Alice's joins (4,2) & (4,3).

Media Repository

Synapse implementation-specific details for the media repository

The media repository is where attachments and avatar photos are stored. It stores attachment content and thumbnails for media uploaded by local users. It caches attachment content and thumbnails for media uploaded by remote users.

Storage

Each item of media is assigned a media_id when it is uploaded. The media_id is a randomly chosen, URL safe 24 character string.

Metadata such as the MIME type, upload time and length are stored in the sqlite3 database indexed by media_id.

Content is stored on the filesystem under a "local_content" directory.

Thumbnails are stored under a "local_thumbnails" directory.

The item with media_id "aabbccccccccdddddddddddd" is stored under "local_content/aa/bb/ccccccccdddddddddddd". Its thumbnail with width 128 and height 96 and type "image/jpeg" is stored under "local_thumbnails/aa/bb/ccccccccdddddddddddd/128-96-image-jpeg"

Remote content is cached under "remote_content" directory. Each item of remote content is assigned a local "filesystem_id" to ensure that the directory structure "remote_content/server_name/aa/bb/ccccccccdddddddddddd" is appropriate. Thumbnails for remote content are stored under "remote_thumbnails/server_name/..."

Room and User Statistics

Synapse maintains room and user statistics (as well as a cache of room state), in various tables. These can be used for administrative purposes but are also used when generating the public room directory.

Synapse Developer Documentation

High-Level Concepts

Definitions

  • subject: Something we are tracking stats about – currently a room or user.
  • current row: An entry for a subject in the appropriate current statistics table. Each subject can have only one.
  • historical row: An entry for a subject in the appropriate historical statistics table. Each subject can have any number of these.

Overview

Stats are maintained as time series. There are two kinds of column:

  • absolute columns – where the value is correct for the time given by end_ts in the stats row. (Imagine a line graph for these values)
    • They can also be thought of as 'gauges' in Prometheus, if you are familiar.
  • per-slice columns – where the value corresponds to how many of the occurrences occurred within the time slice given by (end_ts − bucket_size)…end_ts or start_ts…end_ts. (Imagine a histogram for these values)

Stats are maintained in two tables (for each type): current and historical.

Current stats correspond to the present values. Each subject can only have one entry.

Historical stats correspond to values in the past. Subjects may have multiple entries.

Concepts around the management of stats

Current rows

Current rows contain the most up-to-date statistics for a room. They only contain absolute columns

Historical rows

Historical rows can always be considered to be valid for the time slice and end time specified.

  • historical rows will not exist for every time slice – they will be omitted if there were no changes. In this case, the following assumptions can be made to interpolate/recreate missing rows:
    • absolute fields have the same values as in the preceding row
    • per-slice fields are zero (0)
  • historical rows will not be retained forever – rows older than a configurable time will be purged.

Purge

The purging of historical rows is not yet implemented.

Deprecation Policy for Platform Dependencies

Synapse has a number of platform dependencies, including Python and PostgreSQL. This document outlines the policy towards which versions we support, and when we drop support for versions in the future.

Policy

Synapse follows the upstream support life cycles for Python and PostgreSQL, i.e. when a version reaches End of Life Synapse will withdraw support for that version in future releases.

Details on the upstream support life cycles for Python and PostgreSQL are documented at https://endoflife.date/python and https://endoflife.date/postgresql.

Context

It is important for system admins to have a clear understanding of the platform requirements of Synapse and its deprecation policies so that they can effectively plan upgrading their infrastructure ahead of time. This is especially important in contexts where upgrading the infrastructure requires auditing and approval from a security team, or where otherwise upgrading is a long process.

By following the upstream support life cycles Synapse can ensure that its dependencies continue to get security patches, while not requiring system admins to constantly update their platform dependencies to the latest versions.